Database Users

original Samsung Omnia 7 ROM

guys,
where I can download the original Samsung Omnia 7 ROM without any mobile carrier customization.

Hi,
Why do you want it? There aren't any carrier customisations apart from the splash screen
serg

There is the small annoyance of the default search in internet explorer not being bing search with some carriers.

Is it possible to change the rom?
Never heard of that before...

my mobile was locked to Three UK carrier and right now I don’t have any problem expect that I cannot send or receive MMS. I though maybe the MMS is been locked to the carrier.
Also, I want to get ride out of the slash logo in the beginning..

Yes it's possible to flash a diffrent ROM (I have flashed my H3G provided phone with a T-mobile branded version, this was the only working ROM I could find).
One reason besides getting bing search would be to be able to run the Samsung Network Profile app from the Marketplace.

FiDo said:
Yes it's possible to flash a diffrent ROM (I have flashed my H3G provided phone with a T-mobile branded version, this was the only working ROM I could find).
One reason besides getting bing search would be to be able to run the Samsung Network Profile app from the Marketplace.
Click to expand...
Click to collapse
Where did you find the t-mobile ROM? is there a 3g/2g toggle now?

on www.samfirmware.com or just google I8700DTMJJ6 for alternatives.
There's a use 3G connection when available option under settings >> cellular but I'm not sure if that's what you mean.

Could there be some problems if the Omnia 7 is locked from the provider when flashing this specific samsung firmware ?
I'd like to try it but don't want to brick my device (o:
//edit
mhmm, just wondering why this codes won't work..can the provider lock them ?
- First check your firmware *#1234#
- Check Simlock and Network lock is OFF *#7465625#
Click to expand...
Click to collapse

You have first to go to the diagnosis menu (call ##634#) and then you'll can check your network status.

i8700 three
i have a i8700 from three 3 uk and when i try to flash the only working rom from samfirmware i get the mesage your device is not a retail device downloader will not do anything to your device. all the locks are off in the locks menu...what can i do to update my phone...

Erwan960 said:
You have first to go to the diagnosis menu (call ##634#) and then you'll can check your network status.
Click to expand...
Click to collapse
That's interesting...
I've had mine unlocked (it was bought as Three UK) and when I go to diagnosis menu it says everything is unlocked:
lock status menu - all DISABLED
network lock - DISABLED
subset: DISABLED
SP LOCK: DISABLED
CP LOCK: DISABLED
Still - I cannot use SAMSUNG's network profile changer and my mms are not working ;-(

just flashed my Omnia 7 to I8700DTMJJ6. Although my Omnia 7 is not from that region but so far everything is working fine.

c010 said:
just flashed my Omnia 7 to I8700DTMJJ6. Although my Omnia 7 is not from that region but so far everything is working fine.
Click to expand...
Click to collapse
please explain more,
how did you do it?
where are you from and was your mobile lock to a carrier before your flashed ?

As far as I'm concerned, mine is Orange (fr) locked and was on JJ4. I flashed it with DTMJJ6 (T-online) and all works fine (except 3G wich needed the net profil app to work perfectly).
Pictures of the flash : http://www.tmaddict.com/index.php/forum/viewtopic.php?f=133&t=21328

Hy. Please fogive my bad english. When I try to update my phone with I8700_WP7_Downloader_Ver_7.03.For_Retail_Device updater it says that my device is not retail device and update nothing. Can i find somwhere an updater progam for not retail devices or what can I do to upgrade my phone?

Nowaynoway said:
please explain more,
how did you do it?
where are you from and was your mobile lock to a carrier before your flashed ?
Click to expand...
Click to collapse
First of all my device is from singtel, Singapore and its official unlocked. I am from Malaysia and bought this phone from Singapore. there are only 2 firmware available from samfirmware.com
However, only tmjj6 is flashable. I followed the user guide. Make sure Samsung USB driver is installed prior to the below steps.
1. Unzip/unrar the downloaded jj6 with password "samfirmware.com"
2. Make sure your phone is not locked to carrier (sorry for those locked phone). Switch off your phone and make sure is unplug from PC.
3. Launch the flash tool, then select all the unzipped file, drag and drop it into the flash tool. It will then auto load up the necessary files.
4. Hold volume up+home button+power button
5. The moment the phone powered up, let go all the buttons, it will then boot into download mode.
6. Plug your phone to PC, your PC will detect your phone and install USB driver accordingly.
7. If drivers are installed, you will notice the flash tool detected your phone. Hit the start button and that's it, wait till everything is ready then you can unplug the cable.

