Please see the images attached.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am trying to get back to unroot state on my galaxy s4 i9505. It is running fine and shows I have signal but will not make any connection when trying to connect to Vodafone UK. I am not tlk sure if I need to flash anything with the CSC?? The phone will just not register on Vodafone UK or any other network (it is an unlocked phone) I think j may have flashed the wrong firmware somewhere. I also bought in the UK but suggests otherwise?
Please help me to get back to getting signal and restoring the phone! Its driving me crazy! Please ask me anything else if have any questions. I have my imei number which I haven't shown which links to the label under the battery so that seems to be ok.
Thanks in advanced
Sent from my One using Tapatalk
1. Install Kies 3 and plug in ur phone.
2. Take a look the CSC in Kies 3 (pic 1 attached)
3. Go to Sammobile.com and download the correct firmware for ur device (knowing now ur correct CSC).
4. Unzip it and flash the firmware (.tar file) through ODIN.
mattcops said:
Please see the images attached.
images removed
I am trying to get back to unroot state on my galaxy s4 i9505. It is running fine and shows I have signal but will not make any connection when trying to connect to Vodafone UK. I am not tlk sure if I need to flash anything with the CSC?? The phone will just not register on Vodafone UK or any other network (it is an unlocked phone) I think j may have flashed the wrong firmware somewhere. I also bought in the UK but suggests otherwise?
Please help me to get back to getting signal and restoring the phone! Its driving me crazy! Please ask me anything else if have any questions. I have my imei number which I haven't shown which links to the label under the battery so that seems to be ok.
Thanks in advanced
Sent from my One using Tapatalk
Click to expand...
Click to collapse
I'm sure you thought of this but have you checked your APN Settings?
For Vodafone UK check this link: http://apn-settings.com/uk/vodafone-uk-apn-settings/
Joku1981 said:
1. Install Kies 3 and plug in ur phone.
2. Take a look the CSC in Kies 3 (pic 1 attached)
3. Go to Sammobile.com and download the correct firmware for ur device (knowing now ur correct CSC).
4. Unzip it and flash the firmware (.tar file) through ODIN.
Click to expand...
Click to collapse
I have plugged into kies3 and it does not display any information about my csc? Please could you help?
See attached photo.
Diger36 said:
I'm sure you thought of this but have you checked your APN Settings?
For Vodafone UK check this link: http://apn-settings.com/uk/vodafone-uk-apn-settings/
Click to expand...
Click to collapse
Yes I have checked APN settings, unfortunately still not working
I managed to find a csc by typing *#1234# see attached picture.
So, with the information I have found, would this be the correct firmware for my mobile? slovenia?
http://www.sammobile.com/firmwares/3/?download=30797
Seems to be correct, I may go ahead and flash it. Am i correct I just load into pip on odin and flash?
mattcops said:
Yes I have checked APN settings, unfortunately still not working
I managed to find a csc by typing *#1234# see attached picture.
So, with the information I have found, would this be the correct firmware for my mobile? slovenia?
http://www.sammobile.com/firmwares/3/?download=30797
Seems to be correct, I may go ahead and flash it. Am i correct I just load into pip on odin and flash?
Click to expand...
Click to collapse
You don't need reflash it coz seems to be correct. Try first to:
1. Make a backup of your Internal Memory folders to ur pc.
2. Factory reset ur phone (Settings > Accounts > Back Up and Reset > Factory Data Reset > Reset Device > Delete All/Erase Everything.)
3. Tell me how it worked :fingers-crossed:
Joku1981 said:
You don't need reflash it coz seems to be correct. Try first to:
1. Make a backup of your Internal Memory folders to ur pc.
2. Factory reset ur phone (Settings > Accounts > Back Up and Reset > Factory Data Reset > Reset Device > Delete All/Erase Everything.)
3. Tell me how it worked :fingers-crossed:
Click to expand...
