Hi I just got my new droid 2 and flashed cm7 2.3.7 onto it. I was sad to find out that the camera doesn't work on this version at all. I was hoping to flash liberty but i don't know if i can just flash it over cm7 or if i have to flash my rom back to stock. Any help or advice would be great!
Thanks,
Albinoman
The lastest version of CM7 has a working camera. It's said not to let the screen lock though with the camera app open or it will FC. Dumb I know, but they are making progess.
Can I just flash the new one over my current one? Do I have to wipe data/cache?
Sent from my DROID2 using xda premium
So ive had my droid R2D2 for about 5 months now, and im just starting to experiment with custom roms. So far ive been trying to use ROM manager, and i used it to install clockwork recovery mod, but it didn't take nearly as long as it seemed to have taken other people to flash. On top of that, no matter what i try whether i try to boot into recovery from ROM manager, or just turn my phone off and then hold the power button with the x hard button on my keyboard, it takes me to a picture of the android guy with an exclamation point, and when i try to hit the search hard button on my keyboard to bring up menu options it doesnt do anything. As for right now im just trying to back up my current stock ROM, but i would eventually like to install a custom rom as well. Any suggestions or highly recommended ROM's either? I was gonna go with cm7 but if there were others someone highly suggested i would like to know about them.
Albinoman said:
Can I just flash the new one over my current one? Do I have to wipe data/cache?
Sent from my DROID2 using xda premium
Click to expand...
Click to collapse
Wipe cache and delvik cache and you can flash over it.
Awesome thanks!
Sent from my DROID2 using xda premium
Hi,
After installing PARANOIDANDROID following this post . The baseband isn't recognised inside PA, so i tried to flash it after the rom but no change. I read a lot about loosing the Partition where the IMEI is stored an got really scare xD After unroot and going back to stock Rom everything is fine. So PA didn't recognise either the partition or the baseband ? Am I doing anything wrong because in no faq was my problem explanded or mentioned.
Sorry for my bad english.
Regards,
Zardorac
nobody ?
You most likely did not do anything wrong, I've been seeing a lot of issues lately with the radio after people flash PA 3.99. I had an issue too last time I installed PA where my radio stopped working completely no matter what the ROM, and I wound up having to use the LG download tool to fix it.
Sent from my Nexus 4 using xda app-developers app
so best option wait for next release or is there any other option.
Regards,
Zardorac
I had the older version of pacman and now trying to flash the new one. I downloaded pac_jfltetmo-nightly-20131018.zip and gapps-jb-20130813-signed.zip. I reboot to recover, restore my phone, flash the ROM then Gapps. I reboot my phone and when i get to the welcome page to setup my phone i click one start and instantly a message pops up saying, "Unfortunately, Setup Wizard has stopped. Blame Tyler." I tried a dozen times and the same thing. Can anyone help please.
Ninjaipod said:
I had the older version of pacman and now trying to flash the new one. I downloaded pac_jfltetmo-nightly-20131018.zip and gapps-jb-20130813-signed.zip. I reboot to recover, restore my phone, flash the ROM then Gapps. I reboot my phone and when i get to the welcome page to setup my phone i click one start and instantly a message pops up saying, "Unfortunately, Setup Wizard has stopped. Blame Tyler." I tried a dozen times and the same thing. Can anyone help please.
Click to expand...
Click to collapse
Same.
Same.
:crying:
Same.
Edit. I tried flashing the ROM by itself then booting the device. Then reboot into recovery and flash the gapps. It worked for me and I have seen others say it is hit or miss. It is worth a try though.
ernieb4768 said:
Same.
Edit. I tried flashing the ROM by itself then booting the device. Then reboot into recovery and flash the gapps. It worked for me and I have seen others say it is hit or miss. It is worth a try though.
Click to expand...
Click to collapse
This doesn't work for me... anyone got a solution? That's annoying..
Ninjaipod said:
I had the older version of pacman and now trying to flash the new one. I downloaded pac_jfltetmo-nightly-20131018.zip and gapps-jb-20130813-signed.zip. I reboot to recover, restore my phone, flash the ROM then Gapps. I reboot my phone and when i get to the welcome page to setup my phone i click one start and instantly a message pops up saying, "Unfortunately, Setup Wizard has stopped. Blame Tyler." I tried a dozen times and the same thing. Can anyone help please.
Click to expand...
Click to collapse
Did you try a clean install?
-wipe data/factory reset
-flash ROM
-flash gapps
-restart
no "restore"
If you say you had an "Older" version, does this mean you were on PAC23 (with android version 4.2.2)?
If you are on a pre-android 4.3 version of PAC, you need to do a full wipe. If you are already on a 4.3 version of PAC and you have "blame tyler" issues, try factory reset, if the problem persists, try a different nightly
Just a little curious...is the Blame Tyler error a specific error or set of errors, or does Tyler get blamed for everything?
Also, can we get Tyler's xda username, so he can get the blame he deserves :laugh:
Ninjaipod said:
I had the older version of pacman and now trying to flash the new one. I downloaded pac_jfltetmo-nightly-20131018.zip and gapps-jb-20130813-signed.zip. I reboot to recover, restore my phone, flash the ROM then Gapps. I reboot my phone and when i get to the welcome page to setup my phone i click one start and instantly a message pops up saying, "Unfortunately, Setup Wizard has stopped. Blame Tyler." I tried a dozen times and the same thing. Can anyone help please.
Click to expand...
