Related
Alright, so I finally found a Razr M that has the bootloader unlocked and went to root it and it wouldn't root. I booted into recovery and it has TWRP installed on it so I tried to install CleanRom and it failed and said something about it tried to patch something but I can get a picture if need be.
I'm kind of at a loss on what I need to do, bootloader is definitely unlocked since it has the splash screen and it says unlocked on the black screen (sorry don't know what it's called). It's on baseband .81P so if there is anything anyone could tell me I would greatly appreciate it.
collins521 said:
Alright, so I finally found a Razr M that has the bootloader unlocked and went to root it and it wouldn't root. I booted into recovery and it has TWRP installed on it so I tried to install CleanRom and it failed and said something about it tried to patch something but I can get a picture if need be.
I'm kind of at a loss on what I need to do, bootloader is definitely unlocked since it has the splash screen and it says unlocked on the black screen (sorry don't know what it's called). It's on baseband .81P so if there is anything anyone could tell me I would greatly appreciate it.
Click to expand...
Click to collapse
Which tool did you use to root? The first time I tried to root right after getting the phone, I had to wipe cache/dalvik and FDR. Also, since your BL is unlocked, you should just be able to flash a SU binary in TWRP and get root. I know there's one running around here somewhere.
RikRong said:
Which tool did you use to root? The first time I tried to root right after getting the phone, I had to wipe cache/dalvik and FDR. Also, since your BL is unlocked, you should just be able to flash a SU binary in TWRP and get root. I know there's one running around here somewhere.
Click to expand...
Click to collapse
I tried the Batman utility and also motofail2go
collins521 said:
I tried the Batman utility and also motofail2go
Click to expand...
Click to collapse
Motofail was for 4.1.1 and Motochopper was for 4.1.2 (this was included in the utility 1.20). Sometimes these things have to be run multiple times, at least that's what I've seen.
Here's Chopper by itself: http://www.droidrzr.com/index.php/topic/15208-root-motochopper-yet-another-android-root-exploit-412/ . However, you might have to wipe to get this to work, I did anyway. Before it comes to that, I would try to flash SU in recovery.
Thanks, flashed the SU Binary's and I'm up and running..now I have root and all is well in the world haha
Awesome! Been trying to solve that world peace issue like forever, man! Good deal!
Sent from my XT907 using Tapatalk 4 Beta
Lol now to get a 4.2.2 rom (Well maybe it isn't .2 I can't remember) to actually boot on here...can't seem to get it past the boot animation and I've flashed SlimBean, Chameleon, and another
Ok, so last OTA worked. Here is what i did:
I used triangle away's feature to hide system modified warning
i downloaded the OTA update
I disabled the triangle away fix before installing OTA (like it says to do in triangle away)
Phone rebooted and installed the OTA in CWM
Done.
I tried this today to upgrade from 4.3 to whatever is being pushed by my carrier (kitkat)
this time, when i install the OTA, it reboots to CWM and CWM says "install untrusted zip?" I hit yes, it says install aborted. I hit no, it says same thing.
I have heard others mention this, and were told to restore a stock recovery. I have found instructions to do that here:
http://www.android.gs/how-to-install-stock-recovery-for-the-samsung-galaxy-s4-i9500-i9505/
But i dont have a i9500, i have the canadian model, the i337m
Can i still flash the stock recovery image from an i9500? or will i brick something.
also not understanding why i have to do any of this when it worked last time and nothing has changed....maybe because its jumping from 4.3 to 4.4 ... i dunno..
Any advice appreciated, id love to get this OTA. I just dont want roms anymore, only stock. but i want to stay up to date with my android version, and that is becoming tough for me.
thanks.
luke318is said:
Ok, so last OTA worked. Here is what i did:
I used triangle away's feature to hide system modified warning
i downloaded the OTA update
I disabled the triangle away fix before installing OTA (like it says to do in triangle away)
Phone rebooted and installed the OTA in CWM
Done.
I tried this today to upgrade from 4.3 to whatever is being pushed by my carrier (kitkat)
this time, when i install the OTA, it reboots to CWM and CWM says "install untrusted zip?" I hit yes, it says install aborted. I hit no, it says same thing.
