I am back to the forums finally after 8 months! The last time I was here I updated to MJ9 and rooted it through odin and that is the latest and greatest at the time. I remember SS was not even use able yet!
So a quick question on the process I should take:
1.I am on MJ9, can I install SS 3.65 then install SS based ROMS? Or do I have to downgrade to MJE (which I dont think I do)?
2.If I wanted to flash a 4.4 ROM I should be able to just flash it then update the radios correct?
Any help would be appreciated. It just been so long and being on these forums for year stuff and methods change so fast it can be hard to catch back up.
monkey10120 said:
I am back to the forums finally after 8 months! The last time I was here I updated to MJ9 and rooted it through odin and that is the latest and greatest at the time. I remember SS was not even use able yet!
So a quick question on the process I should take:
1.I am on MJ9, can I install SS 3.65 then install SS based ROMS? Or do I have to downgrade to MJE (which I dont think I do)?
2.If I wanted to flash a 4.4 ROM I should be able to just flash it then update the radios correct?
Any help would be appreciated. It just been so long and being on these forums for year stuff and methods change so fast it can be hard to catch back up.
Click to expand...
Click to collapse
1. Yes you can install SS 3.65 then install any 4.3 ROM.
2. Yes, you would flash the radios with Odin. You would also need to install the newest SS for 4.4.2 since 3.65 won't work on it.
airmaxx23 said:
1. Yes you can install SS 3.65 then install any 4.3 ROM.
2. Yes, you would flash the radios with Odin. You would also need to install the newest SS for 4.4.2 since 3.65 won't work on it.
Click to expand...
Click to collapse
Thanks for the quick response. SO at least I am following everything correctly. On 4.3 I can update to 3.75 and SS should still work right? Just making sure because it sounds like you can flash 4.4 roms with 3.75 but not 4.3
monkey10120 said:
Thanks for the quick response. SO at least I am following everything correctly. On 4.3 I can update to 3.75 and SS should still work right? Just making sure because it sounds like you can flash 4.4 roms with 3.75 but not 4.3
Click to expand...
Click to collapse
You need to use 3.65 while you're on 4.3, even flashing the 4.4.2 ROM for the first time. Once you've installed the 4.4.2 ROM and radios then you install 3.75.
airmaxx23 said:
You need to use 3.65 while you're on 4.3, even flashing the 4.4.2 ROM for the first time. Once you've installed the 4.4.2 ROM and radios then you install 3.75.
Click to expand...
Click to collapse
Ahh got it! Thank you sir
When rebooting and having it say "SafeStrap Disabled" is fine until I use a different slot then it should say enabled?
Related
I've search but maybe someone can point me in the right direction. I am wondering which Rom would be compatible with my phone. What exactly am I looking for in the description to know if it will work. My phone is rooted and has Safestrap installed. Sorry if this has been discussed already.
Android Version
4.3
Baseband Version
I337UCUEMJ9
Build
JSS15J.I337UCUEMJ9
vandeec5 said:
I've search but maybe someone can point me in the right direction. I am wondering which Rom would be compatible with my phone. What exactly am I looking for in the description to know if it will work. My phone is rooted and has Safestrap installed. Sorry if this has been discussed already.
Android Version
4.3
Baseband Version
I337UCUEMJ9
Build
JSS15J.I337UCUEMJ9
Click to expand...
Click to collapse
You need to update to MK2 4.3 first.
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
[email protected] said:
You need to update to MK2 4.3 first.
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
Click to expand...
Click to collapse
Thanks!! I searched all morning, is there a guide available? Im sure I have to update through Odin?
vandeec5 said:
Thanks!! I searched all morning, is there a guide available? Im sure I have to update through Odin?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=48927617
Download MJ9>MK2 zip, follow instructions in the second post.
If you want to keep root and just save a second in not having to root again, use the SuperSU survival mode.
DeadlySin9 said:
http://forum.xda-developers.com/showthread.php?p=48927617
Download MJ9>MK2 zip, follow instructions in the second post.
If you want to keep root and just save a second in not having to root again, use the SuperSU survival mode.
Click to expand...
Click to collapse
Awesome! I'm rooted with MK2. So maybe you can help me with one more.
I am trying to install Cyanogen so I did the following
From Recovery
Boot Options
Rom-Slot-1 Selected
Wipe
Install Cyanogen
When I reboot, I get nothing..
I am installing the latest nightly of Cyanogen.
