i just got OTA update notification for 4.4.3 on my rooted ,stock,custom recovery Nexus 4 running on 4.4.2.
i use SuperSU,Xposed etc.
i have few questions hoping that someone will help me,
1. what happens if i update OTA normally , i lost data?root ? or there is possibility of softbrick while updating.
2. what is the best way of updating rooted phone with stock.
thanks in advance!!:good:
mrYogii said:
i just got OTA update notification for 4.4.3 on my rooted ,stock,custom recovery Nexus 4 running on 4.4.2.
i use SuperSU,Xposed etc.
i have few questions hoping that someone will help me,
1. what happens if i update OTA normally , i lost data?root ? or there is possibility of softbrick while updating.
2. what is the best way of updating rooted phone with stock.
thanks in advance!!:good:
Click to expand...
Click to collapse
Download and Install the OTA, you will loose your ROOT AND RECOVERY but not the data. That is the easiest way.
plz elaborate the process, i am new to it.
and one more question : what if i do OTA normally(over wifi).
with custom recovery and xposed OTA will fail and maybe soft brick.
please read here: http://forum.xda-developers.com/nexus-4/general/info-nexus-4-ota-help-desk-t2145848
carlosmg2 said:
with custom recovery and xposed OTA will fail and maybe soft brick.
please read here: http://forum.xda-developers.com/nexus-4/general/info-nexus-4-ota-help-desk-t2145848
Click to expand...
Click to collapse
thats what i am fearing , plz guide me for updating my rooted stock .
anyone in the same situation? OTA hit on device but not sure to update due to rooted and custom recovery, with Xposed and other modifications, plz help
mrYogii said:
anyone in the same situation? OTA hit on device but not sure to update due to rooted and custom recovery, with Xposed and other modifications, plz help
Click to expand...
Click to collapse
You have two (best I think) solutions:
1) Get back to stock and download OTA... before you do that, download Titanium Backup, backup your apks with it's cache so you won't have to set them up or start games from beggining... to backup messages etc you can use My Backup Pro, for calendar and contacts synchronize your Google account
2) Try to "get back to stock" as near as you can and try OTA... if it fails, it's not difficult to recover from softbrick
parkourz said:
You have two (best I think) solutions:
1) Get back to stock and download OTA... before you do that, download Titanium Backup, backup your apks with it's cache so you won't have to set them up or start games from beggining... to backup messages etc you can use My Backup Pro, for calendar and contacts synchronize your Google account
2) Try to "get back to stock" as near as you can and try OTA... if it fails, it's not difficult to recover from softbrick
Click to expand...
Click to collapse
i think 1 option i will try, what will be the process of
parkourz said:
Get back to stock
Click to expand...
Click to collapse
, if i am running stock but with custom recovery and xposed like modifications .
mrYogii said:
thats what i am fearing , plz guide me for updating my rooted stock .
Click to expand...
Click to collapse
in the link I posted OTA HELP DESK is all well explained.
I was in your same situation (stock + franco kernel+ TRWP recovery + Xposed) and i have just installed the OTA. This is what I did:
1- Uninstall Xposed (from inside the installer)
2- Uninstall Cerberus app (because in some cases it modifies system)
2- Flash stock kernel
3- Flash OTA in recovery
* It failed because Franco kernel modifies /system/lib/hw/power.msm8960.so --> so renamed power.msm8960.so.bak to power.msm8960.so
4- Flash OTA in recovery
5- Flash TRWP recovery
6- rooted
carlosmg2 said:
in the link I posted OTA HELP DESK is all well explained.
I was in your same situation (stock + franco kernel+ TRWP recovery + Xposed) and i have just installed the OTA. This is what I did:
1- Uninstall Xposed (from inside the installer)
2- Uninstall Cerberus app (because in some cases it modifies system)
2- Flash stock kernel
3- Flash OTA in recovery
* It failed because Franco kernel modifies /system/lib/hw/power.msm8960.so --> so renamed power.msm8960.so.bak to power.msm8960.so
4- Flash OTA in recovery
5- Flash TRWP recovery
6- rooted
Click to expand...
