Related
Hey guys,
I currently recently installed a custom ROM from this website and for some reason now when I plug in my USB into my PC it comes up not being detected so when I put my phone as hard drive so I want to transfer music, it doesn't detect it. Can anybody help me if this is ROM problem or just my USB?
Hey,
Okay I disabled USB debugging didn't know it was on, still doesn't work says windows cannot find USB device not reconginzed when I connect the USB. For the Reinstalling usb driver I do not know how to this ~?
i have the same problem.. turn "fast boot" off and restart the phone.. this always works for me.. hope this helps
Hey, I turned fastboot off. Doesn't work. I ordered new usb cable.. hopefully this works and it was just a fault with the cable!
Sent from my Desire HD using XDA App
Usually this is a problem with the cable. Simple, cheap to fix. Keep your old cable around for charging though (nice to have a spare)
Is this problem with the USB still active?
If so try a different PC just in order to eliminate WinOS issues.
If not close.
Hi,
I have the same problem at some months ago. I tried the cable and pfone on another PC, and it works fine. So, I recommend to try it on another PC and reinstall your Windows.
brgs,
Herold
Had the same propblem! Turns out it was the usb cable, it charged fine with the cable but data transfer didnt work.
i also had the same problem since last week and still cant resolve till now...i try all the option that u gave(change cable/pc,turn off fastboot)....i even sent my phone to shop and they still cant detect.they said maybe the usb port is damage or some software that may block my usb port?is it true? anyone can help?????
necrs said:
i also had the same problem since last week and still cant resolve till now...i try all the option that u gave(change cable/pc,turn off fastboot)....i even sent my phone to shop and they still cant detect.they said maybe the usb port is damage or some software that may block my usb port?is it true? anyone can help?????
Click to expand...
Click to collapse
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Grant Barker said:
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Click to expand...
Click to collapse
before this is ok.just last week i remember that i pull the usb cable from the phone quite hard.but i don think that the usb too sensitive that will break by that.still can charging... but not detected in pc
I had similar problem and it was hardware, I sent it back to Vodafone and they sent me a replacement!
I am running CM7 now its awesome.
Andy
USB BRICK in my INSPIRE 4G ( DESIRE HD)
Hi, all
I got a new inspire 4g last week.( equivalent to desire hd ). It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not recognize the phone as device. I have tried all the suggestion on xda but no luck.
As fastboot is also not detected by PC I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
Grant Barker said:
What happened last week? Is that when you got the phone? Or installed a different rom? etc.
Click to expand...
Click to collapse
musarraf172 said:
Hi, all
I got a new inspire 4g last week.( equivalent to desire hd ). It was working fine. But now it does not detect the USB connection. It only charges when I connect to pc. No other issues. I have also noticed that during fast boot mode also pc does not recognize the phone as device. I have tried all the suggestion on xda but no luck.
As fastboot is also not detected by PC I could not format mtd0 and reconfigure it.
Can anybody have any other idea? If I change the main board how much cost will incur ??
Thanks all.
Click to expand...
Click to collapse
First of all.. you have HTC Sync installed right?
Happened to me initially as well.. although for me changing the cable and/or changing the USB port on the PC solved the issue. Have you tried these?
Also sometimes killing all apps on the device before connecting helped.
You can try accessing your device through ADB to see if its being detected.
And I really dont think you'll need to change the main board..
USB brick on my Inspire 4G
Thanks for your reply. When I go the phone ADB and Fastboot were working
well. There was no driver issue. Now even PC also does not detect the phone or any new hardware when I connect it to pc. I had working fastboot on both win7 and Linux (ubuntu) pc. Now in both OS the phone is not detectable. Windows device manager does not see any new hardware when I connect my inspire . dmesg also does not show my hardware when I connect my inspire to linux pc.
Please help or suggest me to investigate further. I know how to install and work with adb and fastboot as well as Clockwork recovery ( also ext recovery). Some people suggested to flash a new radio. I can flash the new radio via sdcard. But how safe is it ? My phone is S-off and made unbranded. Will flashing a new radio make my phone locked AT&T again? ????
Thanks a lot
if4ct0r said:
First of all.. you have HTC Sync installed right?
Happened to me initially as well.. although for me changing the cable and/or changing the USB port on the PC solved the issue. Have you tried these?
Also sometimes killing all apps on the device before connecting helped.
