Database Users

Samsung Galaxy S Update Faild, Phone won't Start or Boot

Hi,
Today I wanted to update my Galaxy S via Kies and I get "Update Fail". From then my phone won't start, won't boot, won't do anything. On screen appears a phone with exclamation mark and a PC. I tried vol down + home + power but that symbol
won't disappear.
You can see the exact symptomes if you will search on youtube "Re: Samsung galaxy s upgrade FROYO 2.2 fail ! ! HELPPP "
Any solutions?
I would be grateful

gabi31_12_86 said:
Hi,
Today I wanted to update my Galaxy S via Kies and I get "Update Fail". From then my phone won't start, won't boot, won't do anything. On screen appears a phone with exclamation mark and a PC. I tried vol down + home + power but that symbol
won't disappear.
You can see the exact symptomes if you will search on youtube "Re: Samsung galaxy s upgrade FROYO 2.2 fail ! ! HELPPP "
Any solutions?
I would be grateful
Click to expand...
Click to collapse
In Kies select "tools", "emergence firmware recovery"....follow on screen instructions

This happened to me more than once.
Just pull out your battery and push the powerbutton for 3 seconds.
Now put the battery in, start in downloadmode and flash via odin

Time for a custom rom if you ask me...
You will never look back trust me...

Custom ROMS are always problematic and the OP is not asking about custom or stock roms..
@gabi Whenever such a situation occurs, just reinsert the battery and enter the phone to download mode and flash again and make sure your USB connection is solid and you are flashing with the correct files.

First of all.. that's a load of crap..
2nd.. he is using kies, not odin .. so what correct files?
Facepalm.
Custom ROMS are always problematic and the OP is not asking about custom or stock roms..
@gabi Whenever such a situation occurs, just reinsert the battery and enter the phone to download mode and flash again and make sure your USB connection is solid and you are flashing with the correct files.
Click to expand...
Click to collapse
Sent via my Android powered Galaxy S

I think crap is in your brain
We know that he was using KIES but as Timmey806 advised him in the 3rd post to use Odin for convenience, So I was talking about Odin and the firmware files you dumb-bell.
ImraanK said:
First of all.. that's a load of crap..
2nd.. he is using kies, not odin .. so what correct files?
Facepalm.
Click to expand...
Click to collapse

Also you are able to flash a stock firmware with odin but the OP has to find the right firmeware on his own.
I just gave a very usefull tip ;-)
@OP: Did it work for you?

Galaxy S bootloop

Hello everybody,
i´m new here and have a great problem on my Galaxy S I9000.
I hat Android 2.2 installed on that device and wanted to install Cyanogenmod by this guide (cant post links)
The Problem i had was i couldn´t get into the downloadmode or recoverymode (Volume up/down, home and Power button)
So i made it with the Android SDK (adb reboot download) to get into the downloadmode.
Once I was there i made the part with the heimdall flash --kernel zImage.
In the end it said the Installation was succesfully and rebootet the Phone. Now it always reboots and only shows the "Samsung Galaxy S I9000" screen and then restarts.
Notice, i didnt do anything else instead the things above (no rootet phone, no flash or something like this). I also had problems installing Android 2.3 with Kies on this device so i tried it with 2.2.
Is there a chance for me to get the phone back to stock? If i connect the USB to the PC it sounds like it detected the device, but then it restarts.
If i only stick in the USB cable to the PC without booting the device a round loading screen apears but stock.
Odin also dont show up anything. Is there anything i can do? Thank you.