tomylyon1989 said:
Hy. Please fogive my bad english. When I try to update my phone with I8700_WP7_Downloader_Ver_7.03.For_Retail_Device updater it says that my device is not retail device and update nothing. Can i find somwhere an updater progam for not retail devices or what can I do to upgrade my phone?
Click to expand...
Click to collapse
you can refer to my steps. This only applicable for non lock phone. Download the firmware and flash tool from samfirmware.com

Mine was locked on Orange and the DTMJJ6 (T-Online) works on it.

c010 said:
First of all my device is from singtel, Singapore and its official unlocked. I am from Malaysia and bought this phone from Singapore. there are only 2 firmware available from samfirmware.com
However, only tmjj6 is flashable. I followed the user guide. Make sure Samsung USB driver is installed prior to the below steps.
1. Unzip/unrar the downloaded jj6 with password "samfirmware.com"
2. Make sure your phone is not locked to carrier (sorry for those locked phone). Switch off your phone and make sure is unplug from PC.
3. Launch the flash tool, then select all the unzipped file, drag and drop it into the flash tool. It will then auto load up the necessary files.
4. Hold volume up+home button+power button
5. The moment the phone powered up, let go all the buttons, it will then boot into download mode.
6. Plug your phone to PC, your PC will detect your phone and install USB driver accordingly.
7. If drivers are installed, you will notice the flash tool detected your phone. Hit the start button and that's it, wait till everything is ready then you can unplug the cable.
Click to expand...
Click to collapse
thank you for sharing this information, can you answer the following:
After the upgrade can you access marketplace ?
How to back to original image come with the mobile ?
Why you shift to t- mobile ?

[Q] Help! Samsung S5 no service

For two weeks, my Samsung Galaxy S5 SM-G900F has no signals. It keeps showing No Service, I can't receive calls/messages at all.
I have used Smart Tutor to contact Samsung, their engineer reset the system (maybe), but couldn't make it work. Then I sent the phone back to UK service centre, they sent it back to me quickly with doing anything --just because my phone is not in European warranty. :crying:
The details of the phone:
IMEI is right, fireware is Country: Hong Kong, PDA: G900FZHU1BOA1,
From I have read, it seems like the Radio was turned off. But I don't know how to turn it on.
I tried to enter Service mode by dialing code *#*#4636#*#* but it didn't work for me.
I can get into ServiceMode by code *#0011# but I don't know what to do next.
Any help would be greatly appreciated!

Flash radio/modem or full firmware for the country you are in?

How to flash radio/modern?
*Detection* said:
Flash radio/modem or full firmware for the country you are in?
Click to expand...
Click to collapse
I don't know how to flash radio/ moderm, could anyone give me some guide please?

lyrruo said:
I don't know how to flash radio/ moderm, could anyone give me some guide please?
Click to expand...
Click to collapse
1 Turn off your phone
2 Download and install Samsung USB Driver
3 Connect USB cable to PC (do no connect phone)
4 Hold Volume Down + Home Button and power on phone, follow onscreen instructions to enter Download Mode
5 Download and unzip Odin
6 Connect phone to PC, wait for Windows to install the device drivers
7 Download modem
8 Run Odin and load modem in "CP", flash modem
:good:

lingowistico said:
1 Turn off your phone
2 Download and install Samsung USB Driver
3 Connect USB cable to PC (do no connect phone)
4 Hold Volume Down + Home Button and power on phone, follow onscreen instructions to enter Download Mode
5 Download and unzip Odin
6 Connect phone to PC, wait for Windows to install the device drivers
7 Download modem
8 Run Odin and load modem in "CP", flash modem
:good:
Click to expand...
Click to collapse
Hi lingowistico,
I did what you said, but it still can't work.
Is the modem not for the UK? (btw, the phone was from Hongkong, but I use it in the UK)
help......

