[Q] Installing ROMs on Galaxy S4 I337 - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

Hey guys, I'm new here and I've tried a lot of things to try and install a ROM (AICP ROM to be exact) but I came up with nothing. Anyone mind helping me out here?
This is what I'm running:

sympathizer said:
Hey guys, I'm new here and I've tried a lot of things to try and install a ROM (AICP ROM to be exact) but I came up with nothing. Anyone mind helping me out here?
This is what I'm running:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=52905032
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

netomel said:
http://forum.xda-developers.com/showthread.php?p=52905032
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks for the reply dude. Oh wells

sympathizer said:
Thanks for the reply dude. Oh wells
Click to expand...
Click to collapse
Try this process to root and install alternate TouchWiz roms.
http://forum.xda-developers.com/showthread.php?p=52845548
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

netomel said:
Try this process to root and install alternate TouchWiz roms.
http://forum.xda-developers.com/showthread.php?p=52845548
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I already tried that dude, my phone is completely rooted.

sympathizer said:
I already tried that dude, my phone is completely rooted.
Click to expand...
Click to collapse
Off to a good start then. Install safestrap 3.72 if you haven't already.
Here's a quick rough guide on how to get a custom rom working (switch PurifieD with whatever you'd like to use, note you are limited to TouchWiz. A list of 'confirmed' working roms can be found here, but note if they mess with the kernel there may be Knox 0x1)
Install and boot into Safestrap 3.72, flash PurifieD (wipe not necessary)
If you wish to keep Knox happy with 0x0, do not let PurifieD modify the kernel during the Aroma installer when it asks
Flash an i337 build.prop in order to get 4G LTE working again (you have service without this, but this lets you access LTE again) (you can find this here!)
Flash the WiFi module in order to get wifi working again (WiFi will NOT work unless you flash this) (you can find this here!)
(Optional, I had to do this as I had issues with keeping root on PurifieD, though you might not!) Flash SuperSU again (you can find this here!

Rhymey said:
Off to a good start then. Install safestrap 3.72 if you haven't already.
Here's a quick rough guide on how to get a custom rom working (switch PurifieD with whatever you'd like to use, note you are limited to TouchWiz. A list of 'confirmed' working roms can be found here, but note if they mess with the kernel there may be Knox 0x1)
Install and boot into Safestrap 3.72, flash PurifieD (wipe not necessary)
If you wish to keep Knox happy with 0x0, do not let PurifieD modify the kernel during the Aroma installer when it asks
Flash an i337 build.prop in order to get 4G LTE working again (you have service without this, but this lets you access LTE again) (you can find this here!)
Flash the WiFi module in order to get wifi working again (WiFi will NOT work unless you flash this) (you can find this here!)
(Optional, I had to do this as I had issues with keeping root on PurifieD, though you might not!) Flash SuperSU again (you can find this here!
Click to expand...
Click to collapse
This works for the AT&T Galaxy S4 as well bro?

sympathizer said:
This works for the AT&T Galaxy S4 as well bro?
Click to expand...
Click to collapse
Yes sir! I'm running PurifieD on my ATT S4 right now. Just keep in mind you won't have LTE unless you flash that build.prop and no wifi unless you flash that module.

Rhymey said:
Yes sir! I'm running PurifieD on my ATT S4 right now. Just keep in mind you won't have LTE unless you flash that build.prop and no wifi unless you flash that module.
Click to expand...
Click to collapse
Alright man, thank you! I'll try installing it and let you know if I get any trouble!! :laugh:

Rhymey said:
Yes sir! I'm running PurifieD on my ATT S4 right now. Just keep in mind you won't have LTE unless you flash that build.prop and no wifi unless you flash that module.
Click to expand...
Click to collapse
Hey dude, it says that I'm completely unrooted. I don't know how to flash it if I can't boot into recovery via SafeStrap.

sympathizer said:
Hey dude, it says that I'm completely unrooted. I don't know how to flash it if I can't boot into recovery via SafeStrap.
Click to expand...
Click to collapse
Yup, that's the problem I was having. You have to downgrade to MK2 again, root using whatever you prefer, and start over but this time after flashing the ROM, immediately flash SuperSU (i linked it in my other post).

