Related
I need help! I need a stock, unmodified recovery partition image.
Anyone here with a vzw tab who DOES NOT yet have CWM installed?.
PLEASE contact me.
Thanks!
electron73 said:
I need help! I need a stock, unmodified recovery partition image.
Anyone here with a vzw tab who DOES NOT yet have CWM installed?.
PLEASE contact me.
Thanks!
Click to expand...
Click to collapse
I have one that hasn't been moded but have no idea how to get you what you want. PM me if you know how to download and send to you and I'll do my best to help.
I'll check my laptop at home tonight. I believe I kept my heimdall backup before flashing cwm
Sent from my DROID BIONIC using Tapatalk 2
Just checked, mightve deleted it. Sorry man
aximtreo said:
I have one that hasn't been moded but have no idea how to get you what you want. PM me if you know how to download and send to you and I'll do my best to help.
Click to expand...
Click to collapse
Oh that would be awesome! Are you rooted? Let me find the commands in the meantime, I read somewhere it's a simple one command in terminal to extract the recovery partition into a file on sd card...
WHAT AN ORDEAL !!!!
But in the end: SUCCESS!
I managed to get my tab updated with the Verizon OTA update.
The problem is definitely CWM !!! A rude awakening is in store for everyone with the P6800 CWM installed, because it a) fails to verify the checksum of OTA files correctly on the i815, b) it thinks the tablet is a P6800, so the OTA file fails to run if it assert checks for "SCH-i815" hardware AND lastly c) modem updates don't work because the device /dev/cdma_update doesn't exist, so the modem.bin firmware_update call fails !!!
In short, I had to fumble the OTA file apart and do the update manually in two runs:
First file, kick the checksum, hardware check and modem update out, then manually run the ZIP through CWM. The zip subsequently (LUCKILY) updated the stock recovery and overwrote CWM with a new fresh stock recovery.
Second file had everything kicked out BUT the modem udpate and LTE patch, so with the STOCK recovery this file ran through just fine, updated the modem and then applied the LTE delta patch.
Phew!!!
Of course I had to manually restore root after the update, had backed up with voodoo, auto restore failed, so terminal and hacking it was...
Now I have the tab running on clean stock FD01, baseband and LTE FD01, rooted and stock recovery.
No more CWM, no more "hacking" with the ROM until some dev finally releases a "correct" CWM and at least ANY factory ODIN image is available to bring the tab back to stock if needed!!!
Kinda sick of the non-support for this tab. So much going on for the Galaxy Note and pretty much every other device. I'm starting to regret having bought this "special" Verizon version
Awesome find and great to know for whenever ics does come out. Could you please post the recovery img you got?
Sent from my DROID BIONIC using Tapatalk 2
OK after getting so many responses I decided to just post everything here in hopes that it will help others, too:
All files are here:
http://www.mywo.org:88/XDA/sch-i815/index.php
Step by step procedure to update the Verizon Tab from ..FA02 to ..FD01 build IF YOU ARE stuck with CWM installed on your tab and the original OTA fails with errors:
Upload the SCH-I815_FA02c_To_FD01.1.zip to the INTERNAL(!) SD card. This is important because CWM contains a bug that will only allow you to install from ZIPs stored on the INTERNAL SD storage.
Upload the SCH-I815_FA02c_To_FD01.2.zip to the EXTERNAL(!) (micro SD) card. This is important, because after the factory recovery is restored, it will correctly (and only) look for ZIPs on the EXTERNAL card.
Best way just copy both files to both locations
Fire up CWM and do "install from ZIP" and select SCH-I815_FA02c_To_FD01.1.zip
It should run (takes a while) and eventually tell you all is done. BOOT the tab. It should boot fine but in system it will show the new Android build FD01 but the baseband (radio) will still be the "old" one.
Now press and hold power and vol up again until you see the default Samsung recovery menu. Choose install from ZIP and select SCH-I815_FA02c_To_FD01.2.zip. This will now upgrade the baseband only. When done, reboot and enjoy being back on the "factory upgrade path" with the tab.
I hope someone more savvy than me can "fix" CWM to work properly with VZW tabs (accept the checksum, not fail the check for "SCH-i815" and provide the correct /dev file links for radio upgrades). Until then, I recommend just leaving the tab as-is and not tinkering with the ROM. Not that there is any custom ROM available anyway :-(
I also pulled the NEW factory recovery image FD01_recovery.img with the following command:
dd if=/dev/block/mmcblk0p6 of=/sdcard/FD01_recovery.img bs=4096
So in case anyone with a botched recovery wants to restore factory (Samsung 3e) recovery. This was actually the reason I had to go through all this... There is NO factory recovery image ANYWHERE to be found. I can't believe that I should be the first one ever to post one?? Anyway, hope it will help
I'm still quite new here, so I do really appreciate every click on that "thanks" button
P.S. for tinkerers and devs I also uploaded the original, untouched OTA file (0559c0e4e08e.update_SCH-I815_FA02c_To_FD01.bin) as it came from Samsung or Verizon or whatever and ended up in the /cache partition.
THANK YOU!
Electron,
You sir, are a BOSS! Thank you so very much for doing the work, and sharing it. You just made things one hell of a lot easier on me, and anyone else that follows.
Regards,
-Rob
Also want to say thanks. You rock, dude. I wouldn't have known how to revert **** on my own.
Also, I feel like we need a sticky or something for sch-i815 owners to go to for device specific stuffs, especially since there is little knowledge/info out for this device.
