Should I upgrade to Lollipop? - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

So I'm currently on the Hyperdrive rom on Android 4.4.2, and I am thinking of upgrading to Lollipop, but the only thing that is holding me back is that if I upgrade to lollipop, I will not be able to unlock the SIM.

safwanz1 said:
So I'm currently on the Hyperdrive rom on Android 4.4.2, and I am thinking of upgrading to Lollipop, but the only thing that is holding me back is that if I upgrade to lollipop, I will not be able to unlock the SIM.
Click to expand...
Click to collapse
I am sure you are not talking about bootloader unlock (exploit).
I am using lollipop now. I unlocked my sim when I was using jelly bean. Sim unlock is based on the phone IMEI. As long as your EFS partition is intact, you should not be worrying about that.

So if I do Odin/FlashFire to Lollipop, my phone will remain SIM unlocked?

safwanz1 said:
So if I do Odin/FlashFire to Lollipop, my phone will remain SIM unlocked?
Click to expand...
Click to collapse
Which bootloader are you on? If you're on MDL or MDB , do not upgrade to lollipop unless you flash the stock based golden eye or gold finger roms or any other AOSP lollipop rom. If you are on any other bootloader aside from MDL or MDB, go ahead and upgrade officially.
Your phone should remain sim unlocked if you use a custom rom to upgrade like the ones meantioned above.

StoneyJSG said:
Which bootloader are you on? If you're on MDL or MDB , do not upgrade to lollipop unless you flash the stock based golden eye or gold finger roms or any other AOSP lollipop rom. If you are on any other bootloader aside from MDL or MDB, go ahead and upgrade officially.
Your phone should remain sim unlocked if you use a custom rom to upgrade like the ones meantioned above.
Click to expand...
Click to collapse
my bootloader appears to be NC1. Which method do you recommend for upgrading to Lollipop?

safwanz1 said:
my bootloader appears to be NC1. Which method do you recommend for upgrading to Lollipop?
Click to expand...
Click to collapse
Are you on safestrap? If you are, safestrap works well only in kit-kat. It is a pain to use safestrap in llolipop. I use fashfire instead.
Since you are on custom rom all you have to do is install flashfire and flash the rooted lollipop rom. The instructions can be found at here.
The instruction are written for the latest lollipop rooted rom (OK2). I stay with OC4. If you want to upgrade to OC4 do let me know. I will give you the link for the OC4.
All the necessary files and instructions can be found at here.
You might also want to download the NB1 firmware cooked by Muniz_ri. If you soft-brick your phone in the process or in the near future, that is where have to start with.
If you have questions please quote this in the reply so that I know you have a question.

sway8966 said:
Are you on safestrap? If you are, safestrap works well only in kit-kat. It is a pain to use safestrap in llolipop. I use fashfire instead.
Since you are on custom rom all you have to do is install flashfire and flash the rooted lollipop rom. The instructions can be found at here.
The instruction are written for the latest lollipop rooted rom (OK2). I stay with OC4. If you want to upgrade to OC4 do let me know. I will give you the link for the OC4.
All the necessary files and instructions can be found at here.
You might also want to download the NB1 firmware cooked by Muniz_ri. If you soft-brick your phone in the process or in the near future, that is where have to start with.
If you have questions please quote this in the reply so that I know you have a question.
Click to expand...
Click to collapse
What's the main differences between OK4 and OC4?
Yes I am on Safestrap

safwanz1 said:
What's the main differences between OK4 and OC4?
Yes I am on Safestrap
Click to expand...
Click to collapse
If you are on safestrap, you might need to uninstall it first before you upgrade to lollipop.
Well OK2 was released after OC4 so it might have some better features. But I did not have a chance to be on OK2 for long to notice it. When I was on OK2 my back button stop working so I had to downgrade to OC4.

sway8966 said:
If you are on safestrap, you might need to uninstall it first before you upgrade to lollipop.
Well OK2 was released after OC4 so it might have some better features. But I did not have a chance to be on OK2 for long to notice it. When I was on OK2 my back button stop working so I had to downgrade to OC4.
Click to expand...
Click to collapse
Thanks for clearing the air man, really appreciate it. I think I will go with the Thor ROM because it looks to be the best.
You mentioned safe strap was wierd with lollipop, in what way?

safwanz1 said:
Thanks for clearing the air man, really appreciate it. I think I will go with the Thor ROM because it looks to be the best.
You mentioned safe strap was wierd with lollipop, in what way?
Click to expand...
Click to collapse
They did not make safestrap for the lollipop. Safestrap only works on NC1 kernel. So if you were on lollipop and safestrap installed, everytime you reboot you need to tap the proceed several time finish the boot. Also if you want to use the safestrap to flash something or backup, you need to run NC1 flasher to reinstall the NC1 kernel first. Once you finish your deed, you need to flash the lollipop kernel back. That was why I said using safestrap in lollipop is a pain. You can read about that in this forum.
Download and keep this NB1 firmware. If you softbrick your phone this is the only thing that can save you.

sway8966 said:
They did not make safestrap for the lollipop. Safestrap only works on NC1 kernel. So if you were on lollipop and safestrap installed, everytime you reboot you need to tap the proceed several time finish the boot. Also if you want to use the safestrap to flash something or backup, you need to run NC1 flasher to reinstall the NC1 kernel first. Once you finish your deed, you need to flash the lollipop kernel back. That was why I said using safestrap in lollipop is a pain. You can read about that in this forum.
Download and keep this NB1 firmware. If you softbrick your phone this is the only thing that can save you.
Click to expand...
Click to collapse
Downloading the file and I'm gonna keep it on my SD card. The several time pressing thing I already have to do on my phone so I'm fine with that. Where do I get the NC1 Flasher?

safwanz1 said:
Downloading the file and I'm gonna keep it on my SD card. The several time pressing thing I already have to do on my phone so I'm fine with that. Where do I get the NC1 Flasher?
Click to expand...
Click to collapse
So, I forgot to set the reboot to download, and now I have booted into the Lollipop OS. What should I do?

safwanz1 said:
So, I forgot to set the reboot to download, and now I have booted into the Lollipop OS. What should I do?
Click to expand...
Click to collapse
You need to go to download mode so that you can flash the lollipop bootloader . If you boot into lollipop your modem, etc might not work properly.

Related

[Q] On MDB now... What can I do?

