i fleshed the nc2 kernel and now i'm trying to restore my phone back to nc4 since my phone wont boot. Does anyone know where i could download the nc4 kernel to flash with odin. Thank you
Paulrybicki83 said:
i fleshed the nc2 kernel and now i'm trying to restore my phone back to nc4 since my phone wont boot. Does anyone know where i could download the nc4 kernel to flash with odin. Thank you
Click to expand...
Click to collapse
I not sure if this will help but here is a link that may help you >>>>
http://forum.xda-developers.com/showthread.php?t=2787627. I am trying to flash nc2 trying to get out of nc4 in order to root, now im wondering if I should try it .
Paulrybicki83 said:
i fleshed the nc2 kernel and now i'm trying to restore my phone back to nc4 since my phone wont boot. Does anyone know where i could download the nc4 kernel to flash with odin. Thank you
Click to expand...
Click to collapse
Did you clear cache and dalvic when you flashed it? And have you tried clearing system, data, and cache and dalvic??
If anything make a backup with safestrap and restore original NC4 via odin http://forum.xda-developers.com/showthread.php?t=2524572
Also, what rom are you on? Some roms only support certain kernels/firmwares.
Related
I currently have a verizon note 3 sm-n900v andriod 4.42 baseband nc4 kernal 3.4 build nc4 and I have tried ever way possible to install a custom rom that has the bloatware removed. I have installed towelroot, installed safestrap many different versions with no luck. I have tried using the stock rom slot and get the error unable to mount system, good thing i created a backup which was able to be put back onto slot 1 and then rebooted and reinstalled back to factory with odin. My question is...is there a walkthru on exactly on doing the custom roms for nc4. The newest version 3.75 of safestrap doesnt seem to work with nc4 well either. Could someone tell me what versions of the kernals, and safestrap i should use so that i wont trip knox or brick the unit.
Install root done
Install busybox done
what should be next
install safestrap ..? What version for nc4
install a nc2 kernal...what one
I read the nc4/nc2 baseband kernal combo rom...and it says that it need the most current version of safestrap but you cant flash the stock rom on nc4 to get to that point...any help or walkthroughs would be very koool....IM SO TIRED OF VERIZON BLOAT WARE...
another thing is there a way to go back to a different modem driver...the baseband nc4 screwd the signals
nvosburg said:
I currently have a verizon note 3 sm-n900v andriod 4.42 baseband nc4 kernal 3.4 build nc4 and I have tried ever way possible to install a custom rom that has the bloatware removed. I have installed towelroot, installed safestrap many different versions with no luck. I have tried using the stock rom slot and get the error unable to mount system, good thing i created a backup which was able to be put back onto slot 1 and then rebooted and reinstalled back to factory with odin. My question is...is there a walkthru on exactly on doing the custom roms for nc4. The newest version 3.75 of safestrap doesnt seem to work with nc4 well either. Could someone tell me what versions of the kernals, and safestrap i should use so that i wont trip knox or brick the unit.
Install root done
Install busybox done
what should be next
install safestrap ..? What version for nc4
install a nc2 kernal...what one
I read the nc4/nc2 baseband kernal combo rom...and it says that it need the most current version of safestrap but you cant flash the stock rom on nc4 to get to that point...any help or walkthroughs would be very koool....IM SO TIRED OF VERIZON BLOAT WARE...
another thing is there a way to go back to a different modem driver...the baseband nc4 screwd the signals
Click to expand...
Click to collapse
See this post : http://forum.xda-developers.com/showpost.php?p=55003142&postcount=3
Safestrap is it. Most custom roms work better in the stock slot. Safestrap-HLTEVZW-NC2-3.75-B04.apk is the latest and maybe last version as Hashcode has gotten a gig and won't be supporting it but maybe an heir will rise.
If you just want root and debloat, you can also check this out and see if helps you :http://forum.xda-developers.com/showthread.php?t=2728533
thegamerdarkseid said:
See this post : http://forum.xda-developers.com/showpost.php?p=55003142&postcount=3
Safestrap is it. Most custom roms work better in the stock slot. Safestrap-HLTEVZW-NC2-3.75-B04.apk is the latest and maybe last version as Hashcode has gotten a gig and won't be supporting it but maybe an heir will rise.
If you just want root and debloat, you can also check this out and see if helps you :http://forum.xda-developers.com/showthread.php?t=2728533
Click to expand...
