Related
Here is the Droid Razr HD software update. I have not tested it as I use CM 10.1 and have no interest in going back to stock. I found it on www.droidrzr.com in a forum post then shared it on my dropbox account.
I posted it on my Dropbox account so not sure how long it will last until the link is gone:
https://www.dropbox.com/s/d2x9vutel4vnqmm/Blur_Version.9.16.6.XT926.Verizon.en.US.zip
It does "fix" the bootloader unlock exploit though
http://www.droid-life.com/2013/07/1...the-kernel-exploit-for-unlocking-bootloaders/
scoobaspeaz said:
Here is the Droid Razr HD software update. I have not tested it as I use CM 10.1 and have no interest in going back to stock. I found it on www.droidrzr.com in a forum post then shared it on my dropbox account.
I posted it on my Dropbox account so not sure how long it will last until the link is gone:
https://www.dropbox.com/s/d2x9vutel4vnqmm/Blur_Version.9.16.6.XT926.Verizon.en.US.zip
Click to expand...
Click to collapse
So, stock recovery to install this?
I would assume you would need to be 100% stock, including the recovery, to install this.
scoobaspeaz said:
I would assume you would need to be 100% stock, including the recovery, to install this.
Click to expand...
Click to collapse
hmm put it on my internal storage and its not found, I think stock recovery wants to see it on a sdcard.
If your boot loader is unlocked before the update, it should stay unlocked. You just will not be able to unlock with methods out there now.
Sent from my Razr HD using xda app-developers app
I received the OTA today on my Max HD. It was build 9.18.79.
Sent using xda premium
A few questions I haven't been able to find answers to (many threads have been started on this new update topic and I haven't found the answers I'm looking for yet):
1) I've heard that there are two versions of this update, 9.20.xx and 9.18.xx... Anyone know the differences yet? Is one version for phones that have been unlocked and the other for phones that are still locked? Is one version for XT925 and the other for XT926? I received the 9.18 version, I am rooted, unlocked, and have a XT926 phone.
2) Anyone with an already unlocked bootloader try and take the update? Do you remember which version of the update you took? Did it install correctly? Are you still unlocked?
3) Anyone that is rooted and unlocked try to take the update? Did it install correctly? Are you still rooted and unlocked after the update? Did you have to protect the root with either SuperSU or Voodoo OTA Root Keeper? If so, do you mind posting step-by-step instructions for protecting the root so the phone is still rooted after the update?
Thanks to all who can shed light on these questions!
LifeAsADroid said:
A few questions I haven't been able to find answers to (many threads have been started on this new update topic and I haven't found the answers I'm looking for yet):
1) I've heard that there are two versions of this update, 9.20.xx and 9.18.xx... Anyone know the differences yet? Is one version for phones that have been unlocked and the other for phones that are still locked? Is one version for XT925 and the other for XT926? I received the 9.18 version, I am rooted, unlocked, and have a XT926 phone.
2) Anyone with an already unlocked bootloader try and take the update? Do you remember which version of the update you took? Did it install correctly? Are you still unlocked?
3) Anyone that is rooted and unlocked try to take the update? Did it install correctly? Are you still rooted and unlocked after the update? Did you have to protect the root with either SuperSU or Voodoo OTA Root Keeper? If so, do you mind posting step-by-step instructions for protecting the root so the phone is still rooted after the update?
Thanks to all who can shed light on these questions!
Click to expand...
Click to collapse
There are 2 different versions, depends on what System version you have of 4.1.2 on the XT926 only. The 9.18.79 version would indicate that your Systems version is 9.16.6 if this is not correct DO NOT FLASH. I am Rooted/Unlocked, if you take the plunge you must OTA Rootkeeper/SuperSU backup SU, as the update breaks Root> IF there is no backup of SU with the latest binaries. If you lose Root, there are a couple of ways to Downgrade. A common problem for those of us Root/Unlocked the Update FAILs at the end. Most of the Update goes through, however the new Radio does not go through, as of right now if you Update and your Baseband is VANQUISH_BP_100730.081.64.09P then you have the OLD radio, the new Radio is VANQUISH_BP_100730.160.64.15P.
