[Q] How to Upgrade rooted MF3 4.2.2 - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

Hello,
My device is currently rooted on 4.2.2 (Baseband MF3) . How can I upgrade it to 4.4 (and maintain root) ?
Thanks!
S4 At&T Unlocked device

s4attuser said:
Hello,
My device is currently rooted on 4.2.2 (Baseband MF3) . How can I upgrade it to 4.4 (and maintain root) ?
Thanks!
S4 At&T Unlocked device
Click to expand...
Click to collapse
Use Odin and flash either the MK2 or NB1 update, and then follow http://forum.xda-developers.com/showthread.php?t=2680868 to get to rooted 4.4.

Thr33-F0ur said:
Use Odin and flash either the MK2 or NB1 update, and then follow http://forum.xda-developers.com/showthread.php?t=2680868 to get to rooted 4.4.
Click to expand...
Click to collapse
Thanks for the reply!
Where can I find the MK2 or NB1 Update? Is there one safer to update to than the other (as I see different instructions for each) ?
Thanks again!

MK2 is a little easier, since you won't have to downgrade. You can find links to both in the OP of the All things MK2 and NB1 thread under "return to stock".
Sent from my SGH-I337 using XDA Free mobile app

s4attuser said:
Hello,
My device is currently rooted on 4.2.2 (Baseband MF3) . How can I upgrade it to 4.4 (and maintain root) ?
Thanks!
S4 At&T Unlocked device
Click to expand...
Click to collapse
MK2 is the last firmware version with an exploitable kernel that allows for a direct rooting method, e.g. saferoot. You can flash the MK2 Odin .tar in Odin's PDA slot(AP in Odin v3.09+): http://www.androidfilehost.com/?fid=23501681358541050
From there you can obtain stock, rooted, NC1(latest 4.4.2 firmware) by following this guide: http://forum.xda-developers.com/showpost.php?p=52167774&postcount=3

Related

Kitkat update

Hi guys
Im trying to update my phone to kitkat.
The OTA update of AT&T doesnt even show there is an update .It says current softwae is up to date.
so i thought to put a stock rom via Odin.
Can i use the i9505rom from sammobile?
leon2810 said:
Hi guys
Im trying to update my phone to kitkat.
The OTA update of AT&T doesnt even show there is an update .It says current softwae is up to date.
so i thought to put a stock rom via Odin.
Can i use the i9505rom from sammobile?
Click to expand...
Click to collapse
If that is the Model of your cellphone.
tailgunner9 said:
If that is the Model of your cellphone.
Click to expand...
Click to collapse
My model is SGH-I337
why else would i post it here?
leon2810 said:
Hi guys
Im trying to update my phone to kitkat.
The OTA update of AT&T doesnt even show there is an update .It says current softwae is up to date.
so i thought to put a stock rom via Odin.
Can i use the i9505rom from sammobile?
Click to expand...
Click to collapse
No, you can't flash the i9505 firmware. There are nb1 and mk2 tar files available. Look in the general forum
Sent from my Nexus 5
jd1639 said:
No, you can't flash the i9505 firmware. There are nb1 and mk2 tar files available. Look in the general forum
Sent from my Nexus 5
Click to expand...
Click to collapse
So should i upgrade to mk2 and then to nb1 if my current version is 4.2.2
or i can upgrade directlly to nb1?
leon2810 said:
So should i upgrade to mk2 and then to nb1 if my current version is 4.2.2
or i can upgrade directlly to nb1?
Click to expand...
Click to collapse
you should be able to upgrade directly to nb1. search around the forums here for the Odin files.
If you are interested in being rooted... flash mk2.. then root uaing saferoot
Sent from my Deadly Venom SS 3.0 S4 ~ 20GB free cloud https://copy.com?r=vtiraF

MF3 Upgrade Help

So I rooted my galaxy s4 AT&T and I rooted it while on mf3. Can I upgrade in kies or ota without breaking my phone? I don't care whether I keep my root or not.
dantheman1024 said:
So I rooted my galaxy s4 AT&T and I rooted it while on mf3. Can I upgrade in kies or ota without breaking my phone? I don't care whether I keep my root or not.
Click to expand...
Click to collapse
Download the NB1 stock tar from http://forum.xda-developers.com/showthread.php?t=2616221 and flash using Odin.
jmjoyas said:
Download the NB1 stock tar from http://forum.xda-developers.com/showthread.php?t=2616221 and flash using Odin.
Click to expand...
Click to collapse
Ok, thank you!

Rooted AT&T 4.3 MK2 upgrading to 4.4.2 (and root)?

