[Q&A] JasmineROM Discussions [Chat Room] - Verizon Galaxy Note 3 Q&A, Help & Troubleshooting

.
This is the place for Q&A, general discussions, and post-installation chat about JasmineROM. Please keep your personal issues that are not related to the development, such as themes and other stuff, here.
.

great idea!!!
now we can talk reception, themes, etc.. without stealing from your rom thread.
thanks again

fletch33 said:
great idea!!!
now we can talk reception, themes, etc.. without stealing from your rom thread.
thanks again
Click to expand...
Click to collapse
Did you get your replacement phone in? How's the reception?

bd177 said:
Did you get your replacement phone in? How's the reception?
Click to expand...
Click to collapse
they sent it to the wrong address and so it is not arriving until this afternoon and will test and report asap.

OK i have the replacement phone and am using it and it clearly gets a better signal on MJE as it arrived. where i am using it and after upgrading to 4.2.2 i would get No Mobile Network and that doesnt seem to be happening or show any signs of happening by signal strength.
what if anything should i test/try before root and upgrade?
sidenote: root was needed asap as the N3 tried to download KK almost every 2 minutes and had to freeze SDM just to use it without turning off data.

bd177 said:
Did you get your replacement phone in? How's the reception?
Click to expand...
Click to collapse
replacement fixed my connection problems even after upgrading to 1.3.3 and NC4 modem. bad news is they sent me a unit with a dent in the side metal frame and so gonna have to do this all over again

fletch33 said:
replacement fixed my connection problems even after upgrading to 1.3.3 and NC4 modem. bad news is they sent me a unit with a dent in the side metal frame and so gonna have to do this all over again
Click to expand...
Click to collapse
Glad to know your problem has been fixed. It isn't that bad; you can upgrade directly to 1.4 uploading to XDA with several failures will upload to Mega, more reliable & faster

hsbadr said:
Glad to know your problem has been fixed. It isn't that bad; you can upgrade directly to 1.4 uploading to XDA with several failures will upload to Mega, more reliable & faster
Click to expand...
Click to collapse
well i am having them send me another one since i am sending them a perfect condition until and they should send me back the same.
on a side note did you see this i posted? it of course went away when i went to Jasmine but was interesting.
also you probably already saw this but i posted about the root found for S5 which means probably hitting us soon for Note 3. surprised that thread didnt take off.

fletch33 said:
did you see this i posted? it of course went away when i went to Jasmine but was interesting.
Click to expand...
Click to collapse
This app comes with Kingo Root after copying the SuperSU binary, the device reboots & installs this app. I always disconnect it after reboot to avoid installing it.
fletch33 said:
also you probably already saw this but i posted about the root found for S5 which means probably hitting us soon for Note 3. surprised that thread didnt take off.
Click to expand...
Click to collapse
will look into this when released...

hsbadr said:
This app comes with Kingo Root after copying the SuperSU binary, the device reboots & installs this app. I always disconnect it after reboot to avoid installing it.
will look into this when released...
Click to expand...
Click to collapse
i have used Kingo but never seen that. haha i thought Sammy did it
thanks

fletch33 said:
i have used Kingo but never seen that. haha i thought Sammy did it
Click to expand...
Click to collapse
I think this app is a pirated store like jailbreaking in iOS so, Samsung will never ever do it :laugh:

Only issue I have seen on 1.4 is the settings keep fc'ing in the browser . Also , white lettering in the browser menu makes it difficult to read . Otherwise , it's been running great !
Sent from my SM-N900V using Tapatalk

mjh68 said:
Only issue I have seen on 1.4 is the settings keep fc'ing in the browser . Also , white lettering in the browser menu makes it difficult to read . Otherwise , it's been running great !
Click to expand...
Click to collapse
It's a known issue with S5 browser; that's why I left it harder to read. Check Post #2 for more details. You can handle it, revert to Note 3 browser or use the builtin Chrome, which is better for me. Some S5 apps require S5 firmware & so, they're working perfect on v2.0.

