LG G2 LS980 bricked with D802 rom - G2 Q&A, Help & Troubleshooting

Hi,
I'm living in Spain but in a trip to the US I got a LG G2 from sprint LS980. Everything was fine until I installed Xdabbeb's Camera/Video, the phone when dead, only showing the LG logo, nothing more. Tried a few thinks but nothing, so I send it to a repair shop. Big mistake!!
They flashed the LS980 with a Spanish D802 rom.....
Actual situation:
Bricked in lg logo.
Cannot access download mode since in the D802 rom doing vol + and power goes to the factory reset.
Can access to recover but when I do the adb sideload, I always getting the can't read message. Tried everything (new pc, adb in hard drive root, zip.zip....)
I did a lot of research but nothing apply to my case, since I can't access the download mode and no TWRP.
Don't know what to do more
Thanks,
Miguel

have you tried VOL up + inserting USB while phone is shut?

Related

[Q] LG G2 (vs980) BLACK SCREEN AFTER LG LOGO????

Well im kinda new to the rooting thing but I believe my phone was only soft rooted. I was trying to install twrp but I got a dead android with a explanation mark or it would go to a black screen after the lg logo.i didn't know I was soft rooted when I was trying this. so after awhile I gave up. my phone still booted normally without trying to go into recovery. recently an update for android came out ( kitkat 4.4.2) so I decided to see if it would work. it restarted the phone to install the update and it got stuck in fastboot mode. I read somewhere you can install twrp from fastboot, so I tried to fix it and now it gets stuck on a black screen after the lg logo. Ive been searching for a solution for over a week and any help would be greatly appreciated. I have a Verizon lg g2 vs980 with the stock rom if that helps...
Oh and when I plug my phone in to my pc while the black screen is on drive letters F though T pop up and the F drive has an image folder in it with random files
Similar issue... no LG logo at all
I was successful in rooting then attempted to install TWRP. The phone turned off then turned on with the "android open stomach and !" icon... it shut off a few mins later.
Now, all I get is the buzz when you power it on and a black screen. Im not able to enter the recovery mode using any combination of buttons. I cant even see the LG logo!
LG Mobile Support Tool nor my computer will even recognize the device. Am I truly bricked beyond repair?

[Q] LG G2 Stucked in Bootloop

Hey guys! First of all, sorry for my english, i'm from Argentina. I bought a used G2 last month, and in the box says it's a D806 (Argentina version), but in the options menu into de OS, it says it's a D802. I thought the guy who owned it before flashed a kitkat rom for D802, it worked fine. Then I installed CloudyG2 without problems, but today I asked myself if the phone was really a D802 or not. So I installed D806 KK baseband and a stock KK D806 rom through twrp, and when the phone started it didn't have any phone signal. I mean, I can't call, it says 'Service Disabled'. IMEI it's null too, but I have an efs backup.
When I try to get into twrp I realize I can't get into it. The white hard reset screen doesn't appear, I think I pressed the button combination (Vol - + Power) like 30 times. Then I tried to install twrp with the pc and debugging mode, the installation looked OK, but then the phone rebooted and the android robot animation appeared.
I'm stuck here guys, please help me out. It just stays there, I can't get into recovery mode, I only can get into download mode, but I also tried to install a kdz file with lg flashtool but at 2% of installation it crashes. An error appears and I can't do anything else.
I readed something about TOT files, but I'm really tired now, tomorrow I will keep trying, no recovery, no phone, no kdz flashing, I'm desperate.
Sorry for my english again, THANK YOU ALL! Please help me out

Help is there no out for this!?

HI, i need help, I have Lg G2 D802. It Hangs on LG logo screen with a blinking led. i can go to download mode but the pc just does not recognize the phone (drivers are installed)... if i connected and turn on the phone by normal way it gets stuck at lg logo but the pc recognize it, but if i connected in download mode does not recognized ! ( i need the pc recognized the g2 in download mode for using lg flash tool in order to flash .tot stock firmware) any fix??
what brought me to this is that i was on kitkat and i upgraded to lollipop everything went fine but when booted up the touch screen was crazy all over the place so i tried to go back to stock used the kdz method thats when i got the stuck logo i tried to factory reset but after clicking yes the phone reboots immediately
please help i never faced these problems with other companies i think this is my first soft brick?

Lg G2 d802 bootloop - can't access recovery

Hi,
I need some help. A while ago, my G2 dropped into water briefly. I dried it but could not get it to work, the system would be stuck in bootloop (flashing blue-green led).
I have only access to download mode, PC recognizes the phone. I've tried methods to flash both KDZ and TOT but bootloop still remains.
Can't enter recovery mode. While I keep power+vol down pressed, LG logo blinks for a moment and then it goes away. If I keep pressing the buttons, LG comes and goes.
Any ideas, please?
Thank you
tha same problem happened with me now .
help me <

LG V20 wont boot. Any help?

Hey everyone!
I've got an H990DS V20 that decided to stop booting yesterday. I get the LG logo and then it just restarts.
I've tried doing a factory reset through the recovery menu and it goes through that, but then I just get stuck with the phone restarting again.
To provide more details:
I'm not actually getting a recovery menu when I press Vol Down during boot. Instead, it JUST brings up a menu that says factory reset. Maybe this is the recovery menu? But it isn't as I'm seeing described on the internet.
So this seems important....but maybe It's normal
I've used LGUP to install the latest stock firmware for the H990ds10g.... but then I realized there is a H99010gb and H990ds10g on the website. LGUP says the version of my phone is H99010g...but it is absolutely an H990DS
Is it possible that the phone's logic board is for a non DS model and that would cause the issues if you installed the DS firmware?

Categories

Resources