Pinije said:
Is there a chance for me to get the phone back to stock? If i connect the USB to the PC it sounds like it detected the device, but then it restarts.
If i only stick in the USB cable to the PC without booting the device a round loading screen apears but stock.
Odin also dont show up anything. Is there anything i can do? Thank you.
Click to expand...
Click to collapse
For USB Connection issues try http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
For recovery try to Flash Rescue kit for i9000 http://forum.xda-developers.com/showpost.php?p=29331775&postcount=1

Sounds like you flashed kernel only, so the proper system is missing.
Try to get into download mode again, and flash a complete ROM (kernel, phone, csc, database, pit512, repartition...) using Heimdal or Odin. Search sammobile.com or the forum to get the ROM/version you need/want (if stock is your choice, use the 3-files-firmware).
If you want to install CyanogenMod, you'll need to get into recovery mode and install the CyanogenMod.zip from here.
Sent from my GT-I9000 using xda app-developers app

HELP: I bricked my Note 3 (N900). Forget to enable USB debugging before flashing!

I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.

boycam said:
I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
Click to expand...
Click to collapse
make sure kies is not running then try odin again

jaythenut said:
make sure kies is not running then try odin again
Click to expand...
Click to collapse
I tried many time already, but still fail. I think because the usb debugging mode was not enable at the first place.
Thank anyway.

boycam said:
I tried many time already, but still fail. I think because the usb debugging mode was not enable at the first place.
Thank anyway.
Click to expand...
Click to collapse
Usb debugging has nothing to do with it failing when you're using odin. Try a different version of odin.

A simple reflash via Odin 1.85 or 3.07/3.04 will fix it.

boycam said:
I have just bricked my newly-bought Note 3 (N900).
I wanted to flash the latest version of Note 3 via Odin 3.08 (from 4.3 to 4.4.2). I made a big mistake as I didn't enable the "USB DEBUGGING" mode before go to download mode.
I clicked start in Odin and it show FAIL!!!
After I restart the phone all I see on the screen is the message "Firmware upgrade encountered an issue Please select recovery mode in Kies & try again."
I tried to recover it through Kies, but the it shows the phone is not connected or not support. Meaning the Kies cannot communicate with the phone at all.
I also tries to flash in Odin many times, but it still fails.
Please!!! Can anyone here give me some solution.
Thanks.
Click to expand...
Click to collapse
USB Debugging has nothing to do with odin flash, make sure while flashing below steps.
1. Update boot loader is selected in odin.(Edit:for single file not required)
2. Disable antivirus.
3. make sure note 3 drivers are installed.
4. kies not running in bag round.
5.Clear Factory Data & Catch before flash.

if all of those step fail..
try to flash ur rom on other computer or laptop
Sent from my SM-N900 using XDA Premium 4 mobile app

radicalisto said:
A simple reflash via Odin 1.85 or 3.07/3.04 will fix it.
Click to expand...
Click to collapse
Thankx man itis worked:good::good:

jdomadia said:
USB Debugging has nothing to do with odin flash, make sure while flashing below steps.
1. Update boot loader is selected in odin.(Edit:for single file not required)
2. Disable antivirus.
3. make sure note 3 drivers are installed.
4. kies not running in bag round.
5.Clear Factory Data & Catch before flash.
Click to expand...
Click to collapse
tried flashin with diff odin versions, was not working, tried ver 1.85, cause it lets you select update boot loader.......and BAM,,it worked on my tmobile tab 4, now i c.an wipe the tears off the key board, thanks, didnt do # 5 tho, was rooting the tab with cf auto.

markap99 said:
tried flashin with diff odin versions, was not working, tried ver 1.85, cause it lets you select update boot loader.......and BAM,,it worked on my tmobile tab 4, now i c.an wipe the tears off the key board, thanks, didnt do # 5 tho, was rooting the tab with cf auto.
Click to expand...
Click to collapse
You've indeed saved my day... I've been searching high and low, installing various versions of Odin3, downloading tonnes of tar, tarmd5, zip, etc.!
Pardon me for my ignorance, but I never intended to root my cell phone in the first place. I was merely following what Kies suggested, "A New Firmware, Wanna Upgrade?" Oh, truly? Gee, thanks! And **** it, it screwed up my GT-N7000, saying "Firmware upgrade encountered an issue..." and my cell phone never saw the daylight again, regardless how I started it, factory-reset mode wasn't possible at all, only download mode could be started up. Tried with various methods of Odin3 on multiple ROMS, to no avail, until I read your short reply. BAM! (As you put it...)
Thanks a bunch, mate!