From my understanding that is an aosp rom and safe strap does not support those kind of roms yet. Safe strap for 4.3 is fairly new and there is not many roms compatible yet. Pol have been having different results with roms
vandeec5 said:
Awesome! I'm rooted with MK2. So maybe you can help me with one more.
I am trying to install Cyanogen so I did the following
From Recovery
Boot Options
Rom-Slot-1 Selected
Wipe
Install Cyanogen
When I reboot, I get nothing..
I am installing the latest nightly of Cyanogen.
Click to expand...
Click to collapse
Cyanogen and other AOSP ROM's do not work. Only some 4.3 TW ROM's are working at this point.
DeadlySin9 said:
Cyanogen and other AOSP ROM's do not work. Only some 4.3 TW ROM's are working at this point.
Click to expand...
Click to collapse
Awesome thanks for the information
DVSS-EDITION-v1.3.8-ML6
vandeec5 said:
Awesome! I'm rooted with MK2. So maybe you can help me with one more.
I am trying to install Cyanogen so I did the following
From Recovery
Boot Options
Rom-Slot-1 Selected
Wipe
Install Cyanogen
When I reboot, I get nothing..
I am installing the latest nightly of Cyanogen.
Click to expand...
Click to collapse
Deadly Venom SS Edition is out for MK2 with SS v3.71 users ....Link and guide at Post #4 DVSS_EDITION_ML6 ..... ShOstock_v3.0 also work..... Darthstalker X ....and HyperDrive RL 12 also worked.....Goodluck.....:good: ....:good:
Swyped from MK2 Deadly Venom SS
Vision X also works....
TheAxman said:
Vision X also works....
Click to expand...
Click to collapse
Is it safestrap compatible mk2 4.3?
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
TheAxman said:
Vision X also works....
Click to expand...
Click to collapse
Another rom added to the MK2 SS compatible list. ...... awesome. ... Can't wait to try Venomous X bro. .... collaboration of two great rom. ....
Swyped from MK2 Deadly Venom SS
Hi, guys
I want to flash danvdh google edition 4.4.2 ROM on my ATT g4 (MF3) with safe strap.
After I create rom-slot1, wipe all the data and install from sd card with the rom zip file I put there already, looks like it start flash, but got "success" in less than 1 min. I flash loki-doki after that (because I was told it's necessary for my phone). Then I reboot, adter safe sreap screen, click continue, black screen with some viabration. nothing happened.
Actually I check the md5 of the rom I download, it's correct. not sure why flash got a "success" in 1 min, suppose should be long.
Anyone can give some suggestion? REally appreciate it.
You need to do more reading. Safestrap only works with touchwiz ROMs, and only other 4.2.2 ROMs since you're on MF3.
Sent from Black<3's I337 running Hyperdrive
DeadlySin9 said:
You need to do more reading. Safestrap only works with touchwiz ROMs, and only other 4.2.2 ROMs since you're on MF3.
Sent from Black<3's I337 running Hyperdrive
Click to expand...
Click to collapse
Thanks for the reply. But I was told I should use safe strap on another my post when I asked how to flash "danvdh google edition 4.4.2 ROM" with MF3.
Do you mean MF3 can not be flashed to kitkat now?
Sorry for those questions, I searched and found a post with same question but no people answer.
Thanks ain advance!
roy316 said:
Thanks for the reply. But I was told I should use safe strap on another my post when I asked how to flash "danvdh google edition 4.4.2 ROM" with MF3.
Do you mean MF3 can not be flashed to kitkat now?
Sorry for those questions, I searched and found a post with same question but no people answer.
Thanks ain advance!
Click to expand...
Click to collapse
As i said, only Touchwiz and other 4.2.2 if you're on MF3. So no kitkat now.
DeadlySin9 said:
As i said, only Touchwiz and other 4.2.2 if you're on MF3. So no kitkat now.
Click to expand...
Click to collapse
Thanks for the reply.
Sad~~
DeadlySin9 said:
As i said, only Touchwiz and other 4.2.2 if you're on MF3. So no kitkat now.
Click to expand...
Click to collapse
Is there any methods now to upgrade AT&TMF3 from 4.2.2 to 4.4?
Thanks!
roy316 said:
Is there any methods now to upgrade AT&TMF3 from 4.2.2 to 4.4?
Thanks!
Click to expand...
