Help! I've reset the flash counter through Triangle Away, unrooted my phone, and even flashed stock rom to my Note 3, but still getting this message: "Your device has been modified. Software updates are not available." When I'm trying to update my Note 3. How to fix this? Sorry for noob question.
re: OTA
kokoro18 said:
Help! I've reset the flash counter through Triangle Away, unrooted my phone, and even flashed stock rom to my Note 3, but still getting this message: "Your device has been modified. Software updates are not available." When I'm trying to update my Note 3. How to fix this? Sorry for noob question.
Click to expand...
Click to collapse
When you flashed the stock rom was it the ODIN flash rom which can be found and
downloaded from http://SamMobile.com ?
There are a lot of twrp/cwm flashable stock roms but if you want to make your phone stock
so it can get OTA updates the stock official rom must be the odin flash type and you need to
un-install root then do a full wipe before odin flashing the official stock rom.
Good luck!
Misterjunky said:
When you flashed the stock rom was it the ODIN flash rom which can be found and
downloaded from http://SamMobile.com ?
There are a lot of twrp/cwm flashable stock roms but if you want to make your phone stock
so it can get OTA updates the stock official rom must be the odin flash type and you need to
do a full wipe before flashing the official stock odin flash rom before odin'ing.
Good luck!
Click to expand...
Click to collapse
Yes, I've flashed the stock rom through odin which I have downloaded from sammobile and did a full wipe. Still no luck. Help please!
kokoro18 said:
Yes, I've flashed the stock rom through odin which I have downloaded from sammobile and did a full wipe. Still no luck. Help please!
Click to expand...
Click to collapse
what is it your trying to update?
if your knox is tripped you won't be able to update through OTA afaik
Related
Not to sure if this in the right place. my phone was updated by kies this morning. i then tried to install omega 4.3 but it failed and wouldn't let me restore my back up. i then tried to flash a stock rom that i got from sam mobile and it wouldn't work i keep getting a msg on the phone sayin su check fail fuse 2 binary 1. i can still connect with odin and flash the atuo root any help here would be much appreciated some one has told me i need a copy of the very latest updated fw i am on I9505XXUBMF8 also after flashing atuo route when the phone reboot it loads the s4 screen the goes black and vibrates any help would be appreciated thanks kyle
kylewismith said:
Not to sure if this in the right place. my phone was updated by kies this morning. i then tried to install omega 4.3 but it failed and wouldn't let me restore my back up. i then tried to flash a stock rom that i got from sam mobile and it wouldn't work i keep getting a msg on the phone sayin su check fail fuse 2 binary 1. i can still connect with odin and flash the atuo root any help here would be much appreciated some one has told me i need a copy of the very latest updated fw i am on I9505XXUBMF8 also after flashing atuo route when the phone reboot it loads the s4 screen the goes black and vibrates any help would be appreciated thanks kyle
Click to expand...
Click to collapse
i maybe wrong but you have to root again when you flash stock tw you will lose root
kylewismith said:
Not to sure if this in the right place. my phone was updated by kies this morning. i then tried to install omega 4.3 but it failed and wouldn't let me restore my back up. i then tried to flash a stock rom that i got from sam mobile and it wouldn't work i keep getting a msg on the phone sayin su check fail fuse 2 binary 1. i can still connect with odin and flash the atuo root any help here would be much appreciated some one has told me i need a copy of the very latest updated fw i am on I9505XXUBMF8 also after flashing atuo route when the phone reboot it loads the s4 screen the goes black and vibrates any help would be appreciated thanks kyle
Click to expand...
Click to collapse
bootloader locked.
you can not downgrade. flash MH8
odin fails at id0/005> aboot mbn if this helps any 1
samersh72 said:
bootloader locked.
you can not downgrade. flash MH8
Click to expand...
Click to collapse
where can i get it and do i still flash with odin?
kylewismith said:
where can i get it and do i still flash with odin?
Click to expand...
Click to collapse
http://www.hotfile.com/dl/243289856/5f90db9/I9505XXUDMH8_I9505OXXDMHA_BTU.zip.html
yes with odin.
perform wipe after flashing
samersh72 said:
http://www.hotfile.com/dl/243289856/5f90db9/I9505XXUDMH8_I9505OXXDMHA_BTU.zip.html
yes with odin.
perform wipe after flashing
Click to expand...
Click to collapse
many thanks will give it a shot:good:
samersh72 said:
http://www.hotfile.com/dl/243289856/5f90db9/I9505XXUDMH8_I9505OXXDMHA_BTU.zip.html
yes with odin.
perform wipe after flashing
Click to expand...