Click to collapse
i have stock kernel , i used xposed for ui tweaks and boot animation etc apart from that all other things are stock only, if i uninstall xposed m i good to go for OTA from wifi? or i have to flash it in recovery?if so then plz point me to 4.4.3 update download link.
thanks!
mrYogii said:
i have stock kernel , i used xposed for ui tweaks and boot animation etc apart from that all other things are stock only, if i uninstall xposed m i good to go for OTA from wifi? or i have to flash it in recovery?if so then plz point me to 4.4.3 update download link.
thanks!
Click to expand...
Click to collapse
read THIS http://forum.xda-developers.com/nexus-4/general/info-nexus-4-ota-help-desk-t2145848
I'm not sure, but your situation may need 'Scenario #2' (+ uninstalling Xposed)
can anyone else conform me on this:
i have stock kernel , i used xposed for ui tweaks and boot animation etc apart from that all other things are stock only.
suggested(http://forum.xda-developers.com/nexus-4/general/info-nexus-4-ota-help-desk-t2145848) :
Section B: Flashing in a custom recovery
1) Download the OTA.zip and copy to your phone.
2) Boot into recovery.
3) Flash the OTA just like you would a ROM.
4) Reboot.
i am not sure that xpose modifications come in this condition or not
mrYogii said:
can anyone else conform me on this:
i have stock kernel , i used xposed for ui tweaks and boot animation etc apart from that all other things are stock only.
suggested(http://forum.xda-developers.com/nexus-4/general/info-nexus-4-ota-help-desk-t2145848) :
Section B: Flashing in a custom recovery
1) Download the OTA.zip and copy to your phone.
2) Boot into recovery.
3) Flash the OTA just like you would a ROM.
4) Reboot.
i am not sure that xpose modifications come in this condition or not
Click to expand...
Click to collapse
yeah, you need to uninstall Xposed too (from within the app, not like uninstalling normal apps). Then you can reinstall and have all modules and config untouched.
carlosmg2 said:
yeah, you need to uninstall Xposed too (from within the app, not like uninstalling normal apps). Then you can reinstall and have all modules and config untouched.
Click to expand...
Click to collapse
i tried as you told, while installing OTA from zip i got following error:
/syaystem/priv-app/SystemUI.apk has unexpected contents.
installation aborted.
plz help
stock 4.4.2 nexus 4 SystemUI.apk
anyone has stock 4.4.2 nexus 4 SystemUI.apk? i have to revert back to install 4.4.3 update through recovery.
mrYogii said:
can anyone else conform me on this:
i have stock kernel , i used xposed for ui tweaks and boot animation etc apart from that all other things are stock only.
suggested(http://forum.xda-developers.com/nexus-4/general/info-nexus-4-ota-help-desk-t2145848) :
Section B: Flashing in a custom recovery
1) Download the OTA.zip and copy to your phone.
2) Boot into recovery.
3) Flash the OTA just like you would a ROM.
4) Reboot.
i am not sure that xpose modifications come in this condition or not
Click to expand...
Click to collapse
mrYogii said:
i tried as you told, while installing OTA from zip i got following error:
/syaystem/priv-app/SystemUI.apk has unexpected contents.
installation aborted.
plz help
Click to expand...
Click to collapse
Try this it'll work for you
http://forum.xda-developers.com/showthread.php?p=53176897
Sent from my Nexus 5 using XDA Free mobile app
Related
Can you please help me answer how to install OTA updated with CWM installed. I get this error saying the installation aborted .. it boots into CWM
is there any step by step method to get the new update on nexus 4
Thanks
you need stock rom, no modifications made, and stock kernel for it to work
Download and extract the original 4.2 and fastboot flash system system.img and it'll restore all missing apps.. I had to do it earlier to allow the system to install the update
Sent from my Nexus 4 using xda app-developers app
I reflashed stock recovery but now the update isn't available. Any ideas?
billybennett said:
I reflashed stock recovery but now the update isn't available. Any ideas?
Click to expand...
Click to collapse
update manually.
So I got my update but it keeps failing during install. I'm rooted and every time the update starts it kicks over to CWM recovery and stops with a message something like, "do you want to install this untrusted zip file" I say yes but it still fails. I have even tried to manually install the update through CWM but that fails too. My N7 is rooted but otherwise stock, I have not removed any stock apps or flashed roms or kernels so WTF must I do???
Did you not read the posts above yours? CWM recovery is not stock.
Sent from Arkham
zelendel said:
Did you not read the posts above yours? CWM recovery is not stock.
Sent from Arkham
Click to expand...
