Database Users

nexus 7 stuck on android is upgrading

i have a nexus thats completely stock( out of the box) worked fine for about a month, let the tablet die and has been unplugged for about a week. got it charged up and and would not turn on. using the nexus root toolkit i was able to get to turn on. unlocked the device( unlock logo below google icon on startup) was unable to get past that point. now finally i can get past the nexus boot logo but it gets stuck on aindroid is upgrading " optimizing app 1 of 11" i cant root using the root tool kit bc when i unlocked device it got rid of developer options ( by what the msg said before i unlocked). im simply trying to get my device to turn back on. i dont plan to root or install a rom, im fine with the stock rom. i just want to damn device to turn back on. when i was able to power on the device when i first got it i did upgrade to the newest jelly bean rom. any one can help me on this issue ??
thanks

Boot into temporary custom recovery using Nexus root toolkit(Advance menu). Now wipe cash and devlock than try rebooting into system. If it doesn't work you can try factory reset. Last but not the least will be Flash Stock + Unroot(Soft brick/boot loop).

ok i wiped cache and devlock was able to to pass the nexus logo into what looks like another android is upgrading screen it got up to 14 of 20 and froze. between my 1st post and yours i was able to get android to fully run. did all the 1st time setup but after about a couple screen taps the device kept freezing and coming up with crash reports. there were a few times that the stock launcher even forced close. after a couple of restarts it finally quit again and would not even pass the nexus logo. ill try to do the other options that u stated in your post. any other thoughts ?

dac2009 said:
ok i wiped cache and devlock was able to to pass the nexus logo into what looks like another android is upgrading screen it got up to 14 of 20 and froze. between my 1st post and yours i was able to get android to fully run. did all the 1st time setup but after about a couple screen taps the device kept freezing and coming up with crash reports. there were a few times that the stock launcher even forced close. after a couple of restarts it finally quit again and would not even pass the nexus logo. ill try to do the other options that u stated in your post. any other thoughts ?
Click to expand...
Click to collapse
If the factory reset doesn't work just go for the Flash. I don't think you are much worried about the data so it's not a big deal for you. and I'm quit sure this is gonna work. Best of luck.

ok did that. went smooth but then once again it just gets stuck at the nexus logo. waited for over 10 mins like the notes say after re flashing and nothing. so i did a restart this time it passed the nexus logo, went to android is upgrading optimizing app and gets stuck at 4 of 11. being that this is pure android are there custom roms out there that i could try to flash via odin. ive rooted and installed roms before on my other android devices no problem but they were never pure google. am i missing something here. also what would cause a brand new nexus 7 just to go "ape ****" on its self.

dac2009 said:
ok did that. went smooth but then once again it just gets stuck at the nexus logo. waited for over 10 mins like the notes say after re flashing and nothing. so i did a restart this time it passed the nexus logo, went to android is upgrading optimizing app and gets stuck at 4 of 11. being that this is pure android are there custom roms out there that i could try to flash via odin. ive rooted and installed roms before on my other android devices no problem but they were never pure google. am i missing something here. also what would cause a brand new nexus 7 just to go "ape ****" on its self.
Click to expand...
Click to collapse
Okay, that's weird!!!
Are you using Nexus Root Toolkit?? If yes are you using pre-downloaded android??
Try Automatically download + Extract.....
Last of all I'm really confused how there could be a problem when you got a fresh OS and Stock.
I agree with the messing thing that you told... Try checking and double checking everything... Check if you have selected the correct device or not.
And do a full wipe(including system) using TWRP before flashing again.
Edit: Make sure you are using the latest toolkit. You can get it from the link bellow.
http://forum.xda-developers.com/showthread.php?t=1766475

Try flash stock image throught toolkit.

i have the most current root toolkit. i installed the rom that was available to download via the app which was android 4.2.2 jdq39

dac2009 said:
i have the most current root toolkit. i installed the rom that was available to download via the app which was android 4.2.2 jdq39
Click to expand...
Click to collapse
I don't see a way how the problem still exists... :S
Whatever the problem is it's seems to be with android OS. But how it exists in completely new android. Sorry can't find a reason behind the problem. You can still try flashing any older android (like 4.1.2).