Aside from the radio/modem that you should try flashing i suggest trying a custom rom as i had a similar issue on the official one

shirogeek said:
Aside from the radio/modem that you should try flashing i suggest trying a custom rom as i had a similar issue on the official one
Click to expand...
Click to collapse
How should I do that?

lyrruo said:
How should I do that?
Click to expand...
Click to collapse
You can do that by reading the stickies like everyone else does instead of expecting that someone else will do it for you.

same here in 3 different devices...
The same happened to mine and my wife's devices. Since last Saturday I rooted them both, load 4.4.4, then ulgrade them to 5.0... downgrade them again. Tried flas modem a d flash radio. Seems nothing is working. Both are g900h. And today just realized that my cousin's g900f just have the same issue since friday. How can I know the date of the automatic installed updates... maybe some update cause this?
Also tried shortcut master to enter the secref codes with super user... no code is working...
The signal just comes and go every 5 mi utes. Sometime I can make a phone call but it crashed like 1 minute after I made it. Lazy data signal.
What else do you guys reccomend?

[Q] EE sim not working in unlocked S4 Invalid Sim

Every type of sim works in my Samsung Galaxy S4 i9505 apart from EE sims. I have been back and forth with EE on the phone and to my local store and no-on knows what the issue is.
The phone is unlocked and was working fine with my (UK) T Mobile sim. Apparently the only difference between T Mobile and EE sims is the 4G part. Interestingly, a contract EE sim returns the message "Invalid Sim". A pay as you go EE sim returns the message "No Sim". My local EE store think this is a software issue rather than hardware.
Unlocked Samsung Galaxy S4
EE PAYG brings up "No Sim" error
EE contract sim brings up "Invalid Sim" error
All other networks' sims work fine
The IMEI is not blacklisted or blocked on EE
I have done a factory reset
AP: I9505XXUHOB7
CP: I9505XXUHOB7
CSC: I9505BTUHOB4
The problem is that I bought the phone off contract so EE cannot do anything and the warranty has expired. Has anyone ever heard of this problem before, and does anyone have any ideas as to what I could do next??

tomedwards93 said:
Every type of sim works in my Samsung Galaxy S4 i9505 apart from EE sims. I have been back and forth with EE on the phone and to my local store and no-on knows what the issue is.
The phone is unlocked and was working fine with my (UK) T Mobile sim. Apparently the only difference between T Mobile and EE sims is the 4G part. Interestingly, a contract EE sim returns the message "Invalid Sim". A pay as you go EE sim returns the message "No Sim". My local EE store think this is a software issue rather than hardware.
Unlocked Samsung Galaxy S4
EE PAYG brings up "No Sim" error
EE contract sim brings up "Invalid Sim" error
All other networks' sims work fine
The IMEI is not blacklisted or blocked on EE
I have done a factory reset
AP: I9505XXUHOB7
CP: I9505XXUHOB7
CSC: I9505BTUHOB4
The problem is that I bought the phone off contract so EE cannot do anything and the warranty has expired. Has anyone ever heard of this problem before, and does anyone have any ideas as to what I could do next??
Click to expand...
Click to collapse
Since I can't think of any other reason as to why it wouldn't work. Try updating the Modem and BL.
What you should do is, remove the SIM.
Download the XXUHOB8 Modem and Bootloader.
Flash them.
Let the phone boot up.
Do a HARD reset.
Insert the SIM.
Then check.
Thanks to @Repulsa for providing us with the OB8 modem and BL.
Here's the link for the GSM/LTE modem file for your phone: https://mega.co.nz/#!65RQ3QJY!kINweEygAEWY6SlzzNGAaLkZXizqDbo2CIWFR23VzcY
Here's the link for the Bootloader for your phone:
https://mega.co.nz/#!64pwGboB!aCMhkHXCGhKofNZVUhc4PdnOalD7oBtpdQhKgG5PQas
They need to be flashed via Odin.
All you have to do is put your phone in download mode.
Power Off.
Hold Power Button + Home Button + Volume Down button
The phone will ask you to accept or not
Press the Volume Up Button to enter download mode
The screen should say "Downloading, Do not turn off target"
Connect your phone to your laptop/PC and let drivers install.
Download Odin (any version), v3.07 and 3.09 work fine for me.
Once your phone is detected, one of the rectangles in Odin should turn either yellow or blue and say the COM:ID of your phone.
Once that is done, press BL and select the bootloader file.
Then press Phone (which is modem) and select the GSM/LTE modem file.
Once they are added to Odin successfully, press Start.
It'll take barely a minute.
Once it says PASS in Odin, reboot your phone.
Do a HARD reset.
Then insert your EE SIM and see if it works.