Bear with me please. Upgraded to S4 from S3 that was running Task650 ROM.
I have searched and am a bit confused with the Locked, Loki Doki, MK2, etc. I have searched and cannot find info as far as what I can upgrade to without causing Locked Bootloader or other problems. I have read the FAQ's and they do not mention what to do if you are on MDB. Phone is 2 weeks old and all I have done to Root with Casual.
So what can I do with MDB without causing problems?
Thank you in advance!!!
You can do everything on mdb as you can on mdl. You can root and put a custom recovery on and use Odin. If it was me I'd use Odin to upgrade to mdl and then put cwm or twrp custom recovery on it. Then a custom Rom. You'll still need to use Loki.
jd1639 said:
You can do everything on mdb as you can on mdl. You can root and put a custom recovery on and use Odin. If it was me I'd use Odin to upgrade to mdl and then put cwm or twrp custom recovery on it. Then a custom Rom. You'll still need to use Loki.
Click to expand...
Click to collapse
Should have said. I do also have TWRP on it now.
What advantage to MDL is there?
o2man98 said:
Should have said. I do also have TWRP on it now.
What advantage to MDL is there?
Click to expand...
Click to collapse
Not much, it's just an update you can take without having to worry of locking the bootloader any tighter.
o2man98 said:
Should have said. I do also have TWRP on it now.
What advantage to MDL is there?
Click to expand...
Click to collapse
As jd said, you have freedom and you can take the MDL odin just fine. But never take any OTA's or use any other ODIN packages, and if you're running stock then freeze the OTA apps or it will force update. Other than that remember to use loki when you flash and you'll be fine.
Sent from Black<3's I337 running Hyperdrive
I thought I saw in some rom OPS a few months that devs were recommending to be on mdl before flashing their rom. Maybe when some 4.3s came out. But not sure.

