Hi Does any one tried to transfor the data with USB 3.0 cable is it working?
I tried but it's giving normal speed only like USB 2.0 and also its charging slowly(450MA) like normal USB 2.0.
Does any one else facing the same issue?
Please help me guys.
sandeep20064096 said:
Hi Does any one tried to transfor the data with USB 3.0 cable is it working?
I tried but it's giving normal speed only like USB 2.0 and also its charging slowly(450MA) like normal USB 2.0.
Does any one else facing the same issue?
Please help me guys.
Click to expand...
Click to collapse
Do you have USB 3.0 port in your computer?
ecopy said:
Do you have USB 3.0 port in your computer?
Click to expand...
Click to collapse
Yes i have
sandeep20064096 said:
Yes i have
Click to expand...
Click to collapse
Did you also enable the superspeed option in the bios? Did you install the USB 3.0 driver in your OS?
If all of them are not met, your hardware will only run at USB 2.0 speed.
How to enable superspeed in bios
Sent from my SM-G900H using XDA Free mobile app
Just check your bios and search for the usb options where you can adjust the parameters.
jopat said:
Just check your bios and search for the usb options where you can adjust the parameters.
Click to expand...
Click to collapse
it won't charge any faster. and to enable usb3 once you plug your phone in you have to go to the notifications screen and touch the usb options and enable usb 3, it will only stay on for 10 minutes before turning itself off.
u get fast transfer speeds transferring to the internal memory, but the sd card is usually slower
mine won't charge any faster. and file transfer is not noticeably faster using usb 3.0
Related
Can you guys check the NDIS ethernet link speed on your PC when connecting your phone in usb tethering mode through a usb 3.0 port?
I'd like to here from owners of both the exynos and snapdragon version.
Just go to: Network and Sharing Center> Change adapter settings right click on the Remote NDIS connection and select status and
you can see the connection speed in the status window which in case of my xperia z shows as 480Mbps (exactly the speed of usb 2.0)
I'm planning to buy a tablet and the reason I'm asking this is to find a solution for playing with my PC through the tablet just like nvidia shield streaming.
I'm currently thinking of waiting for the Galaxy Note Pro and connecting it with a usb 3.0 cable in usb tethering mode
to my PC and create a 5Gbps ethernet connection between the note and the pc and stream using splashtop.
Anyone?
I am using W8 and the USB stays @2.0. The high-speed 3.0 is kinda unstable on 4.3, I will let you know how it works under 4.4.2.
Also,the 3.0 is not even used by Kies!!!!!
Boshe?
htc9420 said:
I am using W8 and the USB stays @2.0. The high-speed 3.0 is kinda unstable on 4.3, I will let you know how it works under 4.4.2.
Also,the 3.0 is not even used by Kies!!!!!
Boshe?
Click to expand...
Click to collapse
Is that in usb tethering mode or MTP mode?
winie said:
Is that in usb tethering mode or MTP mode?
Click to expand...
Click to collapse
Tethering/MTP it doesn't matter.
For 3.0 mode you need to select a different option.
Hey guys, quick question for those of you with the s5, and the usb 3.0 cable.
I am trying to transfer files from my windows 7 pc. with the usb 3.0 cable.
USB 2.0 works just fine, I switch over to usb 3.0, and the phone immediately dissapears from my pc.
Switch back to 2.0, and it reappears.
Is this happening to anyone else?
Maybe you have a faulty usb 3.0 cable. Try with a different usb 3.0 cable. If it's not the cable try on different computer. After that remains only one possibility: a faulty usb connector which means service. BTW you have usb 3.0 drivers installed on your w7?
Sent from my C6833 using XDA Premium 4 mobile app
Yeah i have a problem with the usb 3.0 too..
When i connect my phone via usb 2.0 it works fine but when i connect it via the usb 3,0 its still only shows up as a usb 2.0 device and the both only charge at 98ma :-/ brand new usb 3.0 cable. unistalled usb 3.0 drivers still no luck.
Not_That_Droid said:
When i connect my phone via usb 2.0 it works fine but when i connect it via the usb 3,0 its still only shows up as a usb 2.0 device and the both only charge at 98ma :-/ brand new usb 3.0 cable. unistalled usb 3.0 drivers still no luck.
Click to expand...