hsbadr said:
It's a known issue with S5 browser; that's why I left it harder to read. Check Post #2 for more details. You can handle it, revert to Note 3 browser or use the builtin Chrome, which is better for me. Some S5 apps require S5 firmware & so, they're working perfect on v2.0.
Click to expand...
Click to collapse
it's not that big of a deal, I can deal with it [emoji4]
Sent from my SM-N900V using Tapatalk

fletch33 said:
replacement fixed my connection problems even after upgrading to 1.3.3 and NC4 modem. bad news is they sent me a unit with a dent in the side metal frame and so gonna have to do this all over again
Click to expand...
Click to collapse
You do realize you should be running the MJE modem on 1.3.3/1.4, right? You upgrade to NC2 or the full MJE upgrade process with JasmineROM 1.4, then you go back into download and flash the MJE modem. Tons of people here have had to do that - I get much better reception on MJE modem. There are no issues with running MJE modem on NC2/NC4 firmware (stock, Baja, Jasmine, Hyperdrive, etc)

bigillz said:
You do realize you should be running the MJE modem on 1.3.3/1.4, right? You upgrade to NC2 or the full MJE upgrade process with JasmineROM 1.4, then you go back into download and flash the MJE modem. Tons of people here have had to do that - I get much better reception on MJE modem. There are no issues with running MJE modem on NC2/NC4 firmware (stock, Baja, Jasmine, Hyperdrive, etc)
Click to expand...
Click to collapse
That was my plan initially but right now on the NC4 firmware my reception and speeds are as good as they have ever been since release date so unless that changes I am staying right here
I appreciate the info

fletch33 said:
That was my plan initially but right now on the NC4 firmware my reception and speeds are as good as they have ever been since release date so unless that changes I am staying right here
I appreciate the info
Click to expand...
Click to collapse
Sure, just pointing out that firmware and modem are unrelated. I run MJE modem on NC4 firmware. It takes literally about 2 minutes to flash different modems, so you may still want to try MJE and NC2 modems on your current firmware to see how they compare to NC4 modem.

Loaded up 1.4 so far with no problems so far. One question I do have is how do I get rid of that pesky WiFi connected notification? I tried wanam but it still seems to show up. I don't want it to even show up the first time.
Sent from my SM-N900V using XDA Free mobile app

JasmineROM 1.5 Beta NC4
JasmineROM 1.5 Beta 2 NC4
Device: Verizon Galaxy Note 3
Current Base: Stock OTA KK 4.4.2 (Rooted) NC4
Recovery: Safestrap 3.72
Initial Findings:
*device does not boot (beta 2)