Click to collapse
I don't know where, but I saw a few posts about working updates to 4.2.1 with CWM recovery.
However, I'm not getting it to work.
How do I get rid of the recovery without loosing the root?
If you are on Windows I find the Nexus 4 Toolkit to be super easy to use. I flashed a stock recovery so I could get the update. Unfortunately, I forgot I had made changes to the stock weather widget so I can't apply the update anymore because of a missing geniewidget.odex file.
You will need to be fully stock to get the update to take as posted earlier in this thread. This is a well known requirement when doing OTA
Sent from Arkham
4.2.1 update getting installation aborted
Hey, can some please post the stock Nexus 4 v4.2 build.prop file? I can't seem to install the v4.2.1 update without it...
Thanks...
zelendel said:
You will need to be fully stock to get the update to take as posted earlier in this thread. This is a well known requirement when doing OTA
Sent from Arkham
Click to expand...
Click to collapse
Successfully installed OTA here while rooted with CWM recovery, though everything else is stock.
billybennett said:
If you are on Windows I find the Nexus 4 Toolkit to be super easy to use. I flashed a stock recovery so I could get the update. Unfortunately, I forgot I had made changes to the stock weather widget so I can't apply the update anymore because of a missing geniewidget.odex file.
Click to expand...
Click to collapse
Hey,
got an Error over here with stock recovery and root.
However, tengen says he made it with CWM and root - maybe it's because I'm using stuff like Busybox or the Pimp my Rom APK?
EDIT: I think its because of the %-BatteryMod I'm using. I'll try to flash the custom rom.
Greetings
Let this be a warning, the latest update put my phone in a reboot loop. After trying to apply the update clockwordmod would come up on restart, installation would fail, couldn't see why, too fast, the phone would start up and after 15-20 sec it would shutdown to start all over again.
Don't know what update does as I have a french phone and all update messages come in french. I saw that USB on the go was mentioned and some other bug fixes.
TO FIX:
Enter fastbood mode (VOL DOWN+POWER)
From the PC enter:
fastboot erase cache
Can someone more knowledgeable say why the update fails?
Regards
the same issue for me with my french moto g
mihmihovic said:
the same issue for me with my french moto g
Click to expand...
Click to collapse
It Won't work if you have rooted your phone!
robin0800 said:
It Won't work if you have rooted your phone!
Click to expand...
Click to collapse
ok thanks so impossible to install it?
Somebody correct me if I'm wrong, but I was thinking that you need the stock recovery and not CWM or TWRP.
samijam said:
Somebody correct me if I'm wrong, but I was thinking that you need the stock recovery and not CWM or TWRP.
Click to expand...
Click to collapse
Yes you do and no root
I had the same problem. You have to go back to latest stock rom before installing the update, and then rooting again. Worked fine for me.
See this guide for example : http://forum.xda-developers.com/showthread.php?t=2542219
samijam said:
Somebody correct me if I'm wrong, but I was thinking that you need the stock recovery and not CWM or TWRP.
Click to expand...
Click to collapse
Stock RECOVERY, KERNEL and NO changes in /system partition whatsoever (including root.)
With some experience there´s nothing easier than flash stock ROM. Or do it thrice a day if you feel like that
had same pb, i try to flash back to stock recovery 4.4 >> nok
i flash the CWM Advanced Edition and its work, no need to flash stock + unroot, i keep my root with this :laugh:
CWM Advanced Edition Link : http://forum.xda-developers.com/showthread.php?t=2639583
edit : i lost my gravity Box setting, cz update overwritten system file, i think
OTA_ said:
had same pb, i try to flash back to stock recovery 4.4 >> nok
i flash the CWM Advanced Edition and its work, no need to flash stock + unroot, i keep my root with this :laugh:
CWM Advanced Edition Link : http://forum.xda-developers.com/showthread.php?t=2281367
edit : i lost my gravity Box setting, cz update overwritten system file, i think
Click to expand...
Click to collapse
This is the Philz recovery for the Samsung S4, I'd recommend you fix the link before we have people wondering what went wrong
fixxxer667 said:
This is the Philz recovery for the Samsung S4, I'd recommend you fix the link before we have people wondering what went wrong
Click to expand...
