Database Users

screen just shows lines

anyone know how/where to get an xda mini II repaired? i'm in italy, but i can careless where it has to go. I'm at the point where i would rather just sell the device for it's workable parts (if there are any)...Today the screen has done a myraid of interesting things...anywhere from blank to thousands of vertical lines....ugh...
ohh yeah...warranty is void....or is time to just move on?

ok...no answers so i thought i would add some images ...anyone seen this before?

Mate i had a similar **** up a while back ...I did a HR and it worked fine..for me it was caused by a Overclocking software [Dnt want to Name it ]
If this dnt work try the Batt out and back in trick
Call ur Local service Center...

mine looks exactly teh same! but it happened after i tried to replace my housing, i screwed up the little gold prongs where the ribbon connector from the lcd plugs in...****! any ideas on how to fix? im the us so service center isnt really an option, and id ont want to send it off.

hi i had the same problem with my magicians, after i changed the housing. i found the problem with my device was that i had not plugged the screen back in properly. all i did was to ensure that it was pushed in properly before i clipped it back in

Menappi -
I had the exact same issue. I reopened the casing WITHOUT disconnecting any cables. I flipped the screen's ribbon black lock up, while maintaining pressure on the ribbon so that it does not pop out. When the black lock lifted, the preasure of my finger moved the ribbon further in . I pushed the black lock down, reassembled the device and ... PRESTO!! the screen works perfectly... and chumps on the bard advised to buy a new screen!!
Good luck

Hi All,
seems, you have problem somewhere in display connector. However, sometimes I see similar picture on physically broken displays, let's imagine, you were careful ad didn't use a hammer during housing replacement.
There are two possibilities: at first - try to remove and re-insert display cable (I hope, you know. how brown lock works). If there is no success - try again. At second - some wire on flat cable may be damaged. Sometimes, good technician with soldering iron can fix it, sometimes not. And if you used force, removing cable, board connector may be damaged too. However, only the experienced man can find it easily.
So, try to carefuly re-insert display cable. Try several times. If you are unsuccessful, you, for sure, need an experienced technician to fix your device.
I hope, you are not enough mad to send device for repair to Russia

Trinity repair question please help

hii !!
my trinity has an lcd problem, it does not turn on , although other functions work fine.
i think it is the lcd socket?? because the black thing that secures the lcd cable fell out and im unable to put it back in. so the lcd cable is inserted in the socket without the black clip. im pretty sure its still in when i reassembled the phone though.
although one of the pins in the socket was previously bent however i managed to make it straight at least i think so. so after many tries, at times the lcd will light up with a dim light, at times the light is brighter, with the touch screen working.
sorry if this is a noob question but i was wondering what needs to be replaced. or if it can be easily fixed???
thanks for reading =) any advice will be greatly appreciated

also the it lights up without any picture. just light thanks

I had the same problem so I sent my phone to HTC repair centre just to find out that they couldn't fix it. I had nothing to lose, so I experimented. Anyway, 4 layers of duct tape will solve your problem. Stick them at the exact place where the black clip was and that's it. Don't give up trying!

thanks for ur suggestion
i tried that but to no avail
the lcd just lights up dimly but no picture, touch screen works
is it possible to be lcd damage, possibly water damage ?
or possibly can it be the mother board ?? all other components work fine, its just the screen

Maybe it's LCD, I don't know.
You have to put it all together and fasten all screws to be sure that my suggestion doesn't work. I must have done it all at least 50 times before I managed to make it work without a problem.

What a STRANGE problem with my buttons and LEDs! Ideas?

Hi guys!
Long time no post!
I hope you can help point me in the right direction.
Two things started happening with my 8525 TyTN, rendering it unusable. I do have a backup one, so it's no panic. But I would LOVE to try to repair this.
Here's what happens!
1 - The two LEDs in front don't work! No green; no blue; no amber. (HOWEVER, When I first replaced the battery after a hard reset, I did see is glow red for a second!)
2 - None of the buttons on the front work! None. Start/End, the D-pad, mail, internet explorer. All dead!
Interestingly enough... the LCD screen is perfect, as is the touch screen.
The unit also works perfectly fine.
I did a Hard Reset.
I am using WM6.0.
I am wondering... PERHAPS there is some kind of ZIF cable that goes from the body to the top panel? MAYBE that came loose?
If you have seen inside your TyTN, is there one cable/ribbon for lights/buttons?
If so, that would explain it!
If there are two cables/ribbons.... one for lights, one for buttons, then the odds of them BOTH falling out are near impossible!
I would LOVE to hear any ideas or thoughts!!!
Thanks as always!!!!!
Mike

Hello and welcome to a new phone!
I have a similar problem, mine sometimes gets a white screen and the D-pad buttons rarely work for long.
It is quite possibly a loose ribbon cable.
There is actually a thread here about this issue - just do a search for 'white screen' or similar and you'll find it. It was posted to within the week so shouldn't be far from the top if you browse for it, but I can't remember which Herme's category it was in.
There's even a full guide with pics to pulling your 8525 apart!
Cheers! Oggy. ó¿ó

try a new rom,.

I have the same problem. I thought it was bcs my TyTN fell down once. It started with Iexplorer always popping up when I wanted to do something. I thought the IE button at the top was stuck or something and when I pressed hard on the message button everything was okay. All buttons worked. But after a few days they stopped working and pushing the message button wont work also. And both the red and green call button leds are always shining. It sometimes happens that the dpad works for a second and than nothing.
I used the original wm5 and flashed to 6.1 now, no change tho.

it's not the rom, tried several roms now
for me it's just the call answer button, but this is annoying enough
there are some topics in the hermes section which describe the problems you encounter or even worse problems (the lcd flickering or just giving you a bright shining white) and they all say it is a loose cable connector right under your dpad
some of them opened their tytn (guarante already gone) and put some sort of paper or rubber or sth else on the connector.
other say tighten or loosen the screews worked for them, but none of the solutions seem to be final, it always works for some time.
if you have still guarantee i would try sending back or try somewhere else a repair, that is what i will do with tytn
i hope i do not have to pay for the repair
good luck

Loose screw
I was able to fix this problem after ATT told me that I was out of warrenty and it was going to cost 499.00 for a new phone.
I it turn out it is a loose screw on the inside and to get to it you have to undue 11 screw to get to it. I might be able to fix it for you. I dought you would be able to get into this phone and not hurt any of the other functions.
Rick

Hi,
could you advise how you managed to fix it?
Thanks.

button failure and white screen
I have the same problems, if I turn off and on for 3/4 times everything back to normal. But is really annoying because I miss calls.
To me seems a software issue.... I can solve it by turning off the screen does not make sense hardware problems
have a look to this post:
http://forum.xda-developers.com/showthread.php?t=435281
I have still to test the suggestion of schaps advance config version 2.02.1.0.0

Sorry it not a software issue and you can flash a 100 roms and it still won't work. You simply have a bad flex cable and possibly a defective dpad circuit board. You have to crack open the phone to replace it and it has to be carefully done. There are tons of DIY's about opening the phone and replacing the cable. There are even YouTube Videos about it.

X1 Ribbon cable - what happens and a fix I came up with!

Hi, I come on here quite a lot for information as it's an amazing resource! This time however, I'm attempting to give something back!
I experienced the "black screen on slide out" on Monday. Phone completely screwed. I've also had a few droppages and had it apart once before so there's no way warranty is gonna help!
I stripped it down and soon discovered what it is that actually fails on the ribbon. The coating had worn through due to rubbing on something during the slide out / in process. it had been playing up for a while, probably due to shorting out on the metal case, but now the tracks (aluminium?) had worn right down.....
In pic 1 i've circled the worn area. The shiny section is where i'd tried taping over it to prevent shorting, before i realised the tracks were gone.
Got an almost new one off ebay for 15 quid and, realising it was going to happen again, came up with a solution that, so far, looks like it will work....
A while back I bought some "anti rattle felt" for my car's dashboard - really thin and strong self adhesive felt to prevent squeaking joins between dash sections. I cut a piece of this and stuck it to the new ribbon. Once this stuff is on it's well stuck, by the way!
See pic 2 for the modded ribbon cable.
On reassembly everything is working just fine so far! Here's hoping that it lasts longer than 6 months this time!
Just need a new casing now as mine is decidedly second hand!
Hope this turns out to be of use to someone!

cool story bro

when i took apart my xperia to replace the housing this seemed like a really weak point in the device. glad to see someone who has had the problem has been able to fix it

Why does the screen go black?

Hi,
When the coating wears off the ribbon cable it exposes the tracks in it. when you slide the keyboard out the exposed tracks short out on the metal casing and the screen loses it's input signal.
thats whats happened on mine at least and i presume quite a few others?
HTH!

Update:
That's interesting: My phone was also losing signal with the keyboard out, and occasionally while closed up as well. It would just randomly drop to "no signal" for a few seconds.
It hasn't done it since replacing the ribbon cable.....could be coincidental of course.

I'm having the same problem
It just started a week ago and I got the phone in January off of ebay. I'm new to opening up the phone so could anyone help me find the correct tools or have a link to a site with pictured instructions?
I noticed that the sliding mechanism started to go loose about 4-5 months ago but didn't expect the screen not respond in landscape mode. I have yet to see the other symptoms you all are referring to. I would like to fix this before it get worse.

In mine case it went totaly black after one week of this problem... You have all the instruction on youtube, there is where i looked. For tools you can be inovative, but the exactly right ones come with housings from ebay, it is only 15EUR, and i bet you have some cracks so it wouldn't hurt replacing. That is what i did, along with ordering new sliding mechanizm, and new ribbon cable.
I am open for ideas to prevent my ribbon cable from being cut at it weakest point again.

I'm assuming my flex ribbon went bad yesterday, since sliding the keypad out causes my screen to shut off.
Already ordered a cable off ebay and will attempt to replace it myself :O

Replaced my flex ribbon cable with one I bought on eBay. The screen doesn't turn on at all now, which leads me to believe the cable I was sent is defective. Put the old one back in and it works okay, less landscape mode. ughhh what a pain.

great tips! my input is I bought a case off of ebay that was ~60$ and everything actually fit fine for me...so I wouldn't discount every seller but you do get what you pay for, the 15$ cases are probablly the ones that will give you problems

I working in a mobilephone repair center if anyone need help drop me a priv... i able to get 2nd hand or even brand new components

Replaced the flex ribbon cable -
I got my flex ribbon cable a few weeks ago and took it to my local repair shop. They replaced it but the LCD screen/optical joystick receives no power. The touchscreen and everything else on the phone works just fine now. I thought it was a defective item so it was exchanged with a new one.
Got the repair shop to replace it again and the outcome still remains the same as the first.
Theres no light coming from the screen nor the side illumination.
I just told the repair shop to just place the original back in for the mean time.
Before the repairs, there would be a flicker of white light and random illuminations. Now there's no lights at all except the power botton.
Could it be defective a batch that the seller was sending out? or the repair shop's mistake and is playing dumb so they do not have to admint fault?
Hopefully there's an easy fix to this problem.
-Also I did inspect the ribbon before and after the repair. looks new as the OEm
Can anybody help me out with this new problem after replacing the cable -

perhaps you should try a hard reset. Ive had problems in the past where the optical joystick and the illuminators did not work, and that worked for me.
On the other hand, the top illuminators are on the same piece of hardware as the flex cable that was replaced, so a faulty flex cable is possible. The bottom illuminators are on the circuit board that the optical joystick attaches to, separate but connected to the flex cable.
Ive recently replaced my flex cable and touchscreen. The experience i had with the faulty touch screen was that it appeared to receive no power, but was in fact displaying a dark backlit illumination that could only be seen in the dark. At the same time however, the screen did not display anything. I'm not sure if this is similar to your experience, but if so then your touchscreen would need to be replaced.
ive done all repairs on the xperia myself, and one thing ive discovered is if something doesnt work right after a repair, simply disassembling it and reassembling it to make sure all the connections are properly done has worked for me in the past.
"Before the repairs, there would be a flicker of white light and random illuminations. Now there's no lights at all except the power button."
Now when you say the power button, do you mean that a red light appears under it?
I dont know if i can come to a conclusion or that i can help (or have helped) you come to a conclusion, but i can only assure you that the xperia acts out in strange and weird ways.
Good Luck!

Tags
Dismantle / Disassemble Sony Ericson Xperia X1
http://www.ifixit.com/Teardown/Sony-Ericsson-XPERIA-X1/788/1
http://www.formymobile.co.uk/xperiadisassembly.php
http://www.youtube.com/watch?v=AWDurQrRt-Y (REAR)
http://www.youtube.com/watch?v=iyGUbxFqvyc&feature=related (FRONT)
http://www.youtube.com/watch?v=elgC8hwHfYQ&feature=related
For info.
Mike

Thanks for the links. I've tried the hardreset and restoring the original rom but the issue is still there. It's really bugging me that everything works but the LCD screen. I'm currently using MyMobiler to use my phone. The touch screen works fine and so does the soft keys. Just no power for the lights. I might just give up and wait for another phone that catches my eye and then tinker with the xperia myself. but if anyone got a solution or want me to test something then I'll give it a try.
My warranty is no longer affective so I'll use my phone as a tester to help others with any problems.

TRIONDAVE, how's your Xperia running now with the cable mod that you did? Its been 6 months since you created the thread. I hope you're still around.
My Xperia X1 works nearly fine, except for the keyboard issues, so I'm thinking of opening it up. If your Ribbon mod helped I might just do it too once I've got it opened. Mine has a MOUNTain of cracks though, and the battery compartment itself is cracked on both side enough to make the compartment CURVED. Hence the Battery cover doesn't sit well.
I'm looking around for broken Xperias which I might be able to use to change the internal cracked casing. Lets see.

DatDereX1 said:
cool story bro
Click to expand...
Click to collapse
My thoughts exactly.

Hello guys, I am in need of real help over here!
Its just that Ive replaced my ribbon cable, the old one got screwd up.
However I got done for 10 minutes ago, tried to start up the phone.. without success :,(
The ribbon cable doesnt have anything to do with the start up, only the screen am I correct? Cause I cannot even start my phone..
Ive connected the charger, but when I remove the battery it shows a red light, meaning no battery, correct?
So what may the problem be exactly? Maybe the battery is all dead, or?
PLEASE HELP!

for the people with ribbon failures how long have you had the phone before it occurred ? im just interested on the cables lifespan.
mine is fine so far but i have noticed the slider is flimsy and rocks left and right.

possible solution to snowy unresponsive display on htc one m7

Hello all, i'm by no means an expert but i thought that possibly someone else may benefit from this info.
I have repaired a couple of these handsets and i find them lovely to work on, i have purchased a few with the same issue specifically snowy, laggy , unresponsive display.
with the back off look just above the charge port u will see two ribbon connectors pop up the stay and unplug the black coloured one if there is black glossy adhesive tape attatched remove it (this is what's causing the issue) , turn the handset on and let it boot and then carefully reconnect the ribbon connector,push the retaining stay back down into place making sure you have no kinks in the cable .
reassemble the handset and restart.
this has worked for me on the last half a dozen or so handsets that had this issue .
hope this helps someone