Hello people I try find out what the problem is since two weeks of the two hd2 i have around me.
Both are on Windows Mobile 6.5 and..one is tmobile one vodafone
on HSPL 3.03.0000
both stuck in Bootloader at serial,
when I play on softkeys from the vodafone the laptop says: USB device couldnt detected, it had repaired at the micro usb port few weeks ago because couldnt charge anymore
tmobile device shows no reactions
I tryed serval Micro USB Cables, no luck
un/installed Windows Mobile Device center many times
installed Windows XP, Vista 32bit, windows 7 64bit many times
I just dont get it...
any culosions?
any help is welcome, thanks for helping me
MORE INFOS:
T-Mobile HTC HD2 with WINDOWS 6.5
R 2.15.50.14
G 15.42.50.11U
D 3.14.04666
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
Vodafone HTC HD2 with WINDOWS 6.5
R 2.15.50.14
G 15.42.50.11U
D 3.14.04666
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
So Similar to me ...
hd2fordads said:
Hello people I try find out what the problem is since two weeks of the two hd2 i have around me.
Both are on Windows Mobile 6.5 and..one is tmobile one vodafone
on HSPL 3.03.0000
both stuck in Bootloader at serial,
when I play on softkeys from the vodafone the laptop says: USB device couldnt detected, it had repaired at the micro usb port few weeks ago because couldnt charge anymore
tmobile device shows no reactions
I tryed serval Micro USB Cables, no luck
un/installed Windows Mobile Device center many times
installed Windows XP, Vista 32bit, windows 7 64bit many times
I just dont get it...
any culosions?
any help is welcome, thanks for helping me
MORE INFOS:
T-Mobile HTC HD2 with WINDOWS 6.5
R 2.15.50.14
G 15.42.50.11U
D 3.14.04666
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
Vodafone HTC HD2 with WINDOWS 6.5
R 2.15.50.14
G 15.42.50.11U
D 3.14.04666
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x30
Click to expand...
Click to collapse
Dear Friend ... I think The problem can get solved By installing the HTC Drivers ... I happend to me many times and it solved it easily ... Goodluck
With Best Wishes
Hitman1387
Installing the latest HTC Drivers from the HTC Sync Manager bundle usually solves this issue, but for some Sense-based Android ROMs older versions may be useful. However sometimes Windows could choose alternative drivers for the device (RNDIS or Mass Storage instead of Serial/ADB driver). In that case use Device Manager to update driver. Browse to %SystemRoot%\DriverStore\FileRepository and look for the drivers (try sorting by date).
And just in case I could help, may I ask why you'd put the device into bootloader?
Sent from my HTC One X using XDA Premium 4 mobile app
Related
Hello,
Playing with and testing many programs crowded my registry (there are always bits of data left after programs removal).
I would like to refresh my phone by loading the factory defaults so I would reverse the phone to the status "ground 0" like I've just received it from the retailer.
How do I do that?
Thank you in advance!
Tsk tsk... it's all in the manual!
Have a look at this mate...
http://hardreset.eu/htc_hd2_leo_hard_reset_soft_reset_en.html
Start-settings- Security-Factory Reset
upgrade ROM code error (Please Try Again)
PB81100 SS-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0X50
Upgrade ROm code error
Please Try Again
this what my screen says after i got an error on returning to LEOIMG.NBH
i want to return my os to windows mobile 6.5...after so many month using android nand
Please help me with this error...
i tried the hard reset and soft reset...
hope to hear from everyone who are genius and kind xda developers..
jtreyes_dimanche said:
PB81100 SS-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0X50
Upgrade ROm code error
Please Try Again
this what my screen says after i got an error on returning to LEOIMG.NBH
i want to return my os to windows mobile 6.5...after so many month using android nand
Please help me with this error...
i tried the hard reset and soft reset...
hope to hear from everyone who are genius and kind xda developers..
Click to expand...
Click to collapse
When I got problems because of Magldr 1.13, I went first to SPL 1.66 using HSPL2, then first flashing stoc ROM 1.66 and then stoc ROM 3.14.
I hope it helps
Hello, I'm trying to flash my friends stock HD2 with
[11JAN'12][ZIP] ★★★★HyperDroid-CM7-v5.7.0[a2sd][CyanogenMod7 LEO 2.3.7][fikret-r1.15] http://forum.xda-developers.com/showthread.php?t=769026
I can't figure out what I'm doing wrong and I need help.
Some info on the HD 2 I'm trying to flash:
OS version: 5.2.21913 (21913.5.0.94)
ROM size: 512 MB
ROM version: 3.14.409.2 (04666) NOR
Radio: 2.15.50.14 (Stock)
I used HSPL4
When I boot the phone with vol.down+power it says:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
When I connect the phone to my PC with microUSB the white square in bootloader changes from SERIAL to USB, but WMDC on PC says Not Connected.
When the phone is turned on and in Windows Mobile, WMDC says Connected, and I can browse the files on the phone from my PC.