ok i got a zip of stock 4.1.2 and using the root tool kit i can install a zip via the twrp but it wont let me bc it says adb device not found and that developer options need to be turned on. im un able to turn it on bc i cant even get into the rom on the device.
thanks

ok i got it working. i was able to flash the older rom to my device and its working so far. no force closes yet.
thanks for everyone's help

ok im about to throw this tablet out the window. was messing around with the tablet and it auto installed ( well at least tried to) the 4.2 update. it downloaded the update went to install and now im stuck at this screen(check pic) and cant even get it into recovery mode. im at the point now to cut my loss and say the hell with it. anyone else have any ideas on whats my next step. the thing that wireds me out is of the roms ive been able to use it all works great for only about 5 mins. it seems like the more i touch the screen to do anything it will freeze on me(it will do it after 5 mins or so after a restart). https://www.dropbox.com/s/arnauysa4oglp5b/2013-05-21%2018.37.24.jpg

dac2009 said:
ok im about to throw this tablet out the window. was messing around with the tablet and it auto installed ( well at least tried to) the 4.2 update. it downloaded the update went to install and now im stuck at this screen(check pic) and cant even get it into recovery mode. im at the point now to cut my loss and say the hell with it. anyone else have any ideas on whats my next step. the thing that wireds me out is of the roms ive been able to use it all works great for only about 5 mins. it seems like the more i touch the screen to do anything it will freeze on me(it will do it after 5 mins or so after a restart). https://www.dropbox.com/s/arnauysa4oglp5b/2013-05-21 18.37.24.jpg
Click to expand...
Click to collapse
I can't just think of anything else. Just telling you the things that I'd have done if I were you.
* reinstall boot
* change kernel
* turn off the auto update of android.
* try some costume room.
Don't throw it out the window you call always donate it to me if you really wanna throw it or make a drop test video...
Last of all just don't lose hope keep trying. you'll find out something surely and share it with us.
Sent from my Nexus 7 using XDA Premium HD app

Daft question, but the few times you managed to get it running, was your Wifi on?
Sent from my GT-I9300 using xda app-developers app

yes my wifi was on and was able to stream . spotify among other things

Not the exact same situation, but I found certain Wifi router's would trip my nexus into reboots until I rooted
Sent from my GT-I9300 using xda app-developers app

Phone is stuck in "Android is upgrading. Optimizing application 1 of 1" HELP!!!!!!!!!
hey guys, my phone is stuck in "Android is upgrading. Optimizing application 1 of 1"
and all I can do is
1. apply sdcard/update.zip
2. reboot system now ( does NOT work coz it brings me back to optimizing apps )
3. apply update from external storage
4. wipe data / factory reset
5. wipe cache partition
6. apply update from cache
is there a way i can backup first all my files before factory resetting my phone (if thats the only option i have)????
help me please

[Q] Nexus 7 wifi

Im new to Android world, so please help me.
Now, my Nexus 7 Wifi is now unlocked and rooted by your tutorial, and
flashed Xenon HD Custom Rom.
I was in Jelly Bean 4.2.2 before. And i found some site that says
XenonHD is updated to 4.2.2 version, so i try to get it, and installed it to
my device. But after evrything done, i checked my device's version and it
says 4.2.1, but im sure i downloaded the right one, dated April 2013, as
far as i know. So, my device was downgraded to 4.2.1
Question:
a) Is it just that easy for downgrading an Android device? Because on
iOS, there are lots of concerns first before you can actually do
downgrading..
b) After installing apps, i made a backup with Nexus Root Toolkit, and
after the backup process, it reboots, and i notice that something is
wrong, the X animation logo goes somewhere at the lower right, and
when it goes to lockscreen, since im locked on landscape orientation,
half right side shows first then the half left side, youll really say that, it is
not okay. I tried rebooting by XenonHD settings, i tried to turn off and turn
it on again, same thing happens, what should i do?
c) About XenonHD, is it just one theme available? or i can download more
themes elsewhere? can somebody point me to where can i do that?
d) should i be re-flashing for XenonHD 4.2.2? How would i do that?
e) And what more can i do to my device to achieve it AWESOMENESS
Thanks in advance..

a) Yes, on many android devices it's that easy to downgrade. You don't need to jump through all the hoops like iOS requires you to.
b) Sounds like something may have gone wrong during the install process. Perhaps you could post a picture of what it looks like.
c) not sure, never used it.
d) Guess that's up to you. If it's an upgrade then it could fix the screen issue you're having. You'd flash it the same way you flashed the 4.2.1 version.

