Towelroot by: geohot - Nexus 7 (2013) General

Just letting everyone know that is does work for this device as well. Not sure if it's been mentioned already or not. If so and it's old news, sorry but didn't see anything posted about here although I didn't look very hard either
On the latest 4.4.4 update. So far so good. Did it's thing in less than 5sec's. Root Check was good, Installed SU from the playstore, said something about the SU Binaries or something, rebooted and bam, that msg doesn't show up anymore and all looks to be good.
Thank you geohot!

Bricking and Boot Loops on Nexus 7 2013 WI-FI
Demmonnixx said:
Just letting everyone know that is does work for this device as well. Not sure if it's been mentioned already or not. If so and it's old news, sorry but didn't see anything posted about here although I didn't look very hard either
On the latest 4.4.4 update. So far so good. Did it's thing in less than 5sec's. Root Check was good, Installed SU from the playstore, said something about the SU Binaries or something, rebooted and bam, that msg doesn't show up anymore and all looks to be good.
Thank you geohot!
Click to expand...
Click to collapse
I actually have encountered problems on two separate Nexus 7 2013 editions both in less the a day of using towelroot. One tablet with a custom kernel bricked and the other tablet while rooted with towelroot is without a custom kernel and whenever encountering a force close will reboot itself and boot loop 20-30 times before eventually booting back into Android 4.4.4. I have no definitive 'proof' that towelroot is causing these errors but I find it all a little too coincidental. I hope your device fairs better then mine.

Not sure I see the point of towelroot on a N7, one just has to flash supersu in twrp.
Edit: I guess if you don't have a pc(really? in this day and age?) or don't wanna wipe? Meh, to each their own.

Captain_FSU said:
I actually have encountered problems on two separate Nexus 7 2013 editions both in less the a day of using towelroot. One tablet with a custom kernel bricked and the other tablet while rooted with towelroot is without a custom kernel and whenever encountering a force close will reboot itself and boot loop 20-30 times before eventually booting back into Android 4.4.4. I have no definitive 'proof' that towelroot is causing these errors but I find it all a little too coincidental. I hope your device fairs better then mine.
Click to expand...
Click to collapse
Haven't had a single issue so far. Did the towel root thing and then unlocked the boot loader then flashed clean ROM and this thing has been amazing so far on all aspects. I would start from scratch fresh and clean and see if that helps anything. Good luck but if u can give a step by step on what u did first through the last step and what version of towel root u used I might be able to help

mdamaged said:
Not sure I see the point of towelroot on a N7, one just has to flash supersu in twrp.
Edit: I guess if you don't have a pc(really? in this day and age?) or don't wanna wipe? Meh, to each their own.
Click to expand...
Click to collapse
1. My computer's a desktop and 100+ miles away
2. Don't want to wipe

I tried the latest towel root on Lollipop and it says "This device is not supported"

Related

Towelroot work??