Between the 2 OTA's these should match-up as either 9.16.6 = 9.18.79 or 9.16.9 = 9.20.1
Thanks for the reply! A few more questions if you don't mind (would hate to do something wrong... like I did last time... luckily I was able to revert back to an original version and fix the install... sigh...):
4) With protecting root, I need the SuperSU Pro version, yes? To be able to use the survival mode, yes? Will Voodoo OTA Rootkeeper do the same thing? Is it possible to use both "to be sure"?
5) I have everything backed up with Titanium Backup. Should I bother getting the pro version and backing everything up using the cloud backup and hypershell? Or won't this matter since if root doesn't keep I won't be able to use Titanium Backup?
6) I also have performed the VZW Wireless Hotspot hack using SQLite. Am I going to have to undo the hack in order for the OTA update to work?
Thanks again for all your help!
Update - I decided to attempt the update and hope for the best. System update 9.18.79.xx updating from 9.16.6.xx.
I purchased the SuperSU Pro from the Play Store, and used the survival mode in SuperSU. I also used the Voodoo OTA Rootkeeper and protected root. I figured if one didn't work the other might... Voodoo worked to protect and re-install root access (not sure about SuperSU as I tried Voodoo first to restore root after the install).
I am unsure if the bootloader is still unlocked, but from what people have said there doesn't seem to be a reason to believe it is re-locked. I haven't tested it out to know for sure though.
It appears that the entire update installed correctly. No errors, and the baseband version was updated to the new radio (xxx.15P).
I did not undo the VZW Wireless Hotspot hack prior to installing the update.
Hopefully this post helps others out there.
My final question... what does updating the radio/baseband do exactly?
i need help! i tried installing the update but i forgot i had TWRP.. so the update did not got installed, i rebooted the phone, but the OS tried to install the update again and inmediatly reboot the phone in recovery again .. then from recovery i flashed liquid smooth rom but i got stuck in the boot animation... my big issue is that my power button is broken! now i cant reset the phone to enter in fastboot mode.. i cant do anything... now my battery is totally drained and i cant turn on the phone (my power button does not work).. i can plug the usb cable and the led turns green. but i dont see any more options
rodmc123 said:
i need help! i tried installing the update but i forgot i had TWRP.. so the update did not got installed, i rebooted the phone, but the OS tried to install the update again and inmediatly reboot the phone in recovery again .. then from recovery i flashed liquid smooth rom but i got stuck in the boot animation... my big issue is that my power button is broken! now i cant reset the phone to enter in fastboot mode.. i cant do anything... now my battery is totally drained and i cant turn on the phone (my power button does not work).. i can plug the usb cable and the led turns green. but i dont see any more options
Click to expand...
Click to collapse
My suggestion, let your phone charge a bit.
Once charged up, turn it on and get it into Fastboot. From there you can use the DROID RAZR HD UTILITY 1.21 (http://forum.xda-developers.com/showthread.php?t=2307439). In that utility option 1 will bring you back to complete stock ROM, option 2 will bring you back to a stock recovery. This will completely erase your phone.
This should at least give you a fresh functioning phone. If you want to try to keep your data or personal files, I'm not sure what you could load via fastboot to get yourself a functioning phone again (maybe just a kernel?).
As a side note, I used TWRP to load the update and my phone updated except the radios it seems. It sounds like the same thing happens with the stock recovery.
Lenny
KachowPow said:
There are 2 different versions, depends on what System version you have of 4.1.2 on the XT926 only. The 9.18.79 version would indicate that your Systems version is 9.16.6 if this is not correct DO NOT FLASH. I am Rooted/Unlocked, if you take the plunge you must OTA Rootkeeper/SuperSU backup SU, as the update breaks Root> IF there is no backup of SU with the latest binaries. If you lose Root, there are a couple of ways to Downgrade. A common problem for those of us Root/Unlocked the Update FAILs at the end. Most of the Update goes through, however the new Radio does not go through, as of right now if you Update and your Baseband is VANQUISH_BP_100730.081.64.09P then you have the OLD radio, the new Radio is VANQUISH_BP_100730.160.64.15P.
Between the 2 OTA's these should match-up as either 9.16.6 = 9.18.79 or 9.16.9 = 9.20.1
Click to expand...
Click to collapse
So any idea how one might fix this?