murtaza02 said:
All you have to do is put your phone in download mode.
Power Off.
Hold Power Button + Home Button + Volume Down button
The phone will ask you to accept or not
Press the Volume Up Button to enter download mode
The screen should say "Downloading, Do not turn off target"
Connect your phone to your laptop/PC and let drivers install.
Download Odin (any version), v3.07 and 3.09 work fine for me.
Once your phone is detected, one of the rectangles in Odin should turn either yellow or blue and say the COM:ID of your phone.
Once that is done, press BL and select the bootloader file.
Then press Phone (which is modem) and select the GSM/LTE modem file.
Once they are added to Odin successfully, press Start.
It'll take barely a minute.
Once it says PASS in Odin, reboot your phone.
Do a HARD reset.
Then insert your EE SIM and see if it works.
Click to expand...
Click to collapse
Thanks so much for your detailed reply. I have never done anything to the software on my phone before. Do you have a link or anything for a really basic step by step guide for this? I just don't want to get anything wrong and risk bricking my phone.
UPDATE 1: I did manage to follow your instructions after reading them a couple of times. Thanks very much for your help. I installed Odin 3.09, and added the BL and CP and did a hard reset. Everything worked well but it is still showing "Invalid SIM card" message with the EE sim. Any other ideas of where I can go from here?
UPDATE 2: I have followed this guide here to re-install the stock firmware for the GT-I9505. I installed the UK BTU 5.0.1 firmware. All went perfectly and I did a hard reset afterwards. The devices is still showing the "Invalid SIM card" error. Could this be a hardware issue after all?

tomedwards93 said:
Thanks so much for your detailed reply. I have never done anything to the software on my phone before. Do you have a link or anything for a really basic step by step guide for this? I just don't want to get anything wrong and risk bricking my phone.
UPDATE 1: I did manage to follow your instructions after reading them a couple of times. Thanks very much for your help. I installed Odin 3.09, and added the BL and CP and did a hard reset. Everything worked well but it is still showing "Invalid SIM card" message with the EE sim. Any other ideas of where I can go from here?
UPDATE 2: I have followed this guide here to re-install the stock firmware for the GT-I9505. I installed the UK BTU 5.0.1 firmware. All went perfectly and I did a hard reset afterwards. The devices is still showing the "Invalid SIM card" error. Could this be a hardware issue after all?
Click to expand...
Click to collapse
Firstly, I'm glad you installed the new OB8 modem.
Secondly, I'm just not getting convinced of the fact that this is a hardware problem. If it was, the other SIM (T-Mobile) wouldn't have worked on it.
Have you tried the EE SIMs in another phone? Also, were the SIMs issued recently or are they old ones?
T-Mobile and EE are the same network though aren't they, so I don't understand why the phone isn't accepting the SIM card.
A question for you, did you have your number ported to EE from T-Mobile or is it an entirely new number on EE?
I read on a few forums that when the number gets ported from a different carrier, the phone shows an Invalid SIM when you insert it until EE has fully ported the number.
However, if that's the case then the PAYG SIM card should've worked.
And the last question, was the device on contract from T-Mobile?
EDIT: After reading your first post again, you said that the EE PAYG SIM showed a 'No SIM' error, but the contract one showed an 'Invalid SIM' error. I have a feeling it's a SIM problem and not a hardware/software issue.
Ask EE to issue you a brand new SIM and first try it in another phone, if it works, then pop it in your S4.

Help Restoring network operation of S8 active.

