Volume boost mod - G2 Q&A, Help & Troubleshooting

Looking for flashable volume boost for CM11. I haven't found one that works and editing mixer paths XML has proven to be worthless.
Thanks.
Sent from my LG-D800 using XDA Premium 4 mobile app

holeshot77 said:
Looking for flashable volume boost for CM11. I haven't found one that works and editing mixer paths XML has proven to be worthless.
Thanks.
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Volume boost of what? Headphones? Speaker?
Editing mixer_paths.xml is the only way to do it. If you already tried something along those lines, you did it wrong.
Sent from my LG-D802 using XDA Premium 4 mobile app

I´ve edited the mixer paths with a root explorer, and after reboot the device the audio is improved. Maybe you need to try with different values in:
<path name="speaker">
<ctl name="RX7 Digital Volume" value="70"
and
<path name="headphones">
<ctl name="RX1 Digital Volume" value="58" />
<ctl name="RX2 Digital Volume" value="58" />

Thanks everyone. I'll give it another go.
Sent from my LG-D800 using XDA Premium 4 mobile app

I'm on Ota 4.4 running jasmine rom and nc2 kernal on Verizon note 3 and I've gone to 100 and still no difference I used root browser pretty bummed cause I like to listen to music while I work but I can barely hear it over the compressors and such any help would be great

Related

Zip to fix battery meter?

Does anyone know where I can find the zip to flash that mods the battery meter to work in 1 point increments instead of 5. I found it before but can't find it now.
Thanks.
Sent from my SPH-D700 using XDA App
ssconceptz said:
Does anyone know where I can find the zip to flash that mods the battery meter to work in 1 point increments instead of 5. I found it before but can't find it now.
Thanks.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
instead of 5? it should be 1%... thats how it is stock
I'm sorry but the stock battery meeter is garbage, not even close and that's after I calibrated the battery. I have a battery widget that shows correct readings.
Sent from my SPH-D700 using XDA App
steviee7 said:
instead of 5? it should be 1%... thats how it is stock
Click to expand...
Click to collapse
not even close...
Code:
<item android:drawable="@drawable/stat_sys_battery_10" android:maxLevel="19" />
<item android:drawable="@drawable/stat_sys_battery_20" android:maxLevel="34" />
<item android:drawable="@drawable/stat_sys_battery_40" android:maxLevel="49" />
<item android:drawable="@drawable/stat_sys_battery_60" android:maxLevel="64" />
<item android:drawable="@drawable/stat_sys_battery_80" android:maxLevel="79" />
<item android:drawable="@drawable/stat_sys_battery_100" android:maxLevel="100" />
That's stock from the framework-res.apk.. 15-20% increments incase you didn't wanna figure it out...
edit: nvm these arent for ec05
Thanks for the info. Yea I know the zip exists just gotta locate it again.
Sent from my SPH-D700 using XDA App
just get theimpaler747 app that allows you change the battery meter
Sent from my SPH-D700 using Tapatalk
MysteryEmotionz said:
just get theimpaler747 app that allows you change the battery meter
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
he said it needs fixing for EC05
edit: link http://forum.xda-developers.com/showpost.php?p=12430109&postcount=183
chris41g said:
not even close...
Code:
<item android:drawable="@drawable/stat_sys_battery_10" android:maxLevel="19" />
<item android:drawable="@drawable/stat_sys_battery_20" android:maxLevel="34" />
<item android:drawable="@drawable/stat_sys_battery_40" android:maxLevel="49" />
<item android:drawable="@drawable/stat_sys_battery_60" android:maxLevel="64" />
<item android:drawable="@drawable/stat_sys_battery_80" android:maxLevel="79" />
<item android:drawable="@drawable/stat_sys_battery_100" android:maxLevel="100" />
That's stock from the framework-res.apk.. 15-20% increments incase you didn't wanna figure it out...
Click to expand...
Click to collapse
This is my only problem with stock.
Typed by Z using the Gingerbread keyboard.

Continuous input gone?