I know outside of Att note 3 it hasn't been confirmed to work but wondering if anyone tried it on other note devices? Thanks.
Sent from my iPhone using Tapatalk
Used it installed safestrap and when it reboots get the unlock symbol on the boot screen
Sent from my SM-N900V using XDA Premium 4 mobile app
Works fine on my device. For the unlock symbol, download latest SU and updated binaries. That will go away.
Sent from my SM-N900V using Tapatalk
Definitely works for getting root. Rooted, installed SuperSU, Xposed, SafeStrap all successfully. Now struggling to get a rom to work (tried Eclipse & Hyperdrive). Both say they install successfully via SafeStrap and then hangs on boot up. I've seen one other post on the Eclipse thread for the same problem, so it might be something to keep an eye on.
i can verify that this method works. i just installed superuser and it works flawlessly. the only thing is make sure to download the superuser app from here so you have the updated binaries: http://download.chainfire.eu/447/SuperSU/UPDATE-SuperSU-v1.99r4.zip
re
i have root access verified w/root checker
downloaded v1.99r4.zip and installed it
when i open it it asks for me to update binary and it fails installation
any ideas or workarounds??
lazygregg said:
i have root access verified w/root checker
downloaded v1.99r4.zip and installed it
when i open it it asks for me to update binary and it fails installation
any ideas or workarounds??
Click to expand...
Click to collapse
Rerun towelroot
re
drewcam888 said:
Rerun towelroot
Click to expand...
Click to collapse
i've done that multiple times...
reran towelroot, it reboots phone..open supersu the version that i downloaded earlier from the website and try to download supersu binary and it fails
lazygregg said:
i've done that multiple times...
reran towelroot, it reboots phone..open supersu the version that i downloaded earlier from the website and try to download supersu binary and it fails
Click to expand...
Click to collapse
I seem to be in the same boat as well. Things I have tried and it still does not work:
Installed Play Store Edition
Installed 1.99r4
Installed 1.99r5
All of them are saying I need to update binaries. While I am technically rooted and can grant permissions to apps, I need to get into SuperSU so I can modify some settings.
There are several others have issues on Reddit as well, so its not a couple of people.
exaltedgod said:
I seem to be in the same boat as well. Things I have tried and it still does not work:
Installed Play Store Edition
Installed 1.99r4
Installed 1.99r5
All of them are saying I need to update binaries. While I am technically rooted and can grant permissions to apps, I need to get into SuperSU so I can modify some settings.
There are several others have issues on Reddit as well, so its not a couple of people.
Click to expand...
Click to collapse
Try this. Install safestrap 3.7x. Open it, give su permission, install recovery, hit the home button. Open supersu, update binary thru cwm/twrp. Don't click to reboot phone into recovery from supersu. Hold down home and bring safestrap back up. Reboot to recovery from there and it should update the binary. Hope this helps.
Sent from my SM-N900V using XDA Premium HD app
Dc4479 said:
Try this. Install safestrap 3.7x. Open it, give su permission, install recovery, hit the home button. Open supersu, update binary thru cwm/twrp. Don't click to reboot phone into recovery from supersu. Hold down home and bring safestrap back up. Reboot to recovery from there and it should update the binary. Hope this helps.
Click to expand...
Click to collapse
This is being very peculiar. After I installed Safe Strap, SuperSU went fine, able to get in and do what I needed to get done. I reboot into recovery. Made a backup, and rebooted system. Went right to SuperSU again. And the same issue occurs, constantly asking for updated binaries. I am trying everyone once more to make it all work. If not, then I will just stick with what I have and hopefully it doesn't cause any other issues.
Thank you for the help thus far. :good:
exaltedgod said:
This is being very peculiar. After I installed Safe Strap, SuperSU went fine, able to get in and do what I needed to get done. I reboot into recovery. Made a backup, and rebooted system. Went right to SuperSU again. And the same issue occurs, constantly asking for updated binaries. I am trying everyone once more to make it all work. If not, then I will just stick with what I have and hopefully it doesn't cause any other issues.
Thank you for the help thus far. :good:
Click to expand...
Click to collapse
Yeah I just did all this last night...I installed SafeStrap and installed Recovery, then went into SuperSU and clicked Normal when asking for updating Binaries and it hasnt asked again thankfully. All of this of course was after installing BusyBox from the Play Store.
Note though: Safestrap isnt working for flashing roms just yet, just like someone else said here, and someone else said this in the Jasmine Rom forum. I just tried it myself and everything looks fine when installing, but then when you boot up, screen goes black and unresponsive after the SS splash screen on a reboot. Hopefully we have an update to SS soon. Fair warning - make sure you create a backup of your System/Data, etc in SS before messing around...it makes it so much easier to restore in case something screws up.
pmt223 said:
Yeah I just did all this last night...I installed SafeStrap and installed Recovery, then went into SuperSU and clicked Normal when asking for updating Binaries and it hasnt asked again thankfully. All of this of course was after installing BusyBox from the Play Store.
Note though: Safestrap isnt working for flashing roms just yet, just like someone else said here, and someone else said this in the Jasmine Rom forum. I just tried it myself and everything looks fine when installing, but then when you boot up, screen goes black and unresponsive after the SS splash screen on a reboot. Hopefully we have an update to SS soon. Fair warning - make sure you create a backup of your System/Data, etc in SS before messing around...it makes it so much easier to restore in case something screws up.
Click to expand...
Click to collapse
So, can someone enlighten me on what this "root" does? I've been running SafeStrap 3.72 with HyperROM 8 and just yesterday, successfully installed Towelroot on my Verizon Note 3. I downloaded the new SU to my SDcard before running Towelroot and was able to run it immediately after root and all looks good. But... what did I actually gain? Can I now install Cyanogen or others? I am a bit fuzzy on the difference, if any, on a rooted phone vs. an unlocked bootloader. Those of us on the Verizon retail Note 3 still don't have unlocked bootloaders do we? I miss the ease of playing with my old S3! LOL. Thanks!
emtownsend said:
So, can someone enlighten me on what this "root" does? I've been running SafeStrap 3.72 with HyperROM 8 and just yesterday, successfully installed Towelroot on my Verizon Note 3. I downloaded the new SU to my SDcard before running Towelroot and was able to run it immediately after root and all looks good. But... what did I actually gain? Can I now install Cyanogen or others? I am a bit fuzzy on the difference, if any, on a rooted phone vs. an unlocked bootloader. Those of us on the Verizon retail Note 3 still don't have unlocked bootloaders do we? I miss the ease of playing with my old S3! LOL. Thanks!
Click to expand...
Click to collapse
No, you dont gain an unlocked bootlader. At this point, only the Almighty will make that happen lol. For us with Verizon Notes (and some others), this helps the folks who either a) dont want to use Kingo or the other web methods, and b) folks who were on stock 4.4.2 NC4, like from an OTA (like me). This now gave me root, where when the OTA came out people were fearing there would never be a root for it (thanks to everyone else who put monies towards a bounty). Many people as well as myself cannot use SafeStrap successfully to fully flash a rom yet (you'll see this remarked in a lot of places), so Im sure there is an update forthcoming. In the meantime, I can use TB and freeze/uninstall a lot of the bloatware crap, and use Xposed for whatever else, which is fine by me. But no, we are still a no-go on full rooting and unlocked bootladers like on some other phones, which means no CyanogenMod, etc.
pmt223 said:
No, you dont gain an unlocked bootlader. At this point, only the Almighty will make that happen lol. For us with Verizon Notes (and some others), this helps the folks who either a) dont want to use Kingo or the other web methods, and b) folks who were on stock 4.4.2 NC4, like from an OTA (like me). This now gave me root, where when the OTA came out people were fearing there would never be a root for it (thanks to everyone else who put monies towards a bounty). Many people as well as myself cannot use SafeStrap successfully to fully flash a rom yet (you'll see this remarked in a lot of places), so Im sure there is an update forthcoming. In the meantime, I can use TB and freeze/uninstall a lot of the bloatware crap, and use Xposed for whatever else, which is fine by me. But no, we are still a no-go on full rooting and unlocked bootladers like on some other phones, which means no CyanogenMod, etc.
Click to expand...
Click to collapse
Ah. Got it. Thanks!
* I successfully used SafeStrap to install HyperROM 8 on slot 1 only, so I had to lose my stock ROM, but I'm OK with that.
cnotes2019 said:
I know outside of Att note 3 it hasn't been confirmed to work but wondering if anyone tried it on other note devices? Thanks.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
i rooted today with towelroot. i have a verizon note 3 on 4.4.2