MAGDLR finds the phone and says update from Image Version 3.14.409.2 to Image Version 2.00.000.0. When I click next the phone boots into bootloader mode and then the percentage bar show up on both PC and phone. The bar does not move, stays at 0% for 5 minutes until MAGLDR times out.
I have tried with 3 different PCs (Windows 7 x86 and x64 and Vista x86), 2 different USB cables. Antivirus is disabled, and I run MAGLDR in admin mode. I also tried MAGLDR111. Same result on all. 0%
Any takers?
you need hspl 2.08.
If you have installed this, you magldr flash will go ahead
Haven't I already got hspl 2.08
klorin said:
...
I used HSPL4
When I boot the phone with vol.down+power it says:
PB81100 HX-BC
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
...
Click to expand...
Click to collapse
No, this is SPL.
take HSPL 2.08 from menu..
With HSPL4 you have different Bootloader.. take the right one
its the last 4 digits that are the telltale, , if an spl ends 0000 its stock, if it ends hspl its, , ,wait for it, , HSPL!
Make sure your Phone is loaded for min 50% better is 100%!!
In 3 Color Bootloader Menu you must have USB Connection!!
In HSPL4 you choose 2.08.HSPL,this is the right one.
Now you follow the description of the Programm.
At least on your Phone you can read a notification like "We hacked it".
Congratulation you have HSPL 2.08 ;-))
Hello guys,
I have a HTC HD2. ( Not the T-Mobile version ) . My sister tried to update the phone to android. i don't know what she did but now the phone don't starts it shows a screen ' Software update failed, Please try again ' and then shows the Red-Green-Blue-White screen with this message.
HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
Now what should i do to upgrade the phone to android ?
( P.S - I am a total newbie in android platform. )
Try a search on this site for Android install and follow the instructions, looks like your sister got part of the way there but failed somewhere along the line.
[email protected] said:
Hello guys,
I have a HTC HD2. ( Not the T-Mobile version ) . My sister tried to update the phone to android. i don't know what she did but now the phone don't starts it shows a screen ' Software update failed, Please try again ' and then shows the Red-Green-Blue-White screen with this message.
HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(Touch) 0x40
Now what should i do to upgrade the phone to android ?
( P.S - I am a total newbie in android platform. )
Click to expand...
Click to collapse
Well you need to download HSPL4 for HTC HD2 and install or better say downgrade it to HSPL 2.08. You can find it here on forum just give yourself some time and search. There was already the same thread and I wrote how to solve it. You need to go to bootloader mode first. Turn off your phone and hold volume down button and hold it while you press power button. Hold both of them until you see three color screen. Then comnect phone to pc and run HSPL4 on your pc and choose HSPL 2.08 in the menu flash it and wait until you see we hacked it on your phone. Then you can flash any custom rom. I recommend flashing using pc. Not using sd card method.
And next time read carefully when installing android on your phone.
Sent from my HTC HD2 using xda premium
RUUNBH
PB81100 SS-BC
SPL-3.03.0000 XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X50
UPGRADE ROM CODE ERROR PLEASE TRY AGAIN
help me in this case
trying from last 3 hours but cannot find useful information on this error
I used to have android on my htc hd2 I wanted to roll back to windows so I tried to follow the steps
downloaded the rom from htc site and I found it is wrong
my hd2 is not t mobile
its model number is T8585
made in taiwan
hspl4 does not recognise the phone
gives out connectivity error
but my phone shows usb in white boot loader
when i tried with other rom it gives out 00028002 dont allow message
so if any one can help me please.......
How to restore stock ROM on HTC HD2?
hi guys i have htc hd2 but it's android and it has full memory problem so i want to get it on stock
can you help me ???
the htc hd2 is on android 2.2
thanks
samhawk said:
How to restore stock ROM on HTC HD2?
hi guys i have htc hd2 but it's android and it has full memory problem so i want to get it on stock
can you help me ???
the htc hd2 is on android 2.2
thanks
Click to expand...
Click to collapse
Just flash a stock ROM from the bootloader (using your PC and a micro USB cable). If you need stock SPL then you'd have to either flash that separately or flash a ROM via your SD card.
Could someone kind enough to explain how to flash a ROM via the SD Card please? When I try flashing a stock ROM from windows, it always says the HD2 is not connected to the computer through USB but the HD2 itself on the white area already said it's in USB mode, thanks.
By the way, my HD2 was flashed to Android ROM before and it had a startup " 1e FATAL HIT" problem.
I have successfully flashed task 29. Now my next step is to flash the stock rom, and since my computer's hard drive went dead a few months ago I have lost all my "tools" that I downloaded when flashing the HD2 from WINMO to Android.
Looks like the desktop somehow doesn't connect to the HD2 after the task29 flash. On the bootloader screen it says
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x40
Much appreciated for any help.
HELP HELP
hi
i have HTC HD2.. Today I've tried to install stock rom windows mobile 6.5 but ROM wasn't correct
now it shows
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Upgrade Rom code error
please try again
MAC: 002376BD0E4A
P/N: 99HJY039-00
S/N: HT025NW00152 C
Plz give me the proper ROM for my HD2
i can flash it via SD card
Advance Tnq All