Hey, guys. I left my G2 to go back to my GS4, and I'm having a bit of trouble. I'm trying to get back to an earlier firmware to gain root and flash custom recovery. Currently on NB1 firmware. TowelRoot does not work.
Anyway, I downloaded the stock ATT Firmware for my phone. UCUAMDL. When I go to Odin, Auto reboot and F reset time is checked. Re-Partition is not checked. Odin sees my phone. I hit PDA or AP and load my firmware file and hit start. Everytime, it fails after Nand write start.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
I have tried v1.85, 3.04, 3.08, and 3.09. I have tried various USB ports on my computer. I have tried 2 different cables. I always run as admin. I have tried running in compatibility mode. Kies is not installed. I have uninstalled and reinstalled drivers.
Any help?
Your phone has a locked boot loader which prevents a full downgrade. If you are on stock NB1, you can adb sideload the NC1 OTA update file. The all things AT&T should have the link.
Sent from my SGH-I337 running GPE using Tapatalk
jmjoyas said:
Your phone has a locked boot loader which prevents a full downgrade. If you are on stock NB1, you can adb sideload the NC1 OTA update file. The all things AT&T should have the link.
Sent from my SGH-I337 running GPE using Tapatalk
Click to expand...
Click to collapse
If I sideload NC1, will I be able to install custom recovery and flash custom ROMs? Or will that require the MK2 downgrade to flash custom recovery after root?
N12X93R said:
If I sideload NC1, will I be able to install custom recovery and flash custom ROMs? Or will that require the MK2 downgrade to flash custom recovery after root?
Click to expand...
Click to collapse
You will be able to root using towelroot and install touchwiz based custom roms. There is a version of the google play edition that works (there are some known issues though).
The stock recovery cannot be replaced. We have a special recovery (this recovery is available during normal boot itself) called safestrap that can be used to flash the custom roms.
All things AT&T
jmjoyas said:
You will be able to root using towelroot and install touchwiz based custom roms. There is a version of the google play edition that works (there are some known issues though).
The stock recovery cannot be replaced. We have a special recovery (this recovery is available during normal boot itself) called safestrap that can be used to flash the custom roms.
All things AT&T
Click to expand...
Click to collapse
Oh, wow. What happened? I guess Samsung stuck it to us one final hard time. Made things so much harder. Thanks for the clarification.
Unfortunately you cant install Safestrap Recovery while on NC1. At least I haven't been able to at all. Really f'n hating this crappy updated phone I got from ATT as a replacement for my broken old on with the good bootloader.
You should be able to, once you set selinux to permissive mode. Towelroot was also updated to do the same.
Sent from my SGH-I337 running GPE using Tapatalk
N12X93R said:
Hey, guys. I left my G2 to go back to my GS4, and I'm having a bit of trouble. I'm trying to get back to an earlier firmware to gain root and flash custom recovery. Currently on NB1 firmware. TowelRoot does not work.
Anyway, I downloaded the stock ATT Firmware for my phone. UCUAMDL. When I go to Odin, Auto reboot and F reset time is checked. Re-Partition is not checked. Odin sees my phone. I hit PDA or AP and load my firmware file and hit start. Everytime, it fails after Nand write start.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
I have tried v1.85, 3.04, 3.08, and 3.09. I have tried various USB ports on my computer. I have tried 2 different cables. I always run as admin. I have tried running in compatibility mode. Kies is not installed. I have uninstalled and reinstalled drivers.
Any help?
Click to expand...
Click to collapse
If you are on NB1 you can go back to MK2 to root or update to NC1 to use TowelRoot .
If you want to downgrade to MK2 and root please follow the steps in post 1, 2, 3 at here.
.
Related
Ok, so I rooted my phone using a method where i flashed an older kernel then used towelroot to root, and then flashed back to NJ4. All was going well, and i installed the safestrap recovery. Then, today i was tryin to install the CM12 for the S4, and i messed up where i put the files for this, so when i was in safestrap, it told me it failed. I hit reboot, and that is when my phone essentially 'soft bricked'. I tries to boot up, fails and goes into download mode. I tried pulling out the battery, tried to go into recovery, but i cant do it. I tried to flash 4.2.2. stock s4 firmware thru odin, but it kept saying "Can't open the serial(COM) port." and fails. I can't do anything right now, please help im panicking Dx
UPDATE: I tried again to flash stock and now when i try to boot it tells me "firmware upgrade encountered an issue.." now when i try to flash something it won't let me because odin fails and says
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337MVLUAMDJ_I337MOYAAMDJ_I337MVLUAMDJ_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
HELP
Someone wiser then me will probably come in but if you can get to download mode no big worries. The com port issue makes me think drivers or the USB port. I would try different USB port and potentially uninstall drivers and reinstall. I believe skip makes a tool kit for s4 today may help. Can you see the device in adb?
McAwesome said:
Someone wiser then me will probably come in but if you can get to download mode no big worries. The com port issue makes me think drivers or the USB port. I would try different USB port and potentially uninstall drivers and reinstall. I believe skip makes a tool kit for s4 today may help. Can you see the device in adb?
Click to expand...
Click to collapse
I updated my last post btw. Dumb question but...what is adb?
EDIT:
Got it. I found a link to a rootable 4.4.2 md5 file and flashed it and it worked!
Not compatible
Well CM12 CM11 no CM period is compatible with out S4 because of the locked bootloader and youre trying to use the wrong firmware in odin once you upgrade to 4.4.4 or 4.4.2 you can no longer downgrade and go down to 4.2.2 so stop trying that you need to either download NB1 or NI1 odin files and restore it that way thats if you havent completely messed up youre phone Good Luck!
Currently I'm running touchwiz on the latest 5.0 lollipop version. I've tried several different rooting methods and I keep getting stuck on this one error code in odin. Here are the codes:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.57.8-klte.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
You can't install Philz on the Verizon S5 because the boot loader is locked. You can root OA8 using these instructions: http://forum.xda-developers.com/showthread.php?t=3020546 just make sure to go back to NK2 first then follow the old NCG root method.
Thanks this for sure helped. I got it to pass and work, but how long should it take, because my phone has been stuck on the verizon screen for about 10 to 15 minutes. My odin window said it passed so it should work, but how long does this take?
calebp123 said:
Thanks this for sure helped. I got it to pass and work, but how long should it take, because my phone has been stuck on the verizon screen for about 10 to 15 minutes. My odin window said it passed so it should work, but how long does this take?
Click to expand...
Click to collapse
I had that problem as well. I think you need to factory wipe from recovery (volume up+home+power on boot), but there might be a better way to fix the problem.
Hey man, thanks for all the help. I got it rooted, and I installed safestrap. Now I was wondering if I could install cm12 and lollipop on this device, you know of anyway?
calebp123 said:
Hey man, thanks for all the help. I got it rooted, and I installed safestrap. Now I was wondering if I could install cm12 and lollipop on this device, you know of anyway?
Click to expand...
Click to collapse
No, you cannot install CM12 or any other AOSP ROMs. With a locked bootloader and safestrap you are limited to only installing touchwiz (TW) ROMs based on the same build you currently have on your phone. For you that means TW ROMs based on BOA8. Look in the Verizon Galaxy S5 Android Development section, I think there are only two right now.
Currently I'm running on NK2 so are there any that you recommend for that, or is there anyway I could upgrade to lollipop?
calebp123 said:
Currently I'm running on NK2 so are there any that you recommend for that, or is there anyway I could upgrade to lollipop?
Click to expand...
Click to collapse
Same advice as I gave for the BOA8 ROMs, look in the development section for ROMs based on NK2, pick the one that has the most features you want or looks the best to you and try it out. For upgrading to lollipop, follow this guide:
http://forum.xda-developers.com/ver...l/how-to-update-to-g900vvru1boa8-5-0-t3020546
All,
As I noted in another thread, when I worked on my wife's new Galaxy S5, I let it upgrade to Android 5.0, then rooted it, then made some mistakes while restoring apps via Titanium Backup. In order to undo those mistakes, I want to roll back to the beginning and start over. To that end, I have been trying to reinstall stock firmware on the phone but I keep running into the same problem:
Code:
<ID:0/022> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900PVPU1ANCB_G900PSPT1ANCB_G900PVPU1ANCB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Get PIT for mapping..
<ID:0/022> Firmware update start..
<ID:0/022> aboot.mbn
<ID:0/022> NAND Write Start!!
<ID:0/022> FAIL! (Auth)
<ID:0/022>
<ID:0/022> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Based on reading here and elsewhere, I have tried the following:
Factory reset the phone
Verified that USB debugging is enabled and that allow remote lock is disabled
Ran Odin as Administrator
Use different versions of Odin (have tried 1.3, 1.85, 3.07, and 3.09)
Tried different firmware versions
Reinstalled Samsung drivers
Tried different computers and different USB cables
Regardless of what I have tried, I keep getting the same error.
The phone still works - I can boot it, so it is not bricked. I was also able to successfully re-root the phone (using the CF Auto Root approach). Based on my reading, it seems that replacing the PIT file is a next step to try, but it also seems that this is a fast way to killing a phone, so I am hesitant to try.
The phone in question is a Sprint Samsung Galaxy S5, SM-G900P. The kernel is currently Android 5.0, build version LRX21T.G900PVPU2B0D3. I would like to replace with with the stock 4.4.4 kernel (found here: http://stockroms.net/file/GalaxyS5/SM-G900P/G900PVPU1ANCB_G900PSPT1ANCB_SPR.zip). If replacing the PIT file is the next thing to try, can you please point me to the specific one to use? If not, can you suggest something else to try?
Thank you.
Same here
I'm having exactly the same issue. Trying to downgrade from BOD3 to kit kat 4.4.2 NE5 in order to unlock my S5 G900P.
Hope someone has a workaround for this.
Sorry dumb question, what did you use to root a 5.0 firmware? I thought towelroot only works on 4.4.2?
Starting with BOD3 u cant downgrade anymore
Hope this will work 4 u.....it worked on my G900P :
1. Install CWM with odin...Philz: http://downloadandroidrom.com/file/G...2-klte.tar.md5
2. Download Galaxy S5 Rooted Stock ROMs and kernel, flashable zips, and copy to your SD card
3. Reboot in recovery ...wipe data/cache/dalvik....install the zips(kernel and rom)
4.Reboot to system and enjoy ur downgrade
thanks to bto001 here: http://forum.xda-developers.com/sprint-galaxy-s5/general/solution-to-sim-unlock-od3-downgrade-t3128120
What finally worked was to install the same version of the stock firmware.
Hi,
This is the first time i have tried to root my device, the international SM-G900F Running Lollipop. I'm following the tutorial on "galaxys5root(.com)" Method 1 as i want to install a custom Rom.
Every time i try to flash Philz Touch to my device it fails with the message on my phone
SECURE CHECK FAIL : recovery
Click to expand...
Click to collapse
And the following in the odin console:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.26.6-klte.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Ive tried various versions of Philz Touch, I've checked my device has USB Debugging Enabled and have tried various USB Ports and 2 computers.
How Do I Fix This.
Nathaniel x
Nathaniel1307 said:
Hi,
This is the first time i have tried to root my device, the international SM-G900F Running Lollipop. I'm following the tutorial on "galaxys5root(.com)" Method 1 as i want to install a custom Rom.
Every time i try to flash Philz Touch to my device it fails with the message on my phone
And the following in the odin console:
Ive tried various versions of Philz Touch, I've checked my device has USB Debugging Enabled and have tried various USB Ports and 2 computers.
How Do I Fix This.
Nathaniel x
Click to expand...
Click to collapse
I'm not sure regarding the actual rooting process, but I can tell you that I've successfully flashed Philz Recovery onto my S5 (SM-G900F, running official android lollipop 5.0 before that) just a couple of days ago.
I've used Odin 3 (v3.10.6) and Philz Recovery (v6.57.8). Everything went smooth and without any issues - flashed it in my first try. So in case you haven't tried that specific combo already, I'd strongly suggest giving it another go.
As for the custom rom goes...I've flashed the Resurrection Remix rom (http://forum.xda-developers.com/galaxy-s5/unified-development/rom-resurrection-remix-5-3-4-t3033255). The rom includes root as well btw, so no need to manually pre-root your S5. Based on my personal experience this is by far the best rom for the S5 And I can only suggest giving it a try.
hello everyone i am new here.
i have come here because i was trying to install a new recovery twrp to be exact. while i was installing it apeared a messge it said: the recovery has been installed correctly would you like to restart your mobile? and i restared my mobile and then it shown a message it said: system software not authorized by at&t has been found on your phone. at that time i had installed android lollipop 5.0.1 and it was rooted and i just wanted to re-install lollipop again by odin but knox and bootloader was enable so i cant reinstall the rom again and it seem like i have bricked my mobile..
help me please.
SGH-i337 is an AT&T phone which has a locked bootloader. If you have old bootloader like MDL you could use the loki exploit when you install the TWRP. What is your bootloader version?
I do not think there is a odin flashable lollipop full firmware exist. The last full firmware released for i337 is NB1 (kitkat). After that there is only incremental OTA upgrade to lollipop.
can i downgrade to kikkat?
i dont know what kind of bootloader i have. but odin is always fail when i try to apply the firmware... let me post a screemcapture!
can i dowgrade via ota... because i have tried to intall lollipop by ota but there is always an error! unpacking the package!
either samsung kies doesnt detect my mobile and i cant not enter to recovery mode because it says that firmware upgrade encountered an issue. please select recovery mode in kies and try again.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The ROM you are trying to flash has a bootloader that is older than the bootloader on the phone. This is evidenced by the fact that Odin stops after trying to flash aboot.mbn.
Look here for a possible solution: http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642
my mobile was running lollipop 5.0.1 and how can i get the latest version?
thank you it works hehe i am so thankful with you...
arigatou..