Click to collapse
There is the 4.4 leak, but no root of Safestrap for it yet. You'll have to wait for either of those.
roy316 said:
Thanks for the reply. But I was told I should use safe strap on another my post when I asked how to flash "danvdh google edition 4.4.2 ROM" with MF3.
Do you mean MF3 can not be flashed to kitkat now?
Sorry for those questions, I searched and found a post with same question but no people answer.
Thanks ain advance!
Click to expand...
Click to collapse
Im on the same boat, wish I could danvdh on my phone. Im rocking a diff Google Play rom and its pretty solid. Its def a 4.2.2 though but solid on battery none the less
DeadlySin9 said:
There is the 4.4 leak, but no root of Safestrap for it yet. You'll have to wait for either of those.
Click to expand...
Click to collapse
Thanks for the reply.
Keep waiting!
DeadlySin9 said:
There is the 4.4 leak, but no root of Safestrap for it yet. You'll have to wait for either of those.
Click to expand...
Click to collapse
Any news now?
Thanks!!!
roy316 said:
Any news now?
Thanks!!!
Click to expand...
Click to collapse
If you want to flash a 4.4 ROM you could update to 4.3 then root and install safestrap. Safestrap still doesn't work with ROMs that aren't Touchwiz based. If you need the 4.3 MK2 tar, you can download it here http://www.mediafire.com/download/ktkoogwz562p64k/2400258.zip
Sigatorade said:
If you want to flash a 4.4 ROM you could update to 4.3 then root and install safestrap. Safestrap still doesn't work with ROMs that aren't Touchwiz based. If you need the 4.3 MK2 tar, you can download it here http://www.mediafire.com/download/ktkoogwz562p64k/2400258.zip
Click to expand...
Click to collapse
Thank you for the reply.But I am not quite understood.
Do u mean I can do 4.2 -> 4.3 (root and install safestrap) -> 4.4?
I am now on MF3 version (ATT), 4.3 MK2 is work?
roy316 said:
Thank you for the reply.But I am not quite understood.
Do u mean I can do 4.2 -> 4.3 (root and install safestrap) -> 4.4?
I am now on MF3 version (ATT), 4.3 MK2 is work?
Click to expand...
Click to collapse
If you want to flash a 4.4 ROM you could go 4.3,root, install safestrap,4.4 ROM. The compatible 4.4 ROMS are here: http://forum.xda-developers.com/showthread.php?p=51130834
I have a question before I up date my verizon galaxy note 3 to kitkat ok we can only use safestrap v3.72 on kitkat and you do note have any rom slots that work so are you just flashing over your stock rom every time you want to flash a new rom like jellybean or whatever or am I miss understanding
shogun3340 said:
I have a question before I up date my verizon galaxy note 3 to kitkat ok we can only use safestrap v3.72 on kitkat and you do note have any rom slots that work so are you just flashing over your stock rom every time you want to flash a new rom like jellybean or whatever or am I miss understanding
Click to expand...
Click to collapse
yes, you flash into the stock slot using safestrap 3.72 following a full wipe. I suggest making a backup first. You can only flash kitkat roms while on 3.72 if you want to go back to JB, it is my understanding you need to odin back.
verizion galaxy note 3 safestrap 4.4.2 rom
dassh said:
yes, you flash into the stock slot using safestrap 3.72 following a full wipe. I suggest making a backup first. You can only flash kitkat roms while on 3.72 if you want to go back to JB, it is my understanding you need to odin back.
Click to expand...
Click to collapse
On last thing I forgot to ask after I flash say baja 4.4.2 rom on the stock slot could I can't use any rom slots but could I click the restore button in safestrap and restore a rom to the stock slot that I wiped
shogun3340 said:
On last thing I forgot to ask after I flash say baja 4.4.2 rom on the stock slot could I can't use any rom slots but could I click the restore button in safestrap and restore a rom to the stock slot that I wiped
Click to expand...
Click to collapse
Correct, you cannot use any rom slot besides stock right now and yes you can restore a back up to your stock slot.
Sent from my Nexus 10 using Tapatalk
updated to kitkat but safestrap not working. It opens and I can do a recovery but then on reboot no screen appears? I tried downloading 2 different sites 2X same problem.
Anyone else have this problem? Any suggestions appreciated
susieq29 said:
updated to kitkat but safestrap not working. It opens and I can do a recovery but then on reboot no screen appears? I tried downloading 2 different sites 2X same problem.
Anyone else have this problem? Any suggestions appreciated
Click to expand...