I have heard others mention this, and were told to restore a stock recovery. I have found instructions to do that here:
http://www.android.gs/how-to-install-stock-recovery-for-the-samsung-galaxy-s4-i9500-i9505/
But i dont have a i9500, i have the canadian model, the i337m
Can i still flash the stock recovery image from an i9500? or will i brick something.
also not understanding why i have to do any of this when it worked last time and nothing has changed....maybe because its jumping from 4.3 to 4.4 ... i dunno..
Any advice appreciated, id love to get this OTA. I just dont want roms anymore, only stock. but i want to stay up to date with my android version, and that is becoming tough for me.
thanks.
Click to expand...
Click to collapse
Thats exactly because you're upgrading from 4.3 to kk and yeah bootloaders differ probably that's the reason recovery and roms should be flashed if they are specifically for your model i9300 cabt have a rom which is for i9505 it bricks your phone same with recovery and yeah better make a clean flash via odin!
I guess i want to know what to do now. How do i get the Ota? How do i get stock recovery back
These are basic questions that have been anwsered 1000 times already. There is a search button you know.
First of all this is not the i1337m forum.
Second flashing stuff on your phone that is not for you phone is the dumbest thing to do. You should know that before you start messing with your phone.
Go to your forum and use the search button.
Lennyz1988 said:
These are basic questions that have been anwsered 1000 times already. There is a search button you know.
First of all this is not the i1337m forum.
Second flashing stuff on your phone that is not for you phone is the dumbest thing to do. You should know that before you start messing with your phone.
Go to your forum and use the search button.
Click to expand...
Click to collapse
Ill do just fine without you're attitude, take it elsewhere
Hello all, I come asking for help. I recently had an issue with my note 3. I tried to update my twrp with the twrp manager, I had safestrap 3.75 and then used the twrp manager to try and flash the new 3.8.4.0 twrp, but after it flashed I went to recovery and tried to install cm12 but kept getting the error "this build is for hltevzw, you have a ." When trying to install. So I went full stock, flashed the new stock stuff via odin. Then rerooted with towelroot, installed superSU, then the safestrap 3.75. Now I can get to safestrap recovery, but if I try to install cm12, I will follow directions, flash rom, flash gapps, then I've tried flashing superSU as some have suggested, and tried not flashing superSU, but then my phone reboots, goes past the splash screen showing the unlock and says custom, sits at a black screen for a while, then reboots. Only when it reboots, at the splash screen it says loafing recovery in red at the top, then I get a screen saying that custom software has been detected and I need to take the phone in to Verizon or something like that. The only way to get out of it is to shut down, boot into download, and then hit volume down to cancel. It just keeps doing that same thing over and over. I was able to get eclipse rom installed, but cm12 always does the same thing. I've also gone into the safestrap 3.75 recovery and flashed the twrp 3.8.4.0, it says it was successful, but then I'll reboot, get to the safestrap screen, hit recovery, and it is still the older one with safestrap 3.75, not the updated one I just flashed. If I try to shut down my phone and power on using volume up, home, and power, I get the stock recovery saying that it has detected custom software and blah blah blah. So, I have a bunch of problems and honestly I am not sure what is going on. I have scoured the Web for 3 days now trying to find instructions on updating the recovery, every single one is the same as I described above with the same outcome. I've also been searching for how to install cm12, with the same results. Can anyone help me, I am so annoyed, lost, confused, and just.... please help. Thank you.
Tldr; recovery stuck on safestrap 3.75 regardless of flashing the newer twrp 3.8.4.0, and when trying to reboot into recovery using volume up, home, and power, I get the stock recovery with a message saying custom software detected. Please help.... please. I am on hltevzw with nc4. Rooted with towelroot, and safestrap 3.75.
you have a retail note 3 cm12 is for the dev edition the retail bootloader will only load samsung based firmware note 3 or 4 or the s5 are possible but all with touchwiz running the samsung kernel.
if you had a dev note 3 it has an unlockable bootloader and you needed to unlock that first.
If you had a dev unit and updated it via kies you just turned it into a retail unit permanently...
mirrin said:
you have a retail note 3 cm12 is for the dev edition the retail bootloader will only load samsung based firmware note 3 or 4 or the s5 are possible but all with touchwiz running the samsung kernel.
if you had a dev note 3 it has an unlockable bootloader and you needed to unlock that first.
If you had a dev unit and updated it via kies you just turned it into a retail unit permanently...
