My device is Samsung Galaxy SM N9005 Android 4.4.2. Baseband version - (XSP - Region - Singapore, Build data - 20.05.2014) N9005XUENE4_N9005OLCENE5_N9005DXUENE3. When i install another Firmware, my device doesn't understand it, the Baseband version shows unknown, doesn't understand the SIM card signal, and the imei shows 0.
PLEASE HELP ME TO FIX IT !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
timanaru said:
My device is Samsung Galaxy SM N9005 Android 4.4.2. Baseband version - (XSP - Region - Singapore, Build data - 20.05.2014) N9005XUENE4_N9005OLCENE5_N9005DXUENE3. When i install another Firmware, my device doesn't understand it, the Baseband version shows unknown, doesn't understand the SIM card signal, and the imei shows 0.
PLEASE HELP ME TO FIX IT !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Which Firmware did you try to install? According to your problem description you are most likely trying to downgrade, which is not possible under certain circumstances.
Answer
kwayteow said:
Which Firmware did you try to install? According to your problem description you are most likely trying to downgrade, which is not possible under certain circumstances.
Click to expand...
Click to collapse
For example - Build data: 04.03.2014, N9005XXUENC2 KSA (Saudi Arabia) KitKat 4.4.2. The device doesn't understand anything. Is it possible to fix the problem ????
Thank you for answer
timanaru said:
For example - Build data: 04.03.2014, N9005XXUENC2 KSA (Saudi Arabia) KitKat 4.4.2. The device doesn't understand anything. Is it possible to fix the problem ????
Thank you for answer
Click to expand...
Click to collapse
Apparently you can only downgrade AP but not the modem. First flash your new ROM, then flash your current modem version afterwards.
Related
Hello,
I'm a little confused about which region SM-N9005 I have.
In phone settings -> about device it shows:
Model number: SM-N9005
Baseband version: N9005XXUBMI5
Build number: JSS15J.N9005ZHUBMI7
In Kies,
Current firmware version: PDA:MI7 PHONE:MI5 CSC:MI7 (TGY)
Latest firmware version: PDA:MJ8 PHONE:MJ4 CSC:MJ8 (TGY)
After a little research I have found out that TGY is the region code for Hong Kong, and the Build number seems to verify this.
But what about Baseband version? Doesn't XX mean European region?
I bought this phone on eBay. So its quite possible someone fiddled with it to make it work here (BTW I'm in UK).
Can anyone shed any light, before I flash the wrong region firmware via ODIN and brick my phone?
Also I have CF-Auto-Rooted (Thanks Chainfire), which is why I'm not updating through Kies.
Thanks to all in advance,
Jason
jason9 said:
Hello,
I'm a little confused about which region SM-N9005 I have.
In phone settings -> about device it shows:
Model number: SM-N9005
Baseband version: N9005XXUBMI5
Build number: JSS15J.N9005ZHUBMI7
In Kies,
Current firmware version: PDA:MI7 PHONE:MI5 CSC:MI7 (TGY)
Latest firmware version: PDA:MJ8 PHONE:MJ4 CSC:MJ8 (TGY)
After a little research I have found out that TGY is the region code for Hong Kong, and the Build number seems to verify this.
But what about Baseband version? Doesn't XX mean European region?
I bought this phone on eBay. So its quite possible someone fiddled with it to make it work here (BTW I'm in UK).
Can anyone shed any light, before I flash the wrong region firmware via ODIN and brick my phone?
Also I have CF-Auto-Rooted (Thanks Chainfire), which is why I'm not updating through Kies.
Thanks to all in advance,
Jason
Click to expand...
Click to collapse
Here's mine from UK
jaythenut said:
Here's mine from UK
Click to expand...
Click to collapse
Hi,
Thanks for the reply, but I'm still unsure which Region firmware I need to flash. (I'm talking about stock firmware here).
If I flash The Hong Kong firmware, will my phone still work here in the UK? Will it change my phone language to Chinese?
I understand flashing the wrong region for your device could result in a brick. Is this correct?
I really would like a definitive answer before I do something stupid.
Thanks all
Update
Just a quick update..
I read through the entire CF-Auto-Root thread (50 pages!). A couple of posts mentioned that I could update through Kies if I first factory reset my phone.
I did so, and the update succeeded! I then proceeded to CF-Auto-Root again, to regain root access. Joy!
Now my 'About device' screen looks like this:
Baseband version: N9005ZHUDMJ4
Build number: JSS15J.N9005ZHUDMJ8
A couple of questions.
The baseband version is not correct for my region (UK, Europe (XX))
Will this have adverse effects on my connection to networks?
Is it possible to flash only the correct baseband? If so, how?
Thank you all for taking time to help me
jason9 said:
Just a quick update..
I read through the entire CF-Auto-Root thread (50 pages!). A couple of posts mentioned that I could update through Kies if I first factory reset my phone.
I did so, and the update succeeded! I then proceeded to CF-Auto-Root again, to regain root access. Joy!
Now my 'About device' screen looks like this:
Baseband version: N9005ZHUDMJ4
Build number: JSS15J.N9005ZHUDMJ8
A couple of questions.
The baseband version is not correct for my region (UK, Europe (XX))
Will this have adverse effects on my connection to networks?
Is it possible to flash only the correct baseband? If so, how?
Thank you all for taking time to help me
Click to expand...
Click to collapse
Here's mine
Hi Jay,
Thanks for that. But I'm not really sure how that helps me... ?
Please elaborate
jason9 said:
Hi Jay,
Thanks for that. But I'm not really sure how that helps me... ?
Please elaborate
Click to expand...
Click to collapse
Ok go to www.sammobile.com get firmware and download odin 3.09 and flash but don't know if uk firmware will work, if you're phone is working and you got signal don't worry about it just stay how you are
Hi
I just have a quick question regarding installing a 4.4.2 update with a different baseband to what is currently on my sm-n9005 as i am a impatient creature. Will it be possible and will i run into any issues doing this (e.g. modem differences etc) i also plan to install Sweet Rom once i can update the boot loader from 4.4.2
Current device
Baseband- N9005XXUDMJ7 (Saudi region i believe)
Build number- JSS15J.N9005XXUDMJ7
Update details
N9005XXUENB3_N9005OXXENB1_XEO (POLAND)
I have tried to find a answer via the almighty google but couldn't find a similar situation, any help greatly appreciated!!!!!
pavlo89 said:
Hi
I just have a quick question regarding installing a 4.4.2 update with a different baseband to what is currently on my sm-n9005 as i am a impatient creature. Will it be possible and will i run into any issues doing this (e.g. modem differences etc) i also plan to install Sweet Rom once i can update the boot loader from 4.4.2
Current device
Baseband- N9005XXUDMJ7 (Saudi region i believe)
Build number- JSS15J.N9005XXUDMJ7
Update details
N9005XXUENB3_N9005OXXENB1_XEO (POLAND)
I have tried to find a answer via the almighty google but couldn't find a similar situation, any help greatly appreciated!!!!!
Click to expand...
Click to collapse
Shouldn't be any issues flashing KK via Odin. -- So long as your note is not a Hong Kong variant. (which yours appears to not be)
radicalisto said:
Shouldn't be any issues flashing KK via Odin. -- So long as your note is not a Hong Kong variant. (which yours appears to not be)
Click to expand...
Click to collapse
Thank you for clarifying
...
randomid4 said:
Hey guys..
So I was trying to install a Korean Note 3 4.2.2 firmware (SM-N900S) on my Australian Note 3 (SM-N9005) using ODIN but was a failure.. It wouldn't proceed, saying "failed" so I gave up and instead of that I've installed UK Note 3 4.2.2 (SM-N9005)..
But I still want to install Korean firmware on my phone!!
So does anyone have any idea why this was a failure??
Is it because the model name is different?? (Will changing the model name by rooting help?)
From my past experience, I was able to install international firmware even without changing the model name..
About my device:
AP: N9005XXUEND3
CP: N9005XXUENC2
CSC: N9005OXAEND1
If you need any information about my phone (version etc.) Please ask!!
So I'm currently on UK BTU 4.2.2 (SM-N9005) and trying to install Korean SKT 4.2.2 (SM-N900S).
*This isn't a custom rom!!
Please help..
Thanks!!
Click to expand...
Click to collapse
The boot sequence in modern phones is secure/restricted (and Odin also tries to enforce it even before the boot - to stop you from writing bad stuff).
Basically the bootloader is different (something that you can also see even on the same N9005 model when going from 4.3 to 4.4 - 4.4 does not work with old 4.3 bootloader and currently there is a restriction which stops you from downgrading the bootloader).
...
randomid4 said:
But I'm not trying to downgrade.. Will it still not work..?
Also then, is there any other way to break this restriction?
Click to expand...
Click to collapse
No, you can't flash Korean rom on your N89005...
I have samsung note 3 SM-N9005
Firmware Version Info
(PDA: N9005ZHUENH4 CSC: N9005ZZHENH4 MODEM: N9005ZHUENH4 CHANGELIST: 2538583 BUILD DATE: 19.08.2014)
its give network issue....
there are full network out of home and in home only 1-2 bar of network signal .
help me..
Can i install any other Indian Firmware Version to solve this problem ?
greenlight093 said:
I have samsung note 3 SM-N9005
Firmware Version Info
(PDA: N9005ZHUENH4 CSC: N9005ZZHENH4 MODEM: N9005ZHUENH4 CHANGELIST: 2538583 BUILD DATE: 19.08.2014)
its give network issue....
there are full network out of home and in home only 1-2 bar of network signal .
help me..
Can i install any other Indian Firmware Version to solve this problem ?
Click to expand...
Click to collapse
Head over to samobile and download a new version of your Firmware and flash it with ODIN. Just search the forums on ODIN and you'll find a lot of tutorials.
BunnyPig said:
Head over to samobile and download a new version of your Firmware and flash it with ODIN. Just search the forums on ODIN and you'll find a lot of tutorials.
Click to expand...
Click to collapse
thanks for reply
i have 2 questions.
1) which Indian firmware version i should install. i dont know which is letest currently i have N9005ZZHENH4 version..
2) After flashing with indian version network weak problem will solve ?
reply please
greenlight093 said:
thanks for reply
i have 2 questions.
1) which Indian firmware version i should install. i dont know which is letest currently i have N9005ZZHENH4 version..
2) After flashing with indian version network weak problem will solve ?
reply please
Click to expand...
Click to collapse
1) In the Phone INFO ★Samsung★ app, open the Menu > 'Firmware Browser', you will get the latest firmware for your device (the latest one is on the top of the list).
2) In theory the answer should be Yes but it may depend on many other factors..
Which version i should install.
i have hongkong version pre installed..
i want to install indian.
give me link plz
Which version i should install.
i have hongkong version pre installed..
i want to install indian.
give me link plz
But you won't get more signal bars at home... If this is your only problem, leave it. I guess you will screw something up flashing your phone.
Sent from my N9005
greenlight093 said:
Which version i should install.
i have hongkong version pre installed..
i want to install indian.
give me link plz
Click to expand...
Click to collapse
Unfortunately Hongkong device is not compatible with another firmware. If you want to flash Indian firmware over your Hong Kong device, you should flash with the PIT file.
Sent from my SM-N9005 using Tapatalk
Yes I m ready to do with the PIT files.
just give me full steps.. and download links ...
i m doing this only for solve issue "my poor network in my home....& full network out side home. "
greenlight093 said:
thanks for reply
i have 2 questions.
1) which Indian firmware version i should install. i dont know which is letest currently i have N9005ZZHENH4 version..
2) After flashing with indian version network weak problem will solve ?
reply please
Click to expand...
Click to collapse
Ohh My God, u will brick your phone, there is NO SM-N 9005 For India at all how u will get Indian firmware? read more before u play with your working phone .
thanks for reply.,. but i m swear network loss in home is firmware problem .. what is another way..
i cant take it to service center .. phone is fake.... not original i checked in Phone INFO ★Samsung★.
there is another way to connect note 3 N9005 to pc via our normal charger's usb cable ?
Hello i have a Samsung galaxy note 3 on three network , i am new to all this and i have googled my question many times only to become more confused. I was curious when my phone will get the lollipop update for uk phone. Future thanks to anyone who can give me any information. P.s im not rooted
zaravacher said:
Hello i have a Samsung galaxy note 3 on three network , i am new to all this and i have googled my question many times only to become more confused. I was curious when my phone will get the lollipop update for uk phone. Future thanks to anyone who can give me any information. P.s im not rooted
Click to expand...
Click to collapse
Hi,
What model of phone do you have? The LTE SM-N9005? If so (and I hope someone could either second this or correct me if i'm wrong) I believe you could flash via odin (and you do not need to be rooted to do this) the lollipop update that O2 has. 5.0 is available for the UK via the sammobile website, so if the basebands remain the same and the phone is the same model, I believe you could just download the 5.0 update from sammobile and flash it via odin.
Since you would be flashing an official version of sammy's rom, you won't need to be rooted, nor have a custom recovery.
Cheers
zaravacher said:
Hello i have a Samsung galaxy note 3 on three network , i am new to all this and i have googled my question many times only to become more confused. I was curious when my phone will get the lollipop update for uk phone. Future thanks to anyone who can give me any information. P.s im not rooted
Click to expand...
Click to collapse
We need know your model and firmware that you are using. Install this APP and add some screenshots here.
reply
Ok phone model is SM-N9005 And firmware is N9005xxugng1
zaravacher said:
Ok phone model is SM-N9005 And firmware is N9005xxugng1
Click to expand...
Click to collapse
so, you are using the sm-n9005, and the firmware u have is the same one as the firmware that the 02 UK version runs in 4.4.2.
Unless I'm mistaken, and if anyone sees I am please correct me, you could flash the 5.0 version with odin for o2 UK. I don't see why it wouldn't work, since it seems you have the same phone and firmware currently in 4.4.2
cheers
zaravacher said:
Ok phone model is SM-N9005 And firmware is N9005xxugng1
Click to expand...
Click to collapse
Your device is using of UK (with CSC: BTU). It still without Lollipop update. I recommend don't flash via ODIN any firmware and wait for future updates (via OTA) if you aren't rooted.
zaravacher said:
Ok phone model is SM-N9005 And firmware is N9005xxugng1
Click to expand...
Click to collapse
You have
Model SM-N9005 Model name GALAXY Note 3 LTE Country United Kingdom Version Android 4.4.2 Changelist 1955971 Build date Mon, 28 Jul 2014 12:56:29 +0000 Product code BTU PDA N9005XXUGNG1 CSC N9005OXAGNJ3
BTU no current update and likely to skip to the next build of Android .
O2 UK firmware can be used on this phone flashed via Odin .
http://www.sammobile.com/firmwares/download/45137/N9005XXUGBOB6_N9005O2UGBOC1_O2U/