Were ypu able to boot back into safestrap?
Sent from my SM-N900V using Tapatalk

Related

[Q] MF9 update issues

Hello everyone.
I recently got a GS4, and it has the MF9 update. I've been suffering from poor data connection, dropped signal, etc. After doing some searching, I've found that it is a well known problem.
My questions for you guys:
1) If I root and install a custom rom based on MF9, will I have the same issues?
2) Would I be better off just rooting and installing the latest OTA before MF9?
Thank you!
Custom rom might help. I'm stock rooted mf9 and have no problem whatsoever.
bjb_nyj101 said:
Hello everyone.
I recently got a GS4, and it has the MF9 update. I've been suffering from poor data connection, dropped signal, etc. After doing some searching, I've found that it is a well known problem.
My questions for you guys:
1) If I root and install a custom rom based on MF9, will I have the same issues?
2) Would I be better off just rooting and installing the latest OTA before MF9?
Thank you!
Click to expand...
Click to collapse
I'm sacs custom Rom and have no connectivity issues I highly recommend it.
Sent from my SPH-L720 using XDA Premium 4 mobile app
bjb_nyj101 said:
Hello everyone.
I recently got a GS4, and it has the MF9 update. I've been suffering from poor data connection, dropped signal, etc. After doing some searching, I've found that it is a well known problem.
My questions for you guys:
1) If I root and install a custom rom based on MF9, will I have the same issues?
2) Would I be better off just rooting and installing the latest OTA before MF9?
Thank you!
Click to expand...
Click to collapse
Your connections issues are with your phone (hardware or software), sprint's network or you location.
Doubtful that a ROM will make 'much' difference if you already have problems.
What might help is starting at complete stock MF9 - rwilco12 has a full 'one-click' with root here There is also a full wipe (clears the data partition too) that might be a better option for starting out.
Then once you get your phone activated update the PRL and then the Profile.
THEN maybe start thinking about ROMs. Spend some time looking reading and then reading some more and you will find what you need.
Im having signal issues but they are workinh on lte upgrades right now in my area I got much better connection today after flash comadose mod, I went from around 500 kbps to 2 mbps quite a change and I love it but im still having trouble with 3g dropping out completely still in areas I get 2mbps and then it comes back after like a couple mins sometimes I see an ehrpd error code when it happens
Sent from my SPH-L720 using Xparent Skyblue Tapatalk 2
leaderbuilder said:
Your connections issues are with your phone (hardware or software), sprint's network or you location.
Doubtful that a ROM will make 'much' difference if you already have problems.
What might help is starting at complete stock MF9 - rwilco12 has a full 'one-click' with root here There is also a full wipe (clears the data partition too) that might be a better option for starting out.
Then once you get your phone activated update the PRL and then the Profile.
THEN maybe start thinking about ROMs. Spend some time looking reading and then reading some more and you will find what you need.
Click to expand...
Click to collapse
Thanks for all the great info. I'm just at a loss as to what the problem could be. I don't think it's the phone itself; the previous owner said he had zero issues with it. I thought it could be Sprint's crappy network, but I activated my iPhone 5 for a few hours and had none of the issues I have on the GS4
bjb_nyj101 said:
Thanks for all the great info. I'm just at a loss as to what the problem could be. I don't think it's the phone itself; the previous owner said he had zero issues with it. I thought it could be Sprint's crappy network, but I activated my iPhone 5 for a few hours and had none of the issues I have on the GS4
Click to expand...
Click to collapse
Well since you say you got it used - from someone else, I'd re-iterate reloading the entire stock MF9 from the .tar (or one-click) to reload/reset all partitions and take it back to stock. Without starting fresh you (and us here) have no real idea what is on it.
Then again with what I recommended previously.
leaderbuilder said:
Well since you say you got it used - from someone else, I'd re-iterate reloading the entire stock MF9 from the .tar (or one-click) to reload/reset all partitions and take it back to stock. Without starting fresh you (and us here) have no real idea what is on it.
Then again with what I recommended previously.
Click to expand...
Click to collapse
Yeah, I did restore it back to stock MF9 and the problem persists
bjb_nyj101 said:
Yeah, I did restore it back to stock MF9 and the problem persists
Click to expand...
Click to collapse
Did you restore via Odin? or just the zip(s)
If problem persists after full Odin to stock, updating PRL and Profile then I'd say it's your device. Look at warranty. You could try some tweaks like ComaDose etc. But if they don't do the trick then I don't know.

[Q] Revert to stock rom

ok so i have installed JellyBeans rom and im not liking it. im on base version JSS15J.N900VVRUBMJE.
how do i get back to the most updated stock rom on note 3?
Am assuming that you are using SafeStrap. If so, boot to recovery. Go into boot options and activate the "stock" slot. Then, if you want to, you can go in and delete rom slot that you have beans installed on.
Once you activate the stock slot, you'll know it because it will tell you with red text across the top of the screen.
Then just reboot.
IF YOU INSTALLED BEANS ROM ON THE STOCK SLOT, you need to download a copy of the stock odex or deodex rom that beans put together in the dev thread. If this is the case, let us know if you need help before going any further!
♢NoteIII♢
Yes I made a new slot for beans and still have the stock one open. Thanks ill just use the stock slot. Now what about me getting the latest updated stock rom and still keep root, how would I do that?
Sent from my SM-N900V using XDA Premium 4 mobile app
spetzuu said:
Yes I made a new slot for beans and still have the stock one open. Thanks ill just use the stock slot. Now what about me getting the latest updated stock rom and still keep root, how would I do that?
Sent from my SM-N900V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So the rooted rom on your stock slot is what version?
♢NoteIII♢
LeftyGR said:
So the rooted rom on your stock slot is what version?
♢NoteIII♢
Click to expand...
Click to collapse
MI9
spetzuu said:
MI9
Click to expand...
Click to collapse
Eh...
Best way would mean you'd need to redo root. And that way would be with odin. Unless someone else has a better way?
♢NoteIII♢
ive tried finding out the benefits of the updates that have rolled on on the note 3 and i cant seem to find any... although i have seen people complaining about the battery life and what not.
do you know where i could get a complete list of what the updates bring to phone? because if its nothing major ill just stick to MI9
Honestly, it will be different for every person. Because even though we all have the same phone, Every Phone is just a little different. For example, I am on the current update and felt I needed to because I was having issues with wifi. But if you are on the original firmware, which you are, and you can find no problem with your phone that you would like to see fixed then I honestly don't see any point in updating your firmware if you do not want to. I know that the current version addresses problems people were having with wifi. Along with some other minor changes.
Now having said that... If you encounter any quirks or problems with any current custom ROMs that are listed in the development section, it may be due to the fact that they are built on the current firmware version while you are still two versions behind.
♢NoteIII♢