Xposed for Samsung Galaxy J3

Hey! So recently I got a Samsung Galaxy J3 and was wondering if it was possible to get Xposed on it? Flashing a Zip is not an option, by the way.
Hey man, I'm right there with you, I want to know as well. I hope this thread gets more attention! I got this phone recently myself and am so far very sad at the lack of ability to do things with it root-wise, such as getting root to frickin stick and getting things like Xposed installed (with-out boot looping your device....).
Hi,
If you're on 5.0.x, flash Xposed by arter97.
If you're on 5.1.x, flash Xposed by wanam.
Find both on Xposed General thread.
Sent from my ASUS_Z00AD
krasCGQ said:
Hi,
If you're on 5.0.x, flash Xposed by arter97.
If you're on 5.1.x, flash Xposed by wanam.
Find both on Xposed General thread.
Sent from my ASUS_Z00AD
Click to expand...
Click to collapse
The problem is that I don't have custom recovery either, and I'm not yet experienced enough to know how to flash something like xposed without it, without bootlooping. I actually already have the xposed you're talking about, wanam is what I need since im on 5.1, so if someone guides me on how to flash it or at least points me in the right direction, maybe that'd help.
Also as a side question, somewhat related to this, anyone know what I should do about custom recovery? There are models close to mine but not the exact same that are covered by TWRP or CWMR, but I've been very strongly advised against such a course of action.
darknaio said:
The problem is that I don't have custom recovery either, and I'm not yet experienced enough to know how to flash something like xposed without it, without bootlooping. I actually already have the xposed you're talking about, wanam is what I need since im on 5.1, so if someone guides me on how to flash it or at least points me in the right direction, maybe that'd help.
Also as a side question, somewhat related to this, anyone know what I should do about custom recovery? There are models close to mine but not the exact same that are covered by TWRP or CWMR, but I've been very strongly advised against such a course of action.
Click to expand...
Click to collapse
I'd recommend TWRP, actually. If your device doesn't have a custom recovery developed, it could be a pain. Just hoping if someone could develop it one for your device.
Sent from my ASUS_Z00AD
krasCGQ said:
I'd recommend TWRP, actually. If your device doesn't have a custom recovery developed, it could be a pain. Just hoping if someone could develop it one for your device.
Sent from my ASUS_Z00AD
Click to expand...
Click to collapse
I would agree with you, as I had TWRP on my last phone and liked it quite a bit. I just don't know which phone's TWRP to try and how to try and flash it on there. Do I do it through Odin? Theres (if I recall correctly) a TWRP for the Samsung Galaxy J2 and J5, on either side of my J3 (Which it's so odd that the newer phone came out with a "series" number in the middle like that). Which would you suggest I do, J2 or J5, or neither?
darknaio said:
Hey man, I'm right there with you, I want to know as well. I hope this thread gets more attention! I got this phone recently myself and am so far very sad at the lack of ability to do things with it root-wise, such as getting root to frickin stick and getting things like Xposed installed (with-out boot looping your device....).
Click to expand...
Click to collapse
Me being dumb, I tried manually installing the required files for Xposed a few weeks ago and it bricked immediately. So I had to get a replacement. I'm not sure if it's because I did it wrong but based on that I don't think we'll ever be able to install Xposed which really sucks. Coming from my previous phone which had a lot of tweaks from xposed it just feels weird using a normal phone.
darknaio said:
am so far very sad at the lack of ability to do things with it root-wise, such as getting root to frickin stick
Click to expand...
Click to collapse
I know what you mean. Every time I restart my phone I have to re-root it if I want to do something with it. Luckily I don't really need root on this phone. Mainly because of the lack of things you can do with it. Hoping to see something come out of this though
EqiiKxDude said:
Me being dumb, I tried manually installing the required files for Xposed a few weeks ago and it bricked immediately. So I had to get a replacement. I'm not sure if it's because I did it wrong but based on that I don't think we'll ever be able to install Xposed which really sucks. Coming from my previous phone which had a lot of tweaks from xposed it just feels weird using a normal phone.
Click to expand...
Click to collapse
I know exactly what you both mean. My previous crappy phone had loads of things from xposed on there that I missed. However the good news I guess is since I don't need certain UI tweaks because I'm satisfied with what this phone comes with I'm not missing out on too much. And thus far every time I get bootloop I just use Odin to flash a copy of the original firmware and somehow it doesn't reset everything so I can still keep trying without losing all my apps. Just haven't found anything that sticks. Maybe one of us should try a custom recovery from a different Samsung Galaxy J Series like the 2 or 5.
darknaio said:
I know exactly what you both mean. My previous crappy phone had loads of things from xposed on there that I missed. However the good news I guess is since I don't need certain UI tweaks because I'm satisfied with what this phone comes with I'm not missing out on too much. And thus far every time I get bootloop I just use Odin to flash a copy of the original firmware and somehow it doesn't reset everything so I can still keep trying without losing all my apps. Just haven't found anything that sticks. Maybe one of us should try a custom recovery from a different Samsung Galaxy J Series like the 2 or 5.
Click to expand...
Click to collapse
Yeah I mainly used Xposed on my previous phone to make it look more like Lollipop but since this phone comes with it I don't need it as much. And I didn't know you were able to unbrick this phone? I would have saved about $40 if I knew that ? well then yeah we should probably try one of them. I think we should go with the newest one though
Thats what I was thinking, but I don't know which J series came out before the J3 this year or I'd try that one. And yep, luckily able to unbrick it thanks to Odin. Actually unbricked it from even worse than a boot loop, I accidentally destroyed my recovery somehow so I couldn't even boot into that and do a factory reset, but thankfully Odin's separate from the recovery so it still worked. End of the day if you can at least get your phone recognized by your computer and can flash something onto it, flashing stock = unbrick (usually).
I own the J3 also. Have gained temp root via king root so I could debloat the system. We need a cf auto root option. Our device is 5.1.1 and I think the kernel has to be modified for true root. Then development can start. As for xposed,you need full root for that to work properly. I suggest to you all to get a copy of the device firmware,install odin on pc so you can reinstall firmware if you decide to use temp root and end up boot looped after debloating to much or making other potentially harmful changes.
Curtis1973 said:
I own the J3 also. Have gained temp root via king root so I could debloat the system. We need a cf auto root option. Our device is 5.1.1 and I think the kernel has to be modified for true root. Then development can start. As for xposed,you need full root for that to work properly. I suggest to you all to get a copy of the device firmware,install odin on pc so you can reinstall firmware if you decide to use temp root and end up boot looped after debloating to much or making other potentially harmful changes.
Click to expand...
Click to collapse
I have the same thing, temp root that's lost when I reboot. I've already had to go the Odin route with the original firmware so I've got my backup covered. I'm also working with the dev behind Super Sume and he thinks he has the issue resolved, if not he's going to teamview with me to try and get past this. If we manage to solve the problem I'll post the results and subsequent steps here. Hopefully this will lead to root sticking through reboot. If so then at minimum may be able to solve -some- of the problems. Though I don't know if this will fix Xposed not working, as it always caused me to boot-loop in the past (only solved by going into TWRP and rebooting from there) and even if root sticks the only way to flash Xposed according to current theories is to do so from custom recovery, which I haven't found one for this device yet.
Have you been able to get a custom recovery on your J3? If so that would be the other key part to solving a lot of these problems. If I get the Super Sume to work and someone else can manage to get a custom recovery working, maybe that'll be the start of this device's support here =D.
No but I believe by repacking an edited firnware you can add xposed that way.
Curtis1973 said:
No but I believe by repacking an edited firnware you can add xposed that way.
Click to expand...
Click to collapse
Unfortunately I wouldn't know the first thing about editing a firmware, much less be able to add Xposed lol. Could that be a way to manually add custom recovery? Or are we still dependent on someone making a version compatible with this phone?
will need a custom recovery built for the device. with proper root you could then use flashify to install it to the device. root opens the door for everything. temp root will never get much except ability to debloat the device.
---------- Post added at 08:17 AM ---------- Previous post was at 08:15 AM ----------
i reached out to chainfire in hopes of cf auto root for the j3. but have not heard back. but does not mean i wont. will see. otherwise i will keep on trying what i can.
Quick question. Has anyone updated their J3 yet? I keep getting a notification for a Software update, is it safe?
EqiiKxDude said:
Quick question. Has anyone updated their J3 yet? I keep getting a notification for a Software update, is it safe?
Click to expand...
Click to collapse
Ive been seeing that too and ignoring/swiping it away. Not sure what it is though.
my system is edited so im not getting update pushes. probably nothing significant.
Curtis1973 said:
my system is edited so im not getting update pushes. probably nothing significant.
Click to expand...
Click to collapse
Your J3 is modified? Temp root, or something else?