It was working when I first got my phone but it magically disappeared. The option to turn it on is gone & now replaced with T9 trace.Anybody know why & how I can get it back?
This happened to me also after flashing a new Rom. Somehow it fixed itself after I agreed to the terms of use. Does it say this trial is expired?
Sent from my SGH-T999 using Tapatalk 2
Swype beta it's so much better http://beta.swype.com/android/create/
Sent from my SGH-T999 using xda premium
Swype beta it's so much better http://beta.swype.com/android/create/<br />
<br />
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
That's what I use now. I can't figure out why the stock keyboard changed all of the sudden. Even the Google voice typing quit working on it

[MOD]How To Use DSP MANAGER in Other Players and improve Sound Quality IN CM* Roms

As U All Know That Our S2(GT-I9100)Sound Quality is Not that much good As Other Devices HAve
We have Working DSPmanager In Both CM9/CM10 Roms But IF We Enable Bass Boost and Increase A Volume Little Bit The Sound Starts Distorting(I dontknow Word For it)
So Here Is My Settings And Apps To get Better SOund IN CM10/Cm9 Roms
I Like CM10 Rom More IN Terms Of Its SOund Quality
What U Need Is
1.Cm10/Cm9 Rom
2.Siyah 4.1.x + Kernel Link
3.Jetaudio app Link
4.Poweramp App Link
5.xxtweaker App by Fluxi Link
6.A Good Pair Of Earphones
After Installation Of All Above Things Do SAme AS I say
1.Open Jetaudio Play Any Song
Minimize it
2. Open Dsp manager And Setup BassBoost And Equalizer
Now U Will Here Dspmanager Bass And Eq Difference
3.Open Power Amp Go To Its Settings->Advance Audio Settings
Untick Direct Volume Control
4.Now Manage Its Equalizer (You Can Set According To You)
Play Any SOng Now DSPMANAGER WILL WORK WITH POWERAMP ALSO:angel::angel:
Now Open xxtweaker App i know Its Not Supported By SIyah Kernel just Open It
Cancel The Prompt
Goto Sound and Vibration Then Sound Settings
And Increment The Values AS Shown Above You can increment according to u also but dont change too much in Digital audio values
AFTER ALL THESE THINGS U WILL GET BETTER SOUND QUALITY WITH DSPMANAGER IN HIGH VOLUMES ALSO
Uploaded with ImageShack.us
Is it okay to use Apollo? or do i have to be Jetaudio to have all those awesome config?
cheers
awesome config btw, loving the beats :good:
Really, really helpful! Thanks heaps, bro! This entire article is extremely effective for improving your sound quality, especially the part with xxTweaker. Here is a custom EQ preset made by me for pumping out the maximum possible bass without sacrificing mids and lows:
http://forum.xda-developers.com/showthread.php?t=1709896
BTW, I've changed my headphones since that thread. I own Sennheiser PX100-IIs now, and I don't think I could find a pair better than these for the S II.
saywhatt said:
Is it okay to use Apollo? or do i have to be Jetaudio to have all those awesome config?
cheers
awesome config btw, loving the beats :good:
Click to expand...
Click to collapse
Not tested with apollo
Sent from my GT-I9100 using XDA
SufiSam said:
Really, really helpful! Thanks heaps, bro! This entire article is extremely effective for improving your sound quality, especially the part with xxTweaker. Here is a custom EQ preset made by me for pumping out the maximum possible bass without sacrificing mids and lows:
http://forum.xda-developers.com/showthread.php?t=1709896
BTW, I've changed my headphones since that thread. I own Sennheiser PX100-IIs now, and I don't think I could find a pair better than these for the S II.
Click to expand...
Click to collapse
Atlast It Helped Someone
I'm using the latest paranoid android and siyah kernel and followed all the steps except for the power amp stuff (don't have power amp)
in xxtweaks, I cancel the prompt, but when I go into sound and vibration, everything is greyed out
Sent from my GT-I9100 using Tapatalk 2
PondaRox said:
I'm using the latest paranoid android and siyah kernel and followed all the steps except for the power amp stuff (don't have power amp)
in xxtweaks, I cancel the prompt, but when I go into sound and vibration, everything is greyed out
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Which version of siyah u are using
Sent from my GT-I9100 using XDA
4.1rc1
EDIT: got it working with 4.1.1 and the audio is AWESOME now. thanks button clicked
Sent from my GT-I9100 using Tapatalk 2
I'm using Siyah 4.1.1 but all options in xxTweak are greyed out...
gebazzz said:
I'm using Siyah 4.1.1 but all options in xxTweak are greyed out...
Click to expand...
Click to collapse
Make sure you are on siyah 4.1.1 and you have root access to xxtweaker app
Sent from my GT-I9100 using xda app-developers app
Working with cmiui also
Sent from my GT-I9100 using xda app-developers app
Thanks for this one.
Sent from my GT-I9100 using XDA Premium HD app
Would this work with Neutron Player?
rictee said:
Would this work with Neutron Player?
Click to expand...
Click to collapse
Don't know try it
Sent from my GT-I9100 using xda app-developers app
I know we are talking about audio quality here, but I must say, the theme you are using is amazing
May I ask what you are using for that?
Know any equalizer/player able to set mono sound?
[no poweramp, didn't like it.]
adotkdotjh said:
I know we are talking about audio quality here, but I must say, the theme you are using is amazing
May I ask what you are using for that?
Click to expand...
Click to collapse
That a label theme
Sent from my GT-I9100 using xda app-developers app
marcellocord said:
Know any equalizer/player able to set mono sound?
[no poweramp, didn't like it.]
Click to expand...
Click to collapse
Power amp has an option to set mono. Sound
Sent from my GT-I9100 using xda app-developers app
nitinvaid said:
Power amp has an option to set mono. Sound
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I actually said "no poweramp"
does it work on stock rom?