Sent from my Galaxy Nexus using xda premium
hmm i only ever installed ROM manager ... but i did root it ... problem is ... now i don't have a CWM recovery to flash the file ... any ideas?
phigmeta said:
hmm i only ever installed ROM manager ... but i did root it ... problem is ... now i don't have a CWM recovery to flash the file ... any ideas?
Click to expand...
Click to collapse
You're in luck! You don't need to go through the whole ordeal because you do NOT have CWM! You can just update the regular intended way. Go into settings, about phone and then click check for system updates. If it presents you the OTA update, just do it the regular way.
My complicated "hack" is only necessary if you DO HAVE CWM installed.
Im sorry I did not explain well what my issue is.
I do not have CWM installed, however i did delete a few appilcations using titanium backup. This causes updates to not take. I would really like to just take it back to factory and start over (this time with less stupidity on my part)
I of course would assume that once its at factory i can then install updates again.
Right now when i try i get the "!" droid sign and a reboot
phigmeta said:
Im sorry I did not explain well what my issue is.
I do not have CWM installed, however i did delete a few appilcations using titanium backup. This causes updates to not take. I would really like to just take it back to factory and start over (this time with less stupidity on my part)
I of course would assume that once its at factory i can then install updates again.
Right now when i try i get the "!" droid sign and a reboot
Click to expand...
Click to collapse
Hey
OK unless someone can tell us how to "make" an ODIN flashable ROM for you, here is what I would do (and please don't get scared because it sounds a bit convoluted).
First, you need to be rooted. This is obviously the case.
IMPORTANT since you don't have CWM installed yet, SAVE your factory restore.img before proceeding, this saves you a lot of hassle later!
Open the android terminal, type su (accept the prompt) and then type (or copy/paste)
dd if=/dev/block/mmcblk0p6 of=/mnt/sdcard/factory_recovery.img bs=4096
Check that you have a "factory_recovery.img" file on your sd card now it should be about 8M big.
Now you're safe to install CWM from the forum, look for the other thread(s) where this is being discussed and follow the instructions for the P6800 "international" version with 3G. CWM Thread here:
http://forum.xda-developers.com/showthread.php?t=1613638&highlight=cwm&page=3
Then (thanks to nicduim!) there is a full factory (rooted) CWM image floating around on the forums here:
http://forum.xda-developers.com/showthread.php?t=1613638&page=6
Which I used to restore my tab to "almost factory" with the missing bloat apps back in place.
I have a copy on my server here: http://ww.mywo.org:88/XDA/sch-i815/ it's the "2012-05-06.22.48.58.ZIP"
unzip that and put the contents on your INTERNAL SD card in the folder clockwordmod. So on your internal SD you should have /clockworkmod/2012-05-06.22.48.58 and inside there the files boot.img, recovery.img etc.
Use CWM recovery to restore this backup. If you never used CWM before. Press power button and volume up and hold both until you see the menu screen with text. You can go up/down with the volume buttons (go slow, it's very laggy) and with the power button you "select" an option. Select the "restore from backup" option and point it to the only folder being offered, the 2012-05-06.22.48.58.
The restore takes a while, then reboot the tab. Now you're back to stock! Last thing you need to do is get rid of CWM again because in the end it's still a bit buggy and will prevent the OTA update from running properly.
Since you luckily have a backup of the factory recovery in form of that factory_recovery.img file, just install and open terminal again, type su and then type (or copy)
dd if=/mnt/sdcard/factory_recovery.img of=/dev/block/mmcblk0p6 bs=4096
This overwrites CWM with your original Samsung Android recovery.
Now you just reboot as usual, connect to the internet and wait until the popup message shows up that a system update is ready, accept it and enjoy
If you don't want to wait for the automatic OTA, you can also stop before killing CWM and use my convoluted 2-step manual update which will get you to the exact same condition as the official OTA.
Hope all this makes sense
I was already on stock FD01 when I tried installing CWM for the P6800 that's floating around here somewhere. Odin said it was a success, but it looks like it didn't take. I've done it a few times, but still ended up w/ the stock recovery. However, after reading through your thread, I do not see a /dev/cdma_update in my I815 either. Is it possible that my attempt to install CWM (although unsuccessful) wiped out this file, among others?
Right now, I'm still at stock FD01 (rooted) and everything seems to be working. When I tried doing an OTA update, it just tells me that I have the latest update and no newer update is available.
One other thing, if I have to, I only have the stock recovery right now since CWM didn't take, can I simply flash both zip's using the Samsung stock recovery to put everything back in stock?
SCH-I815_FA02c_To_FD01.1.zip
SCH-I815_FA02c_To_FD01.2.zip
AlpineMan said:
I was already on stock FD01 when I tried installing CWM for the P6800 that's floating around here somewhere. Odin said it was a success, but it looks like it didn't take. I've done it a few times, but still ended up w/ the stock recovery. However, after reading through your thread, I do not see a /dev/cdma_update in my I815 either. Is it possible that my attempt to install CWM (although unsuccessful) wiped out this file, among others?
Right now, I'm still at stock FD01 (rooted) and everything seems to be working. When I tried doing an OTA update, it just tells me that I have the latest update and no newer update is available.
One other thing, if I have to, I only have the stock recovery right now since CWM didn't take, can I simply flash both zip's using the Samsung stock recovery to put everything back in stock?
SCH-I815_FA02c_To_FD01.1.zip
SCH-I815_FA02c_To_FD01.2.zip
Click to expand...
Click to collapse
Oh wait, so you are saying that in "About device" your Android is 3.2
Baseband i815.04 V.FD01 I815FD01
and your Build number is already at HTJ85B.I815FD01.SCH-I815.I815FD01 ?
That would mean you are already updated. In this case, it should be pretty easy to fix your problem. Which apps did you delete with Titanium? I can back them up from my system and make them available for you. All you'd need to do is drop the backup files into your Titanium backups folder and then fire up titanium and restore them!
The /dev/cdma_update node is only required WITHIN CWM recovery, so that is nothing for you to worry about. The zip files above won't help you because they are incremental updates requiring your system to be at FA02, not FD01 !
Yes... I'm already in the latest update. I already backed up the bloatware using Titanium Backup before uninstalling. So I just need to restore them back in order to receive and apply OTA updates in the future?
Sent from my SPH-D710 using Xparent ICS Blue Tapatalk 2
Please Help
Hi. I'm rooted and removed all sorts of bloatware with Titanium. I did this a long time ago and did not back anything up because I'm used to running hardware with custom ROMs available, and not relying on OTA updates.
Since there aren't any custom ROMs for the i815, I'd like to get ready for the upcoming ICS update. To do so, I want to get FD01 loaded onto my device, but I can't update because I've apparently removed too much of the required bloatware.
Does anyone know WHAT pieces of bloatware I'd need to reinstall in order for the OTA update to apply? I'd assume I can restore them and then apply the update and re-root.
If anyone can help pinpoint what missing APKs might help, I'll give them a shot. And, to the extent I figure anything out, I'll repost here in the hopes that it helps someone else.
electron,
Your instructions worked ... thank you so much
@jkrell... the failed attempt at installing the update should return an error message(s). You just have to read through them until you find the culprit(s). Apparently I uninstalled a few odexed files that were needed. I couldn't update until i hunted them down and restored them.
I guess we all jumped at the opportunity to install the cwm recovery image, that we didn't even think about cmda updates....ooops. So far i had to do a complete factory restore after the update. I was getting soft bricked to the point where I had no choice. Good thing I sent all titanium backups to actual sd card, i was able to salvage 97% f my data..... with the exception of a few downloads i forgot to move.
Gamecih doesn't work anymore (either version). No more automative data hacks I'm not sure what's going on. I uninstalled adfree..used titanium backup to uninstall both versions and reinstalled both several times. Oh well.
It really sucks not having nandroid backups but it's not worth the trouble of having to do this everytime an OTA modem update gets pushed to my tab. Needless to say, I won't be odining the cwm based recovery image again.
I'm with the O.P. I wish i hadn't wasted my money on this tab. No true cwm for this tab, so no dev will ever waste thier time with this tab. The sch i815 will soon be forgotten about and some other tablet will be all the hype before summer ends....that's just how it is. 21 months left on my contract.... [email protected]#k my life. Lol
Thanks Smitty.
When I try to update, I just see the "!" logo and then the device reboots. Is there a log file somewhere I can look at to see what the errors are?
I hear ya on the gloom and doom, but this device has only been out for just over 3 months now. I'd expect a recovery and some custom ROMs to come eventually. I doubt I'll go the custom ROM route unless CyanogenMod is supported, because I have no complaints about the tablet's performance thus far. It's speedy, smooth and the battery lasts forever.
In my book, this is a great tablet and I'm satisfied with the purchase.
Hello!
So, I've read through the beginner guides (and that is a hilarious video btw!) and just want to double check a few things. I'm on Fido (Canada) with a stock S4 (i337M) that I got a couple days ago.
1. I assume I use the instructions here: http://forum.xda-developers.com/showthread.php?t=2314494 [HOW-TO] and here http://forum.xda-developers.com/showthread.php?t=2298299 [Canadian Root and Recovery].
1a. That tool will allow me to un-root in case I need the warranty, yes?
2. I also want to flash to vanilla Android (aka Pure Google / Google Edition)... which ROM do I use? There are so many I can't tell.
2a. I know the Samsung camera app doesn't work on the Pure Google ROM, but is basic functionality still working, i.e. can I still take a picture / video / etc.? Is there any other basic functionality missing? (I heard something about the volume button?)
3. Which ROM do I use if I want to restore to factory?
4. I also need to backup my SMS, contacts, call log, app data, settings etc. so I can restore them easily after flashing to new ROM, or after restoring to factory ROM. Will Titanium handle all of this?
Thanks
kabutar said:
Hello!
So, I've read through the beginner guides (and that is a hilarious video btw!) and just want to double check a few things. I'm on Fido (Canada) with a stock S4 (i337M) that I got a couple days ago.
1. I assume I use the instructions here: http://forum.xda-developers.com/showthread.php?t=2314494 [HOW-TO] and here http://forum.xda-developers.com/showthread.php?t=2298299 [Canadian Root and Recovery].
1a. That tool will allow me to un-root in case I need the warranty, yes?
2. I also want to flash to vanilla Android (aka Pure Google / Google Edition)... which ROM do I use? There are so many I can't tell.
2a. I know the Samsung camera app doesn't work on the Pure Google ROM, but is basic functionality still working, i.e. can I still take a picture / video / etc.? Is there any other basic functionality missing? (I heard something about the volume button?)
3. Which ROM do I use if I want to restore to factory?
4. I also need to backup my SMS, contacts, call log, app data, settings etc. so I can restore them easily after flashing to new ROM, or after restoring to factory ROM. Will Titanium handle all of this?