Click to collapse
sorry tks, will edit it
OTA_ said:
had same pb, i try to flash back to stock recovery 4.4 >> nok
i flash the CWM Advanced Edition and its work, no need to flash stock + unroot, i keep my root with this :laugh:
CWM Advanced Edition Link : http://forum.xda-developers.com/showthread.php?t=2639583
edit : i lost my gravity Box setting, cz update overwritten system file, i think
Click to expand...
Click to collapse
If i understand it... Have you flashed OTA with Phil CWM without reverting phone to full stock (recovery, unrooted and untouched system apps)?
Elessar76 said:
If i understand it... Have you flashed OTA with Phil CWM without reverting phone to full stock (recovery, unrooted and untouched system apps)?
Click to expand...
Click to collapse
yap
ps : when i update the xposed Framework, & reboot my G, i get back my gravitybox setting
OTA_ said:
yap
ps : when i update the xposed Framework, & reboot my G, i get back my gravitybox setting
Click to expand...
Click to collapse
What variant r u using? I'm waiting for the us gsm update for xt1034 so I can have native otg USB. I already have philz installed so if I can just flash over my rooted stock ROM that would be awesome!
Sent from my XT1034 using Tapatalk
newellj79 said:
What variant r u using? I'm waiting for the us gsm update for xt1034 so I can have native otg USB. I already have philz installed so if I can just flash over my rooted stock ROM that would be awesome!
Sent from my XT1034 using Tapatalk
Click to expand...
Click to collapse
Last version, falcon non gpe
Disclaimer:
This is touchwiz rom.
supersu will fc but it works.
not my work or any leak.
use at own preference.
i will not be responsible.
do not share link anywhere to other sites. pls be this low and leaker anonymous.
no need bootloader.
do not ask for n3 features.
do not make mirrors even if its down.
Downloads:
http://goo.gl/rf0QMQ
Instructions :
full wipe recommended then flash using philz v6.15.4.0 or v6.19.3.0
make update binary in philz option from (x) to () then flash.will solve all errors and boot.
link to philz :http://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7100
P.S.
How to screen record ???
http://howto.cnet.com/8301-11310_39-57610905-285/how-to-record-your-screen-on-android-4.4-kitkat/
How to enable art??
(this will bootloop/stuck on samsung logo for sure 100%)
go to recovery mount /system and /data
then use adb
Code:
adb pull /data/property/persist.sys.dalvik.vm.lib
open the file and replace the "libart.so" with "libdvm.so" (no quotes) and vice versa.
for dalvik use "libdvm.so" ///////////// for art use "libart.so"
Code:
adb push persist.sys.dalvik.vm.lib /data/property/
Reboot
enjoy bootloop.
some files might be missing.
why?? bcoz if anyone can find how to enable art then it will be too beautiful.
Credits :
XDA for all guides and some materials.
Reserved ?
Sent from my GT-N7100 using Tapatalk
Deleted
tryunus said:
Any more informations? TW/CM? Screenshots? That we know what we flash
Click to expand...
Click to collapse
no ss sorry. its tw rom.
Note- Those facing problem with bootloop, flash TWRP 2.6.3.1. You don't even need to select any option like in Philz as stated in OP. Just do a clean install (wipe system, data, dalvik, cache).
i'm hoping someone will post some screenshot :fingers-crossed:
Whatever....
Tnx ravi.
thank you so much ..
update : supersu will fc but it works.. only app needs to be updated i think from chainfire for this leak.
or kernel to be patched for permissive or disabled.
Thank you, @ravijani--it's too tempting an opportunity to miss.
does this have knox or any bootloader in the rom ?
and it is possible to go back to 4.3 if required
cc154 said:
does this have knox or any bootloader in the rom ?
and it is possible to go back to 4.3 if required
Click to expand...
Click to collapse
did i said its tar file?? i said flash with latest recovery.
knox wont be a problem.
cc154 said:
does this have knox or any bootloader in the rom ?
and it is possible to go back to 4.3 if required
Click to expand...
Click to collapse
No,its knox free and without BL
Yes,you can revert to 4.3
I guess there a zillion folks downloading right NOW--speeds are sloooooow.........patience, please.
mannyvinny said:
No,its knox free and without BL
Yes,you can revert to 4.3
Click to expand...
Click to collapse
Thanks for the reply - just wanted to be sure - Thank you
I have a problem , i came from stock 4.3 , i flashed the rom in philz with full wipe twice and still stuck at the samsung logo.