[Q] AMR-WB on AOSP or CM based ROMS?

I have codefirex's AOSP based rom on my Nexus 4 and I'm on T-Mobile USA. When I call a stock T-Mobile SGSIII on the T-Mobile network, it doesn't sound that great. I tried running stock on my Nexus 4 and it sounded a bit better . I can confirm that the SGSIII is using AMR-WB by the service menu(shows AMR-WB 12.2k). Is there a way to find out what voice codec is in use in AOSP roms? I got some time on my hands so I'm starting my investigation on this.
This Is the build prop command for amr.
# Enable Adaptive Multi-Rate Wideband
ro.ril.enable.amr.wideband=1
Sent from my Nexus 4 using xda app-developers app
Ace42 said:
This Is the build prop command for amr.
# Enable Adaptive Multi-Rate Wideband
ro.ril.enable.amr.wideband=1
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Looks like it works. Strangely 4.2.2 stock's build.prop doesn't have this defined...

[app] Moto X's Kitkat Dailer

So apparently the moto x dialer app works on the droids running KitKat. So here you go. Just push dialer.apk and dialer.odex to system/priv-app. The the odex is probably not needed but Im using it w/o issues.
One issue is this will not replace the stock droid dialer so you end up with two phone apps. Use the blue one. I'm currently working on a mod to the contacts.apk to fix this.
Just a heads up. This is already posted at least 1 other place.
Sent from my XT1080 using Tapatalk
Yeah I tried this from the other thread its cool but doesn't dial and any calls that come in go to stock dialer I just uninstalled it. If this ever gets working 100% great but not till then.
It works fine if you use the flashable zip. Incoming calls will come through the old dialer but all history, outgoing etc work fine.
Sent from my XT1080 using Tapatalk
I wonder if Verizon didn't want us to have this dialer because they have that caller id they charge you to use if so that is B.S. I hope someone figures out how to get this working 100%
The Verizon moto x has the dialer.. I don't understand why we wouldn't get it.. Unless it was the reason people were have issues with moto x
Sent from my XT1080 using XDA Premium 4 mobile app
arcanexvi said:
Just a heads up. This is already posted at least 1 other place.
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
oh i havnt seen that thread, anyone got the link
TheWhiteChallenger said:
oh i havnt seen that thread, anyone got the link
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2578078
Sent from my XT1080 using Tapatalk
cold21blooded said:
The Verizon moto x has the dialer.. I don't understand why we wouldn't get it.. Unless it was the reason people were have issues with moto x
Sent from my XT1080 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
No they didn't the only phone with it is Nexus I believe. They have a thread explaining how to install it as well.
My girlfriend has a verizon moto x and it has it
Sent from my XT1080 using XDA Premium 4 mobile app
cold21blooded said:
My girlfriend has a verizon moto x and it has it
Sent from my XT1080 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I assure you it does not.
Sent from my XT1080 using Tapatalk
arcanexvi said:
I assure you it does not.
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
I assure you that it does.
Jump to 3:20 here - http://youtu.be/qr3sUmf_DJc
.
TechSavvy2 said:
I assure you that it does.
Jump to 3:20 here - http://youtu.be/qr3sUmf_DJc
.
Click to expand...
Click to collapse
I own all 3 devices. The Moto X has an updated dialer (as it has a few other things that didn't make it into the Droid lineup's 4.4 build), however the X's dialer lacks the ability to search by nearby places. One of the most sought after features of the new Nexus dialer. The X's dialer is basically a look-alike that they didn't really add any new functionality to. Here is what it should look like with the proper Nexus dialer. Note that it says "nearby places" in the search bar.
Sent from my XT1080 using Tapatalk
arcanexvi said:
I own all 3 devices. The Moto X has an updated dialer (as it has a few other things that didn't make it into the Droid lineup's 4.4 build), however the X's dialer lacks the ability to search by nearby places. One of the most sought after features of the new Nexus dialer. The X's dialer is basically a look-alike that they didn't really add any new functionality to. Here is what it should look like with the proper Nexus dialer. Note that it says "nearby places" in the search bar.
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
Oh wow well that's a B. I didn't realize the moto x dialer is basically just skined. I thought it was legit nexus dialer. Well I'll be renaming the thread now for the sake of accuracy.