Hi,
I read the news that 4.4.2 is out. Is it really out?
I have stock ROM rooted using vroot. I've disabled the updates so it's still on 4.3 MK2.
Is there a safe process to upgrade to the latest 4.4.2? Any way to keep root or re-root?
Thanks
redhonker said:
Hi,
I read the news that 4.4.2 is out. Is it really out?
I have stock ROM rooted using vroot. I've disabled the updates so it's still on 4.3 MK2.
Is there a safe process to upgrade to the latest 4.4.2? Any way to keep root or re-root?
Thanks
Click to expand...
Click to collapse
There is no root for 4.2.2, nb1. There is a tar file that can be used in Odin. There is also a work around so you can run a 4.4.2 rooted rom. See the general forum
Sent from my SAMSUNG-SGH-I727

Help with Rooting

Helping out a friend with an S4 with on NB1. Phone has been sitting for a while. He wants me to set it up with a custom rom or at least root it. Have dabbled with the Verizon S4 but never with the AT&T version.
Can the bootloader be unlocked on NB1?
If not, an you go back to an older release to unlock the bootloader?
Is there a prefered root method for NB1?
Is there any benefit in staying with Nb1 vs taking the OTA?
Thanks
BB
Bad Bimr said:
Helping out a friend with an S4 with on NB1. Phone has been sitting for a while. He wants me to set it up with a custom rom or at least root it. Have dabbled with the Verizon S4 but never with the AT&T version.
Can the bootloader be unlocked on NB1?
If not, an you go back to an older release to unlock the bootloader?
Is there a prefered root method for NB1?
Is there any benefit in staying with Nb1 vs taking the OTA?
Thanks
BB
Click to expand...
Click to collapse
The bootloader stlll cannot be unlocked on ATT S4. We still have a working recovery "safestrap". Safestrap doesnt replace existing stock recovery but is available during normal boot mode through a splash screen on bootup. Use safestrap version 3.72 or 3.75 and flash into stock slot itself. In case of issues, the phone can be recovered by Odin flashing the full NB1 firmware.
NB1 is not rootable. The next version NC1 is rootable with "towelroot". The latest NI1 is not directly rootable but can be rooted by Odin flashing the NC1 kernel.
You can manually update to NC1 and root.
There are a large number of ROMS that can be flashed on I337 including google play edition ones. AOSP/AOKP roms dont work though.
More info: All Thing AT&T
jmjoyas said:
The bootloader stlll cannot be unlocked on ATT S4. We still have a working recovery "safestrap". Safestrap doesnt replace existing stock recovery but is available during normal boot mode through a splash screen on bootup. Use safestrap version 3.72 or 3.75 and flash into stock slot itself. In case of issues, the phone can be recovered by Odin flashing the full NB1 firmware.
NB1 is not rootable. The next version NC1 is rootable with "towelroot". The latest NI1 is not directly rootable but can be rooted by Odin flashing the NC1 kernel.
You can manually update to NC1 and root.
There are a large number of ROMS that can be flashed on I337 including google play edition ones. AOSP/AOKP roms dont work though.
More info: All Thing AT&T
Click to expand...
Click to collapse
So the easiest would be to Odin to a stock NC1 and you towelroot.
Any links to the stock NC1?
Thanks
BB
Bad Bimr said:
So the easiest would be to Odin to a stock NC1 and you towelroot.
Any links to the stock NC1?
Thanks
BB
Click to expand...
Click to collapse
We do not have odin file for both NC1 and NI1. There is an update file that can be used with "adb sideload" to update your phone. How to update to NC1 is there in the link I provided.
jmjoyas said:
We do not have odin file for both NC1 and NI1. There is an update file that can be used with "adb sideload" to update your phone. How to update to NC1 is there in the link I provided.
Click to expand...
Click to collapse
I tried towelroot to see if it works. It worked without a hitch. So I guesss the newest version works with NB1.
Thanks

S4 Back to Stock, TowelRoot NC1(I Think)

Right now I am running a AT&T Galaxy S4 rooted with towel root 4.4.2, and I have to send in my phone for repair because the screen is messed up. I think it is running the NC1 bootloader, as under Setting->About Device-> Baseband version and it is i337UCUFNC1. I have looked over the ODIN back to stock guides and do not see a stock rom for the NC1. Was wondering if its alright to use the NB1 update or should I be looking for something else. The build number is KOT49H.I337UCUFNC1. Thank you for any help.
seandidk said:
Right now I am running a AT&T Galaxy S4 rooted with towel root 4.4.2, and I have to send in my phone for repair because the screen is messed up. I think it is running the NC1 bootloader, as under Setting->About Device-> Baseband version and it is i337UCUFNC1. I have looked over the ODIN back to stock guides and do not see a stock rom for the NC1. Was wondering if its alright to use the NB1 update or should I be looking for something else. The build number is KOT49H.I337UCUFNC1. Thank you for any help.
Click to expand...
Click to collapse
There is no full firmware for NC1. We only have an update over NB1.
You can safely flash NB1 using Odin.
Gotcha, thank you for the clarification .
So I can grab any NB1 stock file? Also is there any reason why not to grab the file from Sam Mobile?
seandidk said:
So I can grab any NB1 stock file? Also is there any reason why not to grab the file from Sam Mobile?
Click to expand...
Click to collapse
Sammobile for some reason doesnt have the newer firmwares, has only MDB and MDL.
Read the return to stock of All Things AT&T

Categories

Resources