Click to collapse
try redownloading the rom zip! and check its md5 code before flashing!!
also do a clean flash! all wipes!
if it doesnt work then even try fix permissions option !
Sent from my C6603 using Tapatalk 4
'Blame Tyler' error is just a generic message displayed when some component crashes/throws an unhandled exception, etc. It's not related to a bad ROM d/l or MD5 code. Telling people to do a full wipe b/c of an undiagnosed error condition doesn't help much. There are far too many little brokens with this ROM that need to be addressed and given more developer support, if this ROM is get more adoption.
Since RC1, nightlies have been dropping for 2 months now - no log of what's fixed or added, unless you are a dev who can wade thru the build change logs and understand what that means. It's ridiculous that we've gone this long since RC1 with a new stable release and documented fixes. Maybe this info is buried somewhere, but it's not in the Spring GS4 forum and the Pac-Man website forum is dead.
These errors are not specific to any one nightly and have been going on for months.
the tyler message is just a replacement of the force close messages. It is meant as a joke as he is one of our devs and we all take turns being blamed for breaking stuff.
If your coming from the old stable and flashing the newest nightile...comming from 4.2.2. to 4.3.1 then a full wipe is required due to the different databases and newer code that isnt compatable with the old version. This should fix your issues.
Also please dont post tylers username as its not nice to go and troll him...
I flashed the rom successfully after a full wipe this weekend. Amazeballs. I blame Tyler for making all my friends jealous of my phone.
I want to keep up with nightlies. The only thing not working for me is the wifi tether. If I have the US snapdragon quad-core variant do I want the pac-jfltetmo.zip?
Sent from my SGH-M919 using xda app-developers app
experienced the same problem and would be greatful for help
vedhed21 said:
I flashed the rom successfully after a full wipe this weekend. Amazeballs. I blame Tyler for making all my friends jealous of my phone.
I want to keep up with nightlies. The only thing not working for me is the wifi tether. If I have the US snapdragon quad-core variant do I want the pac-jfltetmo.zip?
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
Yes, if you have the T-Mobile variant of the S4.
keyboard not working.....
Papa Smurf151 said:
the tyler message is just a replacement of the force close messages. It is meant as a joke as he is one of our devs and we all take turns being blamed for breaking stuff.
If your coming from the old stable and flashing the newest nightile...comming from 4.2.2. to 4.3.1 then a full wipe is required due to the different databases and newer code that isnt compatable with the old version. This should fix your issues.
Also please dont post tylers username as its not nice to go and troll him...
Click to expand...
Click to collapse
i have flashed your pac man rom to my galaxy sl everything went right but its keyborad was not working then i manually flashed another JB keyboard in recovery mode... then it worked ... and i flashed blackgapps(JB 4.2.2) from ENHDROIX developers and it is working quite well...
the only problem i had was keyboard stuff..
so devs should fix that issue...
GUYS THIS IS VERY STRANGE.. The nav bar at the bottom overlaps half of the dock of next launcher which makes the dock completely unusable and ugly.. the same problem persist in 50% of the other apps notably go sms, quick pic, go launchers and many others.. I have tried the milestone releases and a few latest nightlies but its still not fixed..
Its hard to believe there are many discussions of issues about pac rom going on but I didn't find this preety obvious and significant one anywhere..
I have waited like 3 months since I started with pac, updated about 5 nightlies along the way hoping it will be fixed but no luck everytime..
This one is serious.. It has forced me not to use some of my fav apps and use pie navigation at times..
No problem with all the minor bugs but this one is frustrating..
ANY IDEA GUYS??
PS. pac ver 4.3.1 on sg tab p3100 and sg3
Sent from my GT-P3100 using XDA Premium 4 mobile app
Do you know how to enable navigation bar? I saw all the settings in PAC settings>navigation bar but found no option to enable it.
Sent from my GT-P3100 using XDA Premium 4 mobile app
Hey everyone, to make a long story short I'm one of those damned souls that installed chainfire 3d on a non gingerbread device (yes I did not read the description properly but seriously, who is using gingerbread in 2013 and why hasn't the app been taken down from play store?) And pretty much did not find any help anuwhere on how to remove it short of going back to stock or installimg a custom rom.
I did not have backup of nand or anything because I did not plan on installing a custom rom, anyway I imstalled phoenix rom 9.0 and it's okay but I have NO SOUND whatsoever and phone reboots itself mostly when I try to edit something I'm typing with the cursor such as this parragraph.
I could not find a stock rom for my phone, i9500 factory unlocked artic blue, box says it is the model "for the americas" and has the letters UD.
There an ota update for phoenix rom 10.1...would fix my issues? Or will I have to install something else? I would prefer a custom rom that's as close to stock as possible and it has to be 4.3 because I can no longer go back to 4.2.2 it seems because a change of bootloader...
Sent from my GT-I9500 using Tapatalk
Just to clarify, I do know the chainfire3d thing is my fault and no one elses...
Sent from my GT-I9500 using Tapatalk
Umm...hello?
Sent from my GT-I9500 using Tapatalk
Guys,
Recently updated to PA 5.1 and there are a number of little issues for me so if they are not resolved I would definitely like to try Slim again, Slim us the ROM I first installed after rooting.
My question is can I dirty flash from PA 5.1 to the latest version of Slim or what do I have to do? Thanks.
Hi!
Going from one ROM to another one, you should clean flash.
OK thank you for replying, I've had issues before clean flagging though I think that was due to older hardware.
Sent from my A0001 using XDA Free mobile app