HELP NEEDED. Lost GPS after 2 months of no issues

$20 via paypal to the person who can get me up and running again.
GPS is very important for my line of work, and I'm trying not to panic.
I'm on MK2. I've been using stock and SHOstock ROM flawlessly since getting the phone just before Christmas. I've NEVER had any GPS issues. Ever.
I decided to flash the Safestrap version of Hyperdrive on ROM Slot 1, along with MK2 kernel module. Installed fine. I flipped back to STOCK rom(SHOstock), until I had time to mess with the new ROM. On the way home from work, I realized I had no GPS.
Using GPS Tools and GPS Fix apps, no satellites showing at all.
I've done everything I can think of, including using ODIN to flash back to stock MK2. Still no dice.
Can anyone give a guy a hand? I'm currently running stock and have re-rooted using saferoot(the same way I rooted previously).
Thanks in advance!
Dlnp22 said:
GPS is very important for my line of work, and I'm trying not to panic.
I'm on MK2. I've been using stock and SHOstock ROM flawlessly since getting the phone just before Christmas. I've NEVER had any GPS issues ever.
I decided to flash Safestrap version of Hyperdrive on ROM Slot 1, along with MK2 kernel module. I flipped back to STOCK rom(SHOstock), until I had time to mess with the new ROM. This was all yesterday, at work(shh!). On the way home, no GPS.
I've done everything I can think of, including using ODIN to flash back to stock. Still no dice.
Can anyone give a guy a hand? I'm currently running stock and have re-rooted using saferoot(the same way I rooted previously).
p.s.- I've checked location services..everything's checked.
Thanks in advance!
Click to expand...
Click to collapse
I've used this app in the past on my GS3 but it might work here.
https://play.google.com/store/apps/details?id=com.cochibo.gpsstatus&hl=en
Also This post (on another forum was quite informative and it's worth a shot)
http://androidforums.com/samsung-galaxy-s4/761247-gps-fix-dummies-guide.html
There used to a method that involved the service menu on the GS3 but I'm not sure if it still applied
hednik said:
I've used this app in the past on my GS3 but it might work here.
https://play.google.com/store/apps/details?id=com.cochibo.gpsstatus&hl=en
Also This post (on another forum was quite informative and it's worth a shot)
http://androidforums.com/samsung-galaxy-s4/761247-gps-fix-dummies-guide.html
There used to a method that involved the service menu on the GS3 but I'm not sure if it still applied
Click to expand...
Click to collapse
Yes, I've had that message forum(2nd link) saved for some time now. I've done everything in that thread and used the GPS app tools, and nothing has helped. Can't locate ANY satellites.
Dlnp22 said:
Yes, I've had that message forum(2nd link) saved for some time now. I've done everything in that thread and used the GPS app tools, and nothing has helped. Can't locate ANY satellites.
Click to expand...
Click to collapse
No possbility of a hardware issue ?
hednik said:
No possbility of a hardware issue ?
Click to expand...
Click to collapse
Nothing has happened to the phone(no drops/spills/etc). It started right after flashing the new ROM, so I'm fairly certain it has to be related.
Did u try flashing older modem / baseband. .... I read that couples people confirmed by using MDL modem. .... check your PM....
Swyped from MK2 Dark Venomous X1
ted77usa said:
Did u try flashing older modem / baseband. .... I read that couples people confirmed by using MDL modem. .... check your PM....
Swyped from MK2 Dark Venomous X1
Click to expand...
Click to collapse
Ted, per our extended private message convo on Friday, thanks for giving me a good shove in the right direction!
Dlp22, I have the same problem, did you solve it?
any suggestion!
I had the same problem after upgrading to MK2, almost on the verge of getting rid of GS4 and switching to another device. But for now, I have fixed it by installing Hyperdrive RS13 using Safestrap on Stock slot (did take a backup of the stock slot before wiping it out)...