Click to collapse
I've got this issue as well....
except when I attempt it on my work PC with W7 x64 it works in USB2.0 and USB3.0 mode. At home on my W7 x64 build it shows up under my computer in USB2.0 mode but disappears when switching to USB3.0 mode....
tried reinstalling drivers and all that jazz and no luck.
tried two USB3.0 cables and neither work on my home rig. i'm stumped
Plug in another USB 3.0 device such as a memory stick into your computer to determine whether the issue originates from the phone/USB cable or your computer. From what you described we cannot identify the root cause!
Sent from my SM-G900W8 using Tapatalk
I had this issue too, then found it was my motherboard being the issue, i turned xHCI to on instead of auto (in the BIOS) and now when i connect my S5 with USB 3.0 cable the option for that mode will show on the phone.
Auto should work but it didn't seem to allow the S5 to trigger it, maybe because the S5 defaults to USB 2.0 and then you say to it to use USB 3.0
I do notice when switching modes the phone will vasish from the computer and then after a moment or 3 show up again
http://www.tonymacx86.com/lion-desk...te-uefi-motherboards-xhci-mode-explained.html
fiddled with bios settings on ASUS mobo... still no luck
a) Click on “Start” and Right Click on “Computer” and select “Manage”.
b) Now select “Device Manager” and Right Click on the individual “USB controller drivers” and select “Uninstall”.
c) Restart the computer and check if the issue persists.
if the cable is a cheap one that claimed to be usb 3.0 from eBay bin it and buy one from a decent retailer or Samsung
thanks for the ideas, tried device manager uninstall and reboot. still no luck. I"m using the provided samsung usb 3.0 cable so no issues there. very frustrating I cant use my phone connection to it's full potential
v2kai said:
thanks for the ideas, tried device manager uninstall and reboot. still no luck. I"m using the provided samsung usb 3.0 cable so no issues there. very frustrating I cant use my phone connection to it's full potential
Click to expand...
Click to collapse
Old thread I know but here is what seems is the answer.
It seems when first connecting the usb it always defaults to usb2, but then can goto the usb settings on the phone afterwards and switch to media usb3 mode. I have not found a way to make it default to usb3 mode.
chrcol said:
Old thread I know but here is what seems is the answer.
It seems when first connecting the usb it always defaults to usb2, but then can goto the usb settings on the phone afterwards and switch to media usb3 mode. I have not found a way to make it default to usb3 mode.
Click to expand...
Click to collapse
Appreciate the post but the issue wasnt actually switching into usb3 mode. That I knew how to do, it was that when I do switch the phone to USB3 mode it disappears from my file explorer and I cannot access the phone storage media unless I switch back to USB2 and then it pops up again in file explorer. I still havent found a solution and have come to the conclusion it is a hardware issue likely tied to my motherboard and have just accepted it and used it in it's limited form
I don't even see any option on my S5 to switch to USB3.....
Is this option device-specific?? I have the international version SM-G900H
Edit: never mind....the cable I had was a fake....
I tested my S5 with a cable from a USB 3.0 external hdd and it worked...
chrcol said:
Old thread I know but here is what seems is the answer.
It seems when first connecting the usb it always defaults to usb2, but then can goto the usb settings on the phone afterwards and switch to media usb3 mode. I have not found a way to make it default to usb3 mode.
Click to expand...
Click to collapse
This is the solution, thank you.
dglaboi said:
I don't even see any option on my S5 to switch to USB3.....
Is this option device-specific?? I have the international version SM-G900H
Edit: never mind....the cable I had was a fake....
I tested my S5 with a cable from a USB 3.0 external hdd and it worked...
Click to expand...
Click to collapse
So are you saying that if the cable is faulty (or in other words, USB 3.0 is not achievable with the current connection) that the USB 3.0 option simply does not appear on the phone? That may explain why I am also only seeing MTP or PTP with a 3.0 cable and hub
Reading these replies and I still don't have a solution.
I have a Lenovo P50 ThinkPad and I normally connect my S5 via USB 2.0, but I'm wanting to transfer about 20gb of files off my microSD card to my machine. When I connect with 2.0, I can't even get the entire folder to show in the navigator window.
I tried to connect to the 3.0 ports, which I use with my external HDD with no problems. I'm even using the same cable.
And yes, it's a legit 3.0 cable.
Still no solution...
Did you find a solution?
I thought the note 3 was going to be fast since it has usb 3.0 and all that?
I connected it to my front usb 3.0 port and it takes 8 and a half minutes to transfer a 2GB movie onto the sdcard which is a sandisk sdxc class 10 64GB stick while it takes 1-2 minutes when i connect it to my usb 3.0 card reader... how come it's so darn slow through the phone?