Thanks
Click to expand...
Click to collapse
That guide should be fine. If you want "vanilla Android", right now the closest thing would be CM, you can get it from http://get.cm and select "jfltecan" (the canadian S4 model). Ye,s, Titanium can backup all of those things you mentioned, although I am not certain about system settings - there will be a lot of different settings between TouchWiz and AOSP.
CommentProvider said:
That guide should be fine. If you want "vanilla Android", right now the closest thing would be CM, you can get it from http://get.cm and select "jfltecan" (the canadian S4 model). Ye,s, Titanium can backup all of those things you mentioned, although I am not certain about system settings - there will be a lot of different settings between TouchWiz and AOSP.
Click to expand...
Click to collapse
awesome thanks. I'm not worried about system settings just apps and their settings.
for the factory ROM would this work?: http://forum.xda-developers.com/showthread.php?t=2261573 (again, I'm on Fido in Canada)
and lastly, I'm still not clear on the difference between Odin/Loki/whatever you use to root and/or flash - would someone be able to clarify?
Also, just to be clear, what is meant by 'recovery'?
Thanks again
http://forum.xda-developers.com/showthread.php?p=41989987
Loki
refers to the exploit that allows us to run custom recoveries as well as custom roms. You only need to have a loki'd rom if you have a model with a locked bootloader (AT&T).
recovery is a partition that you can access at boot by holding down a combination of keys. (volume up and home button in the case of our sgs4) every phone has recovery stock but it doesn't do much. you can replace stock with clockwork mod recovery which is extremely useful for flashing all kinds of things and making backups before you do. There are other alternative recoveries besides clockwork but that seems to be the most common. TWRP is also gaining popularity these days. You can easily switch between recoveries and or upgrade your current recovery. All that needs to happen is for a new image to be flashed onto the recovery partition. See the rooting guide for more info on how to flash a custom recovery.
Sent from my SGH-I747
mymusicathome said:
http://forum.xda-developers.com/showthread.php?p=41989987
Loki
refers to the exploit that allows us to run custom recoveries as well as custom roms. You only need to have a loki'd rom if you have a model with a locked bootloader (AT&T).
recovery is a partition that you can access at boot by holding down a combination of keys. (volume up and home button in the case of our sgs4) every phone has recovery stock but it doesn't do much. you can replace stock with clockwork mod recovery which is extremely useful for flashing all kinds of things and making backups before you do. There are other alternative recoveries besides clockwork but that seems to be the most common. TWRP is also gaining popularity these days. You can easily switch between recoveries and or upgrade your current recovery. All that needs to happen is for a new image to be flashed onto the recovery partition. See the rooting guide for more info on how to flash a custom recovery.
Sent from my SGH-I747
Click to expand...
Click to collapse
ok, great, thanks. just to clarify one last time: am I correct in understanding that I don't need to have a custom recovery in order to flash a ROM? or is that what installing clockwork mod/TWRP means? (or is that what rooting means?)
Lastly... is there somewhere with a list of what each custom ROM is, and/or what things don't work in the ROM? I do want vanilla, but I'd also be interested in checking out the other ROMs to see if there's one that will keep some TouchWiz functionality while removing the ridiculous skin.
Also, for vanilla Android, would you recommend waiting till devs release a MOD based off of the S4 GE?
kabutar said:
ok, great, thanks. just to clarify one last time: am I correct in understanding that I don't need to have a custom recovery in order to flash a ROM? or is that what installing clockwork mod/TWRP means? (or is that what rooting means?)
Lastly... is there somewhere with a list of what each custom ROM is, and/or what things don't work in the ROM? I do want vanilla, but I'd also be interested in checking out the other ROMs to see if there's one that will keep some TouchWiz functionality while removing the ridiculous skin.
Also, for vanilla Android, would you recommend waiting till devs release a MOD based off of the S4 GE?
Click to expand...
Click to collapse
Check out the link in my first post. A plethora of knowledge that will help you in your Rom journey.
Play around and test the options of roms you have. Each user has different likes/dislikes. MAKE SURE YOU READ THE ORIGINAL POST OF THE ROM YOU ARE PLANNING ON FLASHING. They will contain the basic inductions to flash the Rom and usually any bugs that exist.
Check out this thread for a list of compatible roms -
http://forum.xda-developers.com/showthread.php?p=41834056
[GUIDE][NOOB'S]These non-AT&T ROMs work on AT&T/TMO/Canadian S4 devices. Here's how!
A quick search can be a beautiful thing
Sent from my Nexus 10 using xda premium
mymusicathome said:
Check out the link in my first post. A plethora of knowledge that will help you in your Rom journey.
Play around and test the options of roms you have. Each user has different likes/dislikes. MAKE SURE YOU READ THE ORIGINAL POST OF THE ROM YOU ARE PLANNING ON FLASHING. They will contain the basic inductions to flash the Rom and usually any bugs that exist.
Check out this thread for a list of compatible roms -
http://forum.xda-developers.com/showthread.php?p=41834056
[GUIDE][NOOB'S]These non-AT&T ROMs work on AT&T/TMO/Canadian S4 devices. Here's how!
A quick search can be a beautiful thing
Sent from my Nexus 10 using xda premium
Click to expand...
Click to collapse
Thanks again for the link! I have actually seen several of those... but am just still very confused. mainly on these points:
- FIDO's rom isn't in those lists, and the variety of options for flashing (e.g. some ROMs say they need to be flashed with ODIN not TWRP) is a bit overwhelming!
- there's a post saying the Canadian ROMs are for odin not recovery flashing?
- I'm still not clear on whether I need to install a custom kernel just to flash a different ROM
- Also not clear on how to restore to factory stock (to take it to store for example)
- In the link you sent, the OP said non-ATT people should use the versions in their own forums... but does this apply to Canadian users too or is this ok for them?
Feel free to tell me if I'm being really dumb, but I really am a little lost lol.
As for buggy ROMs... would it be better to wait for one based off the S4 Google Edition?
Thanks again
Canadian dont need loki dont use loki never use loki
Take time to understand everithing before flashing
rodger is the same as fido exept for the rodger bloatware (my accout,visual voicemail etc)
what i did root with cf auto root
installed goomanager on google play ,this app can installed twrp and it really easy
in recovery i flash mint jelly rom ,after its done i flash faux kernel for canadian
To factory restore you have to installe stock rom thru odin ,(from what i understand) it change the rom and the kernel at the same time
zild8 said:
Canadian dont need loki dont use loki never use loki
Take time to understand everithing before flashing
rodger is the same as fido exept for the rodger bloatware (my accout,visual voicemail etc)
what i did root with cf auto root
installed goomanager on google play ,this app can installed twrp and it really easy
in recovery i flash mint jelly rom ,after its done i flash faux kernel for canadian
To factory restore you have to installe stock rom thru odin ,(from what i understand) it change the rom and the kernel at the same time
Click to expand...
Click to collapse
ok, so I'm just sorting through all of this. Successfully rooted and flashed CM nightly. However, now I see 'rogers' instead of 'fido' and 4G in the status bar, which I understand means that I'm on LTE according to stock JB icons.
So to sort this out:
a) what do I do about this incorrect network name?
b) if I restore to stock rom through odin, and it installs the 'rogers' rom, how do I get back to the fido apps? will I still have the network access / wrong name problem?
c) if I want to go BACK to stock eventually, I seem to have two options:
http://forum.xda-developers.com/showthread.php?t=2261573 [FACTORY STOCK]
http://forum.xda-developers.com/showthread.php?t=2269304 [12 May Official STOCK firmware collections for Canadian S4]
which do I use?
d) I took a nandroid image, BUT: can I restore from this (after wiping all data) to get back to factory ROM, or MUST I use ODIN? Or, do I need to use ODIN and then nandroid to restore everything about the stock ROM?
Thanks!!
A = I think cm have an option to rename carrier label if not you can install xposed framework and notach xposed and the go in frameword,module then activate nottach .open nottach then chose any option that you want ,over 100...
or i think you can try change your apn to show fido ( not sure)
B= check playstore for fido app
C= ? i dont know i think both of then are good, iwould use the one that say canadian stock firmware
D = if you restore from nandroid i think you flash counter gonna still show that you running cutom rom ,best way should be thru odin
Read a lot before you do anithing,you have to understand ..seem to be easy to brick .did not happen to me since one years ,but i read a lot..
And hit the thanks button when somebody helps you
zild8 said:
A = I think cm have an option to rename carrier label if not you can install xposed framework and notach xposed and the go in frameword,module then activate nottach .open nottach then chose any option that you want ,over 100...
or i think you can try change your apn to show fido ( not sure)
B= check playstore for fido app
C= ? i dont know i think both of then are good, iwould use the one that say canadian stock firmware
D = if you restore from nandroid i think you flash counter gonna still show that you running cutom rom ,best way should be thru odin
Read a lot before you do anithing,you have to understand ..seem to be easy to brick .did not happen to me since one years ,but i read a lot..
And hit the thanks button when somebody helps you
Click to expand...
Click to collapse
AWESOME, thanks for all that. Successfully flashed, so hopefully that's the end of it all. And thanks for pointing out the thanks button!!
Two LAST quick things:
- if I use the Canadian stock firmware, do I still end up with a wrong carrier name sign? I imagine I may need to ask the dev that, but just in case you happen to know. I actually can't seem to fix it using the methods you suggested, so I'd prefer not to have this happen.
- ok so I can flash with ODIN and then use nandroid to restore a snapshot of the filesystem I assume?
kabutar said:
AWESOME, thanks for all that. Successfully flashed, so hopefully that's the end of it all. And thanks for pointing out the thanks button!!
Two LAST quick things:
- if I use the Canadian stock firmware, do I still end up with a wrong carrier name sign? I imagine I may need to ask the dev that, but just in case you happen to know. I actually can't seem to fix it using the methods you suggested, so I'd prefer not to have this happen.
- ok so I can flash with ODIN and then use nandroid to restore a snapshot of the filesystem I assume?
Click to expand...
Click to collapse
-If you flash back to your stock carrier specific firmware with ODIN the carrier will be correct. You will be back to just as when you first got it from the dealer (provided they didn't set it up for you first).
-You shouldn't be able to restore the nandroid if you ODIN back to stock because you will no longer have a custom recovery.
blyndfyre said:
-If you flash back to your stock carrier specific firmware with ODIN the carrier will be correct. You will be back to just as when you first got it from the dealer (provided they didn't set it up for you first).
-You shouldn't be able to restore the nandroid if you ODIN back to stock because you will no longer have a custom recovery.
Click to expand...
Click to collapse
- Well the problem is that my carrier is Fido, a subsidiary of Rogers, and so CM only has a 'Rogers' release. Similarly there is only a 'Rogers' stock firmware, so I don't want to flash back to that and have the carrier still wrong...
- OK, well I assume I could root, flash nandroid, and then unroot - yes?
Thanks!
kabutar said:
- Well the problem is that my carrier is Fido, a subsidiary of Rogers, and so CM only has a 'Rogers' release. Similarly there is only a 'Rogers' stock firmware, so I don't want to flash back to that and have the carrier still wrong...
- OK, well I assume I could root, flash nandroid, and then unroot - yes?
Thanks!
Click to expand...
Click to collapse
-I see the dilema.
-Well as opposed to even flashing to stock with ODIN in the first place. I would suggest booting to recovery (TWRP or CWM), and restore your Nandroid backup. This should bring you to the point before you flashed any ROM. Keep in mind this won't however remove status showing 'custom'.
If you happened to already ODIN back to stock you would have to root again, install custom recovery and perform the step above.
blyndfyre said:
-I see the dilema.
-Well as opposed to even flashing to stock with ODIN in the first place. I would suggest booting to recovery (TWRP or CWM), and restore your Nandroid backup. This should bring you to the point before you flashed any ROM. Keep in mind this won't however remove status showing 'custom'.
If you happened to already ODIN back to stock you would have to root again, install custom recovery and perform the step above.
Click to expand...
Click to collapse
that is what I was thinking... there are ways to unroot as far as I know so hopefully that should be ok!
thankfully I did take a nandroid backup. speaking of which - I have 3 files, does this sound ok?:
- boot/sys/data (these were originally selected so just went with it)
- efs
- other (everything else)
last clarification: I thought nandroid was not recommended if switching between ROMs? like if I had a computer backup (i.e. nandroid) but took the backup in Windows XP (i.e. stock rom) and then tried to restore it over Windows 8 (i.e. CM rom), bad things would happen? or is the nandroid more like an acronis boot image thing where it completely wipes everything?
lastly, if I do that... do I need to wipe factory data, dalvik cache, etc or will nandroid take care of that for me?
many thanks again!
kabutar said:
that is what I was thinking... there are ways to unroot as far as I know so hopefully that should be ok!
thankfully I did take a nandroid backup. speaking of which - I have 3 files, does this sound ok?:
- boot/sys/data (these were originally selected so just went with it)
- efs
- other (everything else)
last clarification: I thought nandroid was not recommended if switching between ROMs? like if I had a computer backup (i.e. nandroid) but took the backup in Windows XP (i.e. stock rom) and then tried to restore it over Windows 8 (i.e. CM rom), bad things would happen? or is the nandroid more like an acronis boot image thing where it completely wipes everything?
lastly, if I do that... do I need to wipe factory data, dalvik cache, etc or will nandroid take care of that for me?
many thanks again!
Click to expand...
Click to collapse
I think when you go into recovery and restore nandroid everything will restore.
I would just restore the nandroid from your current state via recovery. If you are worried about it or it causes a problem, it isn't to many more steps to flash to stock via ODIN, root and install recovery and proceed with restore.
I think it is always safe practice to wipe first, and not to dirty flash.
blyndfyre said:
I think when you go into recovery and restore nandroid everything will restore.
I would just restore the nandroid from your current state via recovery. If you are worried about it or it causes a problem, it isn't to many more steps to flash to stock via ODIN, root and install recovery and proceed with restore.
I think it is always safe practice to wipe first, and not to dirty flash.
Click to expand...
Click to collapse
ok thanks.
However: I may be SAVED! I just realized that Fido is often tagged as FMC, and there's a stock firmware for that one in this thread. Thank the heavens!
kabutar said:
ok thanks.
However: I may be SAVED! I just realized that Fido is often tagged as FMC, and there's a stock firmware for that one in this thread. Thank the heavens!
Click to expand...
Click to collapse
Didn't know that! Never been with Fido. Great news for you, all you have to do is ODIN that firmware
blyndfyre said:
Didn't know that! Never been with Fido. Great news for you, all you have to do is ODIN that firmware
Click to expand...
Click to collapse
Yeah, very relieved, and now just gotta figure out why my phone is showing up as a Rogers phone when the nightly is tagged Rogers + Fido and I'll be good to go. I must say I miss multi-window a little and the handwaving over screen a lot, but by god TouchWiz was ugly.
hey kabutar
Yesterday i flash the 12 may stock firmware thru odin ,to revert backt to stock
Here what i did
-latest odin 3.07
-put your phone in download mode with usb not pluged to computer ...
-closed all kies software
-plug your phone in computer
add firmware on pda button ,dont touch any other option.
reboot i add a lot of crashing app so i went to recovery and errase data
reflash thru odin the stock firmware ,and boom everthing was stock ,no more custom in os or in download mode
Just running this by, to see if i have everything correct.
if i have cwm installed, regardless of model,
to install a stock firmware from samsung, thus basicaly resetting my device back to stock,
i can go into cwm and install this,
http://samsung-updates.com/details/12916/Galaxy_Note_8.0_LTE_Canada/SGH-I467M/RWC/I467MVLAMG2.html
since thats my model,
and it will restore the device to factory settings, correct?
will this wipe out cwm or will cwm stay?
also, can i do this from odin?
if so,
as long as one can get there device into download mode, they can restore the device correct?
and if thats the case, what are the ways that one may wipe out that portion of the device?
is that part of the bootloader?
or is it part of the kernal,
sorry for such noob questions...
i am really new to rom flashing, but really want to get good at it.
thanks everyone in advance,
ths forum is amazing, and all you people are amazing.
Samsung devices are pretty easy to restore and hard to brick, as long as you have some firmware you can flash through Odin. Download mode should remain intact even if you mess up the bootloader/system.
I haven't looked at the link you provided, but assuming the downloads there are in Odin format, flashing back to stock should be easy as pie.
If however, you don't have Odin flashable firmware, and you ahve soemthign that needs to be flashed via fastboot/recovery, then I'm hoping your recovery is still intact and you can boot to it via Volume Up + Home + Power. If you can get into it, you should be able to load firmware onto a MicroSD card and flash from there.
GhostCyber said:
Just running this by, to see if i have everything correct.
if i have cwm installed, regardless of model,
to install a stock firmware from samsung, thus basicaly resetting my device back to stock,
i can go into cwm and install this,
http://samsung-updates.com/details/12916/Galaxy_Note_8.0_LTE_Canada/SGH-I467M/RWC/I467MVLAMG2.html
since thats my model,
and it will restore the device to factory settings, correct?
will this wipe out cwm or will cwm stay?
also, can i do this from odin?
if so,
as long as one can get there device into download mode, they can restore the device correct?
and if thats the case, what are the ways that one may wipe out that portion of the device?
is that part of the bootloader?
or is it part of the kernal,
sorry for such noob questions...
i am really new to rom flashing, but really want to get good at it.
thanks everyone in advance,
ths forum is amazing, and all you people are amazing.
Click to expand...
Click to collapse
sorted!
Got it sorted, thanks very much..:good::laugh:
Hello,
I've just gotten my Galaxy S4 GE; before I did anything to it, I was wondering if there were an official site containing the stock images, like there is for Nexus devices (https://developers.google.com/android/nexus/images).
If not, how can I extract the ROM (and possibily the Recovery)?
Also, as an information, I've updated right away from 4.2.2 to 4.3 via OTA. I thought that the image might still be saved somewhere onto the memory...
Thanks for your time!
Could anybody please help or give me a hint on where to look at. I'd like to have a backup of my stock S4 GE!
Thank you.
UlixesTNT said:
Could anybody please help or give me a hint on where to look at. I'd like to have a backup of my stock S4 GE!
Click to expand...
Click to collapse
As far as I know, there is no stock image provided for the i9505G by Samsung or Google. Since this isn't a Nexus device, it doesn't have the same access to original software images.
I think the best you can do is to root the device, boot from a custom recovery, and then do a full Nandroid back-up. This keeps the device very close to stock and you end up with a path back to this state. Here's the process I used to get to the point where I could do the Nandroid backup:
http://forum.xda-developers.com/showthread.php?t=2365555
Use this version of CWM instead of the one listed--it's the newest version and supports Nandroid for the i9505G:
http://download2.clockworkmod.com/recoveries/recovery-clockwork-6.0.3.6-jfltexx.img
You can find more information in the i9505G Android development forum, particularly the sticky thread at the top.
Hello!
Thanks for the answer. I'll try to do as you said. Just two things:
- Will it be possible to run the CWM without flashing it? If yes, how?
- Is the "nanadroid backup" an option on CWM labeled with this very name? (Sorry for this qustion )
Also, by chance I found this: http://forum.xda-developers.com/showthread.php?t=2368121
Isn't a dump what I'm looking for? If not, what is it then?
I understand that there's no website that provides stock images (sort of stupid from Google), but can't I get the image of the 4.3 the phone downloaded when updating via OTA in any way?? Isn't it still stored somewhere for when I do a factory reset?
Thanks again!
highvista said:
As far as I know, there is no stock image provided for the i9505G by Samsung or Google. Since this isn't a Nexus device, it doesn't have the same access to original software images.
I think the best you can do is to root the device, boot from a custom recovery, and then do a full Nandroid back-up. This keeps the device very close to stock and you end up with a path back to this state. Here's the process I used to get to the point where I could do the Nandroid backup:
http://forum.xda-developers.com/showthread.php?t=2365555
Use this version of CWM instead of the one listed--it's the newest version and supports Nandroid for the i9505G:
http://download2.clockworkmod.com/recoveries/recovery-clockwork-6.0.3.6-jfltexx.img
You can find more information in the i9505G Android development forum, particularly the sticky thread at the top.
Click to expand...
Click to collapse
UlixesTNT said:
Hello!
Thanks for the answer. I'll try to do as you said. Just two things:
- Will it be possible to run the CWM without flashing it? If yes, how?
- Is the "nanadroid backup" an option on CWM labeled with this very name? (Sorry for this qustion )
Click to expand...
Click to collapse
Following the rooting process outlined only boots up your phone using CWM recovery and doesn't flash it. Just make sure that when you're done and choose to have CWM reboot your phone, if it asks you to overwrite your phone's recovery, you choose "NO".
The backup isn't called "Nandroid" in the CWM menus. You are just given options to do a backup or restore, which uses Nandroid.
Also, by chance I found this: http://forum.xda-developers.com/showthread.php?t=2368121
Isn't a dump what I'm looking for? If not, what is it then?
Click to expand...
Click to collapse
I haven't used the dump process described.
...but can't I get the image of the 4.3 the phone downloaded when updating via OTA in any way?? Isn't it still stored somewhere for when I do a factory reset?
Click to expand...
Click to collapse
That makes sense, but I haven't tried to find it.
Hello there!
I've successfully rooted my (Rogers) S5 Active / G870WVLU1ANH3 / kltevlactive using CF Auto Root, blowing my knox and all that, works great.
However, I'm now trying to flash either TWRP or CWM Philz for klte (which may have not been to smart come to think about that, but I recall reading it should work just fine) using Odin, and I can't get into recovery. Whenever I attempt to boot into recovery, I end up with "cannot do normal boot".
I recall reading a SafeStrap for G900 works for the G870, but I can't find the thread again, and don't want to just try and see what happens.
I've also tried flashing a recovery using either TWRP app and RomManager, I have yet to try Rashr, but since all the recoveries I've found are for klte, instead of kltevlactive, I'm slightly worried.
I'm not all that new to rooting, but I'm quite new (and upset ) at the Samsung realm, any chance you guys would know what could get me going with a custom recovery?
I also have a Xposed Framework installed, I read it could cause issues with SafeStrap, but I don't suppose it would affect flashing a rom from Odin/whatever else?
My SELinux on the phone claims to be "Enforcing", if that matters, perhaps.
Thanks!
Im having The same issue please help
Sent from my SM-G870W using XDA Free mobile app
Any luck on this? I've scoured the forums with no luck, although I see people mentioning they have it.
I am experiencing something similar. I have a rooted SM-G870W (Bell). I tried both TWRP and CWM recovery.
Every time I tried to go to recovery mode either via pressing button combo or from adb (adb reboot recovery),
my phone goes into download mode instead, I get "Downloading... Do not turn off target" screen.
Have you also experienced some weirdness with your rooted phone? On mine if I go into boot into recovery
(this is without custom recovery), do nothing but select reboot, I will get "System UI stopped working".
Or "unfortunately mtp application stopped" . I re-flashed the phone with the stock OEM ROM and I don't
get the issues I sated above.
BTW, how did you get xposed framework installed. Mine said "not yet compatible with Android SDK 21 "
Thanks
kachnitel said:
Hello there!
I've successfully rooted my (Rogers) S5 Active / G870WVLU1ANH3 / kltevlactive using CF Auto Root, blowing my knox and all that, works great.
However, I'm now trying to flash either TWRP or CWM Philz for klte (which may have not been to smart come to think about that, but I recall reading it should work just fine) using Odin, and I can't get into recovery. Whenever I attempt to boot into recovery, I end up with "cannot do normal boot".
I recall reading a SafeStrap for G900 works for the G870, but I can't find the thread again, and don't want to just try and see what happens.
I've also tried flashing a recovery using either TWRP app and RomManager, I have yet to try Rashr, but since all the recoveries I've found are for klte, instead of kltevlactive, I'm slightly worried.
I'm not all that new to rooting, but I'm quite new (and upset ) at the Samsung realm, any chance you guys would know what could get me going with a custom recovery?
I also have a Xposed Framework installed, I read it could cause issues with SafeStrap, but I don't suppose it would affect flashing a rom from Odin/whatever else?
My SELinux on the phone claims to be "Enforcing", if that matters, perhaps.
Thanks!
Click to expand...
Click to collapse
kachnitel said:
Hello there!
I've successfully rooted my (Rogers) S5 Active / G870WVLU1ANH3 / kltevlactive using CF Auto Root, blowing my knox and all that, works great.
However, I'm now trying to flash either TWRP or CWM Philz for klte (which may have not been to smart come to think about that, but I recall reading it should work just fine) using Odin, and I can't get into recovery. Whenever I attempt to boot into recovery, I end up with "cannot do normal boot".
I recall reading a SafeStrap for G900 works for the G870, but I can't find the thread again, and don't want to just try and see what happens.
I've also tried flashing a recovery using either TWRP app and RomManager, I have yet to try Rashr, but since all the recoveries I've found are for klte, instead of kltevlactive, I'm slightly worried.
I'm not all that new to rooting, but I'm quite new (and upset ) at the Samsung realm, any chance you guys would know what could get me going with a custom recovery?
I also have a Xposed Framework installed, I read it could cause issues with SafeStrap, but I don't suppose it would affect flashing a rom from Odin/whatever else?
My SELinux on the phone claims to be "Enforcing", if that matters, perhaps.
Thanks!
Click to expand...
Click to collapse
I am having the same issue. Any solution?
I had the "cannot do normal boot" issue as well after doing something dumb which stopped me being able to get into recovery. Was about to flash the original firmware but flashed twrp with odin instead after doing some research. Fixed my problem easily, hope this helps.
Same story with mine
Hi There
I'm having the same issue but all they talk about here are 900 and we have G870W
If someone find any information and how to flash the 870 I would be greatfull
to them because all I could find on the internet pertains to the 900 this is infurating
and by the way any of you have that OEM button in developer?
I bet not again all I've been reading on S5 Active also mention about the OEM button
and this is total BS because we don't have a OEM button. If we can find
a site that could help use with our particular phone and not just the 900
Hello, I have successfully unlocked the bootloader and rooted my S5 Active SM-G870W using this guide and carefully following the appropriate links for my device:
https://r2.community.samsung.com/t5...ooting-Your-Phone-and-Flashing-A/td-p/2496038
Now I would like to flash a custom recovery such as TWRP, but cannot find a recommended version for the G870W. Does anyone have any suggestions on where to find one, or know if any of the ones for the 900 would work on the 870? It's a Canadian version of the S5. Thanks for any help anyone is able to provide!
Does anyone know if the instructions for installing Lineage for SM-G870A/F (found here: https://lineageosroms.com/klteactivexx/) would work on my SM-G870W, kltevlactive? How much of a chance would there be it would brick it? Help much appreciated!