I was running 4.4.3 Rooted with TWRP recovery. Bootloader was unlocked.
I accepted the 4.4.4 OTA update and when it was done I found I lost root.
Tried to go into recovery to install Supersu.zip but had also lost TWRP.
Just got the dead android with the ! mark.
My Boot loader is still unlocked. I ran fastboot. Verified that I got a device id with Fastboot devices.
Then used Fastboot to install openrecovery-twrp-2.6.3.1-manta.img
Completed with no errors. Rebooted the device and then shut it down.
Rebooted into Fastboot, selected recovery and I still get the dead Android with the ! mark.
What did I do wrong?
Len
If you want to stay stock here you go. Look at the last page or so and it also has a link to the newest TWRP which you need to get going again.
http://forum.xda-developers.com/showthread.php?t=2529492
sfobrien said:
If you want to stay stock here you go. Look at the last page or so and it also has a link to the newest TWRP which you need to get going again.
http://forum.xda-developers.com/showthread.php?t=2529492
Click to expand...
Click to collapse
No, I don't want to stay stock. I want to be able to install TWRP so I can flash SuperSu.zip and get root back. When I do a fast boot install of the TWRP Image, it completes with no errors but when I reboot into recovery, I get the dead Android with the exclamation point not TWRP
Lenster45 said:
No, I don't want to stay stock. I want to be able to install TWRP so I can flash SuperSu.zip and get root back. When I do a fast boot install of the TWRP Image, it completes with no errors but when I reboot into recovery, I get the dead Android with the exclamation point not TWRP
Click to expand...
Click to collapse
Since you took the OTA your bootloader may be locked. After you get it unlocked I gave you where to get the recovery you need, the one you have is not KitKat friendly.
Lenster45 said:
I was running 4.4.3 Rooted with TWRP recovery. Bootloader was unlocked.
I accepted the 4.4.4 OTA update and when it was done I found I lost root.
Tried to go into recovery to install Supersu.zip but had also lost TWRP.
Just got the dead android with the ! mark.
My Boot loader is still unlocked. I ran fastboot. Verified that I got a device id with Fastboot devices.
Then used Fastboot to install openrecovery-twrp-2.6.3.1-manta.img
Completed with no errors. Rebooted the device and then shut it down.
Rebooted into Fastboot, selected recovery and I still get the dead Android with the ! mark.
What did I do wrong?
Len
Click to expand...
Click to collapse
Well, you didn't do anything wrong per se. When you flash the OTA (which I assume you did in TWRP), you lose root and your custom recovery since it replaces it with stock. You did the right thing by fastboot flashing your custom recovery back. However, the only thing you did "wrong" was rebooting into the Android OS instead of booting into the newly flashed recovery first. After you flash the custom recovery, select the recovery option in the bootloader, and it will boot into your custom recovery. If you don't boot directly into your custom recovery, and instead boot into the OS, the recovery will revert back to stock, which is why you saw the dead Android with the ! mark (that is the stock recovery). Just fastboot flash TWRP again, and boot straight into it. Then, just flash the SuperSU zip and reboot system. You should be good to go.
EDIT: Oh, and having an unlocked bootloader has no effect on receiving an OTA or your ability to flash it. If your bootloader was unlocked before flashing an OTA, it will remain unlocked. The only way it would become locked again is if you locked it yourself. You can even completely flash the stock image, and the bootloader will remain unlocked.
charesa39;53763629
EDIT: Oh said:
Strange, had a friend who took the OTA awhile back and it locked the bootloader. It was a JB version maybe they changed it with KitKat ? ( he could have locked it prior to my getting it going who knows) Thanks for the info, have never used an OTA since I got my N10 when it first came out.
Click to expand...
Click to collapse
charesa39 said:
Well, you didn't do anything wrong per se. When you flash the OTA (which I assume you did in TWRP), you lose root and your custom recovery since it replaces it with stock. You did the right thing by fastboot flashing your custom recovery back. However, the only thing you did "wrong" was rebooting into the Android OS instead of booting into the newly flashed recovery first. After you flash the custom recovery, select the recovery option in the bootloader, and it will boot into your custom recovery. If you don't boot directly into your custom recovery, and instead boot into the OS, the recovery will revert back to stock, which is why you saw the dead Android with the ! mark (that is the stock recovery). Just fastboot flash TWRP again, and boot straight into it. Then, just flash the SuperSU zip and reboot system. You should be good to go.
EDIT: Oh, and having an unlocked bootloader has no effect on receiving an OTA or your ability to flash it. If your bootloader was unlocked before flashing an OTA, it will remain unlocked. The only way it would become locked again is if you locked it yourself. You can even completely flash the stock image, and the bootloader will remain unlocked.
Click to expand...
Click to collapse
That did it. Thanks
Hi,
Could you add a [SOLVED] tag to the title, as it is now solved ?
~Lord
"Dream On! Dream Until Your Dreams Come True!" - Dream On (Aerosmith)
Sent from my GT-I9505
Related
I was running stock 4.1.1 rooted with NO cwm and I accepted the OTA undate two days ago. Now, I have SU still installed but nothing can obtain root permissions. I used Wugz toolkit to reflash su binaries through TWRP a few times and still no dice. Any thoughts?
Trickee360 said:
I was running stock 4.1.1 rooted with NO cwm and I accepted the OTA undate two days ago. Now, I have SU still installed but nothing can obtain root permissions. I used Wugz toolkit to reflash su binaries through TWRP a few times and still no dice. Any thoughts?
Click to expand...
Click to collapse
Here you go. Just follow the directions. It works fine for 4.1.2.
http://www.talkandroid.com/guides/misc/how-to-unlock-and-root-the-nexus-7/
veeman said:
Here you go. Just follow the directions. It works fine for 4.1.2.
http://www.talkandroid.com/guides/misc/how-to-unlock-and-root-the-nexus-7/
Click to expand...
Click to collapse
Welp, I've never actually used adb to push anything manually myself, but now is as good as time as any to try it. The link to CWM on that page is dead. Where else can I get it?
Trickee360 said:
Welp, I've never actually used adb to push anything manually myself, but now is as good as time as any to try it. The link to CWM on that page is dead. Where else can I get it?
Click to expand...
Click to collapse
http://www.clockworkmod.com/rommanager
You can download the Touch Recovery on the right side for Google Nexus 7 version. But make sure when you put in
Code:
fastboot flash recovery recovery-clockwork-touch-6.0.1.0-grouper.img
for step 5. instead of what they put.
veeman said:
http://www.clockworkmod.com/rommanager
You can download the Touch Recovery on the right side for Google Nexus 7 version. But make sure when you put in
Code:
fastboot flash recovery recovery-clockwork-touch-6.0.1.0-grouper.img
for step 5. instead of what they put.
Click to expand...
Click to collapse
got it. thanks much
Will only boot to stock recovery
veeman said:
You can download the Touch Recovery on the right side for Google Nexus 7 version. But make sure when you put in
Code:
fastboot flash recovery recovery-clockwork-touch-6.0.1.0-grouper.img
for step 5. instead of what they put.
Click to expand...
Click to collapse
Every time I reboot into recovery from the bootloader after flashing any recovery (except stock), it fails to boot into recovery. What happens is it shows the Google/Unlocked screen for a couple seconds, goes black (this is where it should enter recovery), but then shows the Google screen again and boots normally. I have tried this with two CWM recoveries and a TWRP recovery, both plugged into a computer and not. when flashing recovery it says OKAY. It seems as if something has gotten corrupted.
Before updating to 4.1.2 everything was working. To get the 4.1.2 update to install, I had to revert back to stock recovery and also revert back to the stock wallet app. Now 'su' is still a command, but it does not do what it is supposed to and no apps have root.
:'(
jphilli85 said:
Every time I reboot into recovery from the bootloader after flashing any recovery (except stock), it fails to boot into recovery. What happens is it shows the Google/Unlocked screen for a couple seconds, goes black (this is where it should enter recovery), but then shows the Google screen again and boots normally. I have tried this with two CWM recoveries and a TWRP recovery, both plugged into a computer and not. when flashing recovery it says OKAY. It seems as if something has gotten corrupted.
Before updating to 4.1.2 everything was working. To get the 4.1.2 update to install, I had to revert back to stock recovery and also revert back to the stock wallet app. Now 'su' is still a command, but it does not do what it is supposed to and no apps have root.
:'(
Click to expand...
Click to collapse
You can just root again and you will have root access.
I lost root too, so I just opened wugtoolkit and hit root. no unlock needed so no loss of programs either.
jphilli85 said:
Every time I reboot into recovery from the bootloader after flashing any recovery (except stock), it fails to boot into recovery. What happens is it shows the Google/Unlocked screen for a couple seconds, goes black (this is where it should enter recovery), but then shows the Google screen again and boots normally. I have tried this with two CWM recoveries and a TWRP recovery, both plugged into a computer and not. when flashing recovery it says OKAY. It seems as if something has gotten corrupted.
Before updating to 4.1.2 everything was working. To get the 4.1.2 update to install, I had to revert back to stock recovery and also revert back to the stock wallet app. Now 'su' is still a command, but it does not do what it is supposed to and no apps have root.
:'(
Click to expand...
Click to collapse
Any news about this. I stay in the same problem.
Here's my experience:
Stock ROM, rooted, custom kernel.
Got the notification for the 4.1.2 OTA update, so I did a nandroid backup in TWRP. Then I flashed back to the stock recovery and boot.img.
I was thinking that I might lose root, based on other's problems. Looked into installing Root Keeper by Voodoo. In the description it said the same feature is built into SuperSU. Problem was it's built into the paid version, which I didn't have (discovered this after it was too late). Installed 4.1.2 OTA. I lost root. My bootloader was updated to 3.41. I also was not able to flash a recovery. Fastboot flash would not work, Wugs toolkit didn't work. Tried several methods. After reading several threads that have been pretty active for the last few days, here's what finally worked for me. Found it in another thread, which I can't find at the moment.
adb reboot bootloader
fastboot flash bootloader bootloader-grouper-3.34.img from the JRO03D factory image
fastboot flash recovery TWRP img
fastboot reboot-bootloader
TWRP recovery started up :laugh:.
flashed SuperSU to re-root, it was sucessful.
updated busybox binaries.
installed OTA rootkeeper, so hopefully this won't happen again.
I'm not really sure I want to try flashing the 3.41 bootloader.
What a pain in the A.
Now it's time to flash faux kernel.
jayyo said:
Here's my experience:
Stock ROM, rooted, custom kernel.
Got the notification for the 4.1.2 OTA update, so I did a nandroid backup in TWRP. Then I flashed back to the stock recovery and boot.img.
I was thinking that I might lose root, based on other's problems. Looked into installing Root Keeper by Voodoo. In the description it said the same feature is built into SuperSU. Problem was it's built into the paid version, which I didn't have (discovered this after it was too late). Installed 4.1.2 OTA. I lost root. My bootloader was updated to 3.41. I also was not able to flash a recovery. Fastboot flash would not work, Wugs toolkit didn't work. Tried several methods. After reading several threads that have been pretty active for the last few days, here's what finally worked for me. Found it in another thread, which I can't find at the moment.
adb reboot bootloader
fastboot flash bootloader bootloader-grouper-3.34.img from the JRO03D factory image
fastboot flash recovery TWRP img
fastboot reboot-bootloader
TWRP recovery started up :laugh:.
flashed SuperSU to re-root, it was sucessful.
updated busybox binaries.
installed OTA rootkeeper, so hopefully this won't happen again.
I'm not really sure I want to try flashing the 3.41 bootloader.
What a pain in the A.
Now it's time to flash faux kernel.
Click to expand...
Click to collapse
So, the bootloader 3.41 is the problem?
Southmad said:
So, the bootloader 3.41 is the problem?
Click to expand...
Click to collapse
For some people, yes. No idea why.
veeman said:
http://www.clockworkmod.com/rommanager
You can download the Touch Recovery on the right side for Google Nexus 7 version. But make sure when you put in
Code:
fastboot flash recovery recovery-clockwork-touch-6.0.1.0-grouper.img
for step 5. instead of what they put.
Click to expand...
Click to collapse
Would that image work ok for Galaxy s3? Or there is no difference at all, just matter the 4.1.2 android version?