Any suggestions?
romica said:
I have a problem , i came from stock 4.3 , i flashed the rom in philz with full wipe twice and still stuck at the samsung logo.
Any suggestions?
Click to expand...
Click to collapse
flashed properly??
ravijani said:
flashed properly??
Click to expand...
Click to collapse
First time yes the rom flashed properly and stuck at samsung logo , then i flashed the latest philz recovery 6.19.3 and almost at the end of the flashing i had error 7.
I will try again , now i'm flashing via odin the official 4.3 ENA3 and i will try again
Silly question--but, did you make a Nandroid backup before flashing the 4.4.2 ROM?? If so, why not restore?
Hi all,
I have a stock ROM image of Android 4.4 on my nexus 4, Custom kernel and TWRP recovery.
I want to update to latest 4.4.2 and save all my data and customization (I'm using Xposed framework)
To my understanding, I cannot use OTA update due to TWRP, so how can I manually to this? what is the best method?
My intuition says flash "image-occam-kot49h.zip" using TWRP, but the I will lose the custom kernel and maybe root?
Thanks!
yan4321 said:
Hi all,
I have a stock ROM image of Android 4.4 on my nexus 4, Custom kernel and TWRP recovery.
I want to update to latest 4.4.2 and save all my data and customization (I'm using Xposed framework)
To my understanding, I cannot use OTA update due to TWRP, so how can I manually to this? what is the best method?
My intuition says flash "image-occam-kot49h.zip" using TWRP, but the I will lose the custom kernel and maybe root?
Thanks!
Click to expand...
Click to collapse
There are many ways but I would recommend that you flash stock kernel before doing any of these below.
1. Download OTA package from a thread in General Section here (use search tool) and flash it via twrp.
2. Download a flashable 4.4.2 stock rom (or any custom 4.4.2 rom) from a thread in Android Development Section (use search tool) and flash it via twrp. Then download the new .98 baseband (optional, from General Section) and flash it in twrp.
3. Download 4.4.2 factory image (search in google) and flash it via ADB. You don't need to flash the whole package. Just system.img and radio.img should be enough.
Note
1. The one you said image-occam-xxx.zip that is not flashable via twrp. You need to extract the .img files and flash it via ADB.
2. Yes all the above option will make you lose root. Not a big deal, just flash back SuperSu after.
3. The above note (no 2) also applies for kernel. Unless, you use the third option to upgrade.
Good luck to you.
Sent from my Nexus 4 using xda premium
arffrhn said:
There are many ways but I would recommend that you flash stock kernel before doing any of these below.
1. Download OTA package from a thread in General Section here (use search tool) and flash it via twrp.
2. Download a flashable 4.4.2 stock rom (or any custom 4.4.2 rom) from a thread in Android Development Section (use search tool) and flash it via twrp. Then download the new .98 baseband (optional, from General Section) and flash it in twrp.
3. Download 4.4.2 factory image (search in google) and flash it via ADB. You don't need to flash the whole package. Just system.img and radio.img should be enough.
Note
1. The one you said image-occam-xxx.zip that is not flashable via twrp. You need to extract the .img files and flash it via ADB.
2. Yes all the above option will make you lose root. Not a big deal, just flash back SuperSu after.
3. The above note (no 2) also applies for kernel. Unless, you use the third option to upgrade.
Good luck to you.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
I'm getting frustrated
I tried the first option you suggested and it failed.
Then, I flashed stock kernel, stock recovery, uninstalled Xposed framework, and tried to apply OTA (not manually) and it failed
I don't want to install a fresh 4.4.2 because I want to save all my customization, how can I do it?
Please help...
yan4321 said:
I'm getting frustrated
I tried the first option you suggested and it failed.
Then, I flashed stock kernel, stock recovery, uninstalled Xposed framework, and tried to apply OTA (not manually) and it failed
I don't want to install a fresh 4.4.2 because I want to save all my customization, how can I do it?
Please help...
Click to expand...
Click to collapse
You're not going to be able to. The customizations are what are letting you from getting the ota.
Sent from my Nexus 5
jd1639 said:
You're not going to be able to. The customizations are what are letting you from getting the ota.
Sent from my Nexus 5
Click to expand...
Click to collapse
Why is that?
I've uninstalled Xposed framework, and all the customization are now gone (but saved), according to other threads here this is enough to be able to get OTA update. all other customization are not related to ROM features.
yan4321 said:
Why is that?