Help a noob get PAC on his phone

I've hard bricked this thing once trying to flash a rom once. Tried to gain custom recovery via AUTOREC. Should be called Autowreck.
Sometimes it is best just to ask to be pointed in the right direction.
I just learned about LOKI and SAFESTRAP. BUT are these just for TW based ROMS? I want a CM based ROM. PACROM, specifically. I see others with this AT&T phone running it.
Will someone please help a noob with a tutorial or advice and stop me from running in circles? W/ rooted 4.4.2, NC1 build.
Start with reading well the SafeStrap thread by Hashcode in Q&A
and the All Thinks ATT, MK2 in General
You can only use SafeStrap and can not flash non TW roms or custom recoveries/kernels, so CM AOSP etc
Sorry
rugmankc said:
Start with reading well the SafeStrap thread by Hashcode in Q&A
and the All Thinks ATT, MK2 in General
You can only use SafeStrap and can not flash non TW roms or custom recoveries/kernels, so CM AOSP etc
Sorry
Click to expand...
Click to collapse
Been reading the safe strap thread. 89 pages! Stumped on the first one. ENCRYPTED? Not sure. How do I tell? Nb1, Mk2, Mf3 software? No idea. Did not see it in settings> about device. How do I tell is the next step I guess.
On to check the All Thinks Mk2 thread. Sorry for my noobness.
New Song said:
Been reading the safe strap thread. 89 pages! Stumped on the first one. ENCRYPTED? Not sure. How do I tell? Nb1, Mk2, Mf3 software? No idea. Did not see it in settings> about device. How do I tell is the next step I guess.
On to check the All Thinks Mk2 thread. Sorry for my noobness.
Click to expand...
Click to collapse
Get a terminal emulator on your phone. In it type:
su
getprop ro.bootloader
What does it say? Look at the last three characters
Edit, in about devices what is your baseband, last three characters?
Sent from my Nexus 5 using XDA Free mobile app
Sorry, I thought you NC1 now?
jd will get you sorted, he is more hands on with safestrap than i am
but, the gist of it is going to All Thinks ATT, MK2 and to post 5
but read all you can in both threads--:good:
Nc1. So this is the SafeStrap file: JFLTE-3.72-kk-B01.apk. How a bow the encryption determination? Sound like a bootloader if it is encrypted.
New Song said:
Nc1. So this is the SafeStrap file: JFLTE-3.72-kk-B01.apk. How a bow the encryption determination? Sound like a bootloader if it is encrypted.
Click to expand...
Click to collapse
Did you get nb1 from your baseband? Is your device encrypted? That's different than than the bootloader. Your bootloader is definitely locked. But you can root by updating to nc1 and using towelroot and then safestrap.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Did you get nb1 from your baseband? Is your device encrypted? That's different than than the bootloader. Your bootloader is definitely locked. But you can root by updating to nc1 and using towelroot and then safestrap.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
NC 1
I am rooted. SS installed. ROM DL'ed ready to go. Creating ROM slot. Or trying t seems stuck. I know it takes about 5 minutes. But it's been about 15-20
sorry for the pic quality. No zoom on this tab 4. It's next.
New Song said:
NC 1
I am rooted. SS installed. ROM DL'ed ready to go. Creating ROM slot. Or trying t seems stuck. I know it takes about 5 minutes. But it's been about 15-20
sorry for the pic quality. No zoom on this tab 4. It's next.
Click to expand...
Click to collapse
You have to use the stock slot, not a secondary slot
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You have to use the stock slot, not a secondary slot
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Aaaaand. S'S stopped working. Uninstalled, reinstalled and the same. Technology fails me.
New Song said:
Aaaaand. S'S stopped working. Uninstalled, reinstalled and the same. Technology fails me.
Click to expand...
Click to collapse