Click to collapse
really appreciate you trying to help Joku, but I have tried factory resetting 3 times now, and still will not register on Vodafone UK What am I doing wrong!! Is it because I have flashed the Vodafone uk firmware instead of the Slovenia version which apparently is what my phone is? (I bought from amazon uk, I thought it would have been uk unlocked)
mattcops said:
really appreciate you trying to help Joku, but I have tried factory resetting 3 times now, and still will not register on Vodafone UK What am I doing wrong!! Is it because I have flashed the Vodafone uk firmware instead of the Slovenia version which apparently is what my phone is? (I bought from amazon uk, I thought it would have been uk unlocked)
Click to expand...
Click to collapse
flashed the slovenia version and still not connecting to Vodafone UK. have I got the wrong baseband?! I really can't think of what to do next and currently left with an expensive brick or a phone which can download apps but can't phone or text!!
Sent from my One using Tapatalk
Still haven't fixed this and left with a phone that's gets no signal and doesn't connect to data apart from WiFi!
mattcops said:
Still haven't fixed this and left with a phone that's gets no signal and doesn't connect to data apart from WiFi!
Click to expand...
Click to collapse
Dial again *#1234# and attach what appears.
Joku1981 said:
Dial again *#1234# and attach what appears.
Click to expand...
Click to collapse
I hope these images help. Let me fill you in on what I have *tried* to do to help.
I have inserted a Vodafone UK contract sim. I have flashed Vodafone firmware and now changed the CSC code to VOD (Vodafone UK... I think) so I just thought my sim card would be working again.... Still shows signal bars but does not connect to network or wireless now... Can it be something to do with my modem???? Does anything stick out to anyone that is wrong???
Just to say my imei no and serial no are still intact I have not lost them or they have not gone to 0... They match to sticker behind battery. I just cannot work out what is wrong
Please help people! I appreciate it! [emoji4]
any help would be appreciated!! it's driving me crazy
please, i am still stuck with this phone!
Related
Hi guys,
I think I was messing around where I shouldn't have been and now I have 2 SIMs from 2 different providers down on my unlocked rooted W8. I had moved it back to XtreStoLite successfully and then for some reason I started exploring service codes and I think thats where I killed it. I've completely formatted both drives and reinstalled factory but I'm still getting the same result. The Bell SIM just says Emergency Calls only and then you go into the networking area and it says Insert SIM for network services. The Koodo SIM gets a totally different result as its getting the PUK-locked.
Any wonderful ideas?
Thanks a million.
Tony
Estrongs and CSC folder attached in zip format
Does anyone have any ideas on this? I got the PUK-Unlocked taken care of on one SIM only to end up with the same problems on both SIMs. The SIMs still show as unlocked as per CSC but the status is LIMITED.
I think what I need to do is blow away the CSC so any remaining tainted records are gone.... somehow without breaking the unlock. I guess this doesn't get wiped even when I'm in PHILS and highlighting and formatting everything and then reinstalling factory firmware from SAMMOBILE. I've tried updating Bootloader, Modem and then firmwares several times. I've been to the shop that unlocked my phone and they say well if its not asking for a code its still unlocked. I've talked to the PUK detective at Koodo. I've been to the Bell store only to be sent out the door in a rude manner.
I think what I need to do is reset part of the service code that contains SIM stuff.
Any guru can help me PLEASE???
Below is more descriptive info with screenshots of the issue and my troubleshooting.
Thanks,
Tony
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://imageshack.com/a/img674/2472/6GqoAA.png
@AltaEgo
Not sure why did you attached the Estrongs folder?
Did you try to flash stock firmware? Are your IMEI and baseband still valid?
And please check the following:
open Dialer, enter *#0011#, Menu, Back item, Menu, Key Input, enter Q0 and OK, wait for some seconds until you get MAIN MENU. Then select DEBUG SCREEN > NAS INFORMATION > MM INFORMATION > capture this screenshot. And then Menu, Back item, MM REJECT CAUSE and also capture screenshot.
Can you show these 2 screenshots?
vndnguyen said:
@AltaEgo
Not sure why did you attached the Estrongs folder?
Did you try to flash stock firmware? Are your IMEI and baseband still valid?
And please check the following:
open Dialer, enter *#0011#, Menu, Back item, Menu, Key Input, enter Q0 and OK, wait for some seconds until you get MAIN MENU. Then select DEBUG SCREEN > NAS INFORMATION > MM INFORMATION > capture this screenshot. And then Menu, Back item, MM REJECT CAUSE and also capture screenshot.
Can you show these 2 screenshots?
Click to expand...
Click to collapse
---------------
Hi vndnguyen,
My IMEI LOOKS ok and my baseband does too but I'm just look at the About Phone>Status .
I'm not sure why I put the estrongs folder in there. Sorry, I was up for many hours straight trying to fix this. I used your Samsung Info folder to try many different codes with no luck. In this situation, you get the no sim error when you try to put a service code in the dialer so its necessary to root the phone and launch them your app. It seeps for whatever reason that the SIM is deregistered and almost not seen at all. One SIM I can get a little bit further than the other. I have tried restoring two different firmwares from Sammobile and also one with Kies, but NO LUCK.
I really hope you can help. I'll be so grateful. Even the provider wasn't helpful.
Thanks very much for your assistance.
Tony
https://www.dropbox.com/s/6q3liiwnqtgdh4a/2014-11-17 16.47.46.png?dl=0
https://www.dropbox.com/s/n554ict5zfj0r60/2014-11-17 16.47.58.png?dl=0
https://www.dropbox.com/s/o7yqtv574i1g7rx/2014-11-17 16.48.15.png?dl=0
https://www.dropbox.com/s/2enowxuhns4c1gn/2014-11-17 16.48.24.png?dl=0
https://www.dropbox.com/s/72ggwip7nztutjz/2014-11-17 16.48.36.png?dl=0
https://www.dropbox.com/s/nkl3l94e5cmdpsf/2014-11-17 16.49.10.png?dl=0
https://www.dropbox.com/s/p72el25pfu8wvcp/2014-11-17 16.50.15.png?dl=0
https://www.dropbox.com/s/yj3s1cobpxhaosy/2014-11-17 16.50.30.png?dl=0
https://www.dropbox.com/s/u1kmncey28iv0cx/2014-11-17 16.50.46.png?dl=0
https://www.dropbox.com/s/jamfcbnhr3va60u/2014-11-17 16.51.09.png?dl=0
https://www.dropbox.com/s/rhqqjfb57b1j1ce/2014-11-17 16.55.48.png?dl=0
https://dl.dropboxusercontent.com/u/100918384/S5-T2Y_NETWORK_ISSUES.zip
https://www.dropbox.com/s/bjlwhikvrhn7zcz/2014-11-17%2020.43.52.png?dl=0
Does anyone have any ideas? I've been down for 7 days now.
Much appreciated.
AltaEgo said:
https://www.dropbox.com/s/bjlwhikvrhn7zcz/2014-11-17%2020.43.52.png?dl=0
Does anyone have any ideas? I've been down for 7 days now.
Much appreciated.
Click to expand...
Click to collapse
According to the screenshots, the problem was that the network consider your phone as a illegal device. The network refuses service either because an ID of your device is not acceptable, or because the device does not pass the authentication check.
So please check:
1- Put your SIM card into another phone to make sure it works fine?
2- Make sure your phone's IMEI is not blacklisted?
vndnguyen said:
According to the screenshots, the problem was that the network consider your phone as a illegal device. The network refuses service either because an ID of your device is not acceptable, or because the device does not pass the authentication check.
So please check:
1- Put your SIM card into another phone to make sure it works fine?
2- Make sure your phone's IMEI is not blacklisted?
Click to expand...
Click to collapse
Thank you. This is very confusing as I got my S5 as new. I spent another 40 minutes with Bell on the phone tonight and they certainly didn't mention anything of the sort. I'll try these and then get back to you.
Thanks!
Tony
Well I've tried reinstalling stock and complying with Knox with no luck. I've tried completely blowing away everything to do with Knox after wiping EVERYTHING and reinstalling appropriate boatloads, kernel, modem.
I'm at Bell now. Gonna ask why the hell I've talked to 3 CRTs on the phone and in another store and Knox WASNT EVEN MENTIONED!