You can try accessing your device through ADB to see if its being detected.
And I really dont think you'll need to change the main board..
Click to expand...
Click to collapse
As far as I know.. USB problem has no relation whatsoever to Radio. Radio is only concerned with the signal stuff. Flashing it isn't that risky if you follow the instructions... There's a thread in the development section about Radio's which explains it pretty nicely.
As for the USB problem, are you using a Custom ROM? Some ROMs like LeeDroid have USB detection problem which can be solved simply by flashing a different kernel like LordMod's.
What I meant by "Accessing through ADB" was if commands like "adb remount" or any adb command as such are working when your phone is connected to the PC? Or is it showing "error: device not found"?
Hi
I Have Samsung Galaxy S.
I Have Installed Paranoid Custom ROM On My Device Now I Need To Flush The Original ROM
But I have Problem : When i connect my phone to pc the phone doesn't show any thing any connection massage and even if i enter the phone in downloading mode the pc and the phone doesn't show show any thing
Please I Need help i can't flash any stock rom please help:crying::crying::crying::crying:
Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)
http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2
I forgot to post links
Here will you find Stock Firmwares
http://cur.lv/2j5o
Flash Guide
http://cur.lv/2j5p
Drivers
http://cur.lv/2j5q
Flashprograms
http://cur.lv/2j5r
Service Manuals
http://cur.lv/2j5s
diklooc said:
Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)
Click to expand...
Click to collapse
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .
Kurre said:
http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.
Syrian Eagle said:
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.
Click to expand...
Click to collapse
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Syrian Eagle said:
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .
Click to expand...
Click to collapse
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.
Lexrsk said:
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.
Click to expand...
Click to collapse
Ok How Can I Install the ICS/JB Drivers into my phone :crying::crying::crying::crying:
xsenman said:
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Click to expand...
Click to collapse
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected
Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2
Syrian Eagle said:
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected
Click to expand...
Click to collapse
Every possible reason and solutions that I am aware of, for them are mentioned on that link , you have to try and test each one out, including various Drivers, for you to test...
BUT you keep saying there was no Sign of connection, which means the PC does not say anything (like unknown USB Device) or make a sound and your USB icon does not appear on the phone...am I correct???
That simply means there is NO link, which means, its either your USB cable or USB Port is damaged
alexovy said:
Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Sorry nothing get petter still the problem
Hello.
I recently installed the 4.3 ota update. I knew I would have to reroot. After the update I have tried everything I can think of to flash a new recovery or bootloader or anything. All without success. Fastboot simply says "Sending...", the phone says "downloading..." and that's the end of it. They would both sit in that state forever if I let them.
I know I'm not alone on this issue. I have searched and searched without finding a solution. Does anyone know of one?
Thanks.
pfederighi said:
Hello.
I recently installed the 4.3 ota update. I knew I would have to reroot. After the update I have tried everything I can think of to flash a new recovery or bootloader or anything. All without success. Fastboot simply says "Sending...", the phone says "downloading..." and that's the end of it. They would both sit in that state forever if I let them.
I know I'm not alone on this issue. I have searched and searched without finding a solution. Does anyone know of one?
Thanks.
Click to expand...
Click to collapse
1. Usb debugging enabled and bootloader unlocked?
2. Correct drivers installed, try these usb naked drivers for instance https://www.google.nl/url?sa=t&rct=...=RUlfH35SAJki_DdLfo8MeA&bvm=bv.51773540,d.Yms.
3. Used the original usb cable or tried another usb port?
4. If you type fastboot devices in fastboot mode do you see a serialnumber? The same for adb devices in adb mode?
gee2012 said:
1. Usb debugging enabled and bootloader unlocked?
2. Correct drivers installed, try these usb naked drivers for instance https://www.google.nl/url?sa=t&rct=...=RUlfH35SAJki_DdLfo8MeA&bvm=bv.51773540,d.Yms.
3. Used the original usb cable or tried another usb port?
4. If you type fastboot devices in fastboot mode do you see a serialnumber? The same for adb devices in adb mode?
Click to expand...
Click to collapse
USB debugging is enabled.
I've tried the original USB cable and others. I've tried different USB ports.
adb works fine. Fastboot recognizes my phone and prints a serial number. Fastboot even works for locking/unlocking the boot loader.
There are no "drivers" in the Linux world. Should I find someone who has a Windows system and ask to use their computer?
Thanks.
pfederighi said:
USB debugging is enabled.
I've tried the original USB cable and others. I've tried different USB ports.
adb works fine. Fastboot recognizes my phone and prints a serial number. Fastboot even works for locking/unlocking the boot loader.
There are no "drivers" in the Linux world. Should I find someone who has a Windows system and ask to use their computer?
Thanks.
Click to expand...
Click to collapse
Yes, you may try that. I`am talking about a windows pc and never had an issue. I don`t have xperience with linux computers.Good luck bro
Solved
gee2012 said:
Yes, you may try that. I`am talking about a windows pc and never had an issue. I don`t have xperience with linux computers.Good luck bro
Click to expand...
Click to collapse
So. I solved the problem. I now feel like an idiot.
I plugged my phone into a Windows system and a nice notice popped up saying that my device could run faster if it was plugged into a USB 2.0 port. Then it dawned on me that only a few of the ports on my computer are 2.0 and that I had tried one of them previously but with an extension cable (because it's in the back and hard to reach). I unplugged the extension cable and plugged the USB cable directly into the port and all was well.
I hope that others who have had this issue find this useful.
Thank you for your help.
I tried a ROM, and i fail, i can't turn on my phone (s5360), i must back my phone to STOCK ROM with Odin, but USB Device Not Recognized, i installed driver, help me
follow the instructions on my thread
http://forum.xda-developers.com/showthread.php?t=2568853
if you have installed the driver correctly using rear usb ports if on a pc and set your phone to download mode correctly there is no reason why odin will not display com then a number in a coloured box under com:id which shows odin is connected and you have android adb device displayed in device manager
thanks your help but it not work
thanks your help but it not work, :crying: i tried kies, it also not work
gemnett said:
thanks your help but it not work, :crying: i tried kies, it also not work
Click to expand...
Click to collapse
you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed
if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work
unless you have a faulty usb port/cable it will be due to user error
gemnett said:
thanks your help but it not work, :crying: i tried kies, it also not work
Click to expand...
Click to collapse
Are you boot into download mode already? If not , odin will not recognize your phone anyway
install samsung usb driver first n then connect your phone with download mode by usb
Note:make sure that usb driver is install properly before connect ur phone
.
marcussmith2626 said:
you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed
if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work
unless you have a faulty usb port/cable it will be due to user error
Click to expand...
Click to collapse
i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up
!!
GalKill said:
Are you boot into download mode already? If not , odin will not recognize your phone anyway
Click to expand...
Click to collapse
of course
@@
before that, i installed ROM cm7.2 with Kernel [email protected]#2. but it fail and can't boot. recovery also no
gemnett said:
i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up
Click to expand...
Click to collapse
did you run the usb driver setup in compatibility mode?
right click the setup file
click properties
click compatibility tab
tick box to run in compatibility
select windows xp (service pack 2 will do)
apply
then run the setup
im using windows 8.1 and no problems with me
marcussmith2626 said:
did you run the usb driver setup in compatibility mode?
right click the setup file
click properties
click compatibility tab
tick box to run in compatibility
select windows xp (service pack 2 will do)
apply
then run the setup
im using windows 8.1 and no problems with me
Click to expand...
Click to collapse
i did, pack 2..but still USB Device Not Recognized, maybe my phone die. hehe. but thank you....
Ah, this is my problem: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)" :cyclops:
gemnett said:
i did, pack 2..but still USB Device Not Recognized, maybe my phone die. hehe. but thank you....
Ah, this is my problem: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)" :cyclops:
Click to expand...
Click to collapse
right click the device
click uninstall
restart the pc
then put phone into download mode
connect usb
push vol up on phone to start connection
drivers should then install
Try to use your cable connected from your pc and your phone again. If the same problem happened, try to connect your phone using that cable to another pc. BUT if that phone is not recognized, I think the problem is in the cable. Try to buy another one, and if same thing happened, the problem is in the usb port of your phone.
DiwatangTboom said:
Try to use your cable connected from your pc and your phone again. If the same problem happened, try to connect your phone using that cable to another pc. BUT if that phone is not recognized, I think the problem is in the cable. Try to buy another one, and if same thing happened, the problem is in the usb port of your phone.
Click to expand...
Click to collapse
I think so.. the problem is in the usb port of my phone... so, what i have to do ? replace?
gemnett said:
I think so.. the problem is in the usb port of my phone... so, what i have to do ? replace?