[Q] HOw to revert back from MK2 (ATT SGS4 i337) to MDB or MDL

HI there,
DOes anyone have a solution for us stuck on MK2?
I have the following problems:
I bought this i337 second hand, and it came with UCUAMK2 firmware.
I rooted it with SAFEROOT (saferoot.zip). That worked fine.
But I cant install LOKI, to get the ClockWorkMod, so I can't install Custom ROMs.
Because when I type in the commands in Android Terminal, to flash loki's CWM recovery, it says :
[+] loki_flash v1.1
[-] Loki aboot version does not match device.
SO i figure, I have to revert back to MDB or MDL firmware.
BUT when I open ODIN, and try to flash the official firmware:
1. I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5
it FAILS in ODIN, so I (try) to flash this:
2.I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5
but that FAILS also!!!!!!!
SO should I install SAFESTRAP?
Some ppl complain, that screws things up, and end up in bootloop, and can't remove this SAFESTRAP...so i dunno if
i should install it.
Does flashing via/using ODIN FAIL==> because my bootloader is LOCKED?
Can you tell me how to Unlock my bootloader????
I need to go back to MDB or MDL, because otherwise I can't unlock the carrier restriction, since I'm on Vodafone,
and not on AT&T!
Plus, I was always installing custom Roms on my S2, S3, and all my other android devices since 2009....sorry to see
that the S4 is
such a headache....
Can you help me out please, seeing how good aof a DEV you are....?
Please and thank you
djmisi
You SOL buddy. Sell the phone and get something else. You will never be able to downgrade
MOTO X SLAPPED
djmisi99 said:
HI there,
DOes anyone have a solution for us stuck on MK2?
I have the following problems:
I bought this i337 second hand, and it came with UCUAMK2 firmware.
I rooted it with SAFEROOT (saferoot.zip). That worked fine.
But I cant install LOKI, to get the ClockWorkMod, so I can't install Custom ROMs.
Because when I type in the commands in Android Terminal, to flash loki's CWM recovery, it says :
[+] loki_flash v1.1
[-] Loki aboot version does not match device.
SO i figure, I have to revert back to MDB or MDL firmware.
BUT when I open ODIN, and try to flash the official firmware:
1. I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5
it FAILS in ODIN, so I (try) to flash this:
2.I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5
but that FAILS also!!!!!!!
SO should I install SAFESTRAP?
Some ppl complain, that screws things up, and end up in bootloop, and can't remove this SAFESTRAP...so i dunno if
i should install it.
Does flashing via/using ODIN FAIL==> because my bootloader is LOCKED?
Can you tell me how to Unlock my bootloader????
I need to go back to MDB or MDL, because otherwise I can't unlock the carrier restriction, since I'm on Vodafone,
and not on AT&T!
Plus, I was always installing custom Roms on my S2, S3, and all my other android devices since 2009....sorry to see
that the S4 is
such a headache....
Can you help me out please, seeing how good aof a DEV you are....?
Please and thank you
djmisi
Click to expand...
Click to collapse
You will need to use safestrap.
Loki does not work with MK2 because they patched it in the MK2 update.
At this point in time the bootloader cannot be unlocked.
el o el
The s4 is nothing like previous samsung devices...at least on att, the bootloader is locked, safestrap is your only option.
Also keep in mind, att stated about a year ago they will no longer be supporting phones with unlocked bootloaders...so the problem you are experiencing now can be expected on every new att branded phone
Sent from my SAMSUNG-SGH-I337 using Tapatalk
djmisi99 said:
HI there,
DOes anyone have a solution for us stuck on MK2?
I have the following problems:
I bought this i337 second hand, and it came with UCUAMK2 firmware.
I rooted it with SAFEROOT (saferoot.zip). That worked fine.
But I cant install LOKI, to get the ClockWorkMod, so I can't install Custom ROMs.
Because when I type in the commands in Android Terminal, to flash loki's CWM recovery, it says :
[+] loki_flash v1.1
[-] Loki aboot version does not match device.
SO i figure, I have to revert back to MDB or MDL firmware.
BUT when I open ODIN, and try to flash the official firmware:
1. I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5
it FAILS in ODIN, so I (try) to flash this:
2.I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5
but that FAILS also!!!!!!!
SO should I install SAFESTRAP?
Some ppl complain, that screws things up, and end up in bootloop, and can't remove this SAFESTRAP...so i dunno if
i should install it.
Does flashing via/using ODIN FAIL==> because my bootloader is LOCKED?
Can you tell me how to Unlock my bootloader????
I need to go back to MDB or MDL, because otherwise I can't unlock the carrier restriction, since I'm on Vodafone,
and not on AT&T!
Plus, I was always installing custom Roms on my S2, S3, and all my other android devices since 2009....sorry to see
that the S4 is
such a headache....
Can you help me out please, seeing how good aof a DEV you are....?
Please and thank you
djmisi
Click to expand...
Click to collapse
There is NO WAY back from mk2. You can flash custom roms ONLY with Safestrap. No CWM no TWRP. Read this guide, it has everything you need to know for the S4. There is nearly 30 custom roms tested & affirmed working. Good luck & happy reading.
http://forum.xda-developers.com/showthread.php?t=2616221
SGS4 AT&T i337 on Stock MK2...jeboo kernel/recovery needed to install SHOstock v3.0 ?
I am very familiar with custom roms and your kernels, from always using them on my SGS2 i777 (AT&T), but i just bought an SGS4 i337 AT&T, on MK2 baseband, and everybody suggested I should install the SHOstock v3.0 for the i337 (http://forum.xda-developers.com/show....php?t=2305752).
Problem is, I am sooooo confused now, because there is jeboo kernels: (Jeboo_Kernel_i337_v3_0a-i.zip, Jeboo_Kernel_i337_v3_0a.zip, Jeboo_Kernel_i337_v3_0.zip, Jeboo_Kernel_i337_v2_2.zip)
...than there's your RECOVERY: Jeboo_Recovery_v2_1.zip
so Im very confused now how I should go about installing our most awesome DEV shoman94's SHOstock v3.0) ROM...==> THAT I DUNNO WHAT SHOULD I DO ANYMORE.....
1. Because, on the thread there (http://forum.xda-developers.com/show....php?t=2305752), in POST#1 it says , in the Instructions, that :We must be running a custom recovery using Jeboo's Recovery from Post#4 which is your Jeboo_Recovery_v2_1.zip
2. But how should I run the Jeboo_Recovery_v2_1.zip RECOVERY, if Im on SafeStrap 3.71 (which is a recovery also)???
3. If i flash Jeboo_Recovery_v2_1.zip, wont that brick (or softbrick) the S4?
4. Or if I flash Jeboo_Recovery_v2_1.zip, will I end up having 2 recoveries? Or will I only end up with having only the Jeboo_Recovery_v2_1 ???
5. In POST#3, it says that:
IF YOUR PHONE HAS MF3/MK2 BOOTLOADERS, YOU MUST RUN THE MF3/MK2 STOCK KERNEL. DO NOT TRY INSTALLING ANYTHING BELOW UNLESS YOU HAVE MDB/MDL BOOTLOADERS THAT SUPPORT LOKI!!
So, should I NOT flash your Jeboo_Kernel_i337_v2_2.zip , since I am on MK2 stock kernel/baseband/bootloader....?
Check it out: http://i.imgur.com/cNWijKF.png
7. I mean, what is BELOW MF3/MK2 and ABOVE MDB/MDL? Because it also says, that: All binaries posted here will be loki'd (as signified by the .lok extension).
SO, keeping in mind that Im on Stock MK2 , but also Im ROOTED via SAFEROOT.zip (as you can see in the pic above: (http://i.imgur.com/cNWijKF.png) , can someone please tell me if I should flash this SHOstock v3.0, and more speciafically, WHICH, IF ANY of you jeboo kernels and Jeboo Recovery should I use?
Can I bug any of you to tell me the exact steps on how to get this SHOstock 3.0 on my i337, if I'm on MK2, rooted, and safestrap-ed?
ANy help would be much appreciated
djmisi99 said:
I am very familiar with custom roms and your kernels, from always using them on my SGS2 i777 (AT&T), but i just bought an SGS4 i337 AT&T, on MK2 baseband, and everybody suggested I should install the SHOstock v3.0 for the i337 (http://forum.xda-developers.com/show....php?t=2305752).
Problem is, I am sooooo confused now, because there is jeboo kernels: (Jeboo_Kernel_i337_v3_0a-i.zip, Jeboo_Kernel_i337_v3_0a.zip, Jeboo_Kernel_i337_v3_0.zip, Jeboo_Kernel_i337_v2_2.zip)
...than there's your RECOVERY: Jeboo_Recovery_v2_1.zip
so Im very confused now how I should go about installing our most awesome DEV shoman94's SHOstock v3.0) ROM...==> THAT I DUNNO WHAT SHOULD I DO ANYMORE.....
1. Because, on the thread there (http://forum.xda-developers.com/show....php?t=2305752), in POST#1 it says , in the Instructions, that :We must be running a custom recovery using Jeboo's Recovery from Post#4 which is your Jeboo_Recovery_v2_1.zip
2. But how should I run the Jeboo_Recovery_v2_1.zip RECOVERY, if Im on SafeStrap 3.71 (which is a recovery also)???
3. If i flash Jeboo_Recovery_v2_1.zip, wont that brick (or softbrick) the S4?
4. Or if I flash Jeboo_Recovery_v2_1.zip, will I end up having 2 recoveries? Or will I only end up with having only the Jeboo_Recovery_v2_1 ???
5. In POST#3, it says that:
IF YOUR PHONE HAS MF3/MK2 BOOTLOADERS, YOU MUST RUN THE MF3/MK2 STOCK KERNEL. DO NOT TRY INSTALLING ANYTHING BELOW UNLESS YOU HAVE MDB/MDL BOOTLOADERS THAT SUPPORT LOKI!!
So, should I NOT flash your Jeboo_Kernel_i337_v2_2.zip , since I am on MK2 stock kernel/baseband/bootloader....?
Check it out: http://i.imgur.com/cNWijKF.png
7. I mean, what is BELOW MF3/MK2 and ABOVE MDB/MDL? Because it also says, that: All binaries posted here will be loki'd (as signified by the .lok extension).
SO, keeping in mind that Im on Stock MK2 , but also Im ROOTED via SAFEROOT.zip (as you can see in the pic above: (http://i.imgur.com/cNWijKF.png) , can someone please tell me if I should flash this SHOstock v3.0, and more speciafically, WHICH, IF ANY of you jeboo kernels and Jeboo Recovery should I use?
Can I bug any of you to tell me the exact steps on how to get this SHOstock 3.0 on my i337, if I'm on MK2, rooted, and safestrap-ed?
ANy help would be much appreciated
Click to expand...
Click to collapse
You are making it too hard. You need to be on 3.71 Safestrap to flash Sho's 3.0. You must use default (stock) kernel. You can not flash any other kernels period. And no other recoveries. And no 4.4 or aosp roms. I am not on SafeStrap as I have a MDL phone. So, you need to go the SafeStrap thread and read up on flashing a rom on SafeStrap. There are a couple threads on the subject. Read all you can first and make any backup your phone/recovery allows before flashing. Also, do a clean wipe before installing rom. That may be different then a clean wipe on MDL/Custom Recovery, not sure--:good:
[email protected] said:
You SOL buddy. Sell the phone and get something else. You will never be able to downgrade
MOTO X SLAPPED
Click to expand...
Click to collapse
Problem is it came from AT&T Store with MDL ...but the MK2 update came through OTA...and that must of lock the bootloader....dayummmmmmm...
AM I right?
Yes
Maribou said:
You will need to use safestrap.
Loki does not work with MK2 because they patched it in the MK2 update.
At this point in time the bootloader cannot be unlocked.
Click to expand...
Click to collapse
Phone came from the Store with MDL, ( I see it on the Original box: SoftWare Ver: UCUAMDL....
The guy I bought it from rooted it, and loki-ed it... how did that OTA come through, I wonder? Once rooted and LOKI-ed...the OTAs shouldn't come through, right?
Sounds like the seller messed up and flashed back to stock. He was probably selling it to cut his losses.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Maribou said:
You will need to use safestrap.
Loki does not work with MK2 because they patched it in the MK2 update.
At this point in time the bootloader cannot be unlocked.
Click to expand...
Click to collapse
*************************************************************************
THX,
I just saw that the phone originally came with MDL baseband, its on the Original Box...
I wonder, was it with an unlocked bootloader at THAT time?
ANd the MK2 OTA update locked it?
djmisi99 said:
*************************************************************************
THX,
I just saw that the phone originally came with MDL baseband, its on the Original Box...
I wonder, was it with an unlocked bootloader at THAT time?
ANd the MK2 OTA update locked it?
Click to expand...
Click to collapse
Answer, yes & yes. There is plenty of custom roms for mk2 in the All things mk2 guide. You can also upgrade to 4.4.2 Kit Kat now as well. Forget about MDL cause there's no way to go back to it.
Maribou said:
You will need to use safestrap.
Loki does not work with MK2 because they patched it in the MK2 update.
At this point in time the bootloader cannot be unlocked.
Click to expand...
Click to collapse
Red_81 said:
Sounds like the seller messed up and flashed back to stock. He was probably selling it to cut his losses.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
******************************************
But if he had it LOKI-ed, that means he was just fine on MDL, no need for SafeSTrap, unlocked BL prolly ... he was free to install CM, GPE, AOSP, PACman and all these ROMs....so why flash it back to stock MK2? I mean, cutting his losses....that's funny...I mean, unless the MK2 OTA from AT&T came forced.... WHo knows...
He probably didn't know what he was doing, got stuck, and tried to Odin back to stock. Only he used the mk2 package and not the MDL one.
Stuff like that never surprises me anymore. People don't want to learn/read. Just give me the file so I can flash it.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
joeybear23 said:
el o el
Click to expand...
Click to collapse
LOL my butt, buddy...we still have SafeStrap ....ab. 30+ ROMz for it...so not exactly eL Oh eL....but oh well....such is life, ya know?
Red_81 said:
He probably didn't know what he was doing, got stuck, and tried to Odin back to stock. Only he used the mk2 package and not the MDL one.
Stuff like that never surprises me anymore. People don't want to learn/read. Just give me the file so I can flash it.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I know EXACTLY what you mean, bud...just gimme the file so I can flash it -type ... who cares what's that gonna actually do to my phone...Oh well, there are people...and there's people.... U never know who you get to deal with....
Just ask for a little help, ...why is that so hard, right?
I've been reading up on all I could, and now that I "kinda" get a better understanding of how things lay with the i337 MK2...I can make a decision to flash, and stay stock...
Problem is, I have been flashing since 2009, so I can't imagine owning a droid, AND NOT FLASH IT!!! IT KINDA DEFEATS THE PURPOSE OF OWNING AN ANDROID, right? hehehe
I know that feeling. At least Safestrap is a decent option. I rushed out to grab my MDL 32gb one before they updated their stock.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
KK 4.4 NB1 baseband
John The Rhino said:
Answer, yes & yes. There is plenty of custom roms for mk2 in the All things mk2 guide. You can also upgrade to 4.4.2 Kit Kat now as well. Forget about MDL cause there's no way to go back to it.
Click to expand...
Click to collapse
***************************************
Yes, prolly could upgrade to 4.4 , but would be needing to flash the NB1 modem, baseband first right?
ANd ppl are saying there is not much SafeStrap versions for KK 4.4(.2) yet, or am I wrong?
DO you know any ROMz like that?
Would it be possible to come back to JB 4.3, once on KK, that you know of?
Lemme know, bud...THX
ANy links.....?

