Hello my favorite HTC HD2 is for me best device what I ever have but yesterday my touch screen stop responding and I don't know why... I try reinstall ROM but still don't work... It is plausible repair in home or i need buy something new??? Any help plz. Btw sorry for my bad English.
Sent from NEXUS 4 like a boss
Hi Mato_xXx, welcome to the forum. It sounds like your digitiser ribbon cable is damaged. To be sure try flashing wm6.5 and see if it is the same. Else, see this thread http://forum.xda-developers.com/showthread.php?t=1566179 for replacement of digitiser, some good helpful people there.
OK try it
Sent from NEXUS 4 like a boss
OK thanx for help but after flashing stock WP is still touch screen broken :crying: . I try open it and do something but for now is broken.
OK... I open it try unplug all cables take out mainboard, then plug all cables back screw it back and when I try put back cover a crack him... now I have destroied back cover and not working screen... What next... :crying:
Related
i accidentally dropped my xda atom,.
the bad thing is that when i check it the display goes with
lines with the different colors,.. huhu
the phone is still acessable,. because i can still receive calls,..
i've tried to flash it with other roms but still no luck,.
what should i do,..
please anyone??
a lot of thanks in advance,.. huhu
the connectors of screen to the main board must have loosened up....
just take it to a good mobile repair shop and get those fixed....or else as the worst case your screen have to be changed........
heey,
before i start please my english is not soo good at al *dutch guy*
i'm, very new here,i done some roms and tweaks but all the easy stuff
i have been here around for some months but never posted anything,but alright everything hass a start
to gett to the point i dropt my phone while peeing and i landed on the screen right away.....
now the phone starts and everything is good,after 2hours....
my screen does respond...but i got a black screen........ i see the backlight is onn and i feel the vibration....of the screen sooo the screen is oke??
i got a screw driver sett....for phones ect ect...but does anyone know? if there's a connector loose or something?
Thnx for reading already it must have been hard......to understand....
you all,can reply here or on [email protected]
thnx in advance,take care folks!
If you have insurance cover then claim it if possible
Your LCD seems to be having problems. LCD and digitizer come as one unit. There has been not much success seperating them without damage..
So you need to buy LCD+Digitiser set. Search E-bay.
You can read these threads for more info on this topic and also use search.
You can find the service manual here
Lastly if you are uncomfortable opening it your self you can search for repair stores on the net.
Hope it helps a little.
eschwin said:
heey,
before i start please my english is not soo good at al *dutch guy*
i'm, very new here,i done some roms and tweaks but all the easy stuff
i have been here around for some months but never posted anything,but alright everything hass a start
to gett to the point i dropt my phone while peeing and i landed on the screen right away.....
now the phone starts and everything is good,after 2hours....
my screen does respond...but i got a black screen........ i see the backlight is onn and i feel the vibration....of the screen sooo the screen is oke??
i got a screw driver sett....for phones ect ect...but does anyone know? if there's a connector loose or something?
Thnx for reading already it must have been hard......to understand....
you all,can reply here or on [email protected]
thnx in advance,take care folks!
Click to expand...
Click to collapse
hi.guys~~me too~~~my HD screen was black~~but the phone starts and everythings is good.my screen does respond...
i flash other rom,the screen was black
as they said, i would say buy an lcd+digitizer set of ebay, they are of reasonable price.
next time leave your phone on the table before heading to the bathroom
thnx,alright sooo i have to contact the insurance people.... thnx already
the lcd digitizer thing is tooo much work for me...but alright,i got my old phone back and try to work with that one....
thnx for giving me the posible things to do
take care you all!
alright a other messy thing....
i got my pim backup file...and the only thing i wanted is my contact list..... but i got a other phone for replacement ''Se k810i''
and i wanted to read out my contact list in any kinda way...from that ''pim backup file'' can i extract it or something? on my pc? to read out my contacts.....
sorry for my badd english...thnx already...
*i did some research but cannot find it....*
join the club mate,
http://forum.xda-developers.com/showthread.php?t=513614
see my signature
Hi all,
First of all let me appologise for my bad english.
I have a G1 and yesterday after i called someone the touchscreen stopped working.
Now I tried a few things to test if it was really not working
- flashed a new rom to see if it was the rom
- used a backup when it was working.
- Reset the phone.
Now I opened the G1 and noticed the Flex Cable has a little tear in it.
At first i thought that was the problem, but i dont think that cable breaks that easy if you make a phone call.
(I reassembled the phone and the lcd screen is working and all but no touchscreen)
So i was wondering, is it common of the touch screen just stops working?
And is there a way to test the touchscreen?
Many thanks,
MacWell
I'm sorry if i posted this in the wrong place or if this already has been answerd, but i couldn't find it with the search button.
not sure if this helps but if you have a screen protector, than remove it.. try cleaning the seams... not sure if it will help but i read a few posts saying it helped others...
ldrifta said:
not sure if this helps but if you have a screen protector, than remove it.. try cleaning the seams... not sure if it will help but i read a few posts saying it helped others...