Click to collapse
I think if you are usingSS v3.65 it only supports JB, and once you flash the KK update SS is no longer supported. At least that's the way I understood it.
I don't get the SS menu either.
I am not using 3.65. I have downloaded 3.72 which should work with 4.4
I have an ATT Galaxy S4 and installed safestrap 3.72 no prob…flashed goldeneye no prob, used it for a cpl days then made a backup of it and tried to flash hyperdrive15 as directed by xda thread and when i rebooted just went black for a cpl mins and kept going back to safe strap so i tried to wipe again and install recovery first my golden eye backup(which i later learned was a no no on the stock rom) then my stock rom and getting i keep getting fail…something about unable to mount /system and /systemorig..so i tried advance wipe everything except extsd and also receive fail (unable to mount /system and /systemorig) only success is regular wipe but its not doing me any good. I know im a complete noob and probably did something stupid and also that you senior members hate stupid post here but please I really dont understand what happened....Also I have tried to flash golden eye rom over again and it is just going black and shutting off mid flash...I tried making a new rom slot to see if maybe i could just flash rom on new slot but no luck. I have looked EVERYWHERE and havent found anyone that has had this issue,lol which add to my feling of stupidity...ANY IDEAS???:crying:
omino323 said:
I have an ATT Galaxy S4 and installed safestrap 3.72 no prob…flashed goldeneye no prob, used it for a cpl days then made a backup of it and tried to flash hyperdrive15 as directed by xda thread and when i rebooted just went black for a cpl mins and kept going back to safe strap so i tried to wipe again and install recovery first my golden eye backup(which i later learned was a no no on the stock rom) then my stock rom and getting i keep getting fail…something about unable to mount /system and /systemorig..so i tried advance wipe everything except extsd and also receive fail (unable to mount /system and /systemorig) only success is regular wipe but its not doing me any good. I know im a complete noob and probably did something stupid and also that you senior members hate stupid post here but please I really dont understand what happened....Also I have tried to flash golden eye rom over again and it is just going black and shutting off mid flash...I tried making a new rom slot to see if maybe i could just flash rom on new slot but no luck. I have looked EVERYWHERE and havent found anyone that has had this issue,lol which add to my feling of stupidity...ANY IDEAS???:crying:
Click to expand...
Click to collapse
You did not mention your phone firmware but based on your post, your firmware might be NB1 or NC1 since you said that you successfully installed the safestrap 3.72.
You did not mention which version of GE you flashed but I guess that might be GE28 or later. If you did, those roms are based on KitKat (android 4.4.2)
You flashed the hyperdrive15 which is written for jelly beam (android 4.3) based on the rom for the MK2 firmware.
GE rom installation for safestrap did not mention to install the rom in the different slot, so I guess you installed the GE rom in the stock slot.
Hyperdrive15 installation for safestrap mentioned to create/switch slot so you may or may not install the rom in the stock slot.
As far as I know, safestrap 3.72 does not support extra rom slot other than the stock rom slot. It appears that hyperdrive instructions were written for the safestrap 3.71.
May be that was your mistake.
My suggestion been odin the stock rom that corresponding to your firmware. Use tworl root to get rooted.
sway8966 said:
You did not mention your phone firmware but based on your post, your firmware might be NB1 or NC1 since you said that you successfully installed the safestrap 3.72.
You did not mention which version of GE you flashed but I guess that might be GE28 or later. If you did, those roms are based on KitKat (android 4.4.2)
You flashed the hyperdrive15 which is written for jelly beam (android 4.3) based on the rom for the MK2 firmware.
GE rom installation for safestrap did not mention to install the rom in the different slot, so I guess you installed the GE rom in the stock slot.
Hyperdrive15 installation for safestrap mentioned to create/switch slot so you may or may not install the rom in the stock slot.
As far as I know, safestrap 3.72 does not support extra rom slot other than the stock rom slot. It appears that hyperdrive instructions were written for the safestrap 3.71.
May be that was your mistake.
My suggestion been odin the stock rom that corresponding to your firmware. Use tworl root to get rooted.
Click to expand...