Sent from my SM-G900F using XDA Premium 4 mobile app
If your warrenty is void (knox tripped), you could risk it and try to add all bands to your phone. Maybe it could reset something?
http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
Blazing angel said:
If your warrenty is void (knox tripped), you could risk it and try to add all bands to your phone. Maybe it could reset something?
http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
Click to expand...
Click to collapse
I got the phone replaced through my smartphone insurance package. Luckily I don't have to pay the normal 150 deductible because my S5 was an insurance replacement and within its warranty. As far as the 0x1 causing warranty to be void, I highly doubt that crap will stand up in court. Because you install a custom recovery to BACKUP your phone for recovery, your warranty is void? That's a loud of sh*t! I think that all of us Samsung customers should put together a petition letter expressing our displeasure with Knox. I mean, it doesn't really do anything for us unless you're with a corporation or you pay for one of the upgraded copies. I can't even figure out how to login to Knox on my insurance replacement but it's there and running.... well it was. lol
I'd really like to find out what happened to this phone before I send it back. I think I might try adding the bands.
Anyone else have any ideas as how to reset the Qualcomms through the service menu. I suspect that this is totally separate from Android and that in here is where I messed something up that tripped up the modem settings so it won't read SIM cards. I want to reset the Qualcomm back to factory defaults.
Facing Problem at power on Wifi
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
najrazlug said:
Facing Problem at power on Wifi
Click to expand...
Click to collapse
Factory reset your device (Settings > Accounts > Back Up and Reset > Factory Data Reset > Reset Device > Delete All/Erase Everything.)
Joku1981 said:
Factory reset your device (Settings > Accounts > Back Up and Reset > Factory Data Reset > Reset Device > Delete All/Erase Everything.)
Click to expand...
Click to collapse
Erased and reset everything acording to your comand ....
What Is Next ?
najrazlug said:
Erased and reset everything acording to your comand ....
What Is Next ?
Click to expand...
Click to collapse
Install this APP and add some screenshots.
Screen Shoots
Joku1981 said:
Install this APP and add some screenshots.
Click to expand...
Click to collapse
Take a look: HERE. Your IMEI is blacklisted with the company Telus (Canada).
IMEI Is not original ,am askinn about WIFI
Joku1981 said:
Take a look: HERE. Your IMEI is blacklisted with the company Telus (Canada).
Click to expand...
Click to collapse
IMEI Is not original it was written by Octops support shared certificates
IMEI WAS null at that point wifi was no working ....
iwifi problem du imei blacklisted ?
najrazlug said:
IMEI Is not original it was written by Octops support shared certificates
IMEI WAS null at that point wifi was no working ....
iwifi problem du imei blacklisted ?
Click to expand...
Click to collapse
Wipe all and reflash the same firmware or directly flash android 5.0 Lolipop: HERE.
ok Sir
as u said reflash with same firmware ..... phone in same condition
Now Going to flash With XEO 5.0 ...
In Addition let me infrom you ...phone's CSC Code is unknown ....
in start the phone CSC COD WAS XEO ,But baseband was unknown and wifi was working ....
By Wrting another efs phone PHONE ON RECOVERY SAYS (E: FAILD TO Mount efs .) ..like this ....but at that poing WIFI WAS WORKING....
tHEN I FLASH TO 5.0 AND THENDOWNGRADE AFTER THAT wifi is not working
najrazlug said:
as u said reflash with same firmware ..... phone in same condition
Now Going to flash With XEO 5.0 ...
In Addition let me infrom you ...phone's CSC Code is unknown ....
in start the phone CSC COD WAS XEO ,But baseband was unknown and wifi was working ....
By Wrting another efs phone PHONE ON RECOVERY SAYS (E: FAILD TO Mount efs .) ..like this ....but at that poing WIFI WAS WORKING....
tHEN I FLASH TO 5.0 AND THENDOWNGRADE AFTER THAT wifi is not working
Click to expand...
Click to collapse
Ahhhhhhhhhhhh, only you will have to reflash android 5.0 again coz your bootloader is updated.