I have a similar issue with my sm n900. Lost my imei and baseband, i needed to flash a custom rom to get my baseband before working on the imei, after flashing via odin phone boots to samsung logo then goes blank. And recovery says E failed to mount efs . But i need to use adb on my pc. So how can i possibly enabe usb debugging in order for adb to find my device?

Flashing a stock ROM from sammobile.com via Odin does not require USB debugging. Flashing a stock ROM will flash everything, including modem, bootloader, and recovery.

My N900 Bricked
I am unable to Go to download mode not even the charging symbol too
no Luck at all phone is not starting need a Unbrick or help me how to get it sorted
galaxy Note 3 Sm N900
Tried to open the phone to short the wire but the shorting mentioned in all the imagees doesnt match the design of the phone internal
can some one tell me which points to short to start the phoen in Ext sd mode
or any help would help

[Q] Did I just brick my s4?

Hi, I have a rooted galaxy s4 LTE with android 4.3, and was going to update to 4.4.2 via odin 3.09, but during the middle of the installation, I heard a usb disconnection sound, and a red light saying fail appeared on odin. I waited a while, but nothing, and when I restarted my phone, I got that message "firmware upgrade encountered an issue. please select recovery mode in kies and try again" with some odin console messages on top.
I don't know why I can't recover with kies, nothing shows up on the list, and I tried to flash again with odin, using the same rom, but it failed.
what should I do?
I downloaded the official rom from sammobile.
thanks in advance

fael097 said:
Hi, I have a rooted galaxy s4 LTE with android 4.3, and was going to update to 4.4.2 via odin 3.09, but during the middle of the installation, I heard a usb disconnection sound, and a red light saying fail appeared on odin. I waited a while, but nothing, and when I restarted my phone, I got that message "firmware upgrade encountered an issue. please select recovery mode in kies and try again" with some odin console messages on top.
I don't know why I can't recover with kies, nothing shows up on the list, and I tried to flash again with odin, using the same rom, but it failed.
what should I do?
I downloaded the official rom from sammobile.
thanks in advance
Click to expand...
Click to collapse
i had the same problem before! it was the usb ports in my pc ! i changed pc, i used my laptopt and everything were ok! just test another usb port or another pc using odin and original rom and everything should be ok! Dont panic ur phone is ok
remember always to run odin as administrator

hey! yeah, apparently it was those front usb ports, both of them weren't working properly, when I connected to another usb behind the computer it worked fine installing the same rom through odin.
phew!
thanks

[Q] Samsung galaxy core 2 sm-g3555h updated failed via otp! cannot enter recovery!

my phone Samsung galaxy core 2 sm-g355h started updating! when getting in 95% of updating have stopped with the message error! so from now and then my phone restarts and try again to reinstall the update with the same result!! can't insert in recovery mode because it's starts again the upadating!! so my phone is dead and cannot do anything! even with odin i have tried to install a stock rom and cannot do it! it say's tha cannot open com port! althought odin see's the phone!! i have been dissapointed!! the only sollution that remain's to me is to pay a visit in samsung's dealer!! Do you have any idea?
:crying:

I had the same problem with this device... I had to flash stock rom with odin.
Just install kies and open it. Then reinstall usb driver through kies and then try flashing stock rom with odin, it will surely work. So good luck with that.

updating via ota isnt much good follow kies or stores

did you fix it? if yes how? I have the same problem

The best thing about samsung is Samsung Kies. There is a emergency firmware recover or something of that kind, I dont remember the name. Just install it and connect your device to it. It will try to recover your phone

go to a mobile center