Click to collapse
Thank you so much SWAY...that what i did and just started back over...you were right i was running nc1 and had GE35....so to explain the reason i used hyperdrive15 was bc i tried 17 and on first boot it stayed on boot animation for 30+mins so i figured something was wrong and shut it down...and i was also very confused bc it says to falsh correct compatibilty pack and the only one i found is for 15...am i wrong? is there one for 17 or do i just use the one for 15?...thank you again
omino323 said:
Thank you so much SWAY...that what i did and just started back over...you were right i was running nc1 and had GE35....so to explain the reason i used hyperdrive15 was bc i tried 17 and on first boot it stayed on boot animation for 30+mins so i figured something was wrong and shut it down...and i was also very confused bc it says to falsh correct compatibilty pack and the only one i found is for 15...am i wrong? is there one for 17 or do i just use the one for 15?...thank you again
Click to expand...
Click to collapse
I do not know much about the Hyperdrive since I am a GE user. Also, Hyperdrive 17 mentioned that it would work for the ATT phone but 17 is posted only the Verizon forum.
For the ATT phone with NC1 firmware the steps for flashing the custom rom involves - 1)flash the rom, 2)flash the NC1 kernel module and 3) flash the supersu.
The correct compatibility pack might be referring to the kernel module, I guess. In that case, the pack for 15 might be written for the MK2 kernel module and it might not work with your NC1 firmware.
sway8966 said:
I do not know much about the Hyperdrive since I am a GE user. Also, Hyperdrive 17 mentioned that it would work for the ATT phone but 17 is posted only the Verizon forum.
For the ATT phone with NC1 firmware the steps for flashing the custom rom involves - 1)flash the rom, 2)flash the NC1 kernel module and 3) flash the supersu.
The correct compatibility pack might be referring to the kernel module, I guess. In that case, the pack for 15 might be written for the MK2 kernel module and it might not work with your NC1 firmware.
Click to expand...
Click to collapse
Is the kernel module the att module that they say to flash to make sure wifi works or is it something else? if so any ideas on where i can find it?
again thank you for taking the time to help me...
omino323 said:
Is the kernel module the att module that they say to flash to make sure wifi works or is it something else? if so any ideas on where i can find it?
again thank you for taking the time to help me...
Click to expand...
Click to collapse
Yes. The kernel module is the att module needed to get WiFi working. It can be found after extracting the download from the deadly venom KitKat magic tool thread.
jmjoyas said:
Yes. The kernel module is the att module needed to get WiFi working. It can be found after extracting the download from the deadly venom KitKat magic tool thread.
Click to expand...
Click to collapse
thank you so much! okay so just to make completely sure...to flash hyperdrive17 just flash rom, flash module, and flash su?
Again thank you so much!
omino323 said:
thank you so much! okay so just to make completely sure...to flash hyperdrive17 just flash rom, flash module, and flash su?
Again thank you so much!
Click to expand...
Click to collapse
Yes. That should work.
So I'm currently on the Hyperdrive rom on Android 4.4.2, and I am thinking of upgrading to Lollipop, but the only thing that is holding me back is that if I upgrade to lollipop, I will not be able to unlock the SIM.
safwanz1 said:
So I'm currently on the Hyperdrive rom on Android 4.4.2, and I am thinking of upgrading to Lollipop, but the only thing that is holding me back is that if I upgrade to lollipop, I will not be able to unlock the SIM.
Click to expand...
Click to collapse
I am sure you are not talking about bootloader unlock (exploit).
I am using lollipop now. I unlocked my sim when I was using jelly bean. Sim unlock is based on the phone IMEI. As long as your EFS partition is intact, you should not be worrying about that.
So if I do Odin/FlashFire to Lollipop, my phone will remain SIM unlocked?
safwanz1 said:
So if I do Odin/FlashFire to Lollipop, my phone will remain SIM unlocked?
Click to expand...
Click to collapse
Which bootloader are you on? If you're on MDL or MDB , do not upgrade to lollipop unless you flash the stock based golden eye or gold finger roms or any other AOSP lollipop rom. If you are on any other bootloader aside from MDL or MDB, go ahead and upgrade officially.
Your phone should remain sim unlocked if you use a custom rom to upgrade like the ones meantioned above.
StoneyJSG said:
Which bootloader are you on? If you're on MDL or MDB , do not upgrade to lollipop unless you flash the stock based golden eye or gold finger roms or any other AOSP lollipop rom. If you are on any other bootloader aside from MDL or MDB, go ahead and upgrade officially.
Your phone should remain sim unlocked if you use a custom rom to upgrade like the ones meantioned above.
Click to expand...
Click to collapse
my bootloader appears to be NC1. Which method do you recommend for upgrading to Lollipop?
safwanz1 said:
my bootloader appears to be NC1. Which method do you recommend for upgrading to Lollipop?
Click to expand...
Click to collapse
Are you on safestrap? If you are, safestrap works well only in kit-kat. It is a pain to use safestrap in llolipop. I use fashfire instead.
Since you are on custom rom all you have to do is install flashfire and flash the rooted lollipop rom. The instructions can be found at here.
The instruction are written for the latest lollipop rooted rom (OK2). I stay with OC4. If you want to upgrade to OC4 do let me know. I will give you the link for the OC4.
All the necessary files and instructions can be found at here.
You might also want to download the NB1 firmware cooked by Muniz_ri. If you soft-brick your phone in the process or in the near future, that is where have to start with.
If you have questions please quote this in the reply so that I know you have a question.
sway8966 said:
Are you on safestrap? If you are, safestrap works well only in kit-kat. It is a pain to use safestrap in llolipop. I use fashfire instead.
Since you are on custom rom all you have to do is install flashfire and flash the rooted lollipop rom. The instructions can be found at here.
The instruction are written for the latest lollipop rooted rom (OK2). I stay with OC4. If you want to upgrade to OC4 do let me know. I will give you the link for the OC4.
All the necessary files and instructions can be found at here.
You might also want to download the NB1 firmware cooked by Muniz_ri. If you soft-brick your phone in the process or in the near future, that is where have to start with.
If you have questions please quote this in the reply so that I know you have a question.
Click to expand...
Click to collapse
What's the main differences between OK4 and OC4?
Yes I am on Safestrap
safwanz1 said:
What's the main differences between OK4 and OC4?
Yes I am on Safestrap
Click to expand...
Click to collapse
If you are on safestrap, you might need to uninstall it first before you upgrade to lollipop.
Well OK2 was released after OC4 so it might have some better features. But I did not have a chance to be on OK2 for long to notice it. When I was on OK2 my back button stop working so I had to downgrade to OC4.
sway8966 said:
If you are on safestrap, you might need to uninstall it first before you upgrade to lollipop.
Well OK2 was released after OC4 so it might have some better features. But I did not have a chance to be on OK2 for long to notice it. When I was on OK2 my back button stop working so I had to downgrade to OC4.
Click to expand...
Click to collapse
Thanks for clearing the air man, really appreciate it. I think I will go with the Thor ROM because it looks to be the best.
You mentioned safe strap was wierd with lollipop, in what way?
safwanz1 said:
Thanks for clearing the air man, really appreciate it. I think I will go with the Thor ROM because it looks to be the best.
You mentioned safe strap was wierd with lollipop, in what way?
Click to expand...
Click to collapse
They did not make safestrap for the lollipop. Safestrap only works on NC1 kernel. So if you were on lollipop and safestrap installed, everytime you reboot you need to tap the proceed several time finish the boot. Also if you want to use the safestrap to flash something or backup, you need to run NC1 flasher to reinstall the NC1 kernel first. Once you finish your deed, you need to flash the lollipop kernel back. That was why I said using safestrap in lollipop is a pain. You can read about that in this forum.
Download and keep this NB1 firmware. If you softbrick your phone this is the only thing that can save you.
sway8966 said:
They did not make safestrap for the lollipop. Safestrap only works on NC1 kernel. So if you were on lollipop and safestrap installed, everytime you reboot you need to tap the proceed several time finish the boot. Also if you want to use the safestrap to flash something or backup, you need to run NC1 flasher to reinstall the NC1 kernel first. Once you finish your deed, you need to flash the lollipop kernel back. That was why I said using safestrap in lollipop is a pain. You can read about that in this forum.
Download and keep this NB1 firmware. If you softbrick your phone this is the only thing that can save you.
Click to expand...
Click to collapse
Downloading the file and I'm gonna keep it on my SD card. The several time pressing thing I already have to do on my phone so I'm fine with that. Where do I get the NC1 Flasher?
safwanz1 said:
Downloading the file and I'm gonna keep it on my SD card. The several time pressing thing I already have to do on my phone so I'm fine with that. Where do I get the NC1 Flasher?
Click to expand...
Click to collapse
So, I forgot to set the reboot to download, and now I have booted into the Lollipop OS. What should I do?
safwanz1 said:
So, I forgot to set the reboot to download, and now I have booted into the Lollipop OS. What should I do?
Click to expand...
Click to collapse
You need to go to download mode so that you can flash the lollipop bootloader . If you boot into lollipop your modem, etc might not work properly.