I'm sorry for spoonfeeding.
zeneleven said:
a) Is it just that easy for downgrading an Android device? Because on
iOS, there are lots of concerns first before you can actually do
downgrading..
Click to expand...
Click to collapse
Yes. XenonHD says it's 4.2.2 though, so I'm pretty sure you flashed an old build or the dev forgot to edit some text to make it say 4.2.2.
zeneleven said:
b) After installing apps, i made a backup with Nexus Root Toolkit, and
after the backup process, it reboots, and i notice that something is
wrong, the X animation logo goes somewhere at the lower right, and
when it goes to lockscreen, since im locked on landscape orientation,
half right side shows first then the half left side, youll really say that, it is
not okay. I tried rebooting by XenonHD settings, i tried to turn off and turn
it on again, same thing happens, what should i do?
Click to expand...
Click to collapse
Flash a different ROM or reflash your current one. Backups shouldn't have any effect on the ROM; if the backup app you're using negatively impacts your experience, switch it (I use titanium backup). TWRP recovery also supports nandroid backups.
zeneleven said:
c) About XenonHD, is it just one theme available? or i can download more
themes elsewhere? can somebody point me to where can i do that?
Click to expand...
Click to collapse
From the ROM thread, it says it supports CM10.1 themes (theme chooser). Search "CM10 themes" on Google Play to find them, then go to your settings to apply.
zeneleven said:
d) should i be re-flashing for XenonHD 4.2.2? How would i do that?
Click to expand...
Click to collapse
First, download the ROM to your device (if you haven't already), and google apps.
Make a backup of your data (nandroid or Titanium backup or some other backup app).
Then hold the power button, and select either "reboot"/"restart" or "recovery".
If you select "reboot" and no option for "recovery" comes up, hold down the volume down key while the device is restarting, then navigate using the volume buttons once the bootloader pops up, to the "recovery" tab.
Verify that the recovery installed is indeed TWRP (TeamWin recovery). If it isn't stop, and get TWRP before continuing.
Once your recovery pops up, select "factory reset", and swipe.
Then, select "install" from the menu that pops up, navigate to the folder labeled "downloads" and select the ROM file, and then select "add more zips", then select the gapps (google apps) file.
After that, swipe the little bar to start flashing, then after it's finished, select "reboot system".
Once the thing has properly booted into the setup screen, set it up, and restore your data.
zeneleven said:
e) And what more can i do to my device to achieve it AWESOMENESS
Click to expand...
Click to collapse
Install M-Kernel and Trickster Mod (app).
Install Nova launcher.
Install fdroid (for freedoms).
Install MX Player.

Ive already re-flashed with XenonHD's latest update i think, and yeah its on 4.2.2. and still, got the lockscreen problem which i solved by changing the lockscreen orientation, locking it to portrait.. and got more error like "Apollo" and its launcher "has stopped" something.. and the voice dictation, exits when being used, wherever im in..
Now, im planning to switch to Cyanogenmod for 4.2.2, since it has few themes available.
About Kernel? Can someone help me how to do that? a great guide will be greatly appreciated, done searching and cant find it, i swear.
Thank you so much in advance

HELP! Odin and Heimdall won't work... Alternative to flash to stock?

First, let me get the formalities out of the way... long time lurker, first time poster. I hope you guys can help me out!
My GS4 semi-bricked while trying to restore my phone from LiquidSmooth ROM . My phone had no MAC address nor IP address after I flashed to LiquidSmooth, so I figured I needed to restore files I may have accidentally deleted.. The phone became stuck on the splash screen so I tried pulling the battery, going into recovery, and clearing cache/dalvik. No luck.
So then I tried to restore using a backup that I had made before flashing, but then it got stuck on the AT&T screen. Tried to clear cache/dalvik, but it didn't work. I thought maybe the back up didn't work because I was flashed into a different ROM, so I downloaded this stock rom by scrosier, and tried again... but to no avail.
Now I want to try flashing the phone back to stock, but I have a early 2008 MacBook running 10.7.5 (Lion). Odin is windows only, and Heimdall doesn't work on my version of OS X (keeps crashing the moment I open it). I thought maybe updating my MacBook to Mountain Lion (10.8) might work, but Mountain Lion is not supported on my Macbook, thus cannot update OS X... and I don't have access to a PC at this moment either.
Is my only option to go out and buy windows and install on bootcamp? Does anyone know if I could flash my phone back to stock using the computer I have now?
Sorry if my post didn't make any sense. I'm in a hurry and I want to fix my phone already! Thanks in advance
EDIT:
I have TWRP 2.5.0.3 on my phone

sebbo1 said:
First, let me get the formalities out of the way... long time lurker, first time poster. I hope you guys can help me out!
My GS4 semi-bricked while trying to restore my phone from LiquidSmooth ROM . My phone had no MAC address nor IP address after I flashed to LiquidSmooth, so I figured I needed to restore files I may have accidentally deleted.. The phone became stuck on the splash screen so I tried pulling the battery, going into recovery, and clearing cache/dalvik. No luck.
So then I tried to restore using a backup that I had made before flashing, but then it got stuck on the AT&T screen. Tried to clear cache/dalvik, but it didn't work. I thought maybe the back up didn't work because I was flashed into a different ROM, so I downloaded this stock rom by scrosier, and tried again... but to no avail.
Now I want to try flashing the phone back to stock, but I have a early 2008 MacBook running 10.7.5 (Lion). Odin is windows only, and Heimdall doesn't work on my version of OS X (keeps crashing the moment I open it). I thought maybe updating my MacBook to Mountain Lion (10.8) might work, but Mountain Lion is not supported on my Macbook, thus cannot update OS X... and I don't have access to a PC at this moment either.
Is my only option to go out and buy windows and install on bootcamp? Does anyone know if I could flash my phone back to stock using the computer I have now?
Sorry if my post didn't make any sense. I'm in a hurry and I want to fix my phone already! Thanks in advance
Click to expand...
Click to collapse
If you are able to access recovery then do this:
Put Liquid Smooth and its gapps on the external card using a card reader
Go into recovery, factory reset, wipe both caches, format /system, flash the rom and gapps, reboot

Colonel Sanders said:
If you are able to access recovery then do this:
Put Liquid Smooth and its gapps on the external card using a card reader
Go into recovery, factory reset, wipe both caches, format /system, flash the rom and gapps, reboot
Click to expand...
Click to collapse
I actually tried to reflash Liquid Smooth and wiped cache / factory reset, but once it reboots, a screen pops up that says "Android is updating" and updates 120 files. However, when it finishes, it gives me an error along the lines of "Unfortunately... something something," and instantly reboots. Then it hangs on the Liquid Smooth splash screen. Couldn't get a good look at what the message said because it happens so quickly.

sebbo1 said:
I actually tried to reflash Liquid Smooth and wiped cache / factory reset, but once it reboots, a screen pops up that says "Android is updating" and updates 120 files. However, when it finishes, it gives me an error along the lines of "Unfortunately... something something," and instantly reboots. Then it hangs on the Liquid Smooth splash screen. Couldn't get a good look at what the message said because it happens so quickly.
Click to expand...
Click to collapse
Then I suggest you flash a different ROM. Try out Slim. Liquid Smooth is just a Slim ripoff.
Put Slim and the Addons on the SD, and flash it like you would when changing ROMs. A clean wipe.

Colonel Sanders said:
Then I suggest you flash a different ROM. Try out Slim. Liquid Smooth is just a Slim ripoff.
Put Slim and the Addons on the SD, and flash it like you would when changing ROMs. A clean wipe.
Click to expand...
Click to collapse
I'll give that a shot. Do you recommend the new 4.3 Google Edition Slim Rom?

sebbo1 said:
I'll give that a shot. Do you recommend the new 4.3 Google Edition Slim Rom?
Click to expand...
Click to collapse
That's not Slim, he just put Slim because it's slimmed down. I haven't personally tried it. I'm a tester for SlimRoms, so thats all I ever run. Test builds. It does look nice though, but it won't have near the customization of Slim.

Colonel Sanders said:
That's not Slim, he just put Slim because it's slimmed down. I haven't personally tried it. I'm a tester for SlimRoms, so thats all I ever run. Test builds. It does look nice though, but it won't have near the customization of Slim.
Click to expand...
Click to collapse
Are you talking about slimroms.net? If you are, which addons do I download?
EDIT: nevermind. I downloaded the AIO (all in one)

sebbo1 said:
Are you talking about slimroms.net? If you are, which addons do I download?
Click to expand...
Click to collapse
Yes, slimroms.net
It just depends on whether or not you want all of the Google apps typically in a regular gapps pkg, or a stripped down version. I use the AIO_Addons, or you could get the Aroma, so you can pick and choose. The Slim_gapps is a stripped down version.

Colonel Sanders said:
Yes, slimroms.net
It just depends on whether or not you want all of the Google apps typically in a regular gapps pkg, or a stripped down version. I use the AIO_Addons, or you could get the Aroma, so you can pick and choose. The Slim_gapps is a stripped down version.
Click to expand...
Click to collapse
One last question before I flash the rom. Is it loki'd? I don't see the answer on the website

sebbo1 said:
One last question before I flash the rom. Is it loki'd? I don't see the answer on the website
Click to expand...
Click to collapse
Last time I flashed a weekly, it wasn't loki'd, but that was a while back. I'm running test builds from black_jck, and build my own sometimes. I mentioned it to him that the weekly wasn't loki'd but that was a while back, so I can't speak for them now. The official builds are. If you're going to flash the weekly, flash loki_doki just to be safe.

Colonel Sanders said:
Last time I flashed a weekly, it wasn't loki'd, but that was a while back. I'm running test builds from black_jck, and build my own sometimes. I mentioned it to him that the weekly wasn't loki'd but that was a while back, so I can't speak for them now. The official builds are. If you're going to flash the weekly, flash loki_doki just to be safe.
Click to expand...
Click to collapse
Alright, so I flashed Slim and the AIO_addons, and rebooted the phone.
Once it was rebooting, the screen i mentioned earlier popped up, that said "Android is updating" and went through 109 files. When it was done, an error popped up quickly, saying that "Unfortunately..." and I couldn't read the rest before the phone rebooted. I let the screen hang for about 10 minutes, pulled the battery, cleared cache and dalvik, and rebooted again. No luck.
I think my best option now would be to return to stock, but I can't using my macbook. So my original question still stands.. How can I return to stock without using Odin and Heimdall?

sebbo1 said:
Alright, so I flashed Slim and the AIO_addons, and rebooted the phone.
Once it was rebooting, the screen i mentioned earlier popped up, that said "Android is updating" and went through 109 files. When it was done, an error popped up quickly, saying that "Unfortunately..." and I couldn't read the rest before the phone rebooted. I let the screen hang for about 10 minutes, pulled the battery, cleared cache and dalvik, and rebooted again. No luck.
I think my best option now would be to return to stock, but I can't using my macbook. So my original question still stands.. How can I return to stock without using Odin and Heimdall?
Click to expand...
Click to collapse
I would say so myself, Odin back to stock, but since you have a mac and I'm not sure if Heimdall support the S4 try this:
Factory Reset
Wipe Cache
Wipe Dalvik
Format /system
Format /data
Format /internal (If CWM-based recovery)
Flash ROM, addons, reboot

sebbo1 said:
Alright, so I flashed Slim and the AIO_addons, and rebooted the phone.
Once it was rebooting, the screen i mentioned earlier popped up, that said "Android is updating" and went through 109 files. When it was done, an error popped up quickly, saying that "Unfortunately..." and I couldn't read the rest before the phone rebooted. I let the screen hang for about 10 minutes, pulled the battery, cleared cache and dalvik, and rebooted again. No luck.
I think my best option now would be to return to stock, but I can't using my macbook. So my original question still stands.. How can I return to stock without using Odin and Heimdall?
Click to expand...
Click to collapse
I forgot to mention, the red LED light flashes every once in a while while on the Slim screen

sebbo1 said:
I forgot to mention, the red LED light flashes every once in a while while on the Slim screen
Click to expand...
Click to collapse
That means the battery is low... Charge it up some... Check your PM for my gmail if you need some help, posting back and forth can take a while.

Well thanks for all your help! Happy that my phone is working again without having to flash to stock.
Phone booted normally once I switched to SlimBean. Much snappier and responsive than LiquidSmooth. Fixed the problems I was having with WiFi also.
Still haven't figured out a way to flash to stock using OS X Lion since Heimdall doesn't work and Odin is Windows only... Mods please lock or close thread because I don't need help anymore

sebbo1 said:
Well thanks for all your help! Happy that my phone is working again without having to flash to stock.
Phone booted normally once I switched to SlimBean. Much snappier and responsive than LiquidSmooth. Fixed the problems I was having with WiFi also.
Still haven't figured out a way to flash to stock using OS X Lion since Heimdall doesn't work and Odin is Windows only... Mods please lock or close thread because I don't need help anymore
Click to expand...
Click to collapse
Glad you got it going man, and enjoy Slim, it's hands down the best ROM there is if you prefer minimal with tons of customization options.

Stuck in infinite CM spinner on Verizon LG G2

I'm a bit of a newbie with rooting and flashing but have been pretty successful up until now. I installed TWRP 2.3.6.2 and CM 10.2 on my Verizon LG G2 about a month ago.
Since then I've been updating with nightlies with much success.
When the 11.0 build showed up in the CM updates list I downloaded it and installed. It failed and I had to flash an older 10.2 nightly. My device became pretty unstable after this. Most GApps were gone or somehow corrupted. I re-installed a number of them but Google Play still didn't work.
I tried updating again to an 11.0 nightly today and again it failed. I then flashed a recent 10.2 nightly that had worked for me and now my phone is stuck an infinite spinning Cyanogenmod boot screen.
I have tried every combination of holding power and volume down to try to get into TWRP to try flashing another nightly but my device just continues to reboot to LG then Cyanogenmod spinner over and over.
I decided maybe I needed to reinstall TWRP (looks like there's a new version from today). I tried to access my device with it plugged into my computer using fastboot and adb push loki_flash and it returned "device not found."
I'm totally stuck now... no idea what to do next. Would be so grateful for some guidance on how to get my device functional again.
Thanks.

One additional comment: I've tried doing Power + Volume Down during LG logo but it doesn't do anything.
I managed to get into a Hardware Key Control Mode screen by holding Power + Volume Up + Volume Down which had some options about answering calls or turning off alarm using hardware keys.
Cannot seem to do anything to get to TWRP.

To get to TWRP:
* Hold Power until the phone shuts off
* Hold Power+Volume Down until the LG logo appears
* Release Power+Volume Down then immediately hold them both down again
You'll get a message to the effect of 'Press Power to permanently erase all user settings.' Do that (if you have a custom recovery installed, it'll just boot into that).
Also keep in mind that the first install of a custom rom like CM will sit on that logo screen for a couple of minutes.

I somehow just managed to get to a screen that says "Factory hard reset. Permanently Erase User Data & Reset Settings? Press Power key to confirm, and any other key to cancel." It says "Rooted" in the upper left corner.
The screen doesn't respond to Volume Up or Volume Down and I just let it sit there for a few minutes. It reverted back to the infinite CM spinner.
At this point I'm pretty much at a loss for what to do -- and afraid to do anything to mess things up even more.
Should I be trying to go back to stock? http://forum.xda-developers.com/showthread.php?t=2432476

antinorm said:
To get to TWRP:
* Hold Power until the phone shuts off
* Hold Power+Volume Down until the LG logo appears
* Release Power+Volume Down then immediately hold them both down again
You'll get a message to the effect of 'Press Power to permanently erase all user settings.' Do that (if you have a custom recovery installed, it'll just boot into that).
Also keep in mind that the first install of a custom rom like CM will sit on that logo screen for a couple of minutes.
Click to expand...
Click to collapse
Thanks for this suggestion -- I'll try to get back to that screen and do this. Also the CM spinner was stuck for 8 hours last night... so definitely not a function of bit of a delay for first install of a custom ROM.

tophy0 said:
I somehow just managed to get to a screen that says "Factory hard reset. Permanently Erase User Data & Reset Settings? Press Power key to confirm, and any other key to cancel." It says "Rooted" in the upper left corner.
The screen doesn't respond to Volume Up or Volume Down and I just let it sit there for a few minutes. It reverted back to the infinite CM spinner.
At this point I'm pretty much at a loss for what to do -- and afraid to do anything to mess things up even more.
Should I be trying to go back to stock? http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
This screen is what you want to see. Push Power a couple of times. It won't erase your settings. It'll boot into TWRP.

tophy0 said:
Thanks for this suggestion -- I'll try to get back to that screen and do this. Also the CM spinner was stuck for 8 hours last night... so definitely not a function of bit of a delay for first install of a custom ROM.
Click to expand...
Click to collapse
Phew, that worked! Back into TWRP.
Any additional guidance on what I should be doing to try to get back into a stable version of CM? I have many builds of CM 10.2 in internal storage that I could pick from. But before I try another one of those should I attempt to clean things up at all? Seems like my current configuration must have some sort of conflict that's leading to all the instability. I do have Titanium Pro installed so I believe I should be able to get my apps + data back as long as I don't completely clean out everything.
Thanks again for the help.

Also mods: just realized that I should have posted this thread in Q&A not General. Sorry about that! I don't think I can move it over myself or I would.

I think what I would like to do now is update TWRP to 2.6.3.3 and then install 11.0 using this build: http://www.droidforums.net/forum/lg-g2-development/258385-rom-wip-cyanogenmod-11-g2-vzw.html
Not sure how to update TWRP from 2.6.3.2 to 2.6.3.3 though. When I originally set up TWRP I used adb / loki-push but it's a bit of a blur how that worked since I was just following step 1-2-3 instructions.
Sorry for being such a noob with this stuff. Any additional guidance would be awesome.

As I suspected, flashing any CM ROM now leads to an infinite CM spinner so I think I need a plan B to get my device working again. At least I can now get to TWRP thanks to the help above.
Not sure where to go from here.

Did you try to wipe data, cache, dalvik cache and system? Then install cm. I think this is why you got a bootloop :/
Sent from my GOOPHONE i5C using XDA Premium 4 mobile app

Makrilli said:
Did you try to wipe data, cache, dalvik cache and system? Then install cm. I think this is why you got a bootloop :/
Sent from my GOOPHONE i5C using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yup, when I finally got into TWRP I did this and was able to install a version of CM 10.2 that actually loaded.
All my apps and settings are obviously gone now so it's a good time to make the leap to TWRP 2.6.3.3 and CM 11.0. Trying to figure out how to do that now (in the proper forum!):
http://forum.xda-developers.com/showthread.php?t=2563982
Thanks for the help.

tophy0 said:
Yup, when I finally got into TWRP I did this and was able to install a version of CM 10.2 that actually loaded.
All my apps and settings are obviously gone now so it's a good time to make the leap to TWRP 2.6.3.3 and CM 11.0. Trying to figure out how to do that now (in the proper forum!):
http://forum.xda-developers.com/showthread.php?t=2563982
Thanks for the help.
Click to expand...
Click to collapse
I htink the wipe would have helped from the beg. Any time you jump roms I suggest doing a wipe. Also one thing you may want to look at is a backup of all your settings and everything, I use titanium and it has helped me out in situations like this in the past.

madisonjar said:
I htink the wipe would have helped from the beg. Any time you jump roms I suggest doing a wipe. Also one thing you may want to look at is a backup of all your settings and everything, I use titanium and it has helped me out in situations like this in the past.
Click to expand...
Click to collapse
Thanks, makes a ton of sense.
I also use Titanium to backup. When I do a fresh install of TWRP and CM 11.0 can I restore my system data in addition to apps + app data? I'm not sure to what restoring extent system data could create conflicts with the CM 11.0 build. For example will all the Google Mobile Services system data from my CM 10.2 build create conflicts?
What I really want is to easily bring back ~150 apps + all of my SMS messages, Contacts, Email settings, Homescreen layout and settings, etc. Not exactly sure what's achievable.

tophy0 said:
What I really want is to easily bring back ~150 apps + all of my SMS messages, Contacts, Email settings, Homescreen layout and settings, etc. Not exactly sure what's achievable.
Click to expand...
Click to collapse
You can safely use TB to restore user apps, their data and trebutchets data if you use that. Backing up sms and contacts with TB, I'm not sure about that as I used other app "super sms backup". And about emails I have no idea. Also it's not a good idea to restore settings, better to set them again
Sent from my GOOPHONE i5C using XDA Premium 4 mobile app

antinorm said:
To get to TWRP:
* Hold Power until the phone shuts off
* Hold Power+Volume Down until the LG logo appears
* Release Power+Volume Down then immediately hold them both down again
You'll get a message to the effect of 'Press Power to permanently erase all user settings.' Do that (if you have a custom recovery installed, it'll just boot into that).
Also keep in mind that the first install of a custom rom like CM will sit on that logo screen for a couple of minutes.
Click to expand...
Click to collapse
I owe you man! Saw the erase data screen and almost freaked out. Pressed power and it booted to TWRP.
Thanks again!
Mike

WCM3 said:
I owe you man! Saw the erase data screen and almost freaked out. Pressed power and it booted to TWRP.
Thanks again!
Mike
Click to expand...
Click to collapse
You know, I was wondering as well of how to get to TWRP if a rom didn't boot. I got to that screen too and thought it would erase the phone. This is good to know and should be a sticky somewhere.

[Q] multirom +n4 halp

Hi, I wanted to reply in the multirom thread but can't because I am still too newb. Hopefully someone here can point me in the right direction? I've tried everything I know how to do. I really appreciate any help I can get!
So here is my problem. I downloaded multirom for my n4, then I updated. I reopened, and noticed I had the red line of text saying I was missing a kernal or something, so I clicked that and install (so instead of just updating the app I updated my kernal? and I also clicked update recovery). I needed to finish in recovery mode so it rebooted. Then it soft bricked. It goes to the load screen (with countdown timer) and then just black screens indefinitely tmk (5+ minutes of adhd agony). I had already downloaded cm 10.2 and gapps on the device in preparation for multirom, so I rebooted into recovery again, launched multirom and added cm 10.2 with gapps. I first tried with sharing kernal because I don't have my laptop to install 4.3 .tar, but that failed, so I installed ROM without sharing kernal. It runs fine, except I can't use bluetooth or wifi... so it really doesn't run fine =/ everything else seems okay though.
All my data is already backed up on my hdd so no worries on losing that, but I would like my phone functioning sooner than later.
I'm on vacation and don't have laptop with me, any ideas on how I can fix this? I have my Nexus 7 too, so I can download stuff, but I don't know how to:
a) install 4.3 so I can get cm 10.2 fully running?
b) reinstall 4.4.2 to stock (I tried factory reset but it didn't do anything either)
I think the biggest problem is lack of laptop because I could easily just reset the phone with that and run my nandroid (which is on laptop too.... ftl) but if there is a solution please let me know! Thanks!!!

krkeco said:
Hi, I wanted to reply in the multirom thread but can't because I am still too newb. Hopefully someone here can point me in the right direction? I've tried everything I know how to do. I really appreciate any help I can get!
So here is my problem. I downloaded multirom for my n4, then I updated. I reopened, and noticed I had the red line of text saying I was missing a kernal or something, so I clicked that and install (so instead of just updating the app I updated my kernal? and I also clicked update recovery). I needed to finish in recovery mode so it rebooted. Then it soft bricked. It goes to the load screen (with countdown timer) and then just black screens indefinitely tmk (5+ minutes of adhd agony). I had already downloaded cm 10.2 and gapps on the device in preparation for multirom, so I rebooted into recovery again, launched multirom and added cm 10.2 with gapps. I first tried with sharing kernal because I don't have my laptop to install 4.3 .tar, but that failed, so I installed ROM without sharing kernal. It runs fine, except I can't use bluetooth or wifi... so it really doesn't run fine =/ everything else seems okay though.
All my data is already backed up on my hdd so no worries on losing that, but I would like my phone functioning sooner than later.
I'm on vacation and don't have laptop with me, any ideas on how I can fix this? I have my Nexus 7 too, so I can download stuff, but I don't know how to:
a) install 4.3 so I can get cm 10.2 fully running?
b) reinstall 4.4.2 to stock (I tried factory reset but it didn't do anything either)
I think the biggest problem is lack of laptop because I could easily just reset the phone with that and run my nandroid (which is on laptop too.... ftl) but if there is a solution please let me know! Thanks!!!
Click to expand...
Click to collapse
WHY DID THE ERROR HAPPENED?:Because multirom app sets the default kernel to 4.2.2 one, since you werent on 4.2.2 it soft bricked.
DO I NEED TO REINSTALL STOCK TO GET CM FULLY WORKING?: Nope, just search in the general section of our device, for the hybrid modem thread, download the hybrid .84 and flash on recovery
PS: I think you will need OTG to pass the file from your n7 to your n4 since no bluetooh,no data and no wifi....
Or search like crazy around google to see if there is a way to pass files thru nfc

Thanks for the quick reply, is that the 27 or the 33 / 84 download?
sites.google.com/site/bpearuploads/
Or does it not matter?

opssemnik said:
WHY DID THE ERROR HAPPENED?:Because multirom app sets the default kernel to 4.2.2 one, since you werent on 4.2.2 it soft bricked.
DO I NEED TO REINSTALL STOCK TO GET CM FULLY WORKING?: Nope, just search in the general section of our device, for the hybrid modem thread, download the hybrid .84 and flash on recovery
PS: I think you will need OTG to pass the file from your n7 to your n4 since no bluetooh,no data and no wifi....
Or search like crazy around google to see if there is a way to pass files thru nfc
Click to expand...
Click to collapse
Got it figured out thanks to your help!