Click to collapse
Yah but nc2 3.75 wont run right on nc4. It doesnt let you write the system. Do you have to flash the kernal to nc2 prior to installing the 3.75. Because in the write up it says to http://forum.xda-developers.com/showthread.php?t=2787627
Coming From Stock NC4 OTA
Step- 1 - Root Device with TowelRoot Here
Step- 2 - Install Busybox from play store and install busybox itself
Step- 3 - Install Hashcodes Latest Safestrap Here
Step- 4 - Boot into Safestrap Select Stock Slot
Step- 5 - Wipe Data Factory Reset The Stock Slot
Step- 6 - Flash nc4 deodex rom to the stock slot
Step- 7 - Reboot into Download mode From Safestrap
Step- 8 - Flash NC2 Kernel Package Here
Step- 9 - You will Boot into a Stock Deodex rom with Root, Busybox, Init.d, Selinux Permissive, Insecure Modules!!
my issue is that if i have nc4 baseband do i put on nc2 kernal before or after safestrap...and do you use odin to flash it or safestrap in download mode?
Thank so much for responding im reading those links as well )
nvosburg said:
Yah but nc2 3.75 wont run right on nc4. It doesnt let you write the system. Do you have to flash the kernal to nc2 prior to installing the 3.75. Because in the write up it says to http://forum.xda-developers.com/showthread.php?t=2787627
Coming From Stock NC4 OTA
Step- 1 - Root Device with TowelRoot Here
Step- 2 - Install Busybox from play store and install busybox itself
Step- 3 - Install Hashcodes Latest Safestrap Here
Step- 4 - Boot into Safestrap Select Stock Slot
Step- 5 - Wipe Data Factory Reset The Stock Slot
Step- 6 - Flash nc4 deodex rom to the stock slot
Step- 7 - Reboot into Download mode From Safestrap
Step- 8 - Flash NC2 Kernel Package Here
Step- 9 - You will Boot into a Stock Deodex rom with Root, Busybox, Init.d, Selinux Permissive, Insecure Modules!!
my issue is that if i have nc4 baseband do i put on nc2 kernal before or after safestrap...and do you use odin to flash it or safestrap in download mode?
Thank so much for responding im reading those links as well )
Click to expand...
Click to collapse
Okay, we'll have to figure out what the problem might be because there are tons of people on NC4 running that version of safestrap. It's definately not that version of safestrap, let me look and see what I can find.
Just to make sure you're on B04 and not B03?
thegamerdarkseid said:
Okay, we'll have to figure out what the problem might be because there are tons of people on NC4 running that version of safestrap. It's definately not that version of safestrap, let me look and see what I can find.
Click to expand...
Click to collapse
The error that i get is unable to mount/wite system and systemorig when trying to replace the stock rom. and when i try slot 1 or any of the rest with nc4 base and nc4 kernal i get an installed fine...but then it wont boot to it it just goes black
nvosburg said:
The error that i get is unable to mount/wite system and systemorig when trying to replace the stock rom. and when i try slot 1 or any of the rest with nc4 base and nc4 kernal i get an installed fine...but then it wont boot to it it just goes black
Click to expand...
Click to collapse
Did you flash the NC2 kernel in Odin with your phone in download mode? Most roms won't boot without it.
Edit: Is this the error you're getting? .... http://forum.xda-developers.com/showpost.php?p=54089616&postcount=1502
Okay let's see if we can get you booted and try to figure out that stock slot as once you get running most roms run better in the stock slot.
thegamerdarkseid said:
Did you flash the NC2 kernel in Odin with your phone in download mode? Most roms won't boot without it.
Edit: Is this the error you're getting? .... http://forum.xda-developers.com/showpost.php?p=54089616&postcount=1502
It was fixed in safestrap b04 that's why I'm asking if you have that version and not b03.
Click to expand...
Click to collapse
That was my question
Do i have to run the nc2 kernal on the nc4 baseband...and do i flash the nc2 kernal before or after I install root busybox safestrap install rom.
I had never installed nc2...so nc2 kernal is required and nc4 kernal will not work..? Or will nc4 work if i use b04. and just to rehash you can install nc2 kernal on a nc4 baseband correct? Also if I do either of those...am i still stuck with the nc4 modem that has the horrible signal or is there a way to fix that with a different modem.
Sorry im kind of all over the place...i really appreciate your help
I have installed
Stock nc4
Root
Busybox
safestrapb04
It boots to the custom where i can choose the slots or stock rom
I have not installed nc2 kernal via download mode yet...does that need to be done before i install a rom?
Sorry i tried to clean up the post so im not jumping all around.
nvosburg said:
That was my question
Do i have to run the nc2 kernal on the nc4 baseband...and do i flash the nc2 kernal before or after I install root busybox safestrap install rom.
I had never installed nc2...so nc2 kernal is required and nc4 kernal will not work..? Or will nc4 work if i use b04. and just to rehash you can install nc2 kernal on a nc4 baseband correct? Also if I do either of those...am i still stuck with the nc4 modem that has the horrible signal or is there a way to fix that with a different modem.
Sorry im kind of all over the place...i really appreciate your help
Click to expand...
Click to collapse
Flash the kernel after the rom is flashed. In safestrap after flashing rom reboot to download mode and flash the the NC2 kernel. It'll work with every rom except Jamine 2.3 I believe.
If the NC4 modem is bad for you can flash a different modem in Odin, just make sure you phone is in download mode again : http://forum.xda-developers.com/showpost.php?p=47400062&postcount=1
thegamerdarkseid said:
Flash the kernel after the rom is flashed. In safestrap after flashing rom reboot to download mode and flash the the NC2 kernel. It'll work with every rom except Jamine 2.3 I believe.
If the NC4 modem is bad for you can flash a different modem in Odin, just make sure you phone is in download mode again : http://forum.xda-developers.com/showpost.php?p=47400062&postcount=1
Click to expand...
Click to collapse
Ok so thats my issue...it wont let me install the Rom in either slots or stock...in the stock slot is says failed...and in slot 1 it says success but then goes to a blank screen upon reboot...I guess i will install on slot 1 and then go to download mode and install the nc2 kernal. Does it matter what modem i choose...can i choose the nc2 modem running the nc2 firmaware on a nc4 bootloader? Also if i have a stock/ota nc4 baseband/bootloader does it matter if i choose retail or odin modems
nvosburg said:
Ok so thats my issue...it wont let me install the Rom in either slots or stock...in the stock slot is says failed...and in slot 1 it says success but then goes to a blank screen upon reboot...I guess i will install on slot 1 and then go to download mode and install the nc2 kernal. Does it matter what modem i choose...can i choose the nc2 modem running the nc2 firmaware on a nc4 bootloader? Also if i have a stock/ota nc4 baseband/bootloader does it matter if i choose retail or odin modems
Click to expand...
Click to collapse
You can run whatever modem, it all depend on your location. I'm on NC2 leak with the NC4 modem as for me NC2 was terrible. Some people are on NC4 with the MJE modem. I wouldn't just jump from modem to modem. Give it at least a day of use before you decide to change. But most people are running MJE, NC2 or NC4.
thegamerdarkseid said:
You can run whatever modem, it all depend on your location. I'm on NC2 leak with the NC4 modem as for me NC2 was terrible. Some people are on NC4 with the MJE modem. I wouldn't just jump from modem to modem. Give it at least a day of use before you decide to change. But most people are running MJE, NC2 or NC4.
Click to expand...
Click to collapse
Ok i think i got this...so if im ota nc4
what is the difference between the flashable modems and the full stock tars...??
Odin Flashable Modems:
MI9 Modem: http://www.androidfilehost.com/?fid=23212708291676781
MJ7 Modem: http://www.androidfilehost.com/?fid=23212708291676782
MJE Modem: http://www.androidfilehost.com/?fid=23252070760975517
NC2 Modem: http://www.androidfilehost.com/?fid=23329332407589749
NC4 Modem: http://www.androidfilehost.com/?fid=23501681358549616
RETAIL ONLY Odin Flashable Stock Tars:
MI9 Full Stock Tar: http://www.androidfilehost.com/?fid=23212708291674887
MJ7 Full Stock Tar: http://www.androidfilehost.com/?fid=23212708291674903
MJE Full Stock Tar: http://www.androidfilehost.com/?fid=23269279319196106
NC4 Full Stock Tar: http://www.androidfilehost.com/?fid=23501681358549642
Thanks so much for clearing up my questions
nvosburg said:
Ok i think i got this...so if im ota nc4
what is the difference between the flashable modems and the full stock tars...??
Odin Flashable Modems:
MI9 Modem: http://www.androidfilehost.com/?fid=23212708291676781
MJ7 Modem: http://www.androidfilehost.com/?fid=23212708291676782
MJE Modem: http://www.androidfilehost.com/?fid=23252070760975517
NC2 Modem: http://www.androidfilehost.com/?fid=23329332407589749
NC4 Modem: http://www.androidfilehost.com/?fid=23501681358549616
RETAIL ONLY Odin Flashable Stock Tars:
MI9 Full Stock Tar: http://www.androidfilehost.com/?fid=23212708291674887
MJ7 Full Stock Tar: http://www.androidfilehost.com/?fid=23212708291674903
MJE Full Stock Tar: http://www.androidfilehost.com/?fid=23269279319196106
NC4 Full Stock Tar: http://www.androidfilehost.com/?fid=23501681358549642
Thanks so much for clearing up my questions
Click to expand...
Click to collapse
If you took the NC4 ota you can only use the NC4 tar to return your phone to stock. Those who took the NC2 leak and actually downgrade all the way back to 4.3 Jellybean for return purposes.
The modems are from lowest to highest. When it comes to the modems I'd only use MJE - The last jellybean modem, NC2 - the leak modem, NC4 modem the most current.
Is there a way to get the stock recovery back onto the SM-N900V? I tried putting CWM and TWRP custom recoveries on there before I knew it the phone had a locked bootloader. Where can I find the correctly signed stock recovery?
Also, how can I unset the "warranty bit"?
I think you just have to Odin the stock tar . If you were on the leak NC2 you can Odin that or the latest NC4. If your were on NC4 you have to Odin the NC4 tar. They are both found in the android dev section under Bean's firmware thread.
mjh68 said:
I think you just have to Odin the stock tar . If you were on the leak NC2 you can Odin that or the latest NC4. If your were on NC4 you have to Odin the NC4 tar. They are both found in the android dev section under Bean's firmware thread.
Click to expand...
Click to collapse
Thanks, I was hoping the stock tar was all I needed to do. I was afraid that I'd end up flashing a ROM that I could not boot because I had cache that I could not clear. You are sure that will reset the recovery?
danthingo said:
Thanks, I was hoping the stock tar was all I needed to do. I was afraid that I'd end up flashing a ROM that I could not boot because I had cache that I could not clear. You are sure that will reset the recovery?
Click to expand...
Click to collapse
Yes , if it's the full stock tar it will replace the recovery as well.
danthingo said:
Thanks, I was hoping the stock tar was all I needed to do. I was afraid that I'd end up flashing a ROM that I could not boot because I had cache that I could not clear. You are sure that will reset the recovery?
Click to expand...
Click to collapse
But nothing will reset the knox warranty bit. It is literally an electronic fuse...once blown. ..only replacing the whole motherboard will reset it.
Sent from my Note 3 via Tapatalk
Im trying to go back to stock.. im using odin 3.09 and ive flashed \I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5
I had twrp installed and Slimkat which i used for over 6 months.. I forgot that i updated to the latest radio .. NI1 I believe.. would ths make the phone hang and sit at the att screen?
If this is why im having issues.. what can i do?
Flash NB1 first and then flash back to MDL if you want. Tell me if it worked
moiramd said:
Flash NB1 first and then flash back to MDL if you want. Tell me if it worked
Click to expand...
Click to collapse
On a SGH-1337? Will NB1 lock my bootloader? I dont see NB1 on sammobile.
http://forum.xda-developers.com/showthread.php?t=2616221 use this thread yes it will lock your bootloader. In the thread is all things you need
cmdba said:
On a SGH-1337? Will NB1 lock my bootloader? I dont see NB1 on sammobile.
Click to expand...
Click to collapse
Do NOT flash NB1. KEEP MDL. NB1 WILL LOCK YOU FROM SLIMKAT AND ANYTHING.
Make sure you wiped data in recovery before you tried booting. The modem would mess it up but it should have been flashed over with the full tar. Just try wiping in the stock recovery first.
Sent from my SGH-I337
DeadlySin9 said:
Do NOT flash NB1. KEEP MDL. NB1 WILL LOCK YOU FROM SLIMKAT AND ANYTHING.
Make sure you wiped data in recovery before you tried booting. The modem would mess it up but it should have been flashed over with the full tar. Just try wiping in the stock recovery first.
Sent from my SGH-I337
Click to expand...
Click to collapse
Yeah im good to go now.. back on MDL. Thanks
Im sending my phone ot for service because of the camera failed error.
i was originally rooted on 4.4.4 NI2.
Unrooted, uninstalled safestrap and busybox and did a factory reset.
Now i have the flash counter lockpad on boot screen so i need to reroot to remove it.
Tried flashing NCG stock but when i flash it in odin, the screen stays black and never boots up.
Im forced to flash either NI2 or NK2 which both work, just getting back to NCG to reroot doesnt work
Any ideas?
FingerBlastJ said:
Im sending my phone ot for service because of the camera failed error.
i was originally rooted on 4.4.4 NI2.
Unrooted, uninstalled safestrap and busybox and did a factory reset.
Now i have the flash counter lockpad on boot screen so i need to reroot to remove it.
Tried flashing NCG stock but when i flash it in odin, the screen stays black and never boots up.
Im forced to flash either NI2 or NK2 which both work, just getting back to NCG to reroot doesnt work
Any ideas?
Click to expand...
Click to collapse
You can't flash back to NCG from NI2. The best bet is to reroot by flashing the NCG kernel only on clean NI2 and running towelroot. Then reflash the NI2 kernel back. Do your cleanup and then unroot again.
terrigan said:
You can't flash back to NCG from NI2. The best bet is to reroot by flashing the NCG kernel only on clean NI2 and running towelroot. Then reflash the NI2 kernel back. Do your cleanup and then unroot again.
Click to expand...
Click to collapse
x2. You can't do a full flash back, but if you flash the kernel you should still be able to. Follow @Misterxtc's step by step guide here...
ok let me make sure im doing this right
Flash NI2 firmware
Then Flash NCG Kernel ONLY?
FingerBlastJ said:
ok let me make sure im doing this right
Flash NI2 firmware
Then Flash NCG Kernel ONLY?
Click to expand...
Click to collapse
Negative
Flash from Factory Reset.... you should just have to flash NCG kernel, root, re-flash NK2 kernel....
kprice8 said:
Negative
Flash from Factory Reset.... you should just have to flash NCG kernel, root, re-flash NK2 kernel....
Click to expand...
Click to collapse
ok so heres what worked
Flashing ALL VZW NCG tar file was the only thing to get me back on ncg
Kernel ONLY or firmware do not work you get stuck on black boot screen
Thanks for your help, much appreciated!
Can someone please tell me how to do this? I've read several different methods and im just not getting it. i know i gotta use odin, but i have to go back to stock? im already rooted and have twrp. thanks for any help.
andypiznti said:
Can someone please tell me how to do this? I've read several different methods and im just not getting it. i know i gotta use odin, but i have to go back to stock? im already rooted and have twrp. thanks for any help.
Click to expand...
Click to collapse
Download the NG2 tar from Sammobile or from another source. Put the phone in download mode and put the tar in the correct spot and Odin the phone . its quite simple. Just a heads up back up anything on your internal memory as you may have to perform a factory reset to get the phone not boot up.
daniel4653 said:
Download the NG2 tar from Sammobile or from another source. Put the phone in download mode and put the tar in the correct spot and Odin the phone . its quite simple. Just a heads up back up anything on your internal memory as you may have to perform a factory reset to get the phone not boot up.
Click to expand...
Click to collapse
so i got the tar from [ROM][NG2] Stock Rooted NG2 | Stock Rooted NG2 Refitted | Mostly Stock NG2 v1.3. im going to odin the tar, then reset into recovery, then flash say sacs v4 ng2 rom, restart? i actually found the post where you posted for sammoblie but i didnt want to sign up for it.
I just did it but it still says im on mf9. i noticed on my phone it said write protection was on?
andypiznti said:
so i got the tar from [ROM][NG2] Stock Rooted NG2 | Stock Rooted NG2 Refitted | Mostly Stock NG2 v1.3. im going to odin the tar, then reset into recovery, then flash say sacs v4 ng2 rom, restart? i actually found the post where you posted for sammoblie but i didnt want to sign up for it.
I just did it but it still says im on mf9. i noticed on my phone it said write protection was on?
Click to expand...
Click to collapse
That thread only had a tar for the modem and not the software.
To download the tar you do not need to he signed up.
daniel4653 said:
That thread only had a tar for the modem and not the software.
To download the tar you do not need to he signed up.
Click to expand...
Click to collapse
Man there was nothing easy about that. i had to odin the ng2, reboot, then odin ng2 again. now its working, but now im getting a write access denied on my internal storage??
nvm, used foldermount to fix the issue.