Related
This Guide is to Return Back to Stock.
This has NOT been tested Yet So do it on your Own Risk! The Files are STOCK though from LG`s Servers But this Method Should work if you have bricked your device.
How to flash ROM:
1) Download the Rom You Want! Choose your model At the Link Below - The Files are Hosted on my server for fast speeds!
Click Here
2) Download LG mobile support tool and Install it. (It will open up when its done just CLOSE IT OFF)
LG Mobile Support Tool Download
3) Download / Install FlashTool (R&D Test Tool) & Drivers
Download Here
4) Power off your G2, press Volume Up & Down key and then plug in the usb cable (enter to a download mode)
5) Extract FlashTool and run UpTestEX.exe
6) In R&D Test Tool window,
Select Type = 3GQCT (top left hand side)
PhoneMode = DIAG (top right hand side)
Select kdz file = click to select your LG stock rom *.kdz
Click "Normal web upgrade test" (bottom right hand side)
Then another window will pop up, click "Upgrade Start" button
wait a few seconds, another window "Select Country & Language" pop up,
=> Country=Republic of Korea
=> Language=English
you can click ok to proceed
7) All Done and wait for finish!
8) Be Sure that after flashing to perform a reset as for some reason flashing this does not remove what was there before until you reset. By turning off, Holding down power and Vol Down until it comes up on the screen.
If I helped you in anyway feel free to Buy me a Drink or click that THANKS button
I can confirm it works (i've done it twice to recover from unsuccessful CWM attempts).
The best way to get the stock rom would probably be the one explained in this thread http://forum.xda-developers.com/showthread.php?t=1073827 (it ensures you get the latest rom).
Thanks for the post really usefull .
but i can't do a reset.. press vol down and power... appears LG logo and disconnects.. i connect it again but account wasn't reseted...
am i doing sometinhg wrong?
thanks
---------- Post added at 02:56 PM ---------- Previous post was at 02:41 PM ----------
Found some more detailed instructions
Method #1:
Tap your Apps icon.
Go in to your Settings.
Select Backup & reset.
Choose Factory data reset.
Method #2
Make sure your device is fully charged and turned off.
Simultaneously press and hold the power and volume down buttons.
When the LG logo shows up, release the power button only.
Now press and hold the power and volume up button while keeping your hold on the volume down button.
When the factory reset screen appears, release your hold on all buttons.
Press the power button to continue.
Press the power button again to confirm if you’re sure you wish to continue with the reset.
obiwan86300 said:
I can confirm it works (i've done it twice to recover from unsuccessful CWM attempts).
The best way to get the stock rom would probably be the one explained in this thread http://forum.xda-developers.com/showthread.php?t=1073827 (it ensures you get the latest rom).
Click to expand...
Click to collapse
That program NO longer works , Requires an IMEI , and also The files I get come directly from LG servers so they are the latest and I always delete the older firmwares when they does happen. Theres a restore method out there somewhere thats a program but not sure what it was called.
madscout said:
Thanks for the post
Make sure your device is fully charged and turned off.
Simultaneously press and hold the power and volume down buttons.
When the LG logo shows up, release the power button only.
Now press and hold the power and volume up button while keeping your hold on the volume down button.
When the factory reset screen appears, release your hold on all buttons.
Press the power button to continue.
Press the power button again to confirm if you’re sure you wish to continue with the reset.
Click to expand...
Click to collapse
DUDE! Thanks a lot!
You saved my day.
Had my pad in bootloop (don't ask ) and nothing did the trick. Even the complete new install. And nowhere I found info about how to enter recovery/factory reset.
Tried everything on my own, except this stupid combination you posted above
Long story short: Thanks :highfive:
franky9999 said:
DUDE! Thanks a lot!
You saved my day.
Had my pad in bootloop (don't ask ) and nothing did the trick. Even the complete new install. And nowhere I found info about how to enter recovery/factory reset.
Tried everything on my own, except this stupid combination you posted above
Long story short: Thanks :highfive:
Click to expand...
Click to collapse
Glad it helped
In country can we insert ou own country or is it mandatory that can be south korea ... i ask because my tablet is the european version V50010a
This is excellent work, thanks
Do you have the files for the US Version or is it same as UK version?