Click to collapse
appears to be working kudos smashersh72 very great full for your help :victory:
When Kies upgraded the firmware it updated the bootloader. Unfortunately you are stuck on Official firmware MHG8 and higher. There are some roms out now with an official MH8 base and you might be able to flash the CM110 roms BUT at this point
Omega is MH1 base so you can't flash this...
How do I flash official stock Rome through recovery mode??
My recovery version is v2.6.3.0 (teamwin). my phone ROM is kitkat.
How do I do my phone is galaxy note 1(n7000)
Do you only want to use the official TouchWiz ROM and keep your phone's root and custom recovery or should everything be reset to factory state, which means no root, no custom recovery, official ROM and flash counter set to 0?
Anyway, start by downloading the desired firmware from SamMobile.
klenamenis said:
Do you only want to use the official TouchWiz ROM and keep your phone's root and custom recovery or should everything be reset to factory state, which means no root, no custom recovery, official ROM and flash counter set to 0?
Anyway, start by downloading the desired firmware from SamMobile.
Click to expand...
Click to collapse
Yes but I install through recovery mode it says failed in red so what should I do.
Rohangarg4388 said:
Yes but I install through recovery mode it says failed in red so what should I do.
Click to expand...
Click to collapse
So... yes what? Did you get any explicit error message? I recommend flashing stock recovery and rom through odin or heimdall using your pc. Please provide more detailed information on what you want and do so one can help you efficiently.
I gave my wife my GS4 which I had on CM11 and she did not like it as it is constantly dropping her data connection and stopping her texts from sending receiving. I downgraded to CM10.2 and still the same issue. She absolutely hates it, so I am now looking to revert the phone back to 100% original form with stock firmware and ROM.
Is there a guide on XDA for how to do this on an AT&T GS4? I know that I will have to do this through ODIN, but want to make sure that I do everything precisely so that the phone doesn't get bricked.
Can I download the stock MDL ROM from here: sammobile. com/firmwares/3/?download=14623 and just install with supplied instructions via ODIN and be back to stock? Will those go ahead and overwrite CWM bootloader and all of that at the same time?
The phone still has the MDL baseband on it if that helps.
Thanks in advance.
Yes you can d/l the stock mdl rom from sammy and yes it will erase Cwm recovery and replave with stock....after you flash the stock mdl rom be sure to root and freeze the update apps....
dmc2359 said:
Yes you can d/l the stock mdl rom from sammy and yes it will erase Cwm recovery and replave with stock....after you flash the stock mdl rom be sure to root and freeze the update apps....
Click to expand...
Click to collapse
Thanks for the confirmation. Just reverted back and she is already much happier with the stock ROM. Thanks again.
Hi Guys I'm trying to install a custom Rom on my phone but have failed 4 times now and have to reach out to the forum for help. I'm on 4.4.2 ota and have rooted w/ towel root sucessfully, installed safestrap 3.72 and 3.75, busybox and super su. I advance wipe and do a clean install. Everytime it says it was successful but when I reboot the screen goes black and does noting. The phone remains on but nobodys home. I've tried the Jasmine rom and the alliance rom with the same results. I used odin to go back to stock but I want a custom rom. Can anybody help? I've attached a screenshot of my about phone. Also can anybody recommend a Rom that helps with the signal/gps issues that started after KK?
Thanks in Advance!
cjacobs611 said:
Hi Guys I'm trying to install a custom Rom on my phone but have failed 4 times now and have to reach out to the forum for help. I'm on 4.4.2 ota and have rooted w/ towel root sucessfully, installed safestrap 3.72 and 3.75, busybox and super su. I advance wipe and do a clean install. Everytime it says it was successful but when I reboot the screen goes black and does noting. The phone remains on but nobodys home. I've tried the Jasmine rom and the alliance rom with the same results. I used odin to go back to stock but I want a custom rom. Can anybody help? I've attached a screenshot of my about phone. Also can anybody recommend a Rom that helps with the signal/gps issues that started after KK?
Thanks in Advance!
Click to expand...
Click to collapse
You need to flash the NC2 kernel via odin. File and instructions can be found here. When following the steps in the OP you can substitute the rom you want for the one you can download from the post.
Also incase you didn't see it in the Safestrap OP you will only be able to use the stock rom slot, if trying to flash on a created slot it won't boot properly or at all (rom slots are only supported on NC2 firmware and previous, the ota is NC4).
Hope this helps.
That's great thank you very much for your help!
Do I just flash the kernal over my stock rom?
cjacobs611 said:
Do I just flash the kernal over my stock rom?
Click to expand...
Click to collapse
To be safe you might want to flash the rooted stock rom provided in the post I linked earlier. That rom is the NC4 stock with pre-root and a couple other tweaks Basically the same as OTA but better. Just follow the steps in the OP and you'll be good to go (if you haven't already).
thank you
My pleasure.
Ok I'm sorry I'm still confused. The OP doesn't say to flash with Odin anywhere it says flash with Safe strap. Do I flash the firmware with Odin first then Rom?
cjacobs611 said:
Ok I'm sorry I'm still confused. The OP doesn't say to flash with Odin anywhere it says flash with Safe strap. Do I flash the firmware with Odin first then Rom?
Click to expand...
Click to collapse
Anything firmware, kernel or modem related must be flashed in Odin as long as we have a locked bootloader. Just follow the steps as instructed and you'll be fine.
Sent by Darkseid from Apokolips
Hi,
I have rooted and installed TWRP on my 910F Note4 as I was fed up waiting on the lollipop update rolling out. I am currently on 4.4.4 and have made a full backup using TWRP of the stock rom.
My intention was flashing the Cyanogen ROM and using that, but i now see on sammobile there is a stock 5.01 rom available. I have a few questions about this.
1. If I flash to Cyanogen can I still revert back to the stock rom 4.4.4 I have made a backup with? I read somewhere there might be problems as I was on KitKat then moved to lollipop(Cyanogen).
2. Can I flash the stock lollipop rom from within TWRP? Or do you have to do this via ODIN?
3. If I flash the Lollipop stock ROM with Odin I assume I will lose root and TWRP? So this would have to done again?
Guess I am asking what is the best way to proceed?
Thanks again
Paul
pmlfrew said:
Hi,
I have rooted and installed TWRP on my 910F Note4 as I was fed up waiting on the lollipop update rolling out. I am currently on 4.4.4 and have made a full backup using TWRP of the stock rom.
My intention was flashing the Cyanogen ROM and using that, but i now see on sammobile there is a stock 5.01 rom available. I have a few questions about this.
1. If I flash to Cyanogen can I still revert back to the stock rom 4.4.4 I have made a backup with? I read somewhere there might be problems as I was on KitKat then moved to lollipop(Cyanogen).
2. Can I flash the stock lollipop rom from within TWRP? Or do you have to do this via ODIN?
3. If I flash the Lollipop stock ROM with Odin I assume I will lose root and TWRP? So this would have to done again?
Guess I am asking what is the best way to proceed?
Thanks again
Paul
Click to expand...
Click to collapse
hi Paul,
1. i beleve to flash CM from kitkat you will need to install the lollipop bootloader first.
2. You have to flash the stock rom via Odin, you will keep all apps settings and files but you will lose root (you u can re root in 3 minutes)
Best thing you could do is flash the stock rom first with odin, see how that feels (IMO its good been using it for months now) and then root it and back it up and flash CM12 (you dont have to flash any boatloader at this point)
grtz
Luc
Racinghart91 said:
hi Paul,
1. i beleve to flash CM from kitkat you will need to install the lollipop bootloader first.
2. You have to flash the stock rom via Odin, you will keep all apps settings and files but you will lose root (you u can re root in 3 minutes)
Best thing you could do is flash the stock rom first with odin, see how that feels (IMO its good been using it for months now) and then root it and back it up and flash CM12 (you dont have to flash any boatloader at this point)
grtz
Luc
Click to expand...
Click to collapse
Thanks will flash to lollipop today then....
pmlfrew said:
Thanks will flash to lollipop today then....
Click to expand...
Click to collapse
Ok tried to flash Stock O2 UK lollipop ROM via ODIN and got error message on screen. MD5 too big or something. Had to pull battery on phone. Had to then reflash TWRP. Got back into TWRP and tried to do a recovery of the backup I took but phone is stuck at Galaxy note 4 screen. It then shuts down and restarts and gets to the same screen again.
Do I try a different ROM? What can I do?
Thanks
Paul
pmlfrew said:
Ok tried to flash Stock O2 UK lollipop ROM via ODIN and got error message on screen. MD5 too big or something. Had to pull battery on phone. Had to then reflash TWRP. Got back into TWRP and tried to do a recovery of the backup I took but phone is stuck at Galaxy note 4 screen. It then shuts down and restarts and gets to the same screen again.
Do I try a different ROM? What can I do?
Thanks
Paul
Click to expand...
Click to collapse
I got it working by flashing the German non branded ROM... Got the error message again but then used a "All samsung recovery.tar" as stated on another post in here and it booted fine eventually... Now on Lollipop. Now time to flash with TWRP.... Again!!!
Please, i need help !
I need help, urgently !
My Note 4 SM-N910C does not work. I can enter the Recovery and the Download Mode. When attempting to install a Custom ROM gives me an error that says I have no data. In the internal memory I have 0mb.
I tried using odin, but I can not .. Salta error.
Someone who can make a backup of your phone (which is factory), leave me a link to download it? So I install the TWRP. Please.
They have another solution?
Thank you.:good: