Database Users

Help me "unbrick" my Galaxy S (I9000NEJG2)

So, I think my phone is a bit bricked at the moment, I have this image of a phone, an exclamation mark, then a computer connected by a row of dots. I can't use links because I'm a new forum member, but you can see an actual picture of this image on the "[STOCK ROM] Odin3 One-Click Downloader" thread by Darkstrider.
I can still get into "download mode" using the keypress and Odin still picks up the device on the COM port.
It had this firmware before I tried flashing it (16Gb model locked to the Three UK network):-
PDA: I9000NEJG2
PHONE: I9000NEJG1
CSC: I9000HCGJF2
The steps leading up to the bricking:-
I was firstly trying to follow the instructions on Darkstriker's 2nd post from his topic " [REF] BIG FAQ Thread! {Flash/Root HOWTO} {ADB&Tutorials} {T&T} [READ BEFORE POSTING!]"
So I got JG5 firmware from a link on the Modaco forums (from the " 22/Jul r3 (JG5) - MoDaCo Custom ROM for Samsung Galaxy S with Online Kitchen" topic, the ROM was hosted on coblitz.codeen.org.
Installed the "usb_drivers_GalaxyS_x64.zip" drivers from the "USB Driver for Galaxy S and Misc Info" (xda forums) topic. Windows XP picked up and used the drivers in the extracted "03_Swallowtail" folder. It added "Samsung Mobile Modem" and "SAMSUNG USB Composite Device" to Device Manager.
So, I did everything on Darkstriker's guide, added the .pit file, chose the "re-partition" option because I was flashing to JG5. The process got stuck on "File analysis..", waited 20-30mins and it didn't move from this status.
Didn't work, so then I tried some different drivers, I googled and found "I9000_USB_driver.rar" on hotfile.
This time Odin got to the "Do not turn off target!!" status and it didn't move for around 20-30mins.
Restarted my computer, detached and reattached the USB cable, I decided to not use the re-partition option and try again, the status got to "factoryfs.rfs", this time the phone display went blank, which didn't happen before, but again it seemed stuck, nothing happened after waiting 20-30mins. So I aborted and closed Odin.
At this point I just wanted to use the phone to make a call when I notice the image/symbol above that I described at the beginning of this post. Help!
What's the best way to fix this? I spent nearly 2-3hrs trying to flash my phone and now it's half dead! I've nearly run out of mental stamina, but will give it a fresh attack today/tomorrow if someone can offer some suggestions.
Was thinking about trying the "fix" on the "[STOCK ROM] Odin3 One-Click Downloader" topic but not sure if it is only for the Captivate.
Hope you guys can help me out
All I wanted to do was to put the "(ROM Galaxy Europe) Doc's StockRomMod V2 (XWJG5)(deoxed) 30/07/10" ROM on my device, and add the JIT compiler and Flash 10.1 player if possible

Go read the guides from the development area.
It's just too easy and you're making it overcomplicated to yourself.
If you have the connect to pc error logo.. remove battery and then proceed.
1. if you installed kies ever, you already have the needed drivers.
2. start odin and select correct files (pit,code,modem,csc in respective order)
3. put phone in download mode (home + volume down + power)(hold long enough)
4. plug it to computer (odin should say "added")
5. press start (in less than 5 mins you phone should restart and go into special mode where it does some magic and reboot again and your done).

My god Buddy, you are right, I was overcomplicating things, I did it in the exact order you said and now I'm getting the progress bar for the first time.
I'm feeling optomistic now! Thanks dude!

It worked! If I was gay I'd kiss you on the lips! Thanks again buddy, it was stupidly simple after all.

Tundraswan
Glad your issue is resolved... just feel warm and cosy knowing that its not possible to brick your Galaxy S.

HELP!!!!
twisted_mind said:
Tundraswan
Glad your issue is resolved... just feel warm and cosy knowing that its not possible to brick your Galaxy S.
Click to expand...
Click to collapse
Really? I can't get my Captivate to even boot up...........no signs of life.........HELP!!!!!!!!!!!!
Stupid me: I pulled the USB cable and cancelled a ROM update (that was mid way) with Odin because i realized the SIM and SD card were still in the phone....so i pulled it to remove those and now NOTHING>>>>

Please help, following the instructions and it won't go back into download mode. Is there any other way?

Hello !
Where do i find those files for PIT , PHONE , PDA and CSC ?
i have i9000 galaxy s Problem solved , i already repaired my phone

These forums are for the Samsung Galaxy S i9000, you want to go here...
http://forum.xda-developers.com/forumdisplay.php?f=703

the galaxy s gt 1900 screen
Hi,
after a fail at rooten my device my phone keeps hanging on the galaxy s I900 screen for about 20 sec and then it turns it self off and on. He will repeat this until he runs out off juice.
this topic was usefull.. because the hole odin set up worked. But because of the turning off and on he cant complete the hole progress.
can anyone help me?

buddy01 said:
Go read the guides from the development area.
It's just too easy and you're making it overcomplicated to yourself.
If you have the connect to pc error logo.. remove battery and then proceed.
1. if you installed kies ever, you already have the needed drivers.
2. start odin and select correct files (pit,code,modem,csc in respective order)
3. put phone in download mode (home + volume down + power)(hold long enough)
4. plug it to computer (odin should say "added")
5. press start (in less than 5 mins you phone should restart and go into special mode where it does some magic and reboot again and your done).
Click to expand...
Click to collapse
I may have bricked mine too. Can anyone tell me where i would be able to get these files please? Thanks in advance!

fieldop said:
I may have bricked mine too. Can anyone tell me where i would be able to get these files please? Thanks in advance!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=846913 that has all stock roms.. just choose the one u need and job done !! That is providing you can get into download mode ???
If you cant get into download mode, theres a clever little tool you can make to force the phone into download mode.. http://forum.xda-developers.com/showthread.php?t=819551
Good luck

azzledazzle said:
http://forum.xda-developers.com/showthread.php?t=846913 that has all stock roms.. just choose the one u need and job done !! That is providing you can get into download mode ???
If you cant get into download mode, theres a clever little tool you can make to force the phone into download mode.. http://forum.xda-developers.com/showthread.php?t=819551
Good luck
Click to expand...
Click to collapse
Thanks soo much!! Done it! =)

Hi, i have semi bricked my galaxy s which is from the african region, but purchased in dubai. i've managed to cut open a micro usb jack and i can clearly see the pins i need to use, my question is, does the resistor value have to be exactly 301k or it can vary up or down slightly. also instead of using 3 100k resistors can i add up other values as well to make it close to 301k? sorry im noob at this stuff atm but i find such hacking very intriguing. also when i tried it with the resistors that add up to 300k, i join them to pins 4 and 5 with the phone switched off, after 5 seconds it shows the same thing 'phone ! pc'. by which i know all hope is not lost yet.

6stringster said:
Hi, i have semi bricked my galaxy s which is from the african region, but purchased in dubai. i've managed to cut open a micro usb jack and i can clearly see the pins i need to use, my question is, does the resistor value have to be exactly 301k or it can vary up or down slightly. also instead of using 3 100k resistors can i add up other values as well to make it close to 301k? sorry im noob at this stuff atm but i find such hacking very intriguing. also when i tried it with the resistors that add up to 300k, i join them to pins 4 and 5 with the phone switched off, after 5 seconds it shows the same thing 'phone ! pc'. by which i know all hope is not lost yet.
Click to expand...
Click to collapse
I did 300k and it worked. 3 x 100k ohm resitors.
Solder just one pin and leave one pin loose.
Connect that micro usb when phone is shut down.
Touch with that loose end to that pin which you did not solder. 4 or 5.
Keep it pressed until phone goes to the download mode.

You can try my jm8 guide.
Section B is for flashing stock 2.1, to get a fresh clean install.

Connection problem with almost bricked phone

Hello
I have a big problem with my note. today i wanted to change rom from imilka's AOSP ICS [IMM76D/4.0.4] to newest version of rocket. after flashing Abbys 4.2 kernel I missclicked to reboot button, after reboot phone got stuck and starting screen "Galaxy Note" I can even enter recovery, but can't do anything because if I try to move up or down then cwm got rebooted. Download mode works also BUT... The main problem is that after that fail with flashing I can't connect to pc. I tried with another cable/another pc/ reinstalled drivers and kies and still pc can't recoginze this device. any solutions? thanks in advance

If while flashing with Odin you receive an error message or got stuck on factoryfs the only thing you can do is to go to Samsung Assistance..

URcasm said:
If while flashing with Odin you receive an error message or got stuck on factoryfs the only thing you can do is to go to Samsung Assistance..
Click to expand...
Click to collapse
I can't connect to odin because pc doesn't see my phone connected :/ THAT'S MAIN PROBLEM

Dont panic !
please remove kies please and install the Samsung Galaxy Note USB drivers.
I will be online for you.
Please connect to PC Odin.
Let me know if you are not getting connected still ....

Really Bricked my new Galaxy Tab 2 7 inch. I have tried everything :(

Hello, I so hope someone can help. I just updated my galaxy tab 2 7 p113 to Android 4.0.4 UEBLH2. That was done automatically from samsung. I wanted to then install the newest update to 4.1.1 jellybean. So I downloaded it from this link. http://www.trickytweaks.com/update-...ecli4-4-1-1-jelly-bean-ota-test-firmware.html. I put the official Android 4.1.1 UEBLH2 Firmware on my sdcard then held down my power and up volume and installed it. HOWEVER, it never finished installing. Went all the way to the end. Now I HAVE NO USB CONNECTION and NO BOOT UP. Just black Since I dont have usb connection I cant us oden. CAN ANYBODY PLEASE HELP? I still can put files on my micro disk card and then put sd disk in my tab and use the power button up arrow to install something but I tried installing clockwork mod but that did not work. Iam out of ideas. P.S. My tab IS NOT ROOTED. I tried updating back to and original rom 4.04 I download but that did work. Thank you.

I think you need to enter the download mode volume down+power or recovery mode volume up+power to be able to restore the tab
Try multiple times close the tab even with long pressing power then try the button combinations (press both for multiple seconds) and release to see if you could enter any mode
If you reached download mode try flashing stock firmware for your tab specific model 3113 or 3110 or 3100 via odin (install kies and reboot before)
If you reached recovery (stock) then connect with kies and choose recover firmware from kies options (near the word file in top) you should have active internet connection
You could try charging tab even for some hours before trying button cobinations
If not try to return as not rooted so warranty is goood
Sent from Galaxy S2 or Galaxy Tab2

Mohamedselim said:
I think you need to enter the download mode volume down+power or recovery mode volume up+power to be able to restore the tab
Try multiple times close the tab even with long pressing power then try the button combinations (press both for multiple seconds) and release to see if you could enter any mode
If you reached download mode try flashing stock firmware for your tab specific model 3113 or 3110 or 3100 via odin (install kies and reboot before)
If you reached recovery (stock) then connect with kies and choose recover firmware from kies options (near the word file in top) you should have active internet connection
You could try charging tab even for some hours before trying button cobinations
If not try to return as not rooted so warranty is goood
Sent from Galaxy S2 or Galaxy Tab2
Click to expand...
Click to collapse
Yup, this should get you going again. If you can get into download mode, you should be okay. That's what Odin needs.
Download mode is volume down plus power. Then volume up
Recovery mode is volume up plus power.

I want to thank both the posters on trying to help me. I did hold down the power and download button and it went in to the download mode. HOWEVER, since I can not access usb it did not do anything. Just kept saying downloading. As I mentioned in my first post I CAN ACCESS MY SD DISK FILES by doing the power up button thing. Thats the only way I can get files on. But the DOWNLOADING down arrow just does not do anything. hmmmmmmm will keep plugging away.

I can not understand how you can not access usb, is it a lacking driver so download kies and reboot and try connect again ,also try a different usb ports (esp the rear of case) of your computer
Was usb working before the problem?
do you have cwm or stock recovery?
If cwm so download cm10 or cm9 from www.teamhacksung.org and put in usb card and flash but do a cash delete and dalvik delete afterwards not for boot loop
If stock so try stock firmware from www.samfirmware.com (register their first) and put in sd card and try to flash
Sent from Galaxy S2 or Galaxy Tab2