Worked for me without any problems, many Thanks
Getting this error after clicking the Upgrade Start button:
Code:
Please install CSMG B2C Client TOOL
Select Tool -> B2C Client Setup menu
I've run the B2CAppSetup.exe and had the program pop up (incidentally, there is a way to restore through that - connect the tablet in download mode, then go to Options -> Upgrade Recovery), then closed it, and followed all the other instructions exactly.
Fixed
Hi Guys
can someone please help me with my G Pad. I was trying to flash cyanogen but something went wrong. I´ve rooted it with Kingo succesfully, then I tried to flash latest TWRP 2.6.3.0 and that is where I failed. I´ve installed it from terminal emulator but some errors occured. So I´ve tried doing factory reset, GPad rebooted and now it won´t start. I´m in a bootloop: LG Logo with classic secure booting error and then it loads TWRP, but it only runs a script (see photo), and then reboots.
So now works only adb (not fastboot) and download mode. I can not reinstal recovery via adb and LG updater is allways stuck at 4%. I´ve tried V50010A_00.kdz and V50010E_00.kdz multiple (many) times on 2 different laptops but it allways ends in
********* 2Chip Model.dll input Parameter End*************
09:26:54 : wParam : 100, lParam = 72
09:26:54 : MODEL DLL Event : (100, 72)
09:26:54 : Step : TYPE_WPARAM_UPGRADE_ERROR
09:26:54 : CleanModelDll() : Free Model.dll
09:26:54 : _DetachDLL Call
09:26:59 : _DetachDLL Call End
09:26:59 : Page_Error şÎşĐŔÔ´Ď´Ů
09:26:59 : ż©±â´Â Retry şÎşĐŔÔ´Ď´Ů
Hard reset only loads TWRP and bootloop continues.
So please, I would be very grateful for any suggestions.
If you actually read the TWRP thread you would have known that 2.6.3.2 is the latest, and that 2.6.3.0 doesn't work with CM/AOSP ROMs.
You need to follow the returning to stock guide.
Well I downloaded TWRP for my LG G Pad from TeamWin site and the only recovery was openrecovery-twrp-2.6.3.0-awifi.img. But I could´ve dig in it a little, usually I´m very careful and it´s my own fault.
But can someone give me advice what to do with my "back to stock" guide? I´ve already followed this guide X times, but I´m still stuck at 4%.
EDIT:
After 3 long days I´ve managed to overcome my 4% stuck problem. After hours of reading tens of threads I´ve tried almost everything: changing COM ports, reinstalling drivers, reinstalling LG mobile support tools, manual flash with LG , PC suite, LGNPST, installing new windows 7...
After a while I understood that the guide for back to stock recovery is OK, problem was in the extraction of the KDZ file. My Windows 7 couldn´t for some reason cooperate well with any of LG flashing programmes. So then I installed Windows XP. Nothing to lose.
It worked flawlessly! KDZ extraction process was taking significantly longer and then flashing process went trough magical 4% stop and now my GPad is like new.
So the solution for me was to install Windows XP and flash from it.
I hope it will help people with this flash stuck at ... problem.
mysiak_d said:
Well I downloaded TWRP for my LG G Pad from TeamWin site and the only recovery was openrecovery-twrp-2.6.3.0-awifi.img. But I could´ve dig in it a little, usually I´m very careful and it´s my own fault.
But can someone give me advice what to do with my "back to stock" guide? I´ve already followed this guide X times, but I´m still stuck at 4%.
Edit: In fact I´ve never even got to install cyanogen. I was still on stock when tried to factory reset.
Click to expand...
Click to collapse
Download TWRP in flashable zip and flash the newest twrp. Also download ROM and flash it after twrp. If twrp just runs script and then restarts then you have to do a return to stock. TWRP did the same to me too and had to do a return to stock.
When you do a return to stock make sure you click where it says web upgrade. That opens a new window and that's where you start the upgrade. I got confused there...
Sent from my LG-D800 using XDA Premium 4 mobile app
AndroidUser00110001 said:
Download TWRP in flashable zip and flash the newest twrp. Also download ROM and flash it after twrp. If twrp just runs script and then restarts then you have to do a return to stock. TWRP did the same to me too and had to do a return to stock.
When you do a return to stock make sure you click where it says web upgrade. That opens a new window and that's where you start the upgrade. I got confused there...