Okay so i tried the SamFail Rom / Root. 5 seconds into the root i got an error, a PIT fail code. The phone which is a carrier unlocked one went into an infinite boot loop on the recovery screen, and wouldn't let me enter the recovery options. I tried many hard resets, took out the battery, and even let it drain but nothing helped, it would just boot loops into the downloading update / Error . After all this i decided to try to flash the original firmware into it. Only thing is i didn't write down the software version. But since i have t mobile i thought why not just flash it with the latest tmobile software. So i did.
Now the phone turns on and everything works but it wont connect to the network. IMS registration status is not registered, Mobile network state is Disconnected but it does say T-Mobile which is my carrier.
Under the Odin download mode, before i even flashed it at the top left under carrier IT said SPR so i figured the phone was originally a sprint phone then unlocked and sold by the company. so i also tried the SPRINT software but same thing happens.
Under Co figuring Service it just stays registering then says " Please contact your service provider....." internal error -1.
Under UICC Unlock it says Your device is unlocked for any SIM card but then when i click it, it says SIM unlocking could not be completed please try again later. Internal Error 407.
Any help or insight would be appreciated. i don't care about the root anymore i just want the phone to work normally, Thanks.
---------------------------------------------------------
:Edit - I messed with it enough now it shows LTE service and everything but the. SPRINT OMADM Message wont go away. And the Carrier Hub - Requests are processing wont go away. also i get very minimum service if any at all. . Any help? Thanks.

Click on settings app->apps->click 3 dots button at upper right corner->click show systemapps-> search Sprint OMADM app and force stop it

[Question] J500-FN Wont detect Wi-Fi after factory reset.

Hey folks, my Dad got a Sansung J500-FN (2016) from his friend and is now having a problem setting it up.
Problem:
He performed a factory reset on the device and now it wont find a network connection during the setup.
After selecting the landuage, it just sits there scanning for available connections and never finds any.
Tried:
Clearing cache and further factory resets (With and without several different SIM cards)
Connecting through WPS (It times out)
Entering the network details manually
The Wi-Fi in the house is bradcasting it's SSID and other devices are connected to it and working without issue.
Question:
Is there anything we can do to get past this stage of the setup or force it to connect?
Would flashing a stock ROM resolve the issue and can this be done via a SD card (USB debugging/Developer options are off as the PC wont detect the device).
The device is completley stock at the moment.
I'm at a bit of a loss as what to try next and seem to be going round in circles trying to find a solution, so any advice would be greatly appreciated.
I haven't played around with this stuff since my Galaxy ACE
If you need any further infor just let me know.
Cheers
Oxydin

Hi,
The problem may get solved by flashing the latest Firmware!
If you want to flash Official Samsung stock rom /firmware, you have got to use ODIN which works from a windows PC with the mobile connected through USB wire when in the Download Mode ( Recovery Mode>Boot Loader> Download Mode ) & it needs that your device is detected by the PC as an MTP device i.e. it shows in the Computer folder with a mobile icon & files can be transferred between the PC & Mobile when connected. For USB debugging some Samsung USB drivers would be needed to install on the Windows PC but developer mode is not needed on the mobile.
Don't just go ahead but to give you an idea as to what you are going to do in the near future : Update/Flash/Unbrick your device via Odin
1. I suppose you are running Windows 8 or later on the PC. Get to know what is wrong with the PC or Operating System : Try another PC, Try another Operating System, Try another USB port, Try another USB connecting wire. Check whether 'Auto Play' is selected in the Operating System settings. Is it all well in the 'Device Manager' before & after connecting the mobile ? When you connect the mobile to PC, the PC should be connected to the internet. 'Device Installation settings' should be set to automatically install drivers from windows update. ( It would be better if you can make a system image for precaution & install pending windows updates )
2. In which country you are using the device ? Which is the Internet Provider ? Did you try another Wifi services ? What is the usability of the device at the moment : Can You use the mobile data ? What is the CSC of the installed firmware on your device ? ( I am interested Just in the CSC Code! )
Let us know.
Thanks.