growthweb said:
I want to thank both the posters on trying to help me. I did hold down the power and download button and it went in to the download mode. HOWEVER, since I can not access usb it did not do anything. Just kept saying downloading. As I mentioned in my first post I CAN ACCESS MY SD DISK FILES by doing the power up button thing. Thats the only way I can get files on. But the DOWNLOADING down arrow just does not do anything. hmmmmmmm will keep plugging away.
Click to expand...
Click to collapse
I think you're misunderstanding download mode. When you get the device in download mode, connect it then to the computer, with Odin open. The only reason Odin wouldn't recognize it would be a driver issue. In that case, do as the previous poster stated. When you're in download mode, you're strictly flashing through Odin. You aren't going to see the device as a storage device on the computer. The only way your computer can interact with it at this point is Odin. Via Odin, flash the proper p3113 firmware file from sammobile/samfirmware (will be a large 600mb+ file). Once that's done, you should then be back to completely stock and healthy recovery and ROM. Reboot tab and see what happens. If it boots, and you still want to update, then make sure you get the correct ota for the base file you just flashed (that is, if you're trying to upgrade to say Jellybean). If you need more help always ask, but you should be fine. If I lived nearby I'd do it for you.

All I can say is unbelievable help here! Thank you. I am spending hours on this (plus a fortune on this new Tab 2 7). After studying up I do now understand how Odin works and how grabbing the correct firmware will do the job. HOWEVER (maybe others come across this huge roadblock) nothing can be done with out usb interaction. I DID DOWNLOAD KIES and installed it. But no matter what I do can not get any storage device listed or anything going on between tab and computer. Only thing my Tab does is when I plug it in to the computer via usb is go in to charging mode with the charging icon showing. Loading Odin does not show any connection. I have tried different computer USB plugins, 3 different computers (all I have loaded Kies on). Iam sooooooo close. If only while in the POWER BUTTON DOWN ARROW DOWNLOAD MODE and running ODIN on my computer there would be a connection I would be home free and able to flash firmware.
dictionary said:
I think you're misunderstanding download mode. When you get the device in download mode, connect it then to the computer, with Odin open. The only reason Odin wouldn't recognize it would be a driver issue. In that case, do as the previous poster stated. When you're in download mode, you're strictly flashing through Odin. You aren't going to see the device as a storage device on the computer. The only way your computer can interact with it at this point is Odin. Via Odin, flash the proper p3113 firmware file from sammobile/samfirmware (will be a large 600mb+ file). Once that's done, you should then be back to completely stock and healthy recovery and ROM. Reboot tab and see what happens. If it boots, and you still want to update, then make sure you get the correct ota for the base file you just flashed (that is, if you're trying to upgrade to say Jellybean). If you need more help always ask, but you should be fine. If I lived nearby I'd do it for you.
Click to expand...
Click to collapse

growthweb said:
All I can say is unbelievable help here! Thank you. I am spending hours on this (plus a fortune on this new Tab 2 7). After studying up I do now understand how Odin works and how grabbing the correct firmware will do the job. HOWEVER (maybe others come across this huge roadblock) nothing can be done with out usb interaction. I DID DOWNLOAD KIES and installed it. But no matter what I do can not get any storage device listed or anything going on between tab and computer. Only thing my Tab does is when I plug it in to the computer via usb is go in to charging mode with the charging icon showing. Loading Odin does not show any connection. I have tried different computer USB plugins, 3 different computers (all I have loaded Kies on). Iam sooooooo close. If only while in the POWER BUTTON DOWN ARROW DOWNLOAD MODE and running ODIN on my computer there would be a connection I would be home free and able to flash firmware.
Click to expand...
Click to collapse
How about you just gtalk me, lol. I'll probably reply faster there anyway. deliberation at gmail dot com.

Don't use kies. Install the Samsung driver for mobile phones (Google it).
Sent from my GT-P5113 using Tapatalk 2

Download Mode
growthweb said:
All I can say is unbelievable help here! Thank you. I am spending hours on this (plus a fortune on this new Tab 2 7). After studying up I do now understand how Odin works and how grabbing the correct firmware will do the job. HOWEVER (maybe others come across this huge roadblock) nothing can be done with out usb interaction. I DID DOWNLOAD KIES and installed it. But no matter what I do can not get any storage device listed or anything going on between tab and computer. Only thing my Tab does is when I plug it in to the computer via usb is go in to charging mode with the charging icon showing. Loading Odin does not show any connection. I have tried different computer USB plugins, 3 different computers (all I have loaded Kies on). Iam sooooooo close. If only while in the POWER BUTTON DOWN ARROW DOWNLOAD MODE and running ODIN on my computer there would be a connection I would be home free and able to flash firmware.
Click to expand...
Click to collapse
Once you are in download mode, connect your tab to the computer with the usb connection.....you should see a com xx number pop up in Odin in yellow reporting your device is connected thru a communication port. From there you will be able to choose the file you want as a PDA uncheck everything else...reboot...reset timer....whatever. Just make sure you have the correct firmware. There is a Odin flashback to Stock rom in the development section. Make sure it's for your device. Once you start Odin, should take about 4 mins...disconnect and hold the power button down to reboot. That's it....

Hello Everyone Again, I just want to say thank you for all of you who took the time to help. I hopefully will become knowledgeable enough to help people in the forums as I gain knowledge. I finally did find the solution. I did everything that was mentioned. And no matter what what I did with KIES drivers Samsung usb drivers, etc could not get a connection so I could us Odin to keep me back to the orgiginal 800 mb 4.04 original file. My solution was (as mentioned) I deleted all my windows drivers dealing with usb, kies, etc. Then rebooted. I notice even though I did not have a direct usb connection showing up now Odin was showing a connection! So using Odin I got to restore everything and now back to like new. Lesson learned. Hope this helps others that almost fatally brick their tablets. Thanks again for all our help

growthweb said:
Hello Everyone Again, I just want to say thank you for all of you who took the time to help. I hopefully will become knowledgeable enough to help people in the forums as I gain knowledge. I finally did find the solution. I did everything that was mentioned. And no matter what what I did with KIES drivers Samsung usb drivers, etc could not get a connection so I could us Odin to keep me back to the orgiginal 800 mb 4.04 original file. My solution was (as mentioned) I deleted all my windows drivers dealing with usb, kies, etc. Then rebooted. I notice even though I did not have a direct usb connection showing up now Odin was showing a connection! So using Odin I got to restore everything and now back to like new. Lesson learned. Hope this helps others that almost fatally brick their tablets. Thanks again for all our help
Click to expand...
Click to collapse
Glad you got it sorted.

i jus did the same thing u did
hi how r u doing. i jus did the same mistake u did and i really need your help please

Maxwell255 said:
hi how r u doing. i jus did the same mistake u did and i really need your help please
Click to expand...
Click to collapse
Hi.if u have done the exact same thing then just read the previous page and comments.
Sent from my GT-P3110 using xda app-developers app

Glad to see you resolved your issue. In the future, question/help threads belong in Q&A only.
Thank You.
Because your issue has been resolved...
Thread Closed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.

PeartFan40 said:
Glad to see you resolved your issue. In the future, question/help threads belong in Q&A only.
Thank You.
Because your issue has been resolved...
Thread Closed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.
Click to expand...
Click to collapse
Thread is still actually open, lol

Is there any way to save my tablet if there is NO firmware out?
Im talking about the SCH I705, I followed the root guide, and it got ****ed up.
Unable to boot into recovery (it goes to Odin "could not do normal boot.")
Tablet seems unresponsive sometimes (to power on/off)
Will boot cycle occasionally
???????????????????

igotbricked said:
Is there any way to save my tablet if there is NO firmware out?
Im talking about the SCH I705, I followed the root guide, and it got ****ed up.
Unable to boot into recovery (it goes to Odin "could not do normal boot.")
Tablet seems unresponsive sometimes (to power on/off)
Will boot cycle occasionally
???????????????????
Click to expand...
Click to collapse
You have to reflash your tablet using ODIN. It's not that hard. Just follow the second method here (you don't need to download android SDK)
copy this in your navigator bar : rootzwiki . com/topic/37272-verizonsch-i705-root-for-all-current-firmware/ ( delete space around the dot)
Plus, your tab will be rooted.
You're welcome.
P.S : This limitation of URL is annoying as hell.

Jiayu S3 3Gb boot loop, i can only access to fastboot

Hello everybody !
I 've spend a long time on this forum and i've found a lot of interesting and useful tips.
I'm in a bad situation today and I can not find a solution so i thank you for the time spent reading this.
Yesterday i've seen an icon on my desktop and i couldn't remember what application it is. I clicked and it was the beginning of an endless nightmare... A huge lag began by making the phone unusable and apps was installing one after one...
When it has calmed down a bit, i tried to install cleaning softwares but i couldn't do anything so I tried to do a factory reset. After that... the malware was still here... So i've decided to clean all by installing a new ROM.
This is a Jiayu S3 4G 5.5 Inch MT6752 Octa Core RAM 3GB 1080P Screen Dual SIM 4G LTE Mobile Phone (invoice description) so i wanted to try the CM12.1 for Jiayu S3 (found on needrom).
My phone was Rooted and TWRP was installed so i've copied the ROM files on a SD card, rebooted in recovery mode, wiped cache, data, dalvic and system and tried to install the new ROM. it was abnormally rapid and now the phone bootloops.
The only thing i can do is activate Fastboot (if i choose normal boot or recovery it continues to bootloop).
I've tried to flash recovery with :
fastboot flash recovery recovery.img
but i get an error message : FAILED (remote : partition 'recovery' not support flash).
Does anyone has ever been in this situation and solved it ?
Thanks for your help !

Hello,
I got exactly the same problem. Did you find a solution?
My phone is in a bootloop, I can only access to the fastboot mode. (fastboot devices show my device).
In this mode, I can't flash my recovery.img:
fastboot flash recovery recovery.img --> partition 'recovery' not support flash.
I can't see my device with the command adb devices (adb devices doesn't show my device, I think because USB debugging is off, but i can't switch it on)
Did someone find a solution ?
Any help would be appreciated, thanks !

That's the behavior of a wrong preloader that was flashed / malware that affected preloader.
Grab a full spftools ROM set, and flash the entire ROM using " upgrade mode"
Cheers
PS: on s3 you need to have both volume buttons pressed, then you can press download on the spft.
PPS: this will destroy all of your data, so back it up first ..

Thanks for your answer.
So, I downloaded latest version of Flash_Tools, but i can't find any complete set for flashing... only recovery.img (I'm searching on needrom.com). Do you have a place to find these?
>PS: on s3 you need to have both volume buttons pressed, then you can press download on the spft.
I think i got another problem: with Flash_Tools, I'm unable to flash anything to my device... There is a special mode to launch, as you explained, but it seems I can't access it... By pressing both up and down volume button, the phone should boot on a special mode ? How can I know if the phone is booted in this mode ? The USB cable must be plugged before/after booting the phone in this mode ?

mick605 said:
Thanks for your answer.
So, I downloaded latest version of Flash_Tools, but i can't find any complete set for flashing... only recovery.img (I'm searching on needrom.com). Do you have a place to find these?
>PS: on s3 you need to have both volume buttons pressed, then you can press download on the spft.
I think i got another problem: with Flash_Tools, I'm unable to flash anything to my device... There is a special mode to launch, as you explained, but it seems I can't access it... By pressing both up and down volume button, the phone should boot on a special mode ? How can I know if the phone is booted in this mode ? The USB cable must be plugged before/after booting the phone in this mode ?
Click to expand...
Click to collapse
There is no special mode, please serach the forum on how to use sptools, i am sure you will find plenty of them.

Sorry for late answer !
Thanks for this advice, i will try as soon as possible and post if it's ok or not.

Hello everybody !
Ok, I got it !
My problem came from the drivers... But not the ADB drivers, the preloader drivers.
In the Windows device manager, when I plugged my phone (previously swithced off), I got a "MT65xx Preloader" device with a warning. Be careful, this item stay 2 or 3 seconds before disappearing ! This driver wasn't installed correctly, that's why Flash Tools didn't worked for me (it didn't see my phone) !
So, I got the driver on the web, by typing "MT65xx Preloader driver", I got the drivers that I installed. This guide gave me the files and a method to install them:
http: //laurentiumihet.ro/sp-flash-tool-mediatek-mt65xx-drivers-download-and-installation-guide-including-bricked-devices/ (can't post links, delete space after http: )
To install the driver, you can set up manually by right clicking on the "MT65xx Preloader" > "Update drivers". Then, browse to the drivers you previously downloaded (a folder containing .inf and .sys files). Windows should detect the driver and install it.
To check if the preloader driver is correctly installed, power off your phone and unplug it, them plug it. Instead of the previous "MT65xx Preloader" entry, you should now see a "MediaTek PreLoader USB VCOM Port" under "Ports (COM & LPT)" (same as before, this item is displayed only 2-3 seconds...).
Now that the preloader driver is correctly installed, Flash Tools works for me. I successfully flashed a new rom I got from needrom.com (a full set, as suggested by superdragonpt), and my phone boots now =)
Thanks all for your answers ! Xehon, hope it will works for you !

Thanks mick605 !
I travel for work so i can't try all the advices on this forum atm.
I'll check this when i get back home and i'll tell you if it's ok
Thanks again !

mick605 said:
Hello everybody !
Ok, I got it !
My problem came from the drivers... But not the ADB drivers, the preloader drivers.
In the Windows device manager, when I plugged my phone (previously swithced off), I got a "MT65xx Preloader" device with a warning. Be careful, this item stay 2 or 3 seconds before disappearing ! This driver wasn't installed correctly, that's why Flash Tools didn't worked for me (it didn't see my phone) !
So, I got the driver on the web, by typing "MT65xx Preloader driver", I got the drivers that I installed. This guide gave me the files and a method to install them:
http: //laurentiumihet.ro/sp-flash-tool-mediatek-mt65xx-drivers-download-and-installation-guide-including-bricked-devices/ (can't post links, delete space after http: )
To install the driver, you can set up manually by right clicking on the "MT65xx Preloader" > "Update drivers". Then, browse to the drivers you previously downloaded (a folder containing .inf and .sys files). Windows should detect the driver and install it.
To check if the preloader driver is correctly installed, power off your phone and unplug it, them plug it. Instead of the previous "MT65xx Preloader" entry, you should now see a "MediaTek PreLoader USB VCOM Port" under "Ports (COM & LPT)" (same as before, this item is displayed only 2-3 seconds...).
Now that the preloader driver is correctly installed, Flash Tools works for me. I successfully flashed a new rom I got from needrom.com (a full set, as suggested by superdragonpt), and my phone boots now =)
Thanks all for your answers ! Xehon, hope it will works for you !
Click to expand...
Click to collapse
First of all hi I'm new in this thread,
I have installed everything correctly but I still have only 3 seconds before my phone showes the the charging icon and disconnects.
Can anybody please help me? I actually have been stuck with this problem for months now and all these months I have been using the samsung galaxy s advance (launched in 2011) on marshmallow.

Mobile not starting but detecting in PC. Help!!!!

I was trying to flash CM11 ROM in my Samsung Galaxy Ace GT-S5830, for that I have also installed CWM 6.0.5.3. While flashing ROM from recovery it failed with some error message, I tried it once again and again it stopped with the same error message. I decided to try some other ROM and kept mobile on side to search new rom, the mobile was still in recovery mode connected with usb for charging, after a minute as I saw at my mobile it was not in recovery mode, the screen was OFF. I tried to restart it again & again but failed, I even tried to start it in recovery mode but failed. Tried overnight charging, thinking that its battery is down, but failed to restart it. Then I searched about it on google, and came to know it was bricked with solution to flash it with stock rom using Odin, if it is still getting detected in PC. My PC is still detecting my mobile, tried flashing stock rom using Odin, but it is getting stuck at "< 1 >setup connection...". I don't know what to do now. My mobile is not in warranty, so no way in getting it repaired from service center. If anyone know any solution for this, then please tell me. I am eagerly waiting for your reply. Moderators, please don't delete this thread saying to go and search for same kind of threads, I have already done that & at last posted in new thread. Please Help me as soon as possible. Thanks..

http://download1187.mediafire.com/eew353b6p3sg/y2yja47mu5ew4g5/samsung+Galaxy-Ace+gt-s5830.rar
Extract it, open "S5830_Odin+Multi+Downloader+v4.38.exe" then in the OPS section select the .ops file in the extracted folder, then give a check on "One package" check box. Then on the bottom press the "One package" button and select the firmware in the folder and you're done !
P.S. If that doesn't work, try reinstalling Samsung USB Drivers, removing Kies, switching cables, ports or even PC's (if possible)