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you for suggestion.
So your advice is to flash TWRP and ROM, then do return to stock?
I would have already flashed new TWRP but the fastboot is not working for me (don´t know why, just says waiting for device) and until now i haven´t found a way to flash recovery via adb from recovery. Or to enter full TWRP.
mysiak_d said:
Thank you for suggestion.
So your advice is to flash TWRP and ROM, then do return to stock?
I would have already flashed new TWRP but the fastboot is not working for me (don´t know why, just says waiting for device) and until now i haven´t found a way to flash recovery via adb from recovery. Or to enter full TWRP.
Click to expand...
Click to collapse
Sounds like return to stock is your best bet then.
Sent from my LG-D800 using XDA Premium 4 mobile app
hi, is there a rom stock flashable with TWRP?
cabron1980 said:
hi, is there a rom stock flashable with TWRP?
Click to expand...
Click to collapse
You can try to flash the GPE ROM port and see if that works. Would be helpful in figuring out what's wrong if you do not have working WiFi and Bluetooth.
Sent from my LG-D800 using XDA Premium 4 mobile app
Hello,
I am very new to rooting etc. I rooted my phone a few days ago, unlocked bootloader and tried to flash cm11.0 with rom manager (cwmg) following this link:
http://forum.xda-developers.com/showthread.php?t=2521239
Unfortunately I didn´t understand the instructions well, so after wiping caches, instead of doing a full format I did a user data etc format (which i now think was a factory reset). Tried flashing, didn´t succeed.
Anyway, when I try to switch it on I only get the lg logo and then the batery charging thingy When I try to go to recovery mode with volume up power and menu button, my phone goes on a loop of lg and cyanomod logos untill infinity ( Have to take off the battery). Tried to use heimdall (as i have a mac) to flash kdz back to it, but phone was not recognized. On my pc tried the same, but again phone not seen. I can see it on my computer as an unrecognized external usb but cannot explore. Any ideas on what to do??
thanks in advance
franky.frangi said:
Hello,
I am very new to rooting etc. I rooted my phone a few days ago, unlocked bootloader and tried to flash cm11.0 with rom manager (cwmg) following this link:
http://forum.xda-developers.com/showthread.php?t=2521239
Unfortunately I didn´t understand the instructions well, so after wiping caches, instead of doing a full format I did a user data etc format (which i now think was a factory reset). Tried flashing, didn´t succeed.
Anyway, when I try to switch it on I only get the lg logo and then the batery charging thingy When I try to go to recovery mode with volume up power and menu button, my phone goes on a loop of lg and cyanomod logos untill infinity ( Have to take off the battery). Tried to use heimdall (as i have a mac) to flash kdz back to it, but phone was not recognized. On my pc tried the same, but again phone not seen. I can see it on my computer as an unrecognized external usb but cannot explore. Any ideas on what to do??
thanks in advance
Click to expand...
Click to collapse
power off your device.
long press
1) "vol -"
2) home button
3) power button
for some second
are you able to enter in recovery?
lferlito said:
power off your device.
long press
1) "vol -"
2) home button
3) power button
for some second
are you able to enter in recovery?
Click to expand...
Click to collapse
No, it goes into logos loop.
franky.frangi said:
No, it goes into logos loop.
Click to expand...
Click to collapse
i don't know, man
but for the future, before installing a custom rom
remember to install a recovery
it's very important
hope someone better than me will help you
:fingers-crossed:
lferlito said:
i don't know, man
but for the future, before installing a custom rom
remember to install a recovery
it's very important
hope someone better than me will help you
:fingers-crossed:
Click to expand...
Click to collapse
But I did, throught clockworkmod (first thing I did) ....and also did a nandroid backup...just don´t know how to access them...
franky.frangi said:
But I did, throught clockworkmod (first thing I did) ....and also did a nandroid backup...just don´t know how to access them...
Click to expand...
Click to collapse
on my L5, i long press those 3 buttons until LG logo boot appears..
i wait some second and it appears the CWM reco
i don't know if there are other ways to enter in recovery mode..
yeah me neither.mine used to do the same before the flashing.thanks thought.lets see if someone has another idea...
franky.frangi said:
yeah me neither.mine used to do the same before the flashing.thanks thought.lets see if someone has another idea...
Click to expand...
Click to collapse
As soon as you plug your USB into your phone, hold down the volume up (+) button and the power button and release them after holding them down for about 2 to 3 seconds. Then, install the USB driver for your phone with the LG Mobile Support Tool. Secondly, download and install the LG PC Suite program and last but not least, download the KDZ program. Install the correct firmware for your phone and make sure you select 'EMERGENCY' from the list on the top right of the KDZ program. Select your downloaded firmware file and start the program. If everything worked out, the program should crash after it's done and your phone should reboot. Disconnect your phone from the computer if it doesn't reboot and try to boot it up again.
You can find all of these programs along with tutorials on how they work by searching on either XDA or Google.
did forcing recovery/download work ?
TahaX said:
As soon as you plug your USB into your phone, hold down the volume up (+) button and the power button and release them after holding them down for about 2 to 3 seconds. Then, install the USB driver for your phone with the LG Mobile Support Tool. Secondly, download and install the LG PC Suite program and last but not least, download the KDZ program. Install the correct firmware for your phone and make sure you select 'EMERGENCY' from the list on the top right of the KDZ program. Select your downloaded firmware file and start the program. If everything worked out, the program should crash after it's done and your phone should reboot. Disconnect your phone from the computer if it doesn't reboot and try to boot it up again.
You can find all of these programs along with tutorials on how they work by searching on either XDA or Google.
Click to expand...
Click to collapse
the phone off usb in and buttons did it work ?
Actually didn´t work,I have drivers already, LG PC Suite program , and KDZ. Problem is my phone is not detected by pc, so kdz unzips and then says : phone not detected, with or without battery...doesn´t go into recovery mode with buttons, just lg and cyanomod logos...
I don`t know if this can b fixed.....How can you flash anything if it´s not detected....
I´ll give it a try again tomorrow, without trying to enter recovery mode....but tried lots of buttons combinations and wasn´t working
Press these buttons
volume +
,volume -
home button
together with the power button
release all buttons except power button when you get a vibration
release the power button immediately after the lg logo has appered
this should let you get in the recovery menu
FULL STEP BY STEP GUIDE
found http://forum.xda-developers.com/showthread.php?t=2486512
IGGYVIP said:
Press these buttons
volume +
,volume -
home button
together with the power button
release all buttons except power button when you get a vibration
release the power button immediately after the lg logo has appered
this should let you get in the recovery menu
FULL STEP BY STEP GUIDE
found http://forum.xda-developers.com/showthread.php?t=2486512
Click to expand...
Click to collapse
Finally!! This worked....I can get in the recovery menu!!!
Before I do anything I´ll really think about what rom I want to use )
Thanks lot everyone...hope it gives me no more issues.
franky.frangi said:
Finally!! This worked....I can get in the recovery menu!!!
Before I do anything I´ll really think about what rom I want to use )
Thanks lot everyone...hope it gives me no more issues.
Click to expand...
Click to collapse
happy flashing
I just updated my lg g2 recently, but i had an problem just after entered the PIN sim card! A blank page showing with a text and textbox saying "Enter your PIN/PASSWORD to decrypt"! I'm sure that before update i didn't enter any password.
And when i search i find that i can go to Factory Reset, But i follow the steps to go Factory Reset. I'm getting just logo LG and then my phone restart again,
if you had any idea how can i fix this problem, it we'll be great!
Thanks XDA Members.
[FIX] : There is no other solution, You should just Flash by using Factory Reset, And in my case i can't access to factory reset, I used the LGFlashTool method.
Thanks for every one who helped me.
Pretty sure you'll have to kdz flash.
What method are you applying to go to factory reset?
Proper method:
Power the device down.
Press and hold the Volume down button and the Power button.
When the LG logo is displayed release the Power button only then immediately press and hold the Power button again.
Release both buttons when the Factory hard reset screen appears.
Sent from my LG-D801 using Tapatalk
AnteusFogg said:
What method are you applying to go to factory reset?
Proper method:
Power the device down.
Press and hold the Volume down button and the Power button.
When the LG logo is displayed release the Power button only then immediately press and hold the Power button again.
Release both buttons when the Factory hard reset screen appears.
Sent from my LG-D801 using Tapatalk
Click to expand...
Click to collapse
Yep, That's my method too!