Beginner root question on opp2.170420.019

Hey guys,
This is almost certainly a stupid question but I would be grateful for any help. I have a Nexus 6p thats upgraded to the lastest Android O beta version of OPP2. I wanted to finally go around rooting it. I have enabled USB debugging, always allowed the PC's RSA fingerprint and checked allow OEM unlocking. Nothing else has been done before, I plan on following a step by step guide that will help me unlock bootloader, install custom recovery and root etc.
I tried googling and to my surprise I could not find any root guide for this version of Nexus 6p (maybe I am just blind?)
Just tossing this out there. Old, but should still do what you need. Now that I think about it, I should probably go ahead and update parts of it....
Android Job Box
Woah. Cheers mate! so i just need to plug my Nexus 6p in, execute the file and click on unlock bootloader? I assume i have to install super su after that and that will be it? :3 Sorry. I know i am asking stupid questions and you are obv a pro. Also the fact that my version is opp2.170420.019 makes no difference right?
chevycam94 said:
Just tossing this out there. Old, but should still do what you need. Now that I think about it, I should probably go ahead and update parts of it....
Android Job Box
Click to expand...
Click to collapse
No, shouldnt make a difference. SHOULDNT. lol
The first thing I would do is download TheFlash's TWRP build, and flash that using the tool once you have your bootloader unlocked. That can be a lifesaver. Let me know if you have any questions. Questions directly about the tool, please post in my tools release thread.
Allrighty then, ill take the plunge real soon! Thank you for all the help Any specific why I should go with TheFlash's build instead of this one: dl.twrp(dot)me/angler/? As far as I can see it only supports F2FS which I will probably not be using.
chevycam94 said:
No, shouldnt make a difference. SHOULDNT. lol
The first thing I would do is download TheFlash's TWRP build, and flash that using the tool once you have your bootloader unlocked. That can be a lifesaver. Let me know if you have any questions. Questions directly about the tool, please post in my tools release thread.
Click to expand...
Click to collapse
None, specifically. But he seems to always be ahead of the curve for almost everything he does. And I really like his work. Personal preference I guess.
Well your tool works well Bootlocker unlocked and TWRP isntalled. But i flashed the SR3-SuperSU-v2.79-SR3-20170114223742.zip and nothings happening. there is a super su app in the drawer but when i click it it says super su binary not installed. Dont suppose you would have any idea why this is?
Update: okay false alarm. installed supersu v2.8 and appears to be rooted now. although super su keeps on crashing.
Update2: actually no, not working properly. Some apps are getting root - others arent I guess
chevycam94 said:
None, specifically. But he seems to always be ahead of the curve for almost everything he does. And I really like his work. Personal preference I guess.
Click to expand...
Click to collapse
UsmanPirzada said:
Well your tool works well Bootlocker unlocked and TWRP isntalled. But i flashed the SR3-SuperSU-v2.79-SR3-20170114223742.zip and nothings happening. there is a super su app in the drawer but when i click it it says super su binary not installed. Dont suppose you would have any idea why this is?
Update: okay false alarm. installed supersu v2.8 and appears to be rooted now. although super su keeps on crashing.
Update2: actually no, not working properly. Some apps are getting root - others arent I guess
Click to expand...
Click to collapse
Only SuperSU 2.79 SR4 or Magisk v13 will have functional root on Android O.
Magisk:
https://github.com/stangri/MagiskFiles
SuperSU:
https://download.chainfire.eu/1024/...-SR4-20170323220017-ODP1-5X-6P-ExtraDelay.zip
Even more unstable lol, built for OPP1 not OPP2 apparently. Phone actually crashing now and rebooting after a few mins. Meh, srsly cold feet, am out. Going to flash it back to stock. hope that works atleast.
chevycam94 said:
Only SuperSU 2.79 SR4 or Magisk v13 will have functional root on Android O.
Magisk:
https://github.com/stangri/MagiskFiles
SuperSU:
https://download.chainfire.eu/1024/...-SR4-20170323220017-ODP1-5X-6P-ExtraDelay.zip
Click to expand...
Click to collapse
UsmanPirzada said:
Even more unstable lol, built for OPP1 not OPP2 apparently. Phone actually crashing now and rebooting after a few mins. Meh, srsly cold feet, am out. Going to flash it back to stock. hope that works atleast.
Click to expand...
Click to collapse
It works the same on OPP1 and OPP2. But all in all, you'll have better luck with Magisk v13.
I flashed it to 7.1.1 N4F26T using NRT and now the it has severe lag and keeps freezing and screen isnt accepting touch commands. Since this is a fresh install I assume the RSA fingerprint and USB Debuugging option has been unchecked as well? I have downloaded the official stock image of 7.1.2. Can I apply it using recovery or something?
chevycam94 said:
It works the same on OPP1 and OPP2. But all in all, you'll have better luck with Magisk v13.
Click to expand...
Click to collapse
Okay, flashed it to 7.1.2 using recovery. Everything seems fine now. Thank god. Helpful tip to any noob out there trying to root Android O Beta 2 on your nexus 6p: dont.

I think I goofed... bad. Sm-n900v 5.0 stock

Well the title says alot... let me explain..
I've got a note 5 and LG g5. This note 3 is an extra phone. So I figured I would root and rom it.
I started on 4.4.2 and it wouldn't boot...
Ran Odin 3.09 and loaded pl1...couldn't root.
Ran Odin 3.09 again with ob6. Root success.
I then followed instructions for unlock_n3 for the bootloader and also installed twrp.
Last night I went on a spree with roms trying to find a working rom with data... no success... I felt like I was doing something wrong so I went back to Odin and ran ob6 again which is where I'm at now.
In the process I dev'd my phone... and now I cannot get root and lost twrp in the process.
Did I eff up?
What's next from here? I don't care about Knox and like I said I've got 2 other phones both working and paid off. This is my "car phone". I use it for music and that's about it. That being said I would rather have working data instead of using my note 5 with Hotspot mode.
My device is now hlte... not hltevzw... I think I did something very wrong. Please halp.
If it helps I did take pictures along the way when running the unlock_n3 over adb. I've got the original emmc ID but I'm not sure if this step is reversable.
I also made a backup with twrp... but it seems my SD card was wiped at some point last night.
Please don't flame... I admit this was my stupidity and I'm sure I'm not the only one who makes mistakes. At this point I'll be happy with anything 5.0 and root. As I said above if Knox is a concern I don't really care. Phones paid off... and I've got a note 5 and when that dies I'll get a 7. Also have LG g5 as a backup.
What are my options now oh wise xda gods?
Edit: I ran arabictool again, and got a 5.0 not found error. Decided to try kingoroot, and it says succeeded, however upon running root checker, it says "Sorry! Root access is not properly installed on this device"
Edit2: After trying edit 1... im now im a bootloop, and I check vol+, home, and power and twrp is indeed gone.
When I get home I plan to Odin OB6 again, as it worked, and since i've already done it once I assume I cant do any further damage :\
Edit3: I've successfully flash back to OB6, and as expected, ive finally tripped knox. Damn near 5 years with a note 3, and JUST tripped it. Not bad if I do say so my self... although, theres still more work to be done :\
GGRRRR, I wont give up so easily! But I could use some advice
tbonedude said:
Well the title says alot... let me explain..
I've got a note 5 and LG g5. This note 3 is an extra phone. So I figured I would root and rom it.
I started on 4.4.2 and it wouldn't boot...
Ran Odin 3.09 and loaded pl1...couldn't root.
Ran Odin 3.09 again with ob6. Root success.
I then followed instructions for unlock_n3 for the bootloader and also installed twrp.
Last night I went on a spree with roms trying to find a working rom with data... no success... I felt like I was doing something wrong so I went back to Odin and ran ob6 again which is where I'm at now.
In the process I dev'd my phone... and now I cannot get root and lost twrp in the process.
Did I eff up?
What's next from here? I don't care about Knox and like I said I've got 2 other phones both working and paid off. This is my "car phone". I use it for music and that's about it. That being said I would rather have working data instead of using my note 5 with Hotspot mode.
My device is now hlte... not hltevzw... I think I did something very wrong. Please halp.
If it helps I did take pictures along the way when running the unlock_n3 over adb. I've got the original emmc ID but I'm not sure if this step is reversable.
I also made a backup with twrp... but it seems my SD card was wiped at some point last night.
Please don't flame... I admit this was my stupidity and I'm sure I'm not the only one who makes mistakes. At this point I'll be happy with anything 5.0 and root. As I said above if Knox is a concern I don't really care. Phones paid off... and I've got a note 5 and when that dies I'll get a 7. Also have LG g5 as a backup.
What are my options now oh wise xda gods?
Edit: I ran arabictool again, and got a 5.0 not found error. Decided to try kingoroot, and it says succeeded, however upon running root checker, it says "Sorry! Root access is not properly installed on this device"
Edit2: After trying edit 1... im now im a bootloop, and I check vol+, home, and power and twrp is indeed gone.
When I get home I plan to Odin OB6 again, as it worked, and since i've already done it once I assume I cant do any further damage :\
Edit3: I've successfully flash back to OB6, and as expected, ive finally tripped knox. Damn near 5 years with a note 3, and JUST tripped it. Not bad if I do say so my self... although, theres still more work to be done :\
GGRRRR, I wont give up so easily! But I could use some advice
Click to expand...
Click to collapse
You need to go thru your original steps again, root, unlock and then TWRP make sure it is the hltevzw version,
Sent from my SM-N900V using Tapatalk
donc113 said:
You need to go thru your original steps again, root, unlock and then TWRP make sure it is the hltevzw version,
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply, as of edit 3, I am back on OB6, and cannot seem to get root. Are my chances better with OF1?
Ive tried yemen tools (says 5.0 not found)
I've tried kingo root (says successful, never reboots, and shows "this phone root isnt properly setup" when checking with root checker from joey kilm (think thats his name)
Does it matter my emmc ID is ending with 43100?
https://cdn.discordapp.com/attachments/221482708063223809/378367914388094981/image.png <- image from unlock_n3 after success, emmc checker shows same value AFTER odin ob6 (this held, nothing else did)
Edit: After taking donc's recommendation of OF1, I am now able to run yemen tools. As a side note, I seem to have more bars of service with OF1... coincidence?
Edit2: I HAVE ROOT! on OF1 using yemen tools (downgraded from PL1 to OB6 finally to OB1 and it worked.) Now to re-unlock bootloader. Thanks guys for the support thus far, this is a journey and having qualified accomplices makes this SOOOO much easier.
So heres where im at now.. as a recap for personal use, and anyone else who may be on a similar path.
Start to finish, this is what I did, where im at now, and where I want to be by tonight
Got phone, 4.4.2 with bootloop, couldn't find 4.4.2 firmware online
Flashed 5.0 (PL1), no root available.
Flashed 5.0 (OB6) rooted, unlocked boot loader, twrp, played with roms, got frustrated, re-flashed OB6 and couldn't root again (seems flimsy)
Flashed 5.0 (OF1) rooted, unlocked boot loader, verified several times root is working. Installed SuperSu and busybox.
This is where im at now, about to install twrp since i've done this already with ob6, and was working fine (though, I would prefer to have philz, and multi rom slots)
This entire process i've been using Odin 3.09, Twrp 3.0.2-1. My note 3 has been changed to a dev ID ending in 3100 (see above posts) this seems to have held through entire process with multiple recoveries.
I am going to make a full backup (again...) and unlike last time... store this copy onto my PC instead of SDcard alone... this was my mistake, and I need to learn from it.
For the @dev's out there, is there anything I can provide to help this overall process and community in general? I'm fairly literate in adb/linux and have no issues running commands, uploading files, or anything similar.
Shout out to @donc113 above for stating the obvious (since i failed to search and find the proper methods) as well as giving me the kick in the pants I needed to push onwards and succeed. Thanks brotha. :good:
tbonedude said:
So heres where im at now.. as a recap for personal use, and anyone else who may be on a similar path.
Start to finish, this is what I did, where im at now, and where I want to be by tonight
Got phone, 4.4.2 with bootloop, couldn't find 4.4.2 firmware online
Flashed 5.0 (PL1), no root available.
Flashed 5.0 (OB6) rooted, unlocked boot loader, twrp, played with roms, got frustrated, re-flashed OB6 and couldn't root again (seems flimsy)
Flashed 5.0 (OF1) rooted, unlocked boot loader, verified several times root is working. Installed SuperSu and busybox.
This is where im at now, about to install twrp since i've done this already with ob6, and was working fine (though, I would prefer to have philz, and multi rom slots)
This entire process i've been using Odin 3.09, Twrp 3.0.2-1. My note 3 has been changed to a dev ID ending in 3100 (see above posts) this seems to have held through entire process with multiple recoveries.
I am going to make a full backup (again...) and unlike last time... store this copy onto my PC instead of SDcard alone... this was my mistake, and I need to learn from it.
For the @dev's out there, is there anything I can provide to help this overall process and community in general? I'm fairly literate in adb/linux and have no issues running commands, uploading files, or anything similar.
Shout out to @donc113 above for stating the obvious (since i failed to search and find the proper methods) as well as giving me the kick in the pants I needed to push onwards and succeed. Thanks brotha. :good:
Click to expand...
Click to collapse
You're welcome. Just an FYI, the ending of the CID doesn't matter, it's the first 2 numbers that count, and they MUST be 15
I used Flashify (available on Google Play) to load TWRP... worked great (but you must have root and busybox installed to use it to flash TWRP)
Sent from my SM-N900V using Tapatalk

(Lots of words) I want to understand why I lose root instead of just flashing to fix

Let me start by saying I never gave rooted phones much though. I knew of them but never even knew anyone that ever had one. I figured the Galaxy S8 (G950U) would be a good phone to start with:laugh: Since it was my first rooted phone I couldn't resist experimenting, a lot. So I would flash this flash that, whatever I thought had a very small chance of working i flashed, lol. I usually would end up having to fireing up Odin and flashing the most important files on my PC, Partcyborg's awesome work, which I can flash with my eyes closed basically by now :laugh: Some things I would flash would just cause me to lose root though. It's driving me nuts not to be able to get it back without Odin. I could use Odin+Partcyborg's rom and have it back in 15 minutes, but I'm tired of being feed I'm ready to hunt, lol.
The thing is, I still have TWRP Safestrap custom recovery that I can access. I flash Supersu, it appears to flash fine but changes nothing, not even an SU icon in the app drawer. I did make SupoerSU Pro a system app a while ago, was that a mistake? I see it in the Apps list in Settings but I can't do much there except disable it and enable it (no it's not disabled,lol)
How can I get root back using custom recovery only? What should I have checked in Safestrap when flashing SuperSU?, Cache, System, Modem, etc? If anyone would care to explain some of the reasons I lose root but not custom recovery it would really calm my curiosity . I'm sure it would help a lot of other noobs also.
Boot animations is another thing that I find very interesting. Trying to change it has been the cause of at least 10 factory resets
I go to /system/media/ and swap out Booitanimation.zip, change the permission then I either get no change or I have reflash with Odin. What is all the files labeled Battery _000 Battery _001 Battery_002 all the way to Battery_100? Does the resolution need to be exactly the same as stock?
Is my rooted S8 not as rooted as other rooted phone? Lol, does that sentence make sense? Because of its locked bootloader and lack of custom roms is why I ask. Am I an idiot for buying a S9+ (G965U) since I love having root? I was hoping someone "cough...Part...cough cough...cyborg would be on it. If not though, no big deal. I do still have the S8 and still use it a lot even though it has no service, lol. Amazing phones not so amazing bootloaders though:laugh:
Thanks for reading. If you only skimmed it, thank you also. I know it's very long, lol. I just found something called a Combination Rom. Since I still have Safestrap I'm gonna do what I usually do, flash it and ask questions later:laugh:
Gregbmil1 said:
Let me start by saying I never gave rooted phones much though. I knew of them but never even knew anyone that ever had one. I figured the Galaxy S8 (G950U) would be a good phone to start with:laugh: Since it was my first rooted phone I couldn't resist experimenting, a lot. So I would flash this flash that, whatever I thought had a very small chance of working i flashed, lol. I usually would end up having to fireing up Odin and flashing the most important files on my PC, Partcyborg's awesome work, which I can flash with my eyes closed basically by now :laugh: Some things I would flash would just cause me to lose root though. It's driving me nuts not to be able to get it back without Odin. I could use Odin+Partcyborg's rom and have it back in 15 minutes, but I'm tired of being feed I'm ready to hunt, lol.
The thing is, I still have TWRP Safestrap custom recovery that I can access. I flash Supersu, it appears to flash fine but changes nothing, not even an SU icon in the app drawer. I did make SupoerSU Pro a system app a while ago, was that a mistake? I see it in the Apps list in Settings but I can't do much there except disable it and enable it (no it's not disabled,lol)
How can I get root back using custom recovery only? What should I have checked in Safestrap when flashing SuperSU?, Cache, System, Modem, etc? If anyone would care to explain some of the reasons I lose root but not custom recovery it would really calm my curiosity . I'm sure it would help a lot of other noobs also.
Boot animations is another thing that I find very interesting. Trying to change it has been the cause of at least 10 factory resets
I go to /system/media/ and swap out Booitanimation.zip, change the permission then I either get no change or I have reflash with Odin. What is all the files labeled Battery _000 Battery _001 Battery_002 all the way to Battery_100? Does the resolution need to be exactly the same as stock?
Is my rooted S8 not as rooted as other rooted phone? Lol, does that sentence make sense? Because of its locked bootloader and lack of custom roms is why I ask. Am I an idiot for buying a S9+ (G965U) since I love having root? I was hoping someone "cough...Part...cough cough...cyborg would be on it. If not though, no big deal. I do still have the S8 and still use it a lot even though it has no service, lol. Amazing phones not so amazing bootloaders though:laugh:
Thanks for reading. If you only skimmed it, thank you also. I know it's very long, lol. I just found something called a Combination Rom. Since I still have Safe-strap I'm gonna do what I usually do, flash it and ask questions later:laugh:
Click to expand...
Click to collapse
so the boot animations off top of my head are now located in something something and your carriers folder...The can be changed
Is it actually not rooted or is su just not responding
I have had it where the prompt never comes up and granting all just never works either normally a few reboots later it starts....
the custom rom thing is most def cause of locked boot-loader....
Up til boot-loader revision 2 is all we have root for and cannot be downgraded 3 and up....
I have myself tried flashing stock system img and then su and busy box from safe strap and up til now even this has been a no go...
Safe-strap is cool but basically No better than flashfire.IMO.
I am working with the possible bluetooth fix right now and have bricked and flashed 20 times over in the last 12 hours...
It actually is not rooted anymore after I flashed what claimed to be a boot animation for the G950U. If I open the SuperSU app it points me to a non-working site that has directions on "How to root". Plus all of the apps I have downloaded that require root all tell me I'm not rooted. Oddly enough though I was able to flash Xposed and had a green light once I opened it, (remember I still had SafeStrap recovery) it could only be accessed manually. I was shocked and yet even more confused, lol. I only tried out 2 modules before I reflashed Partcyborgs files again. Again, I was very confused as to why the modules actually worked but root only apps would start , only Xposed modules. I did only try 2 though AdBlocker Reborn and SpeedUp, both acted as if everything was normal . I wonder if it had something to do with making SuperSU a system app, which it no longer is since I reflashed with Odin.
Thanks for the info on the Bootanimation, but still I can't even delete the one I have now, for educational purposes only, Haha. It is a pretty freaking sweat bootanimtion Partcyborg included. I can't find it though T-Mobile (G950U) btw

Categories

Resources