Thank you for the reply @LittlePro
1.
The computer is running Winows 10 Build 19043
It is connected to the internet via Wi-Fi and this is working as good as it gets in my location.
Autoplay is on (Set to 'Ask me everytime')
Samsung USB drivers are installed and Windows update set to automatically download.
* Swapping ports/cables and trying a different Wi-Fi etc will take time. I am currently confined to bed following a motorcycle accident a couple years ago (Damn Pressure Sores). Next time I'm back in the wheelchair I'll try this and update. It may be due to the port or USB extension I'm using (The PC does detect my Alcatel phone without issues)*
2.
In which country you are using the device ? Portugal
Which is the Internet Provider ? MEO
Did you try another Wifi services ? Not yet, this will take time (See * above)
What is the usability of the device at the moment ?
I can access Recovery/Download modes (Vol Up+Home+Power/Vol Down+Home+Power)
When starting the device normally, It asks me to choose a language and then moves to the 'Scanning for Wi-Fi' screen. It goes no further than this.
Can You use the mobile data ?
After a factory reset there is a popup message asking if I want to turn mobile data on/off. This is set to On, but it doesn't seem to use mobile data.
What is the CSC of the installed firmware on your device
The device was originally in the UK with an EE contract the CSC is - EVR
As soon as I can, I'll try the other suggestions and post an update.
Appreciate the the info, thank you.
Oxydin

Hi,
Oxydin said:
The device was originally in the UK with an EE contract the CSC is - EVR
Click to expand...
Click to collapse
That means it is branded. That may be locked to use with EE services. You should look for a firmware for the model : SM-J500FN & Region : TPH
TPH is unbranded firmware for Portugal. My first choice would be that. If you want latest firmware, it comes from Spain unbranded : PHE
The other option may be BTU which is unbranded from UK.
The way to download for me would be either there .That needs membership OR the tool as there.
Let me know.
Thanks. ...
EDIT : It seems MEO from Portugal, PHE from Spain & BTU from UK!

UPDATE:
Managed to get my lazy ass out of this bed, so I was able to check cables/ports.
The USB cable I was using would charge the phone (albeit very slowly) but wouldn't allow data transfer.
Swapped this with another cable and now the PC detects the phone without issue.
I've updated the firmware to the one from spain (PHE). The one from Portugal (TPH) installed the Unbranded firmware for Romania (ROM) for some reason.
Both installed without issue, but I figured if the latest version was the Spanish one, I may aswell use that.
Unfortunately I'm back to the initial problem.
I can select my language and then I'm stuck on the 'Scanning for networks' screen.
There is a new message that appears, saying - An unauthorized attempt has be made to factory reset your device. Please log into your account to verify your identity. Convinced this phone is now just laughing at me lol
I still need to get out of the house to try some other Wi-Fi networks, to see if it just doesn't like my home Wi-Fi
Will update again once this is done or I figure anything else out.
Cheers
Oxydin

Hi!
Oxydin said:
The one from Portugal (TPH) installed the Unbranded firmware for Romania (ROM) for some reason.
Click to expand...
Click to collapse
It seems TPH is a service provider in Portugal & the unbranded one from Portugal is MEO ?
Oxydin said:
There is a new message that appears, saying - An unauthorized attempt has be made to factory reset your device. Please log into your account to verify your identity. Convinced this phone is now just laughing at me lol
Click to expand...
Click to collapse
The device is connected to a particular Google Account which was previously used on this device. Try flashing CSC instead of CSC_HOME. There are also other options in the ODIN but honestly I am not sure about their consequences!
Let us know.
Thanks. ...

Yeah the unbranded one for Portugal seems to be MEO, so I've installed this one (This also happens to be my ISP)
The device still wont detect a W-Fi network.
At this point, I'm beginning to think that there may be a problem with the device itself.
So I'm currently looking around for something to test this.
All the files I downloaded only had one CSC file in them (There was no CSC_HOME). The current file is -
CSC_MEO_J500FNMEO1BQA1_CL10432640_QB12297267_REV00_user_low_ship_MULTI_CERT.tar
I figured that was what that message meant. If only I could progress to that stage.
Guess I'll keep searching. On the brightside, I'm learning a bit more about phones.
Cheers
Oxydin