Click to expand...
Click to collapse
Yep.
I've flashed my i9505 many times. I can't remember exactly what I've done, but now the situation is very weird.
1. I can go into Download mode. But Odin doesn't recognise it. Kies doesn't recognise it either. The error message on the bottom right corner of the screen says "USB device not recognized. Your usb device has malfunctioned." I've tried re-install the USB driver, use the original USB cable, even tried it on another PC with no luck. I suspect the very low level USB driver in the phone has corrupted because possibly I flash something wrong in the past.
2. I can go into Recovery mode and flash new ROMs in zip format from there.
3. I can use my phone normally, e.g. make phone call, SMS, WiFi......My computer can recognize my phone as usual when I am in Android.
Any thoughts? Helps are appreciated.
Hello,
Uninstall any previous installed of Samsung USB drivers, clean your Windows registry through CCleaner (not needed but highly suggested) then download and install latest Samsung USB drivers
Now download mode will be recognized on PC
Inviato dal mio GT-I9505
There is an easier way. If you are using windows, go into control panel-> Devices-> Right Click on your phone-> there should be a Driver Details-> Go details I think it is-> Uninstall driver-> Have the box ticked-> Uninstall-> Unplug then replug the cable in and it should work.
Sent from my Nexus 4 using XDA Free mobile app
AntaresOne said:
Hello,
Uninstall any previous installed of Samsung USB drivers, clean your Windows registry through CCleaner (not needed but highly suggested) then download and install latest Samsung USB drivers
Now download mode will be recognized on PC
Inviato dal mio GT-I9505
Click to expand...
Click to collapse
I've tried to re-install the driver. I even tried to connect the phone to another PC where the driver had never been installed before. Nope.... it doesn't work. Actually, I've searched around in Google for long time. The most likely reason is the usb piece of Android code is corrupted. Well, maybe not android, it should be the lower layer of Linux. I previously installed dual boot system follow this link and I screw it up when I tried to upgrade the primary OS:
http://forum.xda-developers.com/showthread.php?t=2447534
procket said:
I've tried to re-install the driver. I even tried to connect the phone to another PC where the driver had never been installed before. Nope.... it doesn't work. Actually, I've searched around in Google for long time. The most likely reason is the usb piece of Android code is corrupted. Well, maybe not android, it should be the lower layer of Linux. I previously installed dual boot system follow this link and I screw it up when I tried to upgrade the primary OS:
http://forum.xda-developers.com/showthread.php?t=2447534
Click to expand...
Click to collapse
You said that in Android USB connection works.
The download mode depends on bootloader, that can't be touched in any way by Android, even you can't touch the bootloader.
It's also write-protected, you can only upgrade it through Odin or through an official OTA update, when flashed you can't downgrade and can't write on its partition if not through JTAG
Inviato dal mio GT-I9505
procket said:
I've flashed my i9505 many times. I can't remember exactly what I've done, but now the situation is very weird.
1. I can go into Download mode. But Odin doesn't recognise it. Kies doesn't recognise it either. The error message on the bottom right corner of the screen says "USB device not recognized. Your usb device has malfunctioned." I've tried re-install the USB driver, use the original USB cable, even tried it on another PC with no luck. I suspect the very low level USB driver in the phone has corrupted because possibly I flash something wrong in the past.
2. I can go into Recovery mode and flash new ROMs in zip format from there.
3. I can use my phone normally, e.g. make phone call, SMS, WiFi......My computer can recognize my phone as usual when I am in Android.
Any thoughts? Helps are appreciated.
Click to expand...
Click to collapse
Hi friend, did you found out how to fix this issue i have the same problem with a I9500 please help
banziitox24 said:
Hi friend, did you found out how to fix this issue i have the same problem with a I9500 please help
Click to expand...
Click to collapse
Sorry mate, I am still stuck in Odin. Since I can flash new ROM via recovery mode and everything else still works, I give up.
procket said:
Sorry mate, I am still stuck in Odin. Since I can flash new ROM via recovery mode and everything else still works, I give up.
Click to expand...
Click to collapse
Dang I have this phone here I can connect it in Odin but in normal mode it doesn't connect and I need it to connect so I can finish the IMEI Repair
change the modes of usb
try *#0808# mtp + adb or others
try *#9090# try all of them
best of luck