I've uninstalled Xposed framework, and all the customization are now gone (but saved), according to other threads here this is enough to be able to get OTA update. all other customization are not related to ROM features.
Click to expand...
Click to collapse
To get the ota flash the system and boot images from the factory image with fastboot.
Sent from my Nexus 5
yan4321 said:
Why is that?
I've uninstalled Xposed framework, and all the customization are now gone (but saved), according to other threads here this is enough to be able to get OTA update. all other customization are not related to ROM features.
Click to expand...
Click to collapse
Then just use option 3. Just flash system.img and radio.img (radio is optional though). It will rewrite your system partition. Therefore root and anything you installed as system apps will be lost. But just flash SuperSu, and reinstall and update xposed. Then activate back all your customization.
Sent from my Nexus 4 using xda premium
Thank you!
I've flashed system.img and boot.img and then applied the OTA update and it worked!
I have a que devs i hv unlocked my bootloader installed philz recovery and rooted. My question is that will i b able to recieve OTA updates. If not how to unroot than...... thanx in advance
Sent from my AO5510 using XDA Premium 4 mobile app
bijju123 said:
I have a que devs i hv unlocked my bootloader installed philz recovery and rooted. My question is that will i b able to recieve OTA updates. If not how to unroot than...... thanx in advance
Sent from my AO5510 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
you will get OTA updates.. it doesn't matter if your phone is rooted or not..
The new update just released...
But those who were rooted weren't allowed to install it...
N'ayam Amarsh'e said:
The new update just released...
But those who were rooted weren't allowed to install it...
Click to expand...
Click to collapse
Well then you will be surprised to know that the people with root can update via OTA, it's just that they will loose their root privileges after updating.
The only requirement for the updates is that you need to be on the stock CyanogenMod recovery to take the benefit of the updates also you need to make sure that the apps or zips that you flashed might not have tempered with the core framework of the system as the update checks the signatures before updating and if they don't match installation fails.
As for the OP, make sure you flash the stock rom and that's it. You don't need to unroot in order to get the OTAs. But if have missed it you can always flash the update manually
hkm93 said:
Well then you will be surprised to know that the people with root can update via OTA, it's just that they will loose their root privileges after updating.
The only requirement for the updates is that you need to be on the stock CyanogenMod recovery to take the benefit of the updates also you need to make sure that the apps or zips that you flashed might not have tempered with the core framework of the system as the update checks the signatures before updating and if they don't match installation fails.
As for the OP, make sure you flash the stock rom and that's it. You don't need to unroot in order to get the OTAs. But if have missed it you can always flash the update manually
Click to expand...
Click to collapse
Please guide me to install the update.I have rooted my phone and have installed Philz recovery.How to install stock recovery so that I can install the OTA update?
maddydilip said:
Please guide me to install the update.I have rooted my phone and have installed Philz recovery.How to install stock recovery so that I can install the OTA update?
Click to expand...
Click to collapse
I'd recommend to go and watch this thread on YU forums, it's not mine, but it's the first post that came on how to get the update manually.
But still in short all you need to do is :
1. Download the OTA's .img file from here : https://drive.google.com/file/d/0B5qkmXkPr5WyMy1FUm9rNGdZZ2c/view?usp=sharing
2. Download the stock CyanogenMod Recovery from ere : https://drive.google.com/folderview?id=0BwVitsnY-WxvRVNYcnhRM05vX2c&usp=sharing
3. Download Flashify from app store if u r sure that you r rooted.
4. Open Flashify >> select "Recovery Image" >> select "choose File" >> browse the Recovery .img file that you downloaded and flash it.
5. Open Custom recovery, go to "Update" browse and select your ota update .img file and flash it.
It'll take about a min to flash it and if all goes well, you will have the updated build and the proximity issue fixed !
unrooting
bijju123 said:
I have a que devs i hv unlocked my bootloader installed philz recovery and rooted. My question is that will i b able to recieve OTA updates. If not how to unroot than...... thanx in advance
Sent from my AO5510 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
well i am not sure will work with you or not or work without any harm, i rooted with updated supersu but option in it for uninstalling not workng so i read online thread but it suggesting to reinstall stock rom, i am in cm12
i treid root genius in pc a tiny software which has option to unroot i clicked on that and within second i unrooted , i reboot the super su software was not there, agian reboot mobile working normal then i locked my bootloader .