Joku1981 said:
Ahhhhhhhhhhhh, only you will have to reflash android 5.0 again coz your bootloader is updated.
Click to expand...
Click to collapse
brother i have the exact same problem i updated to BOB6 today and my wifi is not turning on please help
Hi, guys. I have a 1 year old I9505. It started loosing network coverage without any reason. It was originally with Touchwiz 5.0.1 when the problem started. I installed Cyanogenmod 13 (Android 6.0.1) to try if the problem is in the OS, everything working, but the problem continues.
I leave it on the table working (with coverage) and some time after that I turn the screen on and I see an "x" over the mobile network indicator and there is no network. Only restart solves the problem, but not every time. Sometimes i keep on restarting the phone in order to get network coverage. I miss phone calls.
I told myself, when restart solves the problem, maybe I can restart the mobile/radio service without restarting the phone. I installed some apps from the play store, which reset the network coverage. No success. When I have coverage, they do reset it and reconnect. But when the coverage is lost (with an ''x''), those apps do nothing!
How can I restart the SIM card module/service?
It is a hardware problem? But if it is, how does a restart sometimes help?
PS: if i toggle airplane mode (when I have the "x" thing), then i cannot turn the airplane mode back off!
Could be your SIM is acting up.
GDReaper said:
Could be your SIM is acting up.
Click to expand...
Click to collapse
Tried with another SIM card, same thing.
Modem
deianr said:
Tried with another SIM card, same thing.
Click to expand...
Click to collapse
What modem version do you use?
qosmio- said:
what modem version do you use?
Click to expand...
Click to collapse
i9505xxuhob7
Tried stock rom from sam mobile.
I was with stock when the problem started.
I suspect the sim card reader.
Bro I mean flash again stock via odin if you know.5th month ago same issue with me.solved after latest firmware fro sam.good luck
i9505xxuhob7 is from a dutch firmware, flash your own country's firmware, the latest if possible. 9 out of 10 this problem will be solved by flashing original firmware as mentioned by other users before me.
OK, I'll try, but it worked 1 year with this firmware. Without any update, it started to make the problem. That's why I don't suspect the firmware it was with during this year.
deianr said:
OK, I'll try, but it worked 1 year with this firmware. Without any update, it started to make the problem. That's why I don't suspect the firmware it was with during this year.
Click to expand...
Click to collapse
Maybe your provider did change something on the network or something happend with your efs directory.
Good luck.
Qosmio- said:
Maybe your provider did change something on the network or something happend with your efs directory.
Good luck.
Click to expand...
Click to collapse
Thanks, man.
Phone has IMEI. I suppose no efs problem.
I changed the SIM card with new original micro-SIM. I've installed the newest modem I've found (again). Still no difference.
There is a difference in the behavior when there is no SIM at all and when there is SIM inserted, but no network.
When it looses network coverage:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SIM card info app - screenshots:
With normal network coverage:
Lost coverage - SIM card status is "ОК", everything else - not available:
When I take out the SIM card - SIM not detected:
I see that when it looses network coverage, SIM card number is not seen in the app. So maybe it cannot read the SIM card. But SIM status is OK - maybe this is a flag when just SIM is inserted.
deianr said:
Thanks, man.
Phone has IMEI. I suppose no efs problem.
I changed the SIM card with new original micro-SIM. I've installed the newest modem I've found (again). Still no difference.
There is a difference in the behavior when there is no SIM at all and when there is SIM inserted, but no network.
When it looses network coverage:
SIM card info app - screenshots:
With normal network coverage:
Lost coverage - SIM card status is "ОК", everything else - not available:
When I take out the SIM card - SIM not detected:
I see that when it looses network coverage, SIM card number is not seen in the app. So maybe it cannot read the SIM card. But SIM status is OK - maybe this is a flag when just SIM is inserted.
Click to expand...
Click to collapse
You have tried other modem now, did you flash also and try original firmware from your provider so not from xda? If not try that, if not ok try using other sim from friend or someone else other then yours, if that is working then you know something is wrong with your sim, if not i am out of option and it could be your sim reader.
good luck.