[Q] Proper Rooting and SafeStrap Process NC4

Okay so I've been browsing through the forums and been reading up on this phone (even contacted Samsung about info on unlocking the bootloader, no go on that. Had to try though)
Basically I want to know what's the proper procedure for installing custom roms on an NC4 device 4.4.2
Things I know:
Bootloader is unlockable at the moment (hoping for some good news in the future)
Towelroot for rooting
Safestrap for recovery
(Both just download and install the apk)
Things I don't know:
Kernel?
Somebody said I had to flash the NC2 kernel via Odin?
Knox?
What is this? What trips it?
I did see the list of guides and I did read and watch all the necessary ones, but the date on those are from 2 years ago and I just need confirmation on if I'm going about this right.
Any help is appreciated. I thank you in advance for taking the time to read this.
Please excuse my lack of knowledge, this is my first Samsung device.
Also, what would happen if somebody were to flash the DE stock files via Odin to a Retail N3?
If you upgraded to NC4 or NK1, you're stuck until Samsung unlocks the bootloader or Verizon stops lying to their customers. There is no root available after upgrade at this moment in time.
Dravekx said:
If you upgraded to NC4 or NK1, you're stuck until Samsung unlocks the bootloader or Verizon stops lying to their customers. There is no root available after upgrade at this moment in time.
Click to expand...
Click to collapse
I didn't upgrade to NC4, it came like this.
rdar_93 said:
I didn't upgrade to NC4, it came like this.
Click to expand...
Click to collapse
That sucks. You can't do anything about it at the moment. I was forced to upgrade and lost root. Custom ROMs won't be available to you or me until someone finds a hole to unlock the bootloader. Welcome to our Verizon Note 3 rooting dilemma.
mirrin said:
You do not have a dev version so cm 11 or 12 is a far off dream you won't get. Your bootloader is locked there is no unlock.
You are in luck nc4 is root able using towel root then safe strap and the unified firmware. You will need odin and a pc for flashing a few things the NK1 modem towel root and the unified firmware. Pick a rom from the development thread i suggest jasmine 1.x or eclipse.
Click to expand...
Click to collapse
Copied from another post I had.
I don't know much about the device which is why I'm trying to find out.
Dravekx said:
That sucks. You can't do anything about it at the moment. I was forced to upgrade and lost root. Custom ROMs won't be available to you or me until someone finds a hole to unlock the bootloader. Welcome to our Verizon Note 3 rooting dilemma.
Click to expand...
Click to collapse
I actually just got root on my phone, I felt adventurous and installed towelroot and voila it rooted my phone.
I should state that I'm on 4.4.2, not 4.4.4.
Checked root status with Titanium Backup Pro, everything checked out a-okay.
rdar_93 said:
Okay so I've been browsing through the forums and been reading up on this phone (even contacted Samsung about info on unlocking the bootloader, no go on that. Had to try though)
Basically I want to know what's the proper procedure for installing custom roms on an NC4 device 4.4.2
Things I know:
Bootloader is unlockable at the moment (hoping for some good news in the future)
Towelroot for rooting
Safestrap for recovery
(Both just download and install the apk)
Things I don't know:
Kernel?
Somebody said I had to flash the NC2 kernel via Odin?
Knox?
What is this? What trips it?
I did see the list of guides and I did read and watch all the necessary ones, but the date on those are from 2 years ago and I just need confirmation on if I'm going about this right.
Any help is appreciated. I thank you in advance for taking the time to read this.
Please excuse my lack of knowledge, this is my first Samsung device.
Also, what would happen if somebody were to flash the DE stock files via Odin to a Retail N3?
Click to expand...
Click to collapse
Ahhhh... You're good to go then! Find a good custom ROM and follow the instructions. Whatever you do.. Don't upgrade!
rdar_93 said:
I actually just got root on my phone, I felt adventurous and installed towelroot and voila it rooted my phone.
I should state that I'm on 4.4.2, not 4.4.4.
Checked root status with Titanium Backup Pro, everything checked out a-okay.
Click to expand...
Click to collapse
Dravekx said:
Ahhhh... You're good to go then! Find a good custom ROM and follow the instructions. Whatever you do.. Don't upgrade!
Click to expand...
Click to collapse
Lol I still need clarification on the Kernel information that I don't know about.
What do I need to flash?
Do I flash it after I install a custom rom or before?
rdar_93 said:
Lol I still need clarification on the Kernel information that I don't know about.
What do I need to flash?
Do I flash it after I install a custom rom or before?
Click to expand...
Click to collapse
My opinion: If you're doing a custom kernel, make sure it works with whatever ROM you're flashing. I suggest sticking with the stock kernel* until you get the hang of things OR do a little research and learn a bit before you attempt anything. There's a lot of forums with details and help here. I've installed kernels before and after installing ROMs with little or zero problems, but I'm more of a dabbler than a professional.
I would suggest backing up your current setup in case you need to reflash. That's a definite.
Dravekx said:
My opinion: If you're doing a custom kernel, make sure it works with whatever ROM you're flashing. I suggest sticking with the stock kernel* until you get the hang of things OR do a little research and learn a bit before you attempt anything. There's a lot of forums with details and help here. I've installed kernels before and after installing ROMs with little or zero problems, but I'm more of a dabbler than a professional.
I would suggest backing up your current setup in case you need to reflash. That's a definite.
Click to expand...
Click to collapse
Lol that doesn't really answer the question. I hope somebody sees it and clears it up for me
rdar_93 said:
Lol that doesn't really answer the question. I hope somebody sees it and clears it up for me
Click to expand...
Click to collapse
The kernel can't be changed...although it can be "tuned" if you have root.
http://forum.xda-developers.com/showthread.php?p=58813428
Sent from my Note 3 via Tapatalk
Still hoping somebody helps me out and posts a short but precise guide to install a custom rom on 4.4.2 NC4
I don't want to end up bricking my device on the first try. I've been there already and it sucks lol
rdar_93 said:
Still hoping somebody helps me out and posts a short but precise guide to install a custom rom on 4.4.2 NC4
I don't want to end up bricking my device on the first try. I've been there already and it sucks lol
Click to expand...
Click to collapse
It really depends on the ROM, there is no set guide for all ROMs.
Did you install busybox? I like using busybox on rails. Just download the app and click install.