LifeAsADroid said:
A few questions I haven't been able to find answers to (many threads have been started on this new update topic and I haven't found the answers I'm looking for yet):
1) I've heard that there are two versions of this update, 9.20.xx and 9.18.xx... Anyone know the differences yet? Is one version for phones that have been unlocked and the other for phones that are still locked? Is one version for XT925 and the other for XT926? I received the 9.18 version, I am rooted, unlocked, and have a XT926 phone.
2) Anyone with an already unlocked bootloader try and take the update? Do you remember which version of the update you took? Did it install correctly? Are you still unlocked?
3) Anyone that is rooted and unlocked try to take the update? Did it install correctly? Are you still rooted and unlocked after the update? Did you have to protect the root with either SuperSU or Voodoo OTA Root Keeper? If so, do you mind posting step-by-step instructions for protecting the root so the phone is still rooted after the update?
Thanks to all who can shed light on these questions!
Click to expand...
Click to collapse
I tried to take the 9.18.79 update I protected the root (I'm not unlocked) before I did so I also temporarily un-rooted (I've always been told to do this before and update) Now I an no longer rooted and it can't find any SU binary codes. Gonna have to flash back to 9.6.16 and try it again I guess or stay on 9.6.16 in order to maintain root for now. If you find a solution please share.
IDroidThere4Iam said:
My suggestion, let your phone charge a bit.
Once charged up, turn it on and get it into Fastboot. From there you can use the DROID RAZR HD UTILITY 1.21 (http://forum.xda-developers.com/showthread.php?t=2307439). In that utility option 1 will bring you back to complete stock ROM, option 2 will bring you back to a stock recovery. This will completely erase your phone.
This should at least give you a fresh functioning phone. If you want to try to keep your data or personal files, I'm not sure what you could load via fastboot to get yourself a functioning phone again (maybe just a kernel?).
As a side note, I used TWRP to load the update and my phone updated except the radios it seems. It sounds like the same thing happens with the stock recovery.
Lenny
Click to expand...
Click to collapse
I agree with Lenny. This same thing happened to me when I tried to take the liquid smooth ROM. Follow his instructions above. You'll lose all your pics, vids, files, etc. But at least you'll have a working phone again.
Went smoothly here
All my devices except this one are rooted and some are rom'd. I thought long and hard about whether to void this warranty but decided one day it would be out of updates from VZW and I would want to flash something. I have been denying the OTA for the last day so I figured now or never.
Here are the simple steps:
Download and install Moto device manager (for the USB drivers) here
Enable USB debugging in developer options on the phone
run motochopper here
run motoapocolypse here
install voodooOTA root keeper from Play and backup root
apply OTA
It went error free. The phone has the 15P radio update, unlocked BL and root.
larsdennert said:
It went error free. The phone has the 15P radio update, unlocked BL and root.
Click to expand...
Click to collapse
I want to confirm something, you unlocked the bootloader and then took the OTA and the bootloader remain unlocked (and stayed rooted due to root keeper)?
So the benefit to all this would be to get the new radio update?
bananapeapod said:
I want to confirm something, you unlocked the bootloader and then took the OTA and the bootloader remain unlocked (and stayed rooted due to root keeper)?
So the benefit to all this would be to get the new radio update?
Click to expand...
Click to collapse
Yes, the bootloader won't get locked again after it is unlocked. Moto would be shooting themselves having to reinstate warranties if they did that. Yes I wanted the option of flashing later becuase the ota will install sooner or later. I also want to stay on the upgrade path for now to have current radios.
I still have an Eris lying around that is long out of support but i have gb on it.
IDroidThere4Iam said:
My suggestion, let your phone charge a bit.
Once charged up, turn it on and get it into Fastboot. From there you can use the DROID RAZR HD UTILITY 1.21 (http://forum.xda-developers.com/showthread.php?t=2307439). In that utility option 1 will bring you back to complete stock ROM, option 2 will bring you back to a stock recovery. This will completely erase your phone.
This should at least give you a fresh functioning phone. If you want to try to keep your data or personal files, I'm not sure what you could load via fastboot to get yourself a functioning phone again (maybe just a kernel?).
As a side note, I used TWRP to load the update and my phone updated except the radios it seems. It sounds like the same thing happens with the stock recovery.