Click to expand...
Click to collapse
Hi,
Thanks for the reply.
I do not use a screen protector.
I ordered a new G1 flex cable and I hope this will fix the problem.
However if it doesn't fix the problem I think i'll buy a new touchscreen for the G1.
But if anyone has an idea please tell me
Hi i have a htc hd2 with gingerbread, my brother replaced my screen and it work fine the first time with the only problem that you see light in the corners because it didnt fit properly to the frame,
2 he tried to fix it so he used some glue when i turned on it freezed when booting and the color white was showing pink
3 he took it apart again to put it like the first time and it work but now the speaker stoped working so i used it like that for 3 weeks
4 then i told him if he could check the speaker so he took it apart again with no luck and now it freezes again when booting we have tried to find the problem with no luck
do someone have any clue for what is causing the problem please help me
another thing since replacing the screen the first time you turn on the phone has to be with the ac cable because it wont do nothing with the on button after that the button works fine
hope someone can help me and sorry for my poor english
it seems like you might have a loose cable connection somewhere, like the loose flex ribbon or broken sockets. Your only bet is to disassemble your HD2 and assemble it,but this time around, you might want to do it according to proven methods and go step by step. Refer to the links below to help you:
http://www.ifixit.com/Guide/Repair/Installing-HTC-HD2-PB81120-Screen/5651/2
http://pocketnow.com/hardware-1/official-htc-hd2-disassembly-assembly-training-videos-leaked
if proper disassembly and assembly do not work, then im afraid you have to replace your flex ribbon or get a new screen. it is often hard to troubleshoot what exactly is causing the problem unless you see a visual break in connections. take a really close look at all the connectors that are involved with the screen: the locks, sockets and cables.
do try the above and good luck. hope this helps.
-cheers
Hello, I have a Motorola Defy, that I dropped a few times, so the LCD screen got damaged with blue dots on it, I made a mistake and thought that the problem was on the touch Screen, so I purchased a replacement, installed but, it was damaged, the touch did not respond correctly, I wasn't able to type correctly among other problems.
I got a refund, then ordered a LCD screen replacement, now that I have it here, I install it, and it's broken:crying: I know, bad luck and being a rookie while trying to fix my phone, ok, I put back my old (damaged) LCD screen to use it in the meantime, and the old touch screen, but now, the old touch screen that was supposed to being working fine, it doesn't, it has the same problem as the touch screen that I bought.
Question is: the problem with the touch screen, could be related to the damaged LCD screen? or the motherboard of the phone is damaged? the phone works great, the apps, the games, everything but the touch screen and the LCD screen, but, as I said, I went back to the default touch screen after using the damaged one that I received, and it works worse I don't know what's wrong, please help me out, sorry for the long post
Please post questions in the Q&A section. Moved there.
Put it in the freezer for 1-2 hours
Sent from my MB525 using xda app-developers app
ppero196 said:
Put it in the freezer for 1-2 hours
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
Is this true?
true. fix some minor dead pixel if you put in freezer for one day. but your case... im dont hope much.
Try changing LCD + Capacitive Digitizer. (after trying the freezer trick ofcourse)
Well i will tell my story, which is related to your's as well,
i had a phone with resistive touch screen and it got screwed up, that is it does not respond correctly. So, i took it to the service center and they replaced the digitizer (touch screen) saying that previous one is broken. But, luckily the new one didn't responded to any touches they make.So, they replaced it again with the old one quoting that "your phone can't be repaired". So, i took it home with me.
Later i thought to calibrate the screen but the old one is not responding any more, no matter where i press
Later i calibrate it with the help of a software for windows mobile with the help of a PC. It took me to the calibration screen, from where i calibrated it, and voila, it worked... as good as a new one :victory:
long story short,
i think when you disconnected your digitizer, phones default values/drivers got messed up and are unable to find the new or the old digitizer you connect. I suggest you to go to the service center as these screens can not be calibrated.
Is there NO WAY at all to recalibrate the screen from the phone itself? or using an application? the delicalibration might be the problem....I'd like to fix it myself :/ thanks for the tip, never heard about it before!!
saman0suke1 said:
Is there NO WAY at all to recalibrate the screen from the phone itself? or using an application? the delicalibration might be the problem....I'd like to fix it myself :/ thanks for the tip, never heard about it before!!
Click to expand...
Click to collapse
Did you change the LCD and the Digitizer (both of em) again ?
dark_prince said:
Did you change the LCD and the Digitizer (both of em) again ?
Click to expand...
Click to collapse
I replaced my original digitizer screen for the one I ordered it, it gave me problems, so I went back to the original one, which was working fine, and now it's not fully responding, that's why I'm assuming is something calibration related, thanks!
help
my search button back light is not glowing ..i saw it is also not glowing in recovery...any help