What are you trying to flash? PAC isn't going to work, it's cm based. You can only flash touch wiz based roms
Sent from my Nexus 5 using XDA Free mobile app
Anything else. I have Gravitron zip ready to go. But I cannot even get S'S to open now. "SafeStrap has stopped working". Even after attempted reinstalls. If there was someone here local I could just delegate this to, I would.
New Song said:
Anything else. I have Gravitron zip ready to go. But I cannot even get S'S to open now. "SafeStrap has stopped working". Even after attempted reinstalls. If there was someone here local I could just delegate this to, I would.
Click to expand...
Click to collapse
You probably have to use Odin to re-flash nb1 and start over
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You probably have to use Odin to re-flash nb1 and start over
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
That may be. Got safestrap to start working by using se linu mode changer. Still stuck at updating partition details. Gonna start a thread on that I think. Maybe one on the search functions too.
New Song said:
That may be. Got safestrap to start working by using se linu mode changer. Still stuck at updating partition details. Gonna start a thread on that I think. Maybe one on the search functions too.
Click to expand...
Click to collapse
Just as an FYI, I've had very good results with Golden Eye installed via SafeStrap. No problems with it, whatsoever, in my experience. That being said, I'm tired of being restricted to touchwiz ROMs so I've bought a T-Mobile S4 (unlocked SIM/Bootloader) and will be selling my ATT one soon.
Marc
Frankenscript said:
Just as an FYI, I've had very good results with Golden Eye installed via SafeStrap. No problems with it, whatsoever, in my experience. That being said, I'm tired of being restricted to touchwiz ROMs so I've bought a T-Mobile S4 (unlocked SIM/Bootloader) and will be selling my ATT one soon.
Marc
Click to expand...
Click to collapse
Starting to feel the same way. Flashing this sgh-i337 is turning out to be quite an infuriating ordeal. So much conflicting info. Allllll these ROMs available for S4, it seems. But they don't work because this version isn't compatible. And the Tw ones I've tried ALL DAY are not working either. Granted, I was not using SS correctly initially, but now that they are successfully loading in the stock slot are not working. Graviton never boots, stays on the ouroboros snake screen. Imperium has no data or wifi etc (i9505 rom? I tried it as it said it was verified working 9th i337. Nope. Figured it was a problem when it said i9505 on my model). Goldeneye, actually can connect, wifi etc. But when I change settings in Wanam, it does not take them (after reboot). Had all the other connectivity issues until I flashed a patch. Also, I was pretty happy to see than I could activate hotspot. But my device was nowhere to be found by other devices. Modules, kernals, patches, oh my... out of all the tutorials for S4's on the wide wide world of internets, nothing seems to fly. This must be the red headed bastard child of Android.
I know it is all user error, but can nothing be simple?
Just want a simple rom and hotspot. That looks awesome. Hrm.
About to try this GE download. GE-XXUGNG4-37.zip. I tried the later NG-8-38 version last time. And yes, I did the ST update at&t module update previously.
Great googley moogley! I think he's finally got it, folks! Ooooh. Niiice. So smooth. Roomy!
This hacking biz ain't for the faint of heart. Thanks guys!!! MUCH APPRECIAT3D! :good:
Paraphrasing, I think, Tom Hanks
"It's suppose to hard, the hard is what makes it great. If it wasn't hard, everyone would do it."
:good:
rugmankc said:
Paraphrasing, I think, Tom Hanks
"It's suppose to hard, the hard is what makes it great. If it wasn't hard, everyone would do it."
:good:
Click to expand...
Click to collapse
Avoid the clap.... Jimmy Dugan.
Hey that's good advice kid....