Lenny
Click to expand...
Click to collapse
that's what i want to do, but i cant because my power button is broken! so i cant enter to fastboot mode without the power button.. i will have to open my phone and try to fix the power button myself.
Just to make a point and to clear up any confusion, this Update will not lock the Bootloader. If you have an Unlocked Bootloader then you will have an Unlocked Bootloader after the update, regardless if it fully works or not, and even if you lose Root, the Bootloader will still be Unlocked. If Root is lost with an Unlocked Bootloader, I suggest downgrading through an FXZ of either 9.16.6 or 9.16.9 and restore Root.
First I have been to and searched every post and site I can find to turn this thing around, with no success. Sent several emails.
Took a rooted New Nexus 7 that had been restored back because it froze/did not respond. Got a new N7, unlocked bootloader and installed TWRP using Terminal (Mac) booted into recovery (TWRP) it said you are not rooted, install SU by swiping below. I swiped and tried to reboot and it stops at X. I have wiped, reinstalled TWRP and used a One Click Toolkit to Root. no success. Not really sure what I did wrong.....given I have always trusted TWRP.
Anyway... have unlocked bootloader, TWRP installed and cannot get Android File Transfer to recognize device. Welcome help or suggestions.
Thank you in advance.
David
Same thing happened to me. Don't listen to TWRP about SU. You'll need to do it manually for it to be successful. Follow the instructions here: http://forum.xda-developers.com/showthread.php?t=2381582. This won't relock your bootloader. You just need to root it by flashing the SU zip found on one if the "How to root" threads.
natezire71 said:
Same thing happened to me. Don't listen to TWRP about SU. You'll need to do it manually for it to be successful. Follow the instructions here: http://forum.xda-developers.com/showthread.php?t=2381582. This won't relock your bootloader. You just need to root it by flashing the SU zip found on one if the "How to root" threads.
Click to expand...
Click to collapse
Yeah, youre correct, you have to manually flash twrp. I would suggest running the utility to make youre device boot again, then make sure you have the LATEST twrp, then reboot and flash COMPATIBLE SU and you should be golden. Im not sure about macs though but you should deff be goin the right way.
Thank you, I used that site the last time I got into trouble. Do you or anyone know of a Mac site that will get me out of this rut. I won't have access to a PC for a few days and am anxious to set this tablet up.
Thank you for response,
David
dschaap said:
Thank you, I used that site the last time I got into trouble. Do you or anyone know of a Mac site that will get me out of this rut. I won't have access to a PC for a few days and am anxious to set this tablet up.
Thank you for response,
David
Click to expand...
Click to collapse
Give this a try: http://forum.xda-developers.com/showthread.php?t=2395003
I don't have a Mac, so I don't know if this will help. Only thing I could find.
dschaap said:
Thank you, I used that site the last time I got into trouble. Do you or anyone know of a Mac site that will get me out of this rut. I won't have access to a PC for a few days and am anxious to set this tablet up.
Thank you for response,
David
Click to expand...
Click to collapse
If you were able to install using a Mac, then you should have no troubles setting things up again. Avoid toolkits if you can, especially during the early days where things are buggy.
If you put your tablet into fastboot though, you can get started by going ahead and running fastboot -w and then flashing the stock recovery images back on. Sure, you won't have root, but I've found that 1) root doesn't take super nicely unless you're already signed into the tablet anyway, and 2) regardless of 1), once your bootloader is unlocked you might as well get set up and then root afterwards.
Mine did the same thing. What I did to fix was:
1. Go into recovery and format data in the wipe menu.
2. Then factory reset.
3. Restart os.
This was posted by decksy post #11 in tutorial for unlock, recovery, and root thread so if it works thank him.
Sent from my Nexus 7 using xda app-developers app
I know outside of Att note 3 it hasn't been confirmed to work but wondering if anyone tried it on other note devices? Thanks.
Sent from my iPhone using Tapatalk
Used it installed safestrap and when it reboots get the unlock symbol on the boot screen
Sent from my SM-N900V using XDA Premium 4 mobile app
Works fine on my device. For the unlock symbol, download latest SU and updated binaries. That will go away.