The motherboard im using is a Asus maximus VI hero
Is the phone in USB 3.0 MTP mode?
Also, the data is directed through phone motherboard, longer route means longer time (data transfer speed is also affected by the read/write capability of the SD slot on the phone).
andsa said:
I thought the note 3 was going to be fast since it has usb 3.0 and all that?
I connected it to my front usb 3.0 port and it takes 8 and a half minutes to transfer a 2GB movie onto the sdcard which is a sandisk sdxc class 10 64GB stick while it takes 1-2 minutes when i connect it to my usb 3.0 card reader... how come it's so darn slow through the phone?
The motherboard im using is a Asus maximus VI hero
Click to expand...
Click to collapse
Copy it onto the internal and you will notice how much faster it is. With usb 3 mode selected.
Sent from my SM-N9005
andsa said:
I thought the note 3 was going to be fast since it has usb 3.0 and all that?
I connected it to my front usb 3.0 port and it takes 8 and a half minutes to transfer a 2GB movie onto the sdcard which is a sandisk sdxc class 10 64GB stick while it takes 1-2 minutes when i connect it to my usb 3.0 card reader... how come it's so darn slow through the phone?
The motherboard im using is a Asus maximus VI hero
Click to expand...
Click to collapse
There should be some issue, either with your SD card or phone. Test copying same file into internal memory and then into card by usb 3.
I don’t have USB 3 in my PC and I always use 2.0 but transferring a 2GB video file by usb 2.0 never took over 2-3 minutes. By OTG cable from flash drive to sd card, same time. Even over wifi it doesn’t take that much time.
So try formatting the SD card and then input all data and test. I don’t think this will resolve, and you much check with Samsung service center.
Someguyfromhell said:
Is the phone in USB 3.0 MTP mode?
Also, the data is directed through phone motherboard, longer route means longer time (data transfer speed is also affected by the read/write capability of the SD slot on the phone).
Click to expand...
Click to collapse
mtp mode?
andsa said:
mtp mode?
Click to expand...
Click to collapse
After connecting the phone, did you set the phone to USB 3.0 mode?
MTP (Media Transfer Protocol) is the mode to transfer data between PC and phone.
When you connect the phone to USB, the phone is in USB 2.0 MTP mode. You have to pull down notification bar, open the USB notification and switch to USB 3.0.
Someguyfromhell said:
After connecting the phone, did you set the phone to USB 3.0 mode?
MTP (Media Transfer Protocol) is the mode to transfer data between PC and phone.
When you connect the phone to USB, the phone is in USB 2.0 MTP mode. You have to pull down notification bar, open the USB notification and switch to USB 3.0.
Click to expand...
Click to collapse
Oh, forgot about that mode
andsa said:
Oh, forgot about that mode
Click to expand...
Click to collapse
I don't have this usb 3.0 mode here.. just two modes... MTP and CAMERA..
I'm guessing my usb 3.0 from pc screwed up..
Have you got the USB 3.0 drivers installed on your computer?
speedyjay said:
Have you got the USB 3.0 drivers installed on your computer?
Click to expand...
Click to collapse
YES
Renesas Electronics USB 3.0 Host Controller.. And it is updated..
so all my usb entries are ****ed? ..
Or my Note...
Is there a smart developer who can force the usb 3.0 mode into usb tethering?
i would give a paypal donation for this!
Motawa88 said:
Is there a smart developer who can force the usb 3.0 mode into usb tethering?
i would give a paypal donation for this!
Click to expand...
Click to collapse
I guess usb 3.0 will automatically work if you connect to usb 3.0 port.
what exactly you want?
amk19 said:
I guess usb 3.0 will automatically work if you connect to usb 3.0 port.
what exactly you want?
Click to expand...
Click to collapse
i think he needs the same feature that i need, when connected to usb 3.0 port connection with usb tethering stay on usb 2.0 480 mbit/s , instead of 5 gbit/s. It will be cool especially for screen mirroring (for me) and other things that required a bigger bandwidth.
Recently i noticed an unfamiliar behavior on my BS 2.
1) FAST charging no longer works. ( i tried different usb cables & adapters )
2) I cant transfer data into PC using Data cable.
3) OTG also not working.
4) I cant even turn on USB tethering.
Please help me what can i do now.
Well it seems your usb-c port might be damaged
LeeYaoSan said:
Well it seems your usb-c port might be damaged
Click to expand...
Click to collapse
now i can see my phone is getting fast charging again but still no OTG USB tethering :'(