Download the safestrap apk (3.75 B04) and install that, open it and install recovery.
I'm currently running Clean ROM. I am on NC4. I downloaded the rom, and moved it to my SD card. I rebooted to safestrap, wiped data, cache and dalvik then installed the ROM to the stock slot. Then, following the instructions for Clean ROM, I rebooted to download mode from recovery and flashed the NC2 Kernel with odin.
The main thing is to read the installation instructions for the particular ROM you want to flash.
Don't forget to use Titanium backup to freeze SDM app (I think that's what its called) so your phone will stop trying to update.
---------- Post added at 05:29 PM ---------- Previous post was at 05:23 PM ----------
rdar_93 said:
Still hoping somebody helps me out and posts a short but precise guide to install a custom rom on 4.4.2 NC4
I don't want to end up bricking my device on the first try. I've been there already and it sucks lol
Click to expand...
Click to collapse
If you're at all proficient with Odin it is really REALLY hard to brick these phones.
BladeRunner said:
It really depends on the ROM, there is no set guide for all ROMs.
Did you install busybox? I like using busybox on rails. Just download the app and click install.
Download the safestrap apk (3.75 B04) and install that, open it and install recovery.
I'm currently running Clean ROM. I am on NC4. I downloaded the rom, and moved it to my SD card. I rebooted to safestrap, wiped data, cache and dalvik then installed the ROM to the stock slot. Then, following the instructions for Clean ROM, I rebooted to download mode from recovery and flashed the NC2 Kernel with odin.
The main thing is to read the installation instructions for the particular ROM you want to flash.
Don't forget to use Titanium backup to freeze SDM app (I think that's what its called) so your phone will stop trying to update.
---------- Post added at 05:29 PM ---------- Previous post was at 05:23 PM ----------
If you're at all proficient with Odin it is really REALLY hard to brick these phones.
Click to expand...
Click to collapse
Thanks man, I was supposed to update this thread saying that I got through with the proper procedure for installing Jasmine Rom
Although I was running Eclipse before, and I wanted to try going back to stock but it just got stuck on the Verizon splash screen
I'm thinking it's because I had the NC2 kernel active when I should have gone back to the NC4 kernel
I looked for a NC4 kernel to flash but I only saw the modems and tar files, so not knowing if those were the same as kernels I decided to just try Jasmine. So far, I like it.
I have crazy battery drain though. I think it's because I'm running it in Slot 1
just picked up a verizon note 3 android 4.4.2 NC4
one of the very first posts above says you cant do anything on NC4 and then another post says NC4 is ok but just not android 4.4.4
NC4 is the latest update as of this writing isnt it?
what can actually be done with this vzw note 3 on android 4.4.2 NC4?
non dev edition of course
what about knox?
if rooting can be done with this phone on this OS is there any safe way not to trip knox?
en11gma said:
just picked up a verizon note 3 android 4.4.2 NC4
one of the very first posts above says you cant do anything on NC4 and then another post says NC4 is ok but just not android 4.4.4
NC4 is the latest update as of this writing isnt it?
what can actually be done with this vzw note 3 on android 4.4.2 NC4?
non dev edition of course
what about knox?
if rooting can be done with this phone on this OS is there any safe way not to trip knox?
Click to expand...
Click to collapse
I'd be happy to answer your questions
If you have an NC4 device that's running 4.4.2, you are able to gain root access and install safestrap recovery on your device. However, if the android version is 4.4.4, you cannot root or install safestrap.
NC4 is just our last build number, but there are two versions I think, the 4.4.2 and the 4.4.4. In the 4.4.4, they blacklisted every single compatible kernel that could work on the device. They forgot to do it in the 4.4.2 version, that's why we're able to gain root.
On our NC4 4.4.2 Verizon Note 3, we can root, install safestrap recovery and install a very limited amount of roms from the non developer edition selection on the XDA forums.
Rooting via towelroot, to my knowledge, does not trip knox. However, installing safestrap recovery does. But if you're worried about your warranty being voided, I wouldn't panic too much because with our bootloader being locked, it is very easy to flash the original Stock Verizon files through Odin to go straight back to factory settings so it looks like if you just pulled it out the box. The knox code would be reset and you would have a device that looked like if it has never been rooted or modified.
rdar_93 said:
I'd be happy to answer your questions
If you have an NC4 device that's running 4.4.2, you are able to gain root access and install safestrap recovery on your device. However, if the android version is 4.4.4, you cannot root or install safestrap.
NC4 is just our last build number, but there are two versions I think, the 4.4.2 and the 4.4.4. In the 4.4.4, they blacklisted every single compatible kernel that could work on the device. They forgot to do it in the 4.4.2 version, that's why we're able to gain root.
On our NC4 4.4.2 Verizon Note 3, we can root, install safestrap recovery and install a very limited amount of roms from the non developer edition selection on the XDA forums.
Rooting via towelroot, to my knowledge, does not trip knox. However, installing safestrap recovery does. But if you're worried about your warranty being voided, I wouldn't panic too much because with our bootloader being locked, it is very easy to flash the original Stock Verizon files through Odin to go straight back to factory settings so it looks like if you just pulled it out the box. The knox code would be reset and you would have a device that looked like if it has never been rooted or modified.
Click to expand...
Click to collapse
Safestrap does not trip knox.
mjh68 said:
Safestrap does not trip knox.
Click to expand...
Click to collapse
Thanks. I must have tripped mine somehow cause my device says "custom" when booting.
I'm guessing it might be Xposed but I'm not too sure.
rdar_93 said:
Thanks. I must have tripped mine somehow cause my device says "custom" when booting.
I'm guessing it might be Xposed but I'm not too sure.
Click to expand...
Click to collapse
It will say custom, but that isn't tripping knox. Custom can be removed with the triangle away app. Custom just gets flagged like you were saying by changing the recovery , but it doesn't trip the knox counter.
mjh68 said:
It will say custom, but that isn't tripping knox. Custom can be removed with the triangle away app. Custom just gets flagged like you were saying by changing the recovery , but it doesn't trip the knox counter.
Click to expand...
Click to collapse
Then I must be confused about what knox really is.
What is "Knox" then?