4.4.4 OTA update with root

Heya. I have a rooted verizon note 3. I see i can get the 4.4.4 ota update. So i uninstalled root via SuperSU. I get an error trying to do the ota update. Is there a way to install this update without having to use odin and flashing stock? I dont want to lose all my appz settings etc. Any help appreciated. Thanks.
Sent from my SM-N900V using XDA Free mobile app
Probably not a good idea to take the update. I'd wait until our trusty devs get ahold of the OTA and do their magic.
Yah, but i get pretty poor 4g for some reason and this update might (is suppose to) fix it. I read a lot of people have unrooted with superSU and installed the OTA update fine but for me it isnt working. Even though i dont have root.
Sent from my SM-N900V using XDA Free mobile app
lackdog said:
Yah, but i get pretty poor 4g for some reason and this update might (is suppose to) fix it. I read a lot of people have unrooted with superSU and installed the OTA update fine but for me it isnt working. Even though i dont have root.
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
Just install the nk1 modem. That is all you need if you are trying to get better reception.
https://www.androidfilehost.com/?fid=95897840722641747
Flash with Odin 3.09.
lackdog said:
Heya. I have a rooted verizon note 3. I see i can get the 4.4.4 ota update. So i uninstalled root via SuperSU. I get an error trying to do the ota update. Is there a way to install this update without having to use odin and flashing stock? I dont want to lose all my appz settings etc. Any help appreciated. Thanks.
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
That might just of been the best error ever, especially if you use root a lot. No way to go back and no known, released root at the moment for that version. Like above me has said, try flashing the NK1 modem using Odin and see if that improves your signal any.
Well, i just have been using the stock rom, rooted with safestrap. Id like to update to 4.4.4 just to have the latest OTA with whatever various fixes it might have. Before i did the update i uninstalled anything from wanam exposed framework wise. Then i did the "remove root" from superSU. I still have the unlocked lock on the note 3 splash screen after reboot and the OTA fails....says error at install screen. I have read other people have done what i have done and the update worked. What im asking is am i overlooking something? Is it really even possible without using odin and reverting to stock even though i have read people have had sucess????
Sent from my SM-N900V using XDA Free mobile app
lackdog said:
Well, i just have been using the stock rom, rooted with safestrap. Id like to update to 4.4.4 just to have the latest OTA with whatever various fixes it might have. Before i did the update i uninstalled anything from wanam exposed framework wise. Then i did the "remove root" from superSU. I still have the unlocked lock on the note 3 splash screen after reboot and the OTA fails....says error at install screen. I have read other people have done what i have done and the update worked. What im asking is am i overlooking something? Is it really even possible without using odin and reverting to stock even though i have read people have had sucess????
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
If you want the benefits "fixes" of the latest, would be be smart to Odin stock so you are clean when you take the OTA.
lackdog said:
Well, i just have been using the stock rom, rooted with safestrap. Id like to update to 4.4.4 just to have the latest OTA with whatever various fixes it might have. Before i did the update i uninstalled anything from wanam exposed framework wise. Then i did the "remove root" from superSU. I still have the unlocked lock on the note 3 splash screen after reboot and the OTA fails....says error at install screen. I have read other people have done what i have done and the update worked. What im asking is am i overlooking something? Is it really even possible without using odin and reverting to stock even though i have read people have had sucess????
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
You do realize...that if you take the OTA...you WILL lose root. At this point in time...there is no known way to root 4.4.4 and the latest OTA.
Sent from my Note 3 via Tapatalk
how to track 4.4.4 rooting progress?
donc113 said:
You do realize...that if you take the OTA...you WILL lose root. At this point in time...there is no known way to root 4.4.4 and the latest OTA.
Sent from my Note 3 via Tapatalk
Click to expand...
Click to collapse
I too have read ambiguous posts of people who have used the 4.4.4 OTA on a towelroot'ed Verizon Note 3s. I've been skeptical that this would work and keep root so thanks for clarifying.
I have a question though. Where should I look to keep track of the latest news about a root technique for a Verizon Note 3? Also, is there a place to contribute to a bounty for someone who can figure this out?
I ask because If you google "samsung note 3 Verizon 4.4.4 towelroot" there are tons of hits, but most of them are from eons ago and while I root my phone, I am not a developer, and so don't know the lay of the land. In the past I've just searched for "root verizon samsung note 3" and crawled through the resulting mound of irrelevant material until eventually I found the answer. Or is the answer simply that every few days I search again to see if anything new pops up?