Nothing. New SIM, original firm, I even tried this:
http://forum.xda-developers.com/galaxy-s4-att/general/how-to-fix-galaxy-s4-sim-card-removed-t3113480
still doesn't work. Powers up with network, wants my PIN code and a few minutes after that - gone.
deianr said:
Nothing. New SIM, original firm, I even tried this:
http://forum.xda-developers.com/galaxy-s4-att/general/how-to-fix-galaxy-s4-sim-card-removed-t3113480
still doesn't work. Powers up with network, wants my PIN code and a few minutes after that - gone.
Click to expand...
Click to collapse
Sorry to hear that nothing worked out for you, i am afraid that you have a hardware problem.
Not really sure when it happened (probably while I was playing around with different custom roms) but my phone managed to lose all private data as well as the ability to "see" what's installed on it.
I can't see my Baseband, Hardware or Software version, IMEI and even MSL is not working.
I can't perform ##RTN# or ##SCRTN# and if I switch to dm+adb+modem DFS doesn't want to connect to it (it doesn't see it on its port).
Also, phone is not recognized by the computer when it's booted but it is in the TWRP recovery.
If I try to ODIN a Lollipop STOCK rom it won't boot, but I can install a Lollipop that's TWRP compatible.
I do have a backup of the efs partition as well as m9kefs1-3 but restoring them didn't change anything.
I've even copied all the partitions from another Sprint S4 (including the system) and replaced them trough the terminal in TWRP but no luck.
I'm out of ideas.
Any help is appreciated.
djuka007 said:
Not really sure when it happened (probably while I was playing around with different custom roms) but my phone managed to lose all private data as well as the ability to "see" what's installed on it.
I can't see my Baseband, Hardware or Software version, IMEI and even MSL is not working.
I can't perform ##RTN# or ##SCRTN# and if I switch to dm+adb+modem DFS doesn't want to connect to it (it doesn't see it on its port).
Also, phone is not recognized by the computer when it's booted but it is in the TWRP recovery.
If I try to ODIN a Lollipop STOCK rom it won't boot, but I can install a Lollipop that's TWRP compatible.
I do have a backup of the efs partition as well as m9kefs1-3 but restoring them didn't change anything.
I've even copied all the partitions from another Sprint S4 (including the system) and replaced them trough the terminal in TWRP but no luck.
I'm out of ideas.
Any help is appreciated.
Click to expand...
Click to collapse
Install stock tar in Odin. Boot to recovery then wipe internal SD and do a factory reset. That should allow it to boot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Been there, done that. I can boot stock KitKat nut I can't boot stock Lollipop even with the factory reset. It just goes into a bootloop. Not sure that would change anything.
I can't explain how is it possible to replace the data on every partition from the working phone and still have a "broken" phone.
Is there any other memory on S4 that is not accessible?
From what I can see it seems that modem and system are not communicating - case in point, even if I put my phone in the airplane mode when I look at the battery consumption I can see that "cell standby" percent constantly increases. In the airplane mode this should be off, right?
Also, is there a way to see if the modem is functioning properly or it might be damaged?
djuka007 said:
From what I can see it seems that modem and system are not communicating - case in point, even if I put my phone in the airplane mode when I look at the battery consumption I can see that "cell standby" percent constantly increases. In the airplane mode this should be off, right?
Also, is there a way to see if the modem is functioning properly or it might be damaged?
Click to expand...
Click to collapse
I mean if you have service it's working, but other than that the only thing you can do is flash the stock tar. Putting it in airplane mode forces it into Cell Standby btw.
bilgerryan said:
I mean if you have service it's working, but other than that the only thing you can do is flash the stock tar. Putting it in airplane mode forces it into Cell Standby btw.
Click to expand...
Click to collapse
That's the whole point, I don't have service. I'm in Europe now, had my phone internationally unlocked, everything worked fine but now the system doesn't see the SIM card at all. It doesn't even report it as "Wrong SIM card" it just doesn't register it.