Have they had any success on the x with an actual aosp dialer?
Sent from my XT1080 using XDA Premium 4 mobile app
TheWhiteChallenger said:
Oh wow well that's a B. I didn't realize the moto x dialer is basically just skined. I thought it was legit nexus dialer. Well I'll be renaming the thread now for the sake of accuracy.
Have they had any success on the x with an actual aosp dialer?
Sent from my XT1080 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It can be installed with a flashable zip.
Sent from my XT1080 using Tapatalk
My bad buddy she got the phone last week.. I didn't realized it was skinned.. I don't know how that made me stupid but if you can figure out a way to fix my stupid let me know
Sent from my XT1080 using XDA Premium 4 mobile app
arcanexvi said:
It can be installed with a flashable zip.
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
Dose it actually generate an icon in the apps tray or do you have to use nova launcher or an activity launcher app?
Sent from my XT1080 using XDA Premium 4 mobile app
TheWhiteChallenger said:
Dose it actually generate an icon in the apps tray or do you have to use nova launcher or an activity launcher app?
Sent from my XT1080 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Launcher or activity app. I used https://play.google.com/store/apps/details?id=de.szalkowski.activitylauncher so I could keep using the stock launcher.
Sent from my XT1080 using Tapatalk
tried searching around a little, where can I find the actual flashable zip for the dialer?
arcanexvi said:
Launcher or activity app.
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
Poop
So if I understand correctly the contacts.apk is the app that generates/directs the phone/dialer app icon.
So the question becomes can the contacts app be modified to generate the Google dialer shortcut?
This is the the contacts.apk manifest, would I be correct in thinking this is when the change needs to be made?
</activity>
<activity android:theme="@style/DialtactsTheme" android:label="@string/launcherDialer" android:icon="@mipmap/ic_launcher_phone" android:name=".activities.DialtactsActivity" android:enabled="@*android:bool/config_duplicate_port_omadm_wappush" android:taskAffinity="android.task.contacts.phone" android:clearTaskOnLaunch="true" android:launchMode="singleTask" android:screenOrientation="nosensor" android:windowSoftInputMode="stateAlwaysHidden|adjustNothing" android:uiOptions="splitActionBarWhenNarrow">
<intent-filter>
<action android:name="android.intent.action.DIAL" />
<category android:name="android.intent.category.DEFAULT" />
<category android:name="android.intent.category.BROWSABLE" />
<data android:mimeType="vnd.android.cursor.item/phone" />
<data android:mimeType="vnd.android.cursor.item/person" />
</intent-filter>
<intent-filter>
<action android:name="android.intent.action.DIAL" />
<category android:name="android.intent.category.DEFAULT" />
<category android:name="android.intent.category.BROWSABLE" />
<data android:scheme="voicemail" />
</intent-filter>
<intent-filter>
<action android:name="android.intent.action.DIAL" />
<category android:name="android.intent.category.DEFAULT" />
</intent-filter>
<intent-filter>
<action android:name="android.intent.action.MAIN" />
<category android:name="android.intent.category.DEFAULT" />
<category android:name="android.intent.category.LAUNCHER" />
<category android:name="android.intent.category.BROWSABLE" />
</intent-filter>
<intent-filter>
<action android:name="android.intent.action.VIEW" />
<action android:name="android.intent.action.DIAL" />
<category android:name="android.intent.category.DEFAULT" />
<category android:name="android.intent.category.BROWSABLE" />
<data android:scheme="tel" />
</intent-filter>
<intent-filter>
<action android:name="android.intent.action.VIEW" />
<category android:name="android.intent.category.DEFAULT" />
<category android:name="android.intent.category.BROWSABLE" />
<data android:mimeType="vnd.android.cursor.dir/calls" />
</intent-filter>
<intent-filter>
<action android:name="android.intent.action.CALL_BUTTON" />
<category android:name="android.intent.category.DEFAULT" />
<category android:name="android.intent.category.BROWSABLE" />
</intent-filter>
<intent-filter>
<action android:name="com.android.phone.action.TOUCH_DIALER" />
<category android:name="android.intent.category.DEFAULT" />
<category android:name="android.intent.category.TAB" />
</intent-filter>
<intent-filter android:label="@string/recentCallsIconLabel">
<action android:name="com.android.phone.action.RECENT_CALLS" />
<category android:name="android.intent.category.DEFAULT" />
<category android:name="android.intent.category.TAB" />
</intent-filter>
</activity>
Sent from my XT1080 using XDA Premium 4 mobile app

Categories

Resources