Swizzle82 said:
Pretty sure you'll have to kdz flash.
Click to expand...
Click to collapse
Any help how can i flash it! remember that i can't open Factory Reset! And if you have any tuto please mp me. Thanks for your help in advance.
1)Find and Download the corresponding kdz for your model (there's a thread somewhere on xda that has all the kdz files for almost every model) EDIT: I found it, here's the link to the files
http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/
2) Download LG mobile support tool and Install it. (It will open up when its done just CLOSE IT OFF)
3) Download / Install FlashTool (R&D Test Tool)
http://www.mediafire.com/?zrt9jvalv83wn62
Power off your phone, press Volume Up & and then plug in the usb cable (enter to a download mode/upgrade mode)
5) Extract FlashTool and run UpTestEX.exe
6) In R&D Test Tool window,
Select Type = 3GQCT (top left hand side)
PhoneMode = DIAG (top right hand side)
Select kdz file = click to select your LG stock rom *.kdz
Click "Normal web upgrade test" (bottom right hand side)
Then another window will pop up, click "Upgrade Start" button
wait a few seconds, another window "Select Country & Language" pop up,
=> Country=Republic of Korea
=> Language=English
you can click ok to proceed
7) All Done and wait for finish!
VIDEO tutorial: (in the video I'm using it on my L9 but I've used it on my G2 the same way)
https://www.youtube.com/watch?v=8muaV-mOrec&feature=youtube_gdata_player
Swizzle82 said:
1)Find and Download the corresponding kdz for your model (there's a thread somewhere on xda that has all the kdz files for almost every model) EDIT: I found it, here's the link to the files
http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/
2) Download LG mobile support tool and Install it. (It will open up when its done just CLOSE IT OFF)
3) Download / Install FlashTool (R&D Test Tool)
http://www.mediafire.com/?zrt9jvalv83wn62
Power off your phone, press Volume Up & and then plug in the usb cable (enter to a download mode/upgrade mode)
5) Extract FlashTool and run UpTestEX.exe
6) In R&D Test Tool window,
Select Type = 3GQCT (top left hand side)
PhoneMode = DIAG (top right hand side)
Select kdz file = click to select your LG stock rom *.kdz
Click "Normal web upgrade test" (bottom right hand side)
Then another window will pop up, click "Upgrade Start" button
wait a few seconds, another window "Select Country & Language" pop up,
=> Country=Republic of Korea
=> Language=English
you can click ok to proceed
7) All Done and wait for finish!
VIDEO tutorial: (in the video I'm using it on my L9 but I've used it on my G2 the same way)
https://www.youtube.com/watch?v=8muaV-mOrec&feature=youtube_gdata_player
Click to expand...
Click to collapse
Thank you for the step by step process, where can I get the video for visuals?
buenarc said:
Thank you for the step by step process, where can I get the video for visuals?
Click to expand...
Click to collapse
Click on the you tube link in my post
UPDATE !! Thanks for your help, My probleme was resolved by using LGFlashTool method, I'm very thankful to you men. keep spread the world.
Fadouchi said:
UPDATE !! Thanks for your help, My probleme was resolved by using LGFlashTool method, I'm very thankful to you men. keep spread the world.
Click to expand...
Click to collapse
Good to hear!
Support inquiry
Hi Swizzle82
I would like to ask for the same ...
LG G2 32 GB from HK , today made update by LG PC Suite to software ver D80220B, after restart I stocked with PIN/ Password to decrypt inquiry ...
What to do ? I have followed your suggestions but it doesn't work ..
Frankly speaking I have only tried with D80220A ver , to downgrade the phone
But after switching to LG Mobile , it still downloading the newest version again - the effect after restart was the same , inquiry for PIN/ Password .
I have noticed that after switching language and location from Poland to Korean Republic - it showed in LG mobile support tool , two options ... one of them was to get your PIN - but unfortunately I need to register and www was in Korean ..
Any ideas , hints - I will appreciate your kind support
BR
Art
Same problem here.
I'm on the lg g2 D802.
Initially I did it using the LG Flash tool method, however, I did not get the region and language pop up. So I proceed to flash it from the lg support tool.
When I had done this previously (at around the time of the official kitkat release) I had gotten that pop up and all had gone well.
But this time perhaps because of the me using the lg support tools directly, it is now asking for password/pin to decrypt and the hard reset key combinations don't work.
Could this be because I'm currently using windows 8 and I was earlier on Windows 7?
Thanks in Advance
Problem Solved (Sort of)
Earlier when I was using the Flash.Tool.1.0.54, it wouldn't ask for region and language in the pop-up. It would just open the LG Mobile Support Tool and then I manually selected the Start Upgrade button to flash the phone. The problem with this was that on boot it would ask for pin/password. I couldn't even boot into the stock recovery for some reason.
Then I used the LG Flash tool 2014: http://forum.xda-developers.com/showthread.php?t=2797190
There was a region and language pop up and it proceeded to install the firmware.
But on boot, it still asked for the pin/password. So I tried to boot into and it worked this time! Pressed the power button 3 times and it wiped my phone.
On reboot, the phone worked perfectly without asking for the pin/password. But, now it was reading my internal storage as only 16GB. Thankfully there is a solution to this over here: http://forum.xda-developers.com/showthread.php?t=2470207
It worked perfectly for me.
Well, I'm using a L50 d227, I've done everything from Vol down + power >> factory reset >> erase user data to LG flash tool, downloaded kdz for my phone, flashed it sucessfully and when it boots, it asks me for a pin to decrypt.... HELP!
Hi, I recently (like 5 minutes ago) rooted my lg g2 ls980 from sprint and it was fine. it wasnt until i tried to flash a cyanogenmod nightly, the latest one for cm11 on my phone and now its stuck in a boot loop. Ive tried to boot it into recovery but it wont work when i press the buttons (home and vol. down). Im freaking out, and ill admit it im just an ameture and didnt really know what I was doing, but I just got this phone as a replacement for my stolen phone and my parents will kill me if we have to pay a fortune for sprint to fix it if they even can. im using the latest version of twrp I think for the ls980 but it wont let me boot into it. help please as soon as possible. thank you!! Hopefully people still watch this forum I know its a little dated
you flashed over wrong radio you needed this zv8 modem from this thread http://forum.xda-developers.com/showthread.php?t=2451426 , if you can access recovery vol down + power button than flash ls980 zv8 radio and it will boot, if not than just go back to stock, see steps below.
download firmwarehttp://storagecow.eu/Xda/LG G2/Stock/Sprint/LS980ZVA_01.zip
and dllhttp://storagecow.eu/Xda/LG G2/Stock/Sprint/LGLS980_20130904_LGFLASHv151.dll
and divers http://oceanhost.eu/ed0bnrnghgef/LGUnitedMobileDriver_S51MAN312AP22_ML_WHQL_Ver_3.12.3.exe.htm
and flashtool http://oceanhost.eu/nskpvk76ezvp/Setup_LGFlashTool_1.8.1.1023.exe.htm
and megalock.dll http://oceanhost.eu/o9n2mef5f2no/MegaLock.dll.htm
Install:
1. Install the LG drivers downloaded above.
2. Install LGFlashTools v1.8 (but don't run it)
3. Extract the TOT file from the ZIP
When LG Flash Tool is installed, do not launch it.
7) Copy MegaLock.dll to C:\LG\LGFlashTool, This is a hidden folder so enable "hidden folders". Replace the old MegaLock.dll file if you have already installed LG Flash Tool on your computer.
8) When the firmware is downloaded, boot your LG G2 into Download Mode. To do this, press and hold the Volume Up key and then plug the USB cable.
9) Launch LG Flash Tool.
You might see a window with Korean language, just click on OK.
Check the Select Manual Mode on the top.
10) MAKE SURE UNDER, DEVICE MANAGER, YOUR PORT IS SET TO COM 41 FOR YOUR DEVICE.
11) Click the DLL box and choose the dll file from above for you phone model.
12) Click the S/W box and select the firmware file with .tot extension.(the 2.04 gb file from above)
13) Now click the Yellow arrow button on the top left of the main window.
The firmware installation will be triggered.
Ignore if you see any temporary error and just wait patiently till it is finished.
Do not close the Flash Tool window.
14) Press and hold power button until phone turns off, leaving usb cable connected to device AND computer ,immediately hold volume up button until phone boots it into Download Mode.
Your LG G2 will restart showing firmware installation progress in percent (%).
When all is done, reboot your phone and enjoy!
Credit [email protected] for making a cleaner guide for the TOT Method
Hi, i think i bricked my lg g2 d802. Long story short, the phone won't boot into recovery (stock, not custom recovery) or download mode. Even if i enter download mode, the phone would get stuck on the download mode with dots below it or something, basically it won't actually boot into download mode. The phone is stuck on the lg logo with the multicolor led flashing. All button combinations are working. Please please please do help me I'm really desperate to fix it since the last 3 days. Thanks.
farhanshaikh671 said:
Hi, i think i bricked my lg g2 d802. Long story short, the phone won't boot into recovery (stock, not custom recovery) or download mode. Even if i enter download mode, the phone would get stuck on the download mode with dots below it or something, basically it won't actually boot into download mode. The phone is stuck on the lg logo with the multicolor led flashing. All button combinations are working. Please please please do help me I'm really desperate to fix it since the last 3 days. Thanks.
Click to expand...
Click to collapse
Hi.
Download mode is when you press and hold the volume up key and plug the usb into a computer. Youll get a black screen with a box that says download. Nothing else will happen until you get the correct software.
If you can get it into the download mode, you will need the LG Flash tool, the LG drivers, the stock rom for your phone and about 15 minutes of your time.
LG Flash tool and LG Drivers from here ----> http://lgflashtool.com/
Stock Rom from here -----> http://storagecow.eu/index.php?dir=Xda%2FLG+G2%2FStock%2F
How to:
Install LG Drivers.
Extract the stock rom KDZ from zip file.
Run the flash tool and where it says "select KDZ file", browse to where you unzipped the stock rom you downloaded and select the file.
Hold down the volume up button on your phone and plug it into your computer by USB. Your phone will have a black screen and a blue box that says "Download". If it doesn't, you're not in download mode. Try again.
Once in download mode, Click "CSE Flash" in the flash tool
In the next window click "Start"
Now give it around 10 minutes to flash. You'll see the progress on the phone screen. Once done the phone will reboot and you'll be up and running again.
Hope this helps.
blueplasticsoulman said:
Hi.
Download mode is when you press and hold the volume up key and plug the usb into a computer. Youll get a black screen with a box that says download. Nothing else will happen until you get the correct software.
If you can get it into the download mode, you will need the LG Flash tool, the LG drivers, the stock rom for your phone and about 15 minutes of your time.
LG Flash tool and LG Drivers from here ----> http://lgflashtool.com/
Stock Rom from here -----> http://storagecow.eu/index.php?dir=Xda%2FLG+G2%2FStock%2F
How to:
Install LG Drivers.
Extract the stock rom KDZ from zip file.
Run the flash tool and where it says "select KDZ file", browse to where you unzipped the stock rom you downloaded and select the file.
Hold down the volume up button on your phone and plug it into your computer by USB. Your phone will have a black screen and a blue box that says "Download". If it doesn't, you're not in download mode. Try again.
Once in download mode, Click "CSE Flash" in the flash tool
In the next window click "Start"
Now give it around 10 minutes to flash. You'll see the progress on the phone screen. Once done the phone will reboot and you'll be up and running again.
Hope this helps.
Click to expand...
Click to collapse
Hi, thanks for your reply. But i fixed it using srktool method by shorting the capacitors.
As i said , i could not boot into download mode. Lg flash tool works only when the phone can boot into download mode afaik. Luckily, i was able to boot into qhsusb_bulk mode and fix the phone using srktool. Now i can boot into download mode. Anyways, i fixed it. Thanks for your help
help!
farhanshaikh671 said:
Hi, thanks for your reply. But i fixed it using srktool method by shorting the capacitors.
As i said , i could not boot into download mode. Lg flash tool works only when the phone can boot into download mode afaik. Luckily, i was able to boot into qhsusb_bulk mode and fix the phone using srktool. Now i can boot into download mode. Anyways, i fixed it. Thanks for your help
Click to expand...
Click to collapse
I'm very late but how did you short the capacitors??
annonmouse said:
I'm very late but how did you short the capacitors??
Click to expand...
Click to collapse
https://youtu.be/uoWUPnat5GQ
Make sure you find the proper ones. You need to remove the metal shield thing before shorting. It requires a lot of patience to short those caps properly. Once do you do it properly, the screen backlight should light up. Good luck