I've flashed a stock rom *NAE* and upgraded it (without a problem) trough OTA all the way to GPL1 (NAE-NG2-OD2-OH1-OK3-PI2-PL2) - six updates, problem stays the same. All the time I have the system as "Samsung Official", no suggestions what might be wrong.
And why, oh why, system doesn't want to accept my MSL when I try to do the ##RTN# or ##DATA# edit. I doesn't matter what number I put in, I still can't press OK. And ##MSL# "reacts" but does nothing.
djuka007 said:
That's the whole point, I don't have service. I'm in Europe now, had my phone internationally unlocked, everything worked fine but now the system doesn't see the SIM card at all. It doesn't even report it as "Wrong SIM card" it just doesn't register it.
I've flashed a stock rom *NAE* and upgraded it (without a problem) trough OTA all the way to GPL1 (NAE-NG2-OD2-OH1-OK3-PI2-PL2) - six updates, problem stays the same. All the time I have the system as "Samsung Official", no suggestions what might be wrong.
And why, oh why, system doesn't want to accept my MSL when I try to do the ##RTN# or ##DATA# edit. I doesn't matter what number I put in, I still can't press OK. And ##MSL# "reacts" but does nothing.
Click to expand...
Click to collapse
Sounds like it might be a hardware problem then, if the software is completely stock that usually indicates it is hardware. Maybe your SIM reader or the SIM card itself is damaged.
bilgerryan said:
Sounds like it might be a hardware problem then, if the software is completely stock that usually indicates it is hardware. Maybe your SIM reader or the SIM card itself is damaged.
Click to expand...
Click to collapse
Whatever it is, seems like the modem is dead (or there's no way to communicate with him).
I thought that AT commands might do but I can't reach it from the computer either. Tried DM+MODEM+ADB, RNIDS+DM+MODEM but it doesn't give me any reply. It is recognized in the Device Manager, but when I go to Properties\Diagnostics and then "Query Modem" I get - "The modem failed to respond".
I've tried changing UART between PDA and CDMA (AP/CP) but there's no difference.
I've bought a new phone, can't go around without one, this is kind of a side project now to see what I can learn but it will probably be sold for parts (it's not worth fixing it). Shame.
If you guys have any additional ideas, let me know, now I can experiment all I want.
Cheers!
Hi Guys,
I am stuck in a strange problem with my Note 4.
My reliance Jio SIM card wont connect to Mobile Data at all. Though it shows volte icon, there is no 4G packet switch indicator next to it. In Settings > About Phone > Status, it shows Mobile Network State = Disconnected.
I have deleted and re-entered the APN settings, restarted the phone several times, erased everything and flashed stock ROM, etc. I have also ticked "Aggressive wifi to mobile data handover" in Developer Settings; have tried it all but nothing works. When I enable mobile data and then when I go into Settings > About Phone > Status to check, it doesn't even show a "Connecting" attempt. It just remains "Disconnected" all the time.
Surprisingly, when I insert a different SIM (vodafone for example), it works straight away. However if I try this same Jio network SIM in an iPhone, it shows LTE and connects to mobile data instantly. So I know for sure that there's nothing wrong with the SIM nor with the phone. I thought it could be due to modem so I reflashed the whole stock ROM but it still wont work.
Please advise what are my options.
Bump! Anyone please?
lifehijack said:
Hi Guys,
I am stuck in a strange problem with my Note 4.
My reliance Jio SIM card wont connect to Mobile Data at all. Though it shows volte icon, there is no 4G packet switch indicator next to it. In Settings > About Phone > Status, it shows Mobile Network State = Disconnected.
I have deleted and re-entered the APN settings, restarted the phone several times, erased everything and flashed stock ROM, etc. I have also ticked "Aggressive wifi to mobile data handover" in Developer Settings; have tried it all but nothing works. When I enable mobile data and then when I go into Settings > About Phone > Status to check, it doesn't even show a "Connecting" attempt. It just remains "Disconnected" all the time.
Surprisingly, when I insert a different SIM (vodafone for example), it works straight away. However if I try this same Jio network SIM in an iPhone, it shows LTE and connects to mobile data instantly. So I know for sure that there's nothing wrong with the SIM nor with the phone. I thought it could be due to modem so I reflashed the whole stock ROM but it still wont work.