I realize this is a totally newbie question, but I'm a long-time newbie: I've been rooting my phones for years but I don't have a lot of phones and updates only come out every so often so I never really move up the learning curve of how to do this quickly and easily. I suspect others have the same problem. Any advice would be greatly appreciated!
lackdog said:
Yah, but i get pretty poor 4g for some reason and this update might (is suppose to) fix it. I read a lot of people have unrooted with superSU and installed the OTA update fine but for me it isnt working. Even though i dont have root.
My phone messed up earlier this week and I had to use repair assistant and when I did it updated me to NK1 KitKat 4.4.4 and I lost root and can not get it back plus the reception issue is still terrible.
Click to expand...
Click to collapse
Marlon1691 said:
I too have read ambiguous posts of people who have used the 4.4.4 OTA on a towelroot'ed Verizon Note 3s. I've been skeptical that this would work and keep root so thanks for clarifying.
I have a question though. Where should I look to keep track of the latest news about a root technique for a Verizon Note 3? Also, is there a place to contribute to a bounty for someone who can figure this out?
I ask because If you google "samsung note 3 Verizon 4.4.4 towelroot" there are tons of hits, but most of them are from eons ago and while I root my phone, I am not a developer, and so don't know the lay of the land. In the past I've just searched for "root verizon samsung note 3" and crawled through the resulting mound of irrelevant material until eventually I found the answer. Or is the answer simply that every few days I search again to see if anything new pops up?
I realize this is a totally newbie question, but I'm a long-time newbie: I've been rooting my phones for years but I don't have a lot of phones and updates only come out every so often so I never really move up the learning curve of how to do this quickly and easily. I suspect others have the same problem. Any advice would be greatly appreciated!
Click to expand...
Click to collapse
It likely is possible to update and keep root. But if after updating you screw up a mod, etc. and need to get back to stock you will lose root permanently.
flashing modem
leroybrute said:
Just install the nk1 modem. That is all you need if you are trying to get better reception.
https://www.androidfilehost.com/?fid=95897840722641747
Flash with Odin 3.09.
Click to expand...
Click to collapse
Hello I see flashing with odin 3.09, I think I have 3.29- does it matter and I am on biggins rom as well. You dont have to unroot or anything?
Thanls,
TJ
tjmethod said:
Hello I see flashing with odin 3.09, I think I have 3.29- does it matter and I am on biggins rom as well. You dont have to unroot or anything?
Thanls,
TJ
Click to expand...
Click to collapse
There is no Odin 3.29 out. Just Google Odin 3.09 and download to your desktop if you don't
already have it. Then flash the modem to your phone. Don't unroot.
Odin 3.09
leroybrute said:
There is no Odin 3.29 out. Just Google Odin 3.09 and download to your desktop if you don't
already have it. Then flash the modem to your phone. Don't unroot.
Click to expand...
Click to collapse
Hi I did have the 3.09, plugged in as media & media 3.0 but it didnt work- any ideas?... I think I have plenty of space. Attached is is the screen I get on Odin.
Thanks,
TJ
tjmethod said:
Hi I did have the 3.09, plugged in as media & media 3.0 but it didnt work- any ideas?... I think I have plenty of space. Attached is is the screen I get on Odin.
Thanks,
TJ
Click to expand...
Click to collapse
You need to put your phone in download mode before plugging into pc. Make sure debugging is checked in developer settings.
Thanks…
I forgot the download mode and to check the debug- always in a rush…
Ill check it when I get in- thanks again
tjmethod said:
I forgot the download mode and to check the debug- always in a rush…
Ill check it when I get in- thanks again
Click to expand...
Click to collapse
No, I thank you... Ha
GoNavyMike said:
lackdog said:
Yah, but i get pretty poor 4g for some reason and this update might (is suppose to) fix it. I read a lot of people have unrooted with superSU and installed the OTA update fine but for me it isnt working. Even though i dont have root.
My phone messed up earlier this week and I had to use repair assistant and when I did it updated me to NK1 KitKat 4.4.4 and I lost root and can not get it back plus the reception issue is still terrible.
Click to expand...
Click to collapse
Verizon forced me to upgrade before they would troubleshoot my phone.
I was not able to do it OTA, but using the Verizon upgrade tool works.
Now I lost root, & I gained a whole bunch of bloatware. Very frustrating
Click to expand...
Click to collapse
Brainfire2 said:
GoNavyMike said:
Verizon forced me to upgrade before they would troubleshoot my phone.
I was not able to do it OTA, but using the Verizon upgrade tool works.
Now I lost root, & I gained a whole bunch of bloatware. Very frustrating
Click to expand...
Click to collapse
That is why you should always tell them you are on the latest firmware
Click to expand...
Click to collapse
I read about 4.4.4 and didn't like what they took away from 4.4.2. I won't go to it. If I were you I'd 'towelroot'- (get the simple steps on xda), and 'beanstown 106' has all the firmwares for these phones, put the nc4 on w/ 4.4.2, then install biggins rom v7, then upgrade via dirty flash with 8.0 then immediately w/ 8.3- fast touch response and after about 3-4 days, you'lI be getting twice the battery life… I jumped up to the new v9 but they dont have the theme for it yet. I miss the Kromex blue on black…

Categories

Resources