Change to custom Rom - Help needed

Hi Friends
I have Samsung -SGH-I337 (AT&T) i already rooted it by KingRoot.
Baseband: I337UGUGOC3
KNOX: 2.3
I need to install Cynogenmod or similar rom, bcoz stock samsung rom drains battery like anything and have lot of Bloatware from AT&T
So friend let me know how to install recovery like Clockworks and then custom rom suitable got I337
vazeer said:
Hi Friends
I have Samsung -SGH-I337 (AT&T) i already rooted it by KingRoot.
Baseband: I337UGUGOC3
KNOX: 2.3
I need to install Cynogenmod or similar rom, bcoz stock samsung rom drains battery like anything and have lot of Bloatware from AT&T
So friend let me know how to install recovery like Clockworks and then custom rom suitable got I337
Click to expand...
Click to collapse
Your baseband is OC3 so you have OC3 modem. What is your bootloader?
If you bootloader is newer than MDB or MDL you can not install the custom recovery like CWM or TWRP. You are limited to Safestrap or Flashfire for flashing the custom rom.
sway8966 said:
Your baseband is OC3 so you have OC3 modem. What is your bootloader?
If you bootloader is newer than MDB or MDL you can not install the custom recovery like CWM or TWRP. You are limited to Safestrap or Flashfire for flashing the custom rom.
Click to expand...
Click to collapse
Hi,
My Bootloader is "I337UGUGOC3" is same as my baseband.
So what im suppose to do now ?
vazeer said:
Hi,
My Bootloader is "I337UGUGOC3" is same as my baseband.
So what im suppose to do now ?
Click to expand...
Click to collapse
You have a locked bootloader so you option to install the custom rom is limited to using either safestrap or flashfire.
This guide explain how to install custom using safestrap.
This guide explain updating, rooting and using safestrap. It is also useful if you screwed up and bricked your phone while flashing or tweaking.
Flashfire is newer thing and there is no separate guide written for how to use it but you can find the flashfire instructions in the custom rom that is written as flashfire friendly.
sway8966 said:
You have a locked bootloader so you option to install the custom rom is limited to using either safestrap or flashfire.
This guide explain how to install custom using safestrap.
This guide explain updating, rooting and using safestrap. It is also useful if you screwed up and bricked your phone while flashing or tweaking.
Flashfire is newer thing and there is no separate guide written for how to use it but you can find the flashfire instructions in the custom rom that is written as flashfire friendly.
Click to expand...
Click to collapse
I already went on that post but its very confusing to me, as i have OC3 bootloader, rooted with Kingroot what next, should i use Odin if yes that in put AP slot, and someplace it says OC3 to NJ4 what is that.
Can u plz tell me how to get safestrap installed (as i have rooted already) and then latest rom (that has working mobile data tethering )
vazeer said:
I already went on that post but its very confusing to me, as i have OC3 bootloader, rooted with Kingroot what next, should i use Odin if yes that in put AP slot, and someplace it says OC3 to NJ4 what is that.
Can u plz tell me how to get safestrap installed (as i have rooted already) and then latest rom (that has working mobile data tethering )
Click to expand...
Click to collapse
My first reference explains all the steps starting from the Kitkat NB1.
Since you'd already have OC3 and rooted you need to follow the step #4 Install your CUSTOM Lollipop ROM . step 4.1 explains how to install safestrap. 4.2 explains how to invoke safestrap and 4.3 explains how to install the custom rom.
I did not see OC3 to NJ4 that you were referring to though.
This thread is for installing S6 port using either safestrap or flashfire. I am just showing you as an example how to install the custom rom.
vazeer said:
Hi Friends
I have Samsung -SGH-I337 (AT&T) i already rooted it by KingRoot.
Baseband: I337UGUGOC3
KNOX: 2.3
I need to install Cynogenmod or similar rom, bcoz stock samsung rom drains battery like anything and have lot of Bloatware from AT&T
So friend let me know how to install recovery like Clockworks and then custom rom suitable got I337
Click to expand...
Click to collapse
I recommend you to do all process from NB1 to OC4/OK2 keep root (Avaliable on the INDEX) bcuz I was lazy and used kingroot to root OC4 and when I finally was into safestrap it doesn't flashed any ROM and was just a waste of time.
David_RD said:
I recommend you to do all process from NB1 to OC4/OK2 keep root (Avaliable on the INDEX) bcuz I was lazy and used kingroot to root OC4 and when I finally was into safestrap it doesn't flashed any ROM and was just a waste of time.
Click to expand...
Click to collapse
Thanks a lot guys, still my confusion is what to put in AP slot in Odin as my bootloader is OC3 and after that how to install safestrap
As David u have OC4 can u please guide me through ?
vazeer said:
Thanks a lot guys, still my confusion is what to put in AP slot in Odin as my bootloader is OC3 and after that how to install safestrap
As David u have OC4 can u please guide me through ?
Click to expand...
Click to collapse
I'm not the most indicated to show you the way because I haven't tried the keep root method yet, S4 it's my personal phone, was finishing semester and needed to be contactable.
I'm gonna try it right now and if I have success I will let u know in a couple hours?
I'm now on Albe95 LolliROM v8 ? and I'm pretty noob on this. I'll tell you step by step tomorrow cause now I'm tired ??
So did everything is working perfectly, what steps u went through ?
vazeer said:
So did everything is working perfectly, what steps u went through ?
Click to expand...
Click to collapse
Proceed at your own risk. I'm not responsible for any damage caused to your device
First we must put all the archives we will need on the SD card (Stock rooted OC4, the Custom ROM we want, OC4 modules, OC4 kernel and all we gonna need)
Make sure to read this complete, understand it and then proceed
1. I used Odin to flash back to NB1 (the rootable one)
2. Rooted with TowelRoot and installed SuperSU and FlashFire directly from PlayStore (worked for me).
3. Opened Flashfire, granted root permissions and did the Muniz_ri Keep Root Method (4.4.x to OK2) but instead of using OK2 replaced all OK2's with OC4 files because I couldn't find the OK2 modules and will be needed to flash custom ROM.
4. At this point we have OC4 rooted so we just install BusyBox (install the 'things'), then install Safestrap and inside the app install the recovery and at last install the NC1 app flasher.
5. We will automatically reboot into Safestrap recovery and there we just have to wipe (all except SD card) then we proceed to install the ROM (if the ROM has aroma installer at the end we don't reboot into system we have to go back to recovery), after modules and at last we flash (install) the Kernel (we re using OC4 base so modules and Kernel must be OC4 too).
6. From here we just have to wait, and the Safestrap robot will appear like 4 times, we just press continue and deodexed custom ROMs will take about 15-20 minutes to do the first boot.
All archives can be found here on the different threads== > http://forum.xda-developers.com/showthread.php?t=2616221 <== Remember to thank all those posts and their respective devs :good:

5.0.1 OC4 to OctOS 6.0.1 ?

i have rooted OC4 installed on my phone and have i've been reading up on OCTos and their 6.0.1 custom firmware (found a good link too: http://www.teamandroid.com/2016/01/20/update-att-galaxy-s4-i337-android-601-octos-marshmallow-custom-rom/ ) . and now am more confused.
it should be simple from what i am reading.
1) backup everything
2) revert to 4.3 (mk2), root, and install ClockworkMod 10.2+
3) install custom rom 6.0.1 OCTos
however, i'm reading on this page (http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642) but it states >> Once you flash NB1, you CANNOT go back to MK2. <<
So now I'm trying to figure out exactly how i can get the OCTos onto my phone. what guide should i follow !?!?!?!
:silly:
They meant the MK2 boot loader based devices, same with MDL. Aside from a few exploited boot loaders.. it's been the general consensus that they're all locked up, therefore.. only stock roms. The lowest boot loader you can possibly be on is NB1. Download "Terminal Emulator" for the Play Store and then when you open it up, type the following:
getprop ro.bootloader
^ exactly like that, then see what it says. The last three characters (MDK, MDL, MK2, NB1, NC1, OC3, OC4)--that's how you can figure out which boot loader you are using. I am on NB1's bootloader but I can still downgrade to MK2, i.e. Android 4.3, and still have it work.. only because of how the roms in these threads are rooted and the fact that they're stock, aside from a few other small details. When they say OC3 or MK2, or NB1... whichever.. then typically they mean the boot loader when saying you cannot revert. Definitely cannot revert to MK2 bootloader after taking an OTA update.
pr3dicament said:
getprop ro.bootloader
Click to expand...
Click to collapse
i337ucugoc4
egiblock said:
i have rooted OC4 installed on my phone and have i've been reading up on OCTos and their 6.0.1 custom firmware (found a good link too: http://www.teamandroid.com/2016/01/20/update-att-galaxy-s4-i337-android-601-octos-marshmallow-custom-rom/ ) . and now am more confused.
it should be simple from what i am reading.
1) backup everything
2) revert to 4.3 (mk2), root, and install ClockworkMod 10.2+
3) install custom rom 6.0.1 OCTos
however, i'm reading on this page (http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642) but it states >> Once you flash NB1, you CANNOT go back to MK2. <<
So now I'm trying to figure out exactly how i can get the OCTos onto my phone. what guide should i follow !?!?!?!
:silly:
Click to expand...
Click to collapse
Even though it was not mentioned, the article appears to be written for the SGH-i337 with old bootloaders (MDB, MDL). These are the only two bootloaders that can be exploited and installed the custom recovery like CWM or TWRP.
Since your bootloader is OC4 you can not install the CWM or TWRP. You could try flashing with safestrap though. If that custom rom is not written with Aroma then you could also try to flash with flashfire. These are the only two options for you.
egiblock said:
i337ucugoc4
Click to expand...
Click to collapse
Okay, yeah.. you're not on MDK or MDL, not even NB1.. you're simply on OC4. You aren't going to be able to do any flashing of any Custom Roms that are not Safestrap compatible (touchwiz)
Good luck.. you can't go anywhere backwards, not even OC3. That really sucks. I'm sorry. It looks like you took the OTA's.
I can still ODIN to NB1 and that was because I never took the OTA update. I got lucky.. I can still choose between kitkat and lollipop. You can't. You might be able to with someone's help.. but your bootloader is OC4.. that's a problem. You more than likely will have trouble doing anything unless it's not MDK/MDL or even NB1 based.
---------- Post added at 08:23 PM ---------- Previous post was at 08:21 PM ----------
sway8966 said:
Even though it was not mentioned, the article appears to be written for the SGH-i337 with old bootloaders (MDB, MDL). These are the only two bootloaders that can be exploited and installed the custom recovery like CWM or TWRP.
Since your bootloader is OC4 you can not install the CWM or TWRP. You could try flashing with safestrap though. If that custom rom is not written with Aroma then you could also try to flash with flashfire. These are the only two options for you.
Click to expand...
Click to collapse
Yeah.. You might have a shot with FlashFire. I might test that via the NB1 bootloader that I'm on but I don't think it matters that much aside from being able to Odin back to 4.3 software.
sway8966 said:
Even though it was not mentioned, the article appears to be written for the SGH-i337 with old bootloaders (MDB, MDL). These are the only two bootloaders that can be exploited and installed the custom recovery like CWM or TWRP.
Since your bootloader is OC4 you can not install the CWM or TWRP. You could try flashing with safestrap though. If that custom rom is not written with Aroma then you could also try to flash with flashfire. These are the only two options for you.
Click to expand...
Click to collapse
FlashFire came out with another release (0.32) that seems to have an AROMA emulation option.. my guess is that it's still in testing, but it's worth a shot even without it. The way I have OC3 with the NB1 boot loader is because of FlashFire.. Safestrap.. it's been awhile since I've used it. I've tried recently for other ROMS but you can't do a custom kernel.. that's the reason most custom roms aren't able to work, i.e. CM v13 runs a totally different kernel. It's not just TouchWiz now.. now it's just stock kernels.. at least via SafeStrap. So far I've gotten none to work with SafeStrap aside from Stock rooted roms. OC3, OC4, and if I felt like it, OK2.. but why even bother with OK2, I'm not gonna see any difference given all of the patches you can use with Xposed.. including any memory leak bull****, that's all good now in 5.0.x -- 5.1+ has that patched up.. and OK2 certainly isn't 5.1. I don't see any difference between OC3 and OC4.. and if my opinion counts for anything.. the one thing that I noticed (bloatware script ran and other apps not needed were frozen for both) is a very high amount of battery usage with OC4.. same userdata, same everything.. and when you flash the kernel, the modules, and move up to OC4.. it's still the same looking.. feels the same.. more ram used.. OC3 is superior in this instance. I'd love to try and give an AOSP rom a shot.. but.. via SafeStrap (someone made a guide for those not on the MDK or MDL boot loaders) .. eh.. no luck. That was all via SafeStrap. I'm just putting in my two cents. I think development for this phone is finished.. no one has come out with anything new aside from the SafeStrap kernel workarounds.. not many FlashFire users.. and the one that used to find every single exploit is now EMPLOYED by Samsung so his development.. gone. That was a huge kick in the ass to this entire community. Plenty of people around, just.. they don't give a **** about the S4 with boot loader all locked up. NB1 was an accident for me.. I was on MDL for a long, long time.. I really ****ed that up or I'd be running MarshMallow already It seems to run best with KitKat, but a lot of AOSP roms have shown huge differences in MarshMallow.. oh well. Can't try it at the moment.
Unfortunately I can't remember what I did in the past to this phone, but I have never had luck with OTA updates. I'll have to see if I can find my note to see what I originally did on this stupid thing.
egiblock said:
Unfortunately I can't remember what I did in the past to this phone, but I have never had luck with OTA updates. I'll have to see if I can find my note to see what I originally did on this stupid thing.
Click to expand...
Click to collapse
Since you are on OC4, the lowest you can go is NB1 (kit-kat).

Categories

Resources