Please advise what are my options.
Click to expand...
Click to collapse
1st option is tell us your model .
2nd option is go to settings take a screenshot of about device and upload it here
Be more specific to help us understand we love to help but we are not gods.
Sorry about that. It's N910G full stock.
I recently tried an older modem but didn't work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
lifehijack said:
Sorry about that. It's N910G full stock.
I recently tried an older modem but didn't work.
View attachment 4257646
Click to expand...
Click to collapse
I suggest you download and flash stock firmware from link below.
You must have "INU" indian CSC for IMS settings to get volte work.
https://www.sammobile.com/firmwares/galaxy-note4/SM-N910G/INU/download/N910GDTS1DQG2/180867/
Flash firmware then go to recovery and wipe cache/data factory reset/reboot.
Complete setup/set your apn settings correctly.
Try and let me know if it works.
Trex888 said:
I suggest you download and flash stock firmware from link below.
You must have "INU" indian CSC for IMS settings to get volte work.
https://www.sammobile.com/firmwares/galaxy-note4/SM-N910G/INU/download/N910GDTS1DQG2/180867/
Flash firmware then go to recovery and wipe cache/data factory reset/reboot.
Complete setup/set your apn settings correctly.
Try and let me know if it works.
Click to expand...
Click to collapse
I'm already on this one. I have also manually entered apn and ims settings. Still didn't work.
lifehijack said:
I'm already on this one. I have also manually entered apn and ims settings. Still didn't work.
View attachment 4257658
Click to expand...
Click to collapse
I can see your Volte/LTE is already active in screenshot.
Definitely your apn settings is not correct.
Nothing wrong with firmware/modem/csc/bootloader.
Trex888 said:
I suggest you download and flash stock firmware from link below.
You must have "INU" indian CSC for IMS settings to get volte work.
https://www.sammobile.com/firmwares/galaxy-note4/SM-N910G/INU/download/N910GDTS1DQG2/180867/
Flash firmware then go to recovery and wipe cache/data factory reset/reboot.
Complete setup/set your apn settings correctly.
Try and let me know if it works.
Click to expand...
Click to collapse
Trex888 said:
I can see your Volte/LTE is already active in screenshot.
Definitely your apn settings is not correct.
Nothing wrong with firmware/modem/csc/bootloader.
Click to expand...
Click to collapse
I've installed the apn settings i received via sms as well as manually entered the apn too. I even called the network provider to verify the settings. The apn is jionet. Not sure what else can i try.
lifehijack said:
I've installed the apn settings i received via sms as well as manually entered the apn too. I even called the network provider to verify the settings. The apn is jionet. Not sure what else can i try.
View attachment 4257682
View attachment 4257683
Click to expand...
Click to collapse
Try different simcard same from jio.
Trex888 said:
Try different simcard same from jio.
Click to expand...
Click to collapse
OK I tried 3 different JIO network SIM cards in this phone. Nothing works. Whereas all these 3 SIMs work on a different android phone. The settings are exactly the same as the other android phone. However its worth mentioning that the moment I change the MNC code inside APN Settings, it made the whole APN disappear but I got LTE icon. Nonetheless its of no use because by doing this , the voLTE icon disappeared. And even with the LTE data connection, it could not load any website. When I reset the APN back to defaults, the volte icon appeared but LTE icon disappeared.
Not sure what else is left to try.
Just got the SIM replaced. Same issue
I refuse to give up knowing that it has worked in the past and the fact that other network 4G SIM cards work fine, i dont believe this is a phone fault.
There's an interesting event that i would like to share with you guys.
If I leave the phone idle for around 2-3 days, the phone brings up LTE icon and connects to mobile data. Yes, this only happens when the phone is idle for 48 hours or more. However the moment i toggle airplane mode or if I restart the phone, mobile data disconnects and wont connect until next 2-3 days. So it works this way and only with this 1 particular network operator. With others, it works instantly.
Is it a faulty motherboard (modem)?
I am facing this same issue with my Galaxy Note 4