Rhymey said:
Yup, that's the problem I was having. You have to downgrade to MK2 again, root using whatever you prefer, and start over but this time after flashing the ROM, immediately flash SuperSU (i linked it in my other post).
Click to expand...
Click to collapse
The Wifi doesn't work, even though I flashed the appropriate zip. Any ideas as to why?

sympathizer said:
The Wifi doesn't work, even though I flashed the appropriate zip. Any ideas as to why?
Click to expand...
Click to collapse
Uhm. Go into download mode and flash NC1s modem? http://forum.xda-developers.com/showthread.php?t=2496517
Alternatively try reflashing the NC1 modules again. If you dirty flashed that might've been the issue too, as when I initially tried to flash purified i know mine wouldn't work until i wiped

Related

Rogers galaxy s4 (SGH-I337M)

hey guys, how do i root a galaxy s4 (SGH-I337M) from rogers running 4.3 MK6?
Try cf auto root suppose to work
http://forum.xda-developers.com/showthread.php?t=2293800
zild8 said:
Try cf auto root suppose to work
http://forum.xda-developers.com/showthread.php?t=2293800
Click to expand...
Click to collapse
thanks bro it worked, which rom are you on n can u send me the link also or do the at&t roms work as well?
i use omega v15 for now and i love it ,they just release v 16,i always flash rom from i9505,dont use i9500 rom its different
http://forum.xda-developers.com/showthread.php?t=2253528
You also will need to flash a recovery like this one
http://forum.xda-developers.com/showthread.php?t=2322682
Dont use the loky version its for att
zild8 said:
i use omega v15 for now and i love it ,they just release v 16,i always flash rom from i9505,dont use i9500 rom its different
http://forum.xda-developers.com/showthread.php?t=2253528
You also will need to flash a recovery like this one
http://forum.xda-developers.com/showthread.php?t=2322682
Dont use the loky version its for att
Click to expand...
Click to collapse
What's a good lightweight, no bloat TW rom? I noticed Omega has a lot of additional features, which I would never use like the Xposed framework.
I was thinking of going with Goldeneye, but not sure if it has been updated to support I337M again.
WarbyParker said:
What's a good lightweight, no bloat TW rom? I noticed Omega has a lot of additional features, which I would never use like the Xposed framework.
I was thinking of going with Goldeneye, but not sure if it has been updated to support I337M again.
Click to expand...
Click to collapse
same here ..
you should try xposed framework ,and wanam xposed .There a lot of xposed module and i can costumize touchwiz like i want,like maximize widget,wich allow me to click on a notification without having to unlock.For shure its a personnal choice.
But in omega you can choose the app that you want ,if you dont want xposed just unselect it ,it use aroma installer when you flash it,you can remove a lot of apps
dajj said:
same here ..
Click to expand...
Click to collapse
Goldeneye never lost compatibility with our phones, so not sure what kind of support you expect or require.? IB4STiD simply requested not to complain from Canadian side for known problems, like lack of 4.3 modem for our phone, which we now got.
Simply flash Canadian compatible third party kernel, (one without knox) after flashing goldeneye, that's it.
Sent from my SGH-I337M
Idan73 said:
Goldeneye never lost compatibility with our phones, so
Simply flash Canadian compatible third party kernel, (one without knox) after flashing goldeneye, that's it.
Click to expand...
Click to collapse
Could you add the kernel link.
Thank you a lot.
EDIT: Do you mean the kernel in step 6 in this post: http://forum.xda-developers.com/showpost.php?p=47819176&postcount=9322
It's in GE thread, first post, Canadian fix. Guess iB4STiD opened it up for us again.
But basically go to original development and whichever tw kernel you pick, follow the links to Canadian or T-Mobile compatible version. Kernel makers usually describe whether we have our own or we should use T-Mobile one
Sent from my SGH-I337M
zild8 said:
i use omega v15 for now and i love it ,they just release v 16,i always flash rom from i9505,dont use i9500 rom its different
http://forum.xda-developers.com/showthread.php?t=2253528
You also will need to flash a recovery like this one
http://forum.xda-developers.com/showthread.php?t=2322682
Dont use the loky version its for att
Click to expand...
Click to collapse
So, as I understand, we absolutely need this Advanced CWM recovery if we are running MK6.
We can't use standard CWM or TWRP recovery?
Bleedos said:
So, as I understand, we absolutely need this Advanced CWM recovery if we are running MK6.
We can't use standard CWM or TWRP recovery?
Click to expand...
Click to collapse
From what I gather, we can use CWM or TWRP, it just blows the Knox counter and