Click to expand...
Click to collapse
I do have the Verizon version, so no dev ed here, but tamasek has put out a version of cm12 that works on the verizon, sprint, and t-mobile versions of the note 3. I realize it's unofficial and we aren't supposed to post about problems with unofficial builds, but my problem covers more than just cm12 not working. I never knew that tidbit about upgrading via kies ruins dev edition though, that's a trip.
danwguy said:
I do have the Verizon version, so no dev ed here, but tamasek has put out a version of cm12 that works on the verizon, sprint, and t-mobile versions of the note 3. I realize it's unofficial and we aren't supposed to post about problems with unofficial builds, but my problem covers more than just cm12 not working. I never knew that tidbit about upgrading via kies ruins dev edition though, that's a trip.
Click to expand...
Click to collapse
Yep kies loads the retail bootloader and since it is the exact same hardware with the exception of an unlock able bootloader and a dev bit flipped the retail bootloader will load to it and flip the dev bit off... it may work or hard brick the unit i can't remember i want to say the unit worked and was for all intents a retail unit after that.
I can't find any thing on a version of cm12 for the retail version also sprint and t-mobile don't count those devices don't have locked bootloader I was looking to confirm but I know the t-mobile one was unlocked looking at the sprint section that one seems like it too.
only att and Verizon locked them... and Verizon has the $ 700 dev units in which all that was done is a bit was flipped and an unlock able bootloader installed.
just found his thread on it yes his cm12 is for dev units on Verizon only...
mirrin said:
Yep kies loads the retail bootloader and since it is the exact same hardware with the exception of an unlock able bootloader and a dev bit flipped the retail bootloader will load to it and flip the dev bit off... it may work or hard brick the unit i can't remember i want to say the unit worked and was for all intents a retail unit after that.
I can't find any thing on a version of cm12 for the retail version also sprint and t-mobile don't count those devices don't have locked bootloader I was looking to confirm but I know the t-mobile one was unlocked looking at the sprint section that one seems like it too.
only att and Verizon locked them... and Verizon has the $ 700 dev units in which all that was done is a bit was flipped and an unlock able bootloader installed.
just found his thread on it yes his cm12 is for dev units on Verizon only...
Click to expand...
Click to collapse
The one I was trying to load up was from here https://s.basketbuild.com/devs/temasek/Samsung Galaxy Note 3 - HLTEVZW/CM12/Old
it's for dev editions only? That is a huge disappointment, I was really hoping to get some android Learn on my phone
Do you have any idea why, after I flash the twrp 3.8.4.0 recovery from safestrap recovery, after I reboot I am still showing safestrap and the older twrp. It's like the new version flashes, but then just disappears and the old version loads up.
Thank you for all your help man, I really appreciate it.
danwguy said:
The one I was trying to load up was from here https://s.basketbuild.com/devs/temasek/Samsung Galaxy Note 3 - HLTEVZW/CM12/Old
it's for dev editions only? That is a huge disappointment, I was really hoping to get some android Learn on my phone
Do you have any idea why, after I flash the twrp 3.8.4.0 recovery from safestrap recovery, after I reboot I am still showing safestrap and the older twrp. It's like the new version flashes, but then just disappears and the old version loads up.
Thank you for all your help man, I really appreciate it.
Click to expand...
Click to collapse
Because TWRP doesn't work on the Verizon Note 3...that is why SafeStrap exists. Safestrap is based on TWRP but is not TWRP.
Sent from my Note 3 via Tapatalk
donc113 said:
Because TWRP doesn't work on the Verizon Note 3...that is why SafeStrap exists. Safestrap is based on TWRP but is not TWRP.
Sent from my Note 3 via Tapatalk
Click to expand...
Click to collapse
They exist in different areas of memory safe strap essentially hijacks the boot process before the phone can boot and tells it to instead boot this way if you want to update the version of twrp it us using you need to update safestrap it is what is holding us back from 4.4.4 and it will be what slows 5.0 unless someone updates safestrap or comes up with something new. All I know is I'm going to get a nexus next time I'm done with this locked bootloader bull****.
Thank you guys both for your help. I completely understand what you guys are saying. I guess I got confused because I found an official twrp 3.8.4.0 for hltevzw, so I thought it should work. I'm wondering how hard it would actually be to put the newer version of twrp into safestrap. I know the person that was building it is no longer developing it, so does that mean that we are pretty much not getting 5.0 unless we wait for Verizon to push it?
danwguy said:
Thank you guys both for your help. I completely understand what you guys are saying. I guess I got confused because I found an official twrp 3.8.4.0 for hltevzw, so I thought it should work. I'm wondering how hard it would actually be to put the newer version of twrp into safestrap. I know the person that was building it is no longer developing it, so does that mean that we are pretty much not getting 5.0 unless we wait for Verizon to push it?
Click to expand...
Click to collapse
Not necessarily the developers working on jasmine have been claiming to be working on a replacement for safestrap.
Verizon will eventually push out 5.0 but I doubt it will be anytime soon even then if I don't have root I don't want so I am not sure what I'll end up doing I'll try to wait it out maybe a mistake will happen and 5.0 will have some thing that leads to a bl unlock. If only they would make root an option like the dev menu...
and my prediction for when verizon will put out 5.0 I would say October is not out of range. Also it will likely be the note 3's last update that Verizon gives.
Hello. I'm currently using a Galaxy S4 cus my old phone broke, and it's on 4.4.4 KK. I rooted it using Odin and I337_NC1_Stock_Kernel and the I337_NJ4_Stock_Kernel. I tried to download TWRP, but when I tried to boot recovery it just has a custom icon when I try booting and it just goes to Odin mode. I can boot normally just fine, I just want to know if I can boot recovery so I can add some fancy stuff to my new (old?) phone. Can someone help me? Thanks!!!
Forgot to say that this is an AT&T S4 i1337.
The bootloader may be locked on the phone which, I believe, means you need to use safestrap and stick with tw- based ROMs.
audit13 said:
The bootloader may be locked on the phone which, I believe, means you need to use safestrap and stick with tw- based ROMs.
Click to expand...
Click to collapse
awwwwwww
okay. any way to get rid of the custom thing when i boot? Samsung and under it, it has a custom logo
You may need root to change the logo but I am not sure as I don't have the i337. My phone is the i337m.
audit13 said:
You may need root to change the logo but I am not sure as I don't have the i337. My phone is the i337m.
Click to expand...
Click to collapse
i do have root :c
Unfortunately, I don't know how the change the boot logo. Not even sure if there is a way to do it,
Hi all,
I have a AT&T Galaxy S4 i337. The WIFI doesn't work. It seems to be a very common problem as there are many fixes on the internet. I have tried them all and I don't know what to do now. It is running V. 4.3 and my baseband version is i337ucugoc4.
- Rooted. Installed Rom Manager, Terminal Emulator, SuperSU, and Reverse Tether so I could use the internet (because no wifi).
- Tried to install a new modem but could not find the exact modem file. I saw a list at http://forum.xda-developers.com/showthread.php?t=2496517 but didn't know which was good for my phone. I saw I337_UCUGOC3_Modem_RockRatt.zip but it ends in a 3 not a 4 as required for my modem.
- tried to update using the AT&T Software update. It stayed at "Checking for software updates...." and then said "Software update interrupted. No updates available. Check back in 24 hours". Don't know if that would have solved the WIFI problem anyhow.
- Tried again to install to 5.0 thru USB. Downloaded and installed it but when I rebooted, it was still 4.3
- Downloaded FXR wifi and ran it - no luck there.
- downloaded the modem file ATT_OC4_modules.zip and flashed it to the phone. It said SUCCESSFUL but there was no wifi afterwards.
- Adjusted the source code with terminal emulator as I saw in a youtube video. No success and I changed it back to the original.
- Downloaded wifi manager and tried turned off-then-on wifi.
- probably more things I have forgotten in the last three days.
I have tried everything I can find to try. It has been 3 days of trying - very frustrated. I would very much appreciate direction on this. To recap, I need to get wifi working and want to upgrade to lolipop.
Thanks so much,
Amber
amberblossom said:
Hi all,
I have a AT&T Galaxy S4 i337. The WIFI doesn't work. It seems to be a very common problem as there are many fixes on the internet. I have tried them all and I don't know what to do now. It is running V. 4.3 and my baseband version is i337ucugoc4.
- Rooted. Installed Rom Manager, Terminal Emulator, SuperSU, and Reverse Tether so I could use the internet (because no wifi).
- Tried to install a new modem but could not find the exact modem file. I saw a list at http://forum.xda-developers.com/showthread.php?t=2496517 but didn't know which was good for my phone. I saw I337_UCUGOC3_Modem_RockRatt.zip but it ends in a 3 not a 4 as required for my modem.
- tried to update using the AT&T Software update. It stayed at "Checking for software updates...." and then said "Software update interrupted. No updates available. Check back in 24 hours". Don't know if that would have solved the WIFI problem anyhow.
- Tried again to install to 5.0 thru USB. Downloaded and installed it but when I rebooted, it was still 4.3
- Downloaded FXR wifi and ran it - no luck there.
- downloaded the modem file ATT_OC4_modules.zip and flashed it to the phone. It said SUCCESSFUL but there was no wifi afterwards.
- Adjusted the source code with terminal emulator as I saw in a youtube video. No success and I changed it back to the original.
- Downloaded wifi manager and tried turned off-then-on wifi.
- probably more things I have forgotten in the last three days.
I have tried everything I can find to try. It has been 3 days of trying - very frustrated. I would very much appreciate direction on this. To recap, I need to get wifi working and want to upgrade to lollipop.
Thanks so much,
Amber
Click to expand...
Click to collapse
May I ask why is your bootloader is lollipop but your OS rom is still Jelly bean ( you said 4.3). It appears that you might have jelly bean kernel which will not work with lollipop modem and bootloader. Majority of the wifi problem is caused by the kernel and bootloader mismatched, assuming that your radio (modem) has no physical damage. Try to flash the OC4 kernel and see you still have the wifi problem.
If you want to upgrade to lollipop from Jelly bean, there are several guides on this forum explaining step by step.
I flashed the OC4 kernal - no change in wifi
sway8966 said:
May I ask why is your bootloader is lollipop but your OS rom is still Jelly bean ( you said 4.3). It appears that you might have jelly bean kernel which will not work with lollipop modem and bootloader. Majority of the wifi problem is caused by the kernel and bootloader mismatched, assuming that your radio (modem) has no physical damage. Try to flash the OC4 kernel and see you still have the wifi problem.
If you want to upgrade to lollipop from Jelly bean, there are several guides on this forum explaining step by step.
Click to expand...
Click to collapse
Thanks sway8966,
I flashed the OC4_update_from_OC3.zip file but there was no change - still no wifi. I wonder if I were to upgrade to lollipop would it automatically fix the problem because it would have the matching bootloader and OS rom? Do you think this might solve the problem?
Thanks again.
amberblossom said:
Thanks sway8966,
I flashed the OC4_update_from_OC3.zip file but there was no change - still no wifi. I wonder if I were to upgrade to lollipop would it automatically fix the problem because it would have the matching bootloader and OS rom? Do you think this might solve the problem?
Thanks again.
Click to expand...
Click to collapse
I do not know what included in the oc4 update from oc3.zip file. As I said before you could try flashing the OC4 kernel file and see whether your wifi is working or not.
Here is the link for the OC4 kernel. You need to flash it via odin.
If you do not have any particular reason to stick with Jelly bean you should upgrade to Lollipop or at least to Kit-kat.
Hi! I had an s4 variant with your problem the same, the wifi nope in none routers.
I gave this device to trash , because i discovered what "happened"
Some stock app, from samsung, masked as anything that i skipped to search (i have much precious time to loose, instead loose really, lost time BRITISH DEVICES IN EXT4 filesystem) what app exactly, is receiving data from samsung server to delete the /system/etc/wifi/bcmdhd.cal
I was obligated to reinstall this file 4 times, changed permission to r--r--r--T untill resolve. But was not sufficient, after this, my wifi, fixed again, but the phone at 8ยบ reboot, after , received a remote conmand again to turn the phone ridiculously slower, i lost my head and crashed this device on the wall, and nevermore i will use this name. Sorry,
All this happened just exactly, after install cwm and root sucessfully, without touch anything on the firmware. Something from samsung inc, is programmed to "detect" these 2 events, and send a "tick" to begin the hell in fire on this devices GT S-Xx
Sent from my XT687 using xda premium
won't boot past the SAMSUNG screen
sway8966 said:
I do not know what included in the oc4 update from oc3.zip file. As I said before you could try flashing the OC4 kernel file and see whether your wifi is working or not.
Here is the link for the OC4 kernel. You need to flash it via odin.
If you do not have any particular reason to stick with Jelly bean you should upgrade to Lollipop or at least to Kit-kat.
Click to expand...
Click to collapse
I flashed the OC4 kernel and it won't boot past the SAMSUNG screen.
amberblossom said:
I flashed the OC4 kernel and it won't boot past the SAMSUNG screen.
Click to expand...
Click to collapse
Your phone is probably in soft-brick now. You need to flash the 4.3 firmware via odin or You need to update to full kit-kat.
If you want to go kit-kat flash this NB1 firmware via odin. It is NB1 but the kernel is NC1 so that you can use towel root to root the phone. Anyway flash that firmware and see the phone is normally booting and wifi is working.
IT WORKED!!!
sway8966 said:
Your phone is probably in soft-brick now. You need to flash the 4.3 firmware via odin or You need to update to full kit-kat.
If you want to go kit-kat flash this NB1 firmware via odin. It is NB1 but the kernel is NC1 so that you can use towel root to root the phone. Anyway flash that firmware and see the phone is normally booting and wifi is working.
Click to expand...
Click to collapse
Thank you so much. It worked. I got my phone back and the wifi is working. Pretty nice. Thanks again. Now to figure out towel root (is that the best for my phone?). You are awesome.
couple more questions
sway8966 said:
Your phone is probably in soft-brick now. You need to flash the 4.3 firmware via odin or You need to update to full kit-kat.
If you want to go kit-kat flash this NB1 firmware via odin. It is NB1 but the kernel is NC1 so that you can use towel root to root the phone. Anyway flash that firmware and see the phone is normally booting and wifi is working.
Click to expand...
Click to collapse
I rooted with towelroot (verified with root checker). I installed superuser but didn't see how to remove bloatware. There are no apps in the apps list. How do I do that? Also, now that it is rooted, is it possible to upgrade it to lollipop? Thanks again.
amberblossom said:
I rooted with towelroot (verified with root checker). I installed superuser but didn't see how to remove bloatware. There are no apps in the apps list. How do I do that? Also, now that it is rooted, is it possible to upgrade it to lollipop? Thanks again.
Click to expand...
Click to collapse
I am glad to hear that it fixes your problem. The NB1 firmware (cooked by muniz_ri) is a live saver. Keep that one. Down the line if your phone screwed up used that one to revive your phone.
Majority of bloatware are system app as such they will not show up in the app bar To remove those you need an admin rights (root) hence we need to root the phone.
To remove the bloatware there are many bloatware remove apps. However they are not written to the specific phone and OS version as such you need to be very careful when you are using them.
I use titanium backup pro to either freeze or remove the bloatware one by one. You can find the list of bloatware for each version on the net. Another way is to install the lean custom rom.
If you want to upgrade to Lollipop you can do it. If somethings screws up you can use that NB1 to come back to Kitkat.
The latest lollipop for the sgh-i337 is OK2 but OK2 gave me some problem that I could not live with it so I stay at OC4.
If you want to upgrade to OK2 or OC4 do let me know. I will point you the guide and necessary files.
CyanogenMod
sway8966 said:
I am glad to hear that it fixes your problem. The NB1 firmware (cooked by muniz_ri) is a live saver. Keep that one. Down the line if your phone screwed up used that one to revive your phone.
Majority of bloatware are system app as such they will not show up in the app bar To remove those you need an admin rights (root) hence we need to root the phone.
To remove the bloatware there are many bloatware remove apps. However they are not written to the specific phone and OS version as such you need to be very careful when you are using them.
I use titanium backup pro to either freeze or remove the bloatware one by one. You can find the list of bloatware for each version on the net. Another way is to install the lean custom rom.
If you want to upgrade to Lollipop you can do it. If somethings screws up you can use that NB1 to come back to Kitkat.
The latest lollipop for the sgh-i337 is OK2 but OK2 gave me some problem that I could not live with it so I stay at OC4.
If you want to upgrade to OK2 or OC4 do let me know. I will point you the guide and necessary files.
Click to expand...
Click to collapse
I guess I will pass on lollipop if there was a problem with it. I looked around for a rom and saw CyanogenMod. It looked pretty good but they discontinued the installer. Can I download it on my PC, move it to the ext card on the S4 and install it from there? Without any changes to my current configuration of the S4? Thanks again.
amberblossom said:
I guess I will pass on lollipop if there was a problem with it. I looked around for a rom and saw CyanogenMod. It looked pretty good but they discontinued the installer. Can I download it on my PC, move it to the ext card on the S4 and install it from there? Without any changes to my current configuration of the S4? Thanks again.
Click to expand...
Click to collapse
I did not say lollipop has a problem, what I meant was I had some problem with lollipop OK2 as such I stay with lollipop OC4.
I took it as you are talking about the CyanogenMoD for the locked bootloader .
You can install that one. You need to install the safestrap first to flash that rom, as mentioned on that link. However, the link also mentioned that you can not make a phone call with that rom as such they stop developing that rom.
sway8966 said:
I did not say lollipop has a problem, what I meant was I had some problem with lollipop OK2 as such I stay with lollipop OC4.
I took it as you are talking about the CyanogenMoD for the locked bootloader .
You can install that one. You need to install the safestrap first to flash that rom, as mentioned on that link. However, the link also mentioned that you can not make a phone call with that rom as such they stop developing that rom.
Click to expand...
Click to collapse
Oh, I didn't understand. I think I would like to try to get up to lollipop. Can you point me to the kernel for that? Also, I have been trying to install CyanogenMod but am running into roadblocks. I think I might have succeeded finally because I now have a yellow triangle and a notice about non-AT&T system software (with a tiny notice - secure fail: kernel). I also had a difficult time installing TWRP as the installer was asking for a file format that the installer didn't download. From what I gather, CyanogenMod looks like a good all around OS and was easy to install when the installer was in play. But if there is another that would suffice but is easier to install, I think that might be a better idea. Could you suggest one?
Sorry about all these questions. I don't know why this is so difficult for me. I feel like an idiot. Thanks again.
amberblossom said:
Oh, I didn't understand. I think I would like to try to get up to lollipop. Can you point me to the kernel for that? Also, I have been trying to install CyanogenMod but am running into roadblocks. I think I might have succeeded finally because I now have a yellow triangle and a notice about non-AT&T system software (with a tiny notice - secure fail: kernel). I also had a difficult time installing TWRP as the installer was asking for a file format that the installer didn't download. From what I gather, CyanogenMod looks like a good all around OS and was easy to install when the installer was in play. But if there is another that would suffice but is easier to install, I think that might be a better idea. Could you suggest one?
Sorry about all these questions. I don't know why this is so difficult for me. I feel like an idiot. Thanks again.
Click to expand...
Click to collapse
SGH-i377 has locked bootloader as such we can not install custom recovery like TWRP or CWM. The only installers we have are safestrap and flashfire. When I was in Kit-kat I used safestrap. It is very troublesome to work with safestrap in lollipop so when I upgrade to lollipop I use falshfire instead.
I have two devices that are on cyanogen mod. I like cyanogen mod but I prefer touch-wiz rom over AOSP though.
The only cyanogen mod you can install is the one that I mentioned in my previous message. You need to use safestrap to install it.
For SGH-I337 you can only install the touch-wiz rom which are written for either safestrap or flashfire. I do not see any AOSP rom written for safestrap or flashfire.
What I did was flash NB1 via odin. root with towl root and install the flashfire. Flash the OC4 rom via flashfire and flash the OC4 bootloader via odin. After my phone boot to lollipop OC4, Installed flashfire and flash the Albe95 S6 port rom. I like to use the S6 features and that custom rom is a stable one. Do you think the process is easy enough?
To upgrade to Lollipop,
I assumed that you are back on NB1 and rooted. If not do that process first. (you mentioned that you installed the cyanogenmode)
Here is the guide telling you step by step how to install lollipop from NB1.
The guide was originally written for OC4 but when OK2 came out it was updated with OK2. So if you want to go to OK2, use the files that mentioned on the guide. If you want to go to OC4 use the file I posted below instead.
I337_OC4_Stock_Rooted_ROM.zip
I337_OC4_Stock_Rooted_Deodexed_ROM
I337_OC4_Bootloader.tar.md5
The choice between using normal and deodexed_rom is your call.