Sent from my SM-N900V using Tapatalk
Definitely works for getting root. Rooted, installed SuperSU, Xposed, SafeStrap all successfully. Now struggling to get a rom to work (tried Eclipse & Hyperdrive). Both say they install successfully via SafeStrap and then hangs on boot up. I've seen one other post on the Eclipse thread for the same problem, so it might be something to keep an eye on.
i can verify that this method works. i just installed superuser and it works flawlessly. the only thing is make sure to download the superuser app from here so you have the updated binaries: http://download.chainfire.eu/447/SuperSU/UPDATE-SuperSU-v1.99r4.zip
re
i have root access verified w/root checker
downloaded v1.99r4.zip and installed it
when i open it it asks for me to update binary and it fails installation
any ideas or workarounds??
lazygregg said:
i have root access verified w/root checker
downloaded v1.99r4.zip and installed it
when i open it it asks for me to update binary and it fails installation
any ideas or workarounds??
Click to expand...
Click to collapse
Rerun towelroot
re
drewcam888 said:
Rerun towelroot
Click to expand...
Click to collapse
i've done that multiple times...
reran towelroot, it reboots phone..open supersu the version that i downloaded earlier from the website and try to download supersu binary and it fails
lazygregg said:
i've done that multiple times...
reran towelroot, it reboots phone..open supersu the version that i downloaded earlier from the website and try to download supersu binary and it fails
Click to expand...
Click to collapse
I seem to be in the same boat as well. Things I have tried and it still does not work:
Installed Play Store Edition
Installed 1.99r4
Installed 1.99r5
All of them are saying I need to update binaries. While I am technically rooted and can grant permissions to apps, I need to get into SuperSU so I can modify some settings.
There are several others have issues on Reddit as well, so its not a couple of people.
exaltedgod said:
I seem to be in the same boat as well. Things I have tried and it still does not work:
Installed Play Store Edition
Installed 1.99r4
Installed 1.99r5
All of them are saying I need to update binaries. While I am technically rooted and can grant permissions to apps, I need to get into SuperSU so I can modify some settings.
There are several others have issues on Reddit as well, so its not a couple of people.
Click to expand...
Click to collapse
Try this. Install safestrap 3.7x. Open it, give su permission, install recovery, hit the home button. Open supersu, update binary thru cwm/twrp. Don't click to reboot phone into recovery from supersu. Hold down home and bring safestrap back up. Reboot to recovery from there and it should update the binary. Hope this helps.
Sent from my SM-N900V using XDA Premium HD app
Dc4479 said:
Try this. Install safestrap 3.7x. Open it, give su permission, install recovery, hit the home button. Open supersu, update binary thru cwm/twrp. Don't click to reboot phone into recovery from supersu. Hold down home and bring safestrap back up. Reboot to recovery from there and it should update the binary. Hope this helps.
Click to expand...
Click to collapse
This is being very peculiar. After I installed Safe Strap, SuperSU went fine, able to get in and do what I needed to get done. I reboot into recovery. Made a backup, and rebooted system. Went right to SuperSU again. And the same issue occurs, constantly asking for updated binaries. I am trying everyone once more to make it all work. If not, then I will just stick with what I have and hopefully it doesn't cause any other issues.
Thank you for the help thus far. :good:
exaltedgod said:
This is being very peculiar. After I installed Safe Strap, SuperSU went fine, able to get in and do what I needed to get done. I reboot into recovery. Made a backup, and rebooted system. Went right to SuperSU again. And the same issue occurs, constantly asking for updated binaries. I am trying everyone once more to make it all work. If not, then I will just stick with what I have and hopefully it doesn't cause any other issues.
Thank you for the help thus far. :good:
Click to expand...
Click to collapse
Yeah I just did all this last night...I installed SafeStrap and installed Recovery, then went into SuperSU and clicked Normal when asking for updating Binaries and it hasnt asked again thankfully. All of this of course was after installing BusyBox from the Play Store.
Note though: Safestrap isnt working for flashing roms just yet, just like someone else said here, and someone else said this in the Jasmine Rom forum. I just tried it myself and everything looks fine when installing, but then when you boot up, screen goes black and unresponsive after the SS splash screen on a reboot. Hopefully we have an update to SS soon. Fair warning - make sure you create a backup of your System/Data, etc in SS before messing around...it makes it so much easier to restore in case something screws up.
pmt223 said:
Yeah I just did all this last night...I installed SafeStrap and installed Recovery, then went into SuperSU and clicked Normal when asking for updating Binaries and it hasnt asked again thankfully. All of this of course was after installing BusyBox from the Play Store.
Note though: Safestrap isnt working for flashing roms just yet, just like someone else said here, and someone else said this in the Jasmine Rom forum. I just tried it myself and everything looks fine when installing, but then when you boot up, screen goes black and unresponsive after the SS splash screen on a reboot. Hopefully we have an update to SS soon. Fair warning - make sure you create a backup of your System/Data, etc in SS before messing around...it makes it so much easier to restore in case something screws up.
Click to expand...
Click to collapse
So, can someone enlighten me on what this "root" does? I've been running SafeStrap 3.72 with HyperROM 8 and just yesterday, successfully installed Towelroot on my Verizon Note 3. I downloaded the new SU to my SDcard before running Towelroot and was able to run it immediately after root and all looks good. But... what did I actually gain? Can I now install Cyanogen or others? I am a bit fuzzy on the difference, if any, on a rooted phone vs. an unlocked bootloader. Those of us on the Verizon retail Note 3 still don't have unlocked bootloaders do we? I miss the ease of playing with my old S3! LOL. Thanks!
emtownsend said:
So, can someone enlighten me on what this "root" does? I've been running SafeStrap 3.72 with HyperROM 8 and just yesterday, successfully installed Towelroot on my Verizon Note 3. I downloaded the new SU to my SDcard before running Towelroot and was able to run it immediately after root and all looks good. But... what did I actually gain? Can I now install Cyanogen or others? I am a bit fuzzy on the difference, if any, on a rooted phone vs. an unlocked bootloader. Those of us on the Verizon retail Note 3 still don't have unlocked bootloaders do we? I miss the ease of playing with my old S3! LOL. Thanks!
Click to expand...
Click to collapse
No, you dont gain an unlocked bootlader. At this point, only the Almighty will make that happen lol. For us with Verizon Notes (and some others), this helps the folks who either a) dont want to use Kingo or the other web methods, and b) folks who were on stock 4.4.2 NC4, like from an OTA (like me). This now gave me root, where when the OTA came out people were fearing there would never be a root for it (thanks to everyone else who put monies towards a bounty). Many people as well as myself cannot use SafeStrap successfully to fully flash a rom yet (you'll see this remarked in a lot of places), so Im sure there is an update forthcoming. In the meantime, I can use TB and freeze/uninstall a lot of the bloatware crap, and use Xposed for whatever else, which is fine by me. But no, we are still a no-go on full rooting and unlocked bootladers like on some other phones, which means no CyanogenMod, etc.
pmt223 said:
No, you dont gain an unlocked bootlader. At this point, only the Almighty will make that happen lol. For us with Verizon Notes (and some others), this helps the folks who either a) dont want to use Kingo or the other web methods, and b) folks who were on stock 4.4.2 NC4, like from an OTA (like me). This now gave me root, where when the OTA came out people were fearing there would never be a root for it (thanks to everyone else who put monies towards a bounty). Many people as well as myself cannot use SafeStrap successfully to fully flash a rom yet (you'll see this remarked in a lot of places), so Im sure there is an update forthcoming. In the meantime, I can use TB and freeze/uninstall a lot of the bloatware crap, and use Xposed for whatever else, which is fine by me. But no, we are still a no-go on full rooting and unlocked bootladers like on some other phones, which means no CyanogenMod, etc.
Click to expand...
Click to collapse
Ah. Got it. Thanks!
* I successfully used SafeStrap to install HyperROM 8 on slot 1 only, so I had to lose my stock ROM, but I'm OK with that.
cnotes2019 said:
I know outside of Att note 3 it hasn't been confirmed to work but wondering if anyone tried it on other note devices? Thanks.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
i rooted today with towelroot. i have a verizon note 3 on 4.4.2
Just got the notice. Updating now!
About damn time.
Sent from my XT1058 using XDA Free mobile app
Yep, bought mine outright through Fido, updated tonight.
I'm using it on Bell, nice to see you can finally get rid of your carrier label in the status bar.
Yay, now do I unroot and try the OTA or do I wait for the full image.
ChrisAG said:
Yep, bought mine outright through Fido, updated tonight.
I'm using it on Bell, nice to see you can finally get rid of your carrier label in the status bar.
Click to expand...
Click to collapse
You can? How? I didn't save the link to the release notes, and can't find them now.
thedosbox said:
You can? How? I didn't save the link to the release notes, and can't find them now.
Click to expand...
Click to collapse
Removing provider name from the Status bar:
Settings > Wireless & Networks > More > Mobile Networks > Show Mobile Network (check on or off)
I completely forgot about the carrier being removed. Really cool.
Sent from my XT1058 using XDA Free mobile app
Install went fine, I unrooted, upgraded and then rooted again with no problem. The show carrier on/off is a great upgrade, I don't have to mess with modifying APK's anymore.
The new dialer will take some time to get used to.
Steve-x said:
Install went fine, I unrooted, upgraded and then rooted again with no problem. The show carrier on/off is a great upgrade, I don't have to mess with modifying APK's anymore.
The new dialer will take some time to get used to.
Click to expand...
Click to collapse
Ugh... I have TWRP on mine. Can I just unroot, or I need to remove TWRP? (read: flash stock 4.4.2...)
OK. Ended up flashing the whole damn phone again.
So which root method works for us, Rogers users?
R3dbeaver said:
OK. Ended up flashing the whole damn phone again.
So which root method works for us, Rogers users?
Click to expand...
Click to collapse
I removed root using the option in Super SU and then flashed the system.img and recovery.img from 4.4.2 in fastboot.(probably didn't need to do anything with Super SU because I reflashed system.img)
I then let the phone update. When it was done I went back into fastboot and flashed TWRP to recovery, went into recovery and let it begin the root process. From there boot up and update Super SU and finish rooting.
Overall a pretty painless way to go from 4.4.2 to 4.4.4 without losing any data or settings. All of this assumes you have an unlocked bootloader of course.
Steve-x said:
I removed root using the option in Super SU and then flashed the system.img and recovery.img from 4.4.2 in fastboot.(probably didn't need to do anything with Super SU because I reflashed system.img)
I then let the phone update. When it was done I went back into fastboot and flashed TWRP to recovery, went into recovery and let it begin the root process. From there boot up and update Super SU and finish rooting.
Overall a pretty painless way to go from 4.4.2 to 4.4.4 without losing any data or settings. All of this assumes you have an unlocked bootloader of course.
Click to expand...
Click to collapse
Ah you used TWRP's.
OK cool. Will give it a shot. Will try. I'm assuming I need SuperSU and BusyBox installed beforehand? Remember, I'm starting clean here.
R3dbeaver said:
Ah you used TWRP's.
OK cool. Will give it a shot. Will try. I'm assuming I need SuperSU and BusyBox installed beforehand? Remember, I'm starting clean here.
Click to expand...
Click to collapse
If your bootloader is unlocked then it is very simple. Just go to fastboot and flash the TWRP recovery, once flashed you can access it from fastboot. TWRP will load, then you can just select to restart the phone from it and it will ask if you want to root the phone, swipe to confirm and it will do it and restart the phone for you. Once the phone is booted you will need to finish the process - it should prompt you to update SuperSU, I selected the play store option, it downloaded and installed and was done. From there do yourself a favor and install AdAway
waiting for the firmware image..... anybody knows where to get it?
It has been posted to one of the various sites. I grabbed it the other night but couldn't tell you which site it was from as I am at work right now. Enough searching should find it.
Steve-x said:
It has been posted to one of the various sites. I grabbed it the other night but couldn't tell you which site it was from as I am at work right now. Enough searching should find it.
Click to expand...
Click to collapse
Would you please send the download link when you are convinient? I searched and find this http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=25, but looks something wrong with the system.img.
Steve-x said:
I removed root using the option in Super SU and then flashed the system.img and recovery.img from 4.4.2 in fastboot.(probably didn't need to do anything with Super SU because I reflashed system.img)
I then let the phone update. When it was done I went back into fastboot and flashed TWRP to recovery, went into recovery and let it begin the root process. From there boot up and update Super SU and finish rooting.
Overall a pretty painless way to go from 4.4.2 to 4.4.4 without losing any data or settings. All of this assumes you have an unlocked bootloader of course.
Click to expand...
Click to collapse
Thanks, works a charm, went from rooted 4.4.2 to 4.4.4.
PS- I grew up in Langley.
I don't know if it's dumb luck or not, but I didn't even unroot and was able to accept OTA to 4.4.4.
This is what I did to prepare the phone:
- Uninstall Xposed Framework from within the Xposed installer itself. Left the installer app in place.
- Changed recovery from TWRP back to factory.
- Enabled all apps previously disabled.
At this point my phone was still rooted. I accepted the OTA and everything worked fine.
Afterwards, I re-installed Xposed from the installer app, and re-disabled the apps I don't use. But left the factory recovery in place since I don't have a need to go into TWRP for now.
Everything is working fine.
No Rogers Update?
I just picked up a Moto X (Brand New) It came with 4.2.2 Im with Rogers, It is a Rogers phone , its been 2 hours now still no software update notification. When I try to check manually in about phone, system update. Keeps telling me my device is up to date??
Any one experienced this before? Or am I being to impatient
Now, a dummy question: what is Rogers?
Rogers is the Canadian phone company that's selling the original Moto X
Hi,
I have the OnePlus 5 8GB.
I unlocked my bootload, rooted my phone, all good.
But then I realized android pay is not working with rooted phones, so i wanted to undo it.
for some reason i ran this because i found it in a guide to lock the bootloader again (yes, it was was stupid):
./fastboot flashing lock
After that i got the message that my device is corrupt and cant boot. So i ran ./fastboot oem unlock and that message disappeard.
I tried booting, but nothing happend for 10 minutes, still boot animation. so i went into fastboot, flashed twrp and tried doing a factory reset, but whatever i do, I get tons of these error messages:
Updating partition details...
Error opening: '/data/misc/[...]
Error opening: '/data/user_de/0/[...['
(No such file or directory)
What can I do?
I can even ADB sideload because of those errors.
edit:
also it shows nothing for bootloader version or baseband version in the fastboot screen.
https://imgur.com/a/z2KN3
doesnt look good. cant copy anything to device or from device
Might have to RMA the phone. I'm not sure I've seen anyone unbrick a phone after locking the bootloader with a custom recovery still installed. I hope someone knows of a way. Good luck bro.
Also, of you get it working, use Magisk, it allows Android pay to work while rooted
Eric214 said:
Might have to RMA the phone. I'm not sure I've seen anyone unbrick a phone after locking the bootloader with a custom recovery still installed. I hope someone knows of a way. Good luck bro.
Also, of you get it working, use Magisk, it allows Android pay to work while rooted
Click to expand...
Click to collapse
Anything I should do to have them not reject the RMA?
thx for the Magisk advice, using it now.
Oh I think i got it.
flashed the OP5_recovery.img from their website via fastboot, android launched again!!!
TheCorax said:
Anything I should do to have them not reject the RMA?
Click to expand...
Click to collapse
Since it's obvious someone tampered with the software, they may reject it.
You don't lose warranty if you root, but they won't cover the cost if anything happens to it due to the user's intervention.
If you manage to get the stock ROM onto the phone, you may be able to flash it from TWRP.
TheCorax said:
Oh I think i got it.
flashed the OP5_recovery.img from their website via fastboot, android launched again!!!
Click to expand...
Click to collapse
So, did it work? Did it boot Android or just recovery? Please let us know so that anyone who comes up with this problem can solve it without suffering as much as you did.
Sent from my OnePlus 5 using XDA Labs
elbuenzurdo said:
So, did it work? Did it boot Android or just recovery? Please let us know so that anyone who comes up with this problem can solve it without suffering as much as you did.
Sent from my OnePlus 5 using XDA Labs
Click to expand...
Click to collapse
Yes it works again. That what I meant by android is launching.
TheCorax said:
Yes it works again. That what I meant by android is launching.
Click to expand...
Click to collapse
How do you do to get your device recognized? I have a similar problem for that command. But muy device just turned off and doesnt do nothing, Im trying flash it but nothing atm.
I have a leeco le s3 x626