Cuz i updated my device throught Kies (cuzz from the device itself it didnt allow, stating that the image has been modifyied :angel: ) and after that even with the persistent mode on Super SU the root is gone
So I upgraded to 4.3 from 4.2.2. I followed this guide (http://forum.xda-developers.com/showthread.php?t=2378413&) except with TWRP recovery. It was going according to the guide but it never asked me if I wanted to keep root or recovery. It rebooted just fine but when I shut down and tried to go back into recovery to flash SU I get an android with a red triangle exclamation mark.
I assume this means that I lost TWRP recovery. I'm relatively new to this, so could someone explain to me how to get a custom recovery back? I assume after I get the recovery back that I can flash SU again and regain root. If it matters, my bootloader is still unlocked.
Thanks
mikey331 said:
So I upgraded to 4.3 from 4.2.2. I followed this guide (http://forum.xda-developers.com/showthread.php?t=2378413&) except with TWRP recovery. It was going according to the guide but it never asked me if I wanted to keep root or recovery. It rebooted just fine but when I shut down and tried to go back into recovery to flash SU I get an android with a red triangle exclamation mark.
I assume this means that I lost TWRP recovery. I'm relatively new to this, so could someone explain to me how to get a custom recovery back? I assume after I get the recovery back that I can flash SU again and regain root. If it matters, my bootloader is still unlocked.
Thanks
Click to expand...
Click to collapse
flash twrp recovery via fastboot
Hi
A while ago i flashed leaked android 4.3 from here:
http://forum.xda-developers.com/showthread.php?t=2368401
and suddenly i realized that i have lost root access. I can't get into recovery (TWRP)
What should I do? Please help!
why do you think that you wouldnt lose root after flashing stock? and you didnt lose your recovery, it got replaced by stock recovery, as always when you flash stock. you need to flash your custom recovery of choice via fastboot, then flash the su binaries via your newly reflashed custom recovery. thats all. a simple search would have found you the answer, because mamy people get stuck there after every single new android version. to prevent this from happening, do some research before flashing anything.
simms22 said:
why do you think that you wouldnt lose root after flashing stock? and you didnt lose your recovery, it got replaced by stock recovery, as always when you flash stock. you need to flash your custom recovery of choice via fastboot, then flash the su binaries via your newly reflashed custom recovery. thats all. a simple search would have found you the answer, because mamy people get stuck there after every single new android version. to prevent this from happening, do some research before flashing anything.
Click to expand...
Click to collapse
TWRP is still there because when small update comes (3.9 MB) is doesn't install. Instead it reboots into TWRP
Just switched on my Moto G 2015 (US Retail, XT1540 2GB) for the first time in a week or two and got an update notification...
April 1 2017 security update, Build Number MPIS24.65-25.1-19 and System Version 24.221.19.osprey_retus_2gb.retus.en.US.retus
Is this news to people, or am I just way behind?
I have the same model, just did check system for updates and the update notification popped up. No notification before checking.
you are just way behind........got this update months back
RijuSarkar said:
you are just way behind........got this update months back
Click to expand...
Click to collapse
But you have something different than a 1540. I believe 1540 was the last to get the January update, while there are other models with 6.01 which the 1540 most likely will never get.
I've never got an update.
Just got mine today, 6/26/17. Also have an XT1540.
So I followed the same instructions here as I did for the last security update to a rooted device. It worked perfectly with the exception of the unlocked boot loader warning. The dark logo I used survived the January security system update, but was lost with this update.
@MrTooPhone
What do you mean by restored data partition I your instructions,I am not getting that.i am on stock not rooted but unlocked bootloader
25vikasp said:
@MrTooPhone
What do you mean by restored data partition I your instructions,I am not getting that.i am on stock not rooted but unlocked bootloader
Click to expand...
Click to collapse
If you are on stock ROM, unrooted, and stock recovery, you should be able to take the OTA upgrade with no issue regardless if your bootloader is locked or not.. I had to restore my unrooted stock ROM prior to accepting the OTA update. Than using TWRP, I restored the data partition from my last saved rooted ROM.
MrTooPhone said:
If you are on stock ROM, unrooted, and stock recovery, you should be able to take the OTA upgrade with no issue regardless if your bootloader is locked or not.. I had to restore my unrooted stock ROM prior to accepting the OTA update. Than using TWRP, I restored the data partition from my last saved rooted ROM.
Click to expand...
Click to collapse
Thanks for reply,i forgot to mention I have twrp installed.in order to update I just restored my non rooted nandroid backup.so currently it is asking me to update so should I proceed and how to take backup for data partition
25vikasp said:
Thanks for reply,i forgot to mention I have twrp installed.in order to update I just restored my non rooted nandroid backup.so currently it is asking me to update so should I proceed and how to take backup for data partition
Click to expand...
Click to collapse
I would not proceed if TWRP is installed. You need the stock recovery installed for the OTA upgrade successfully install. Once stock recovery is installed, you can boot into TWRP and complete all actions as if TWRP was installed. I never installed TWRP.
MrTooPhone said:
I would not proceed if TWRP is installed. You need the stock recovery installed for the OTA upgrade successfully install. Once stock recovery is installed, you can boot into TWRP and complete all actions as if TWRP was installed. I never installed TWRP.
Click to expand...
Click to collapse
Without twrp how u managed to get root access.for installing stock recovery do I have to flash the entire firmware. Above line indicates that our phone can boot into two recoveries correct me if I am wrong
25vikasp said:
Without twrp how u managed to get root access.for installing stock recovery do I have to flash the entire firmware. Above line indicates that our phone can boot into two recoveries correct me if I am wrong
Click to expand...
Click to collapse
That is correct. I still have stock recovery installed, but I use fastboot commands to boot into TWRP recovery.
After connecting the phone to the usb, using Linux, I do the following commands from the same directory where my TWRP img file is located.
Code:
./adb reboot bootloader
sudo ./fastboot boot twrp-osprey-3.1.0-r1.img
This loads TWRP in your phone but does not install it.
From windows I think the commands basically the same without the "./"
25vikasp said:
Without twrp how u managed to get root access.for installing stock recovery do I have to flash the entire firmware. Above line indicates that our phone can boot into two recoveries correct me if I am wrong
Click to expand...
Click to collapse
You can boot TWRP without flashing it to get root.
Hello.
My mobile ver 25.93.14.4 is rooted and twrp is installed. Today I got update for my device which is npjs 25.93.14.8 I downloaded this update and after downloading i click on install button a message appears that phone will restart in 10 seconds after restarting the mobile stuck in recovery mode. I again try to restart but again automatically i log into recovery mode. what should I do to install new update.
Thanks in advance.
abhi212b said:
I think since you are rooted and you tried installing the OTA, the boot.img is replaced by the original one, that breaks the phone if flashed on root. so you can try 2 things:
1. Try flashing the EX kernel again. Flash the Uninstaller 1st and then flash it again and then normal boot from TWRP.. if it loops to TWRP, use point 2 procedure.. if it works...
2. If you are being re-directed to the TWRP. press and hold power + Vol down to go to bootloader and then use normal mode.
Personally, I would flash EX kernel again and then boot...
Hope it helps!
If Nothing helps..Make a Nandroid backup, Boot to bootloader by Power+Vol down. and then flash stock from PC..
u can restore the nandroid backup by Titanium Pro..
Click to expand...
Click to collapse
Try the steps that abhi212b suggested (this was for users that had TWRP installed and took the March OTA when it was available).
As an aside, OTA updates will only install properly on the stock recovery with a stock system and kernel. Thus you'll have to remove root, flash a stock kernel and stock recovery and then you should be able to install the OTA. If you have a custom logo.bin, you'll have to flash the stock logo.bin too.
Thanku so much.
echo92 said:
Try the steps that abhi212b suggested (this was for users that had TWRP installed and took the March OTA when it was available).
As an aside, OTA updates will only install properly on the stock recovery with a stock system and kernel. Thus you'll have to remove root, flash a stock kernel and stock recovery and then you should be able to install the OTA. If you have a custom logo.bin, you'll have to flash the stock logo.bin too.
Click to expand...
Click to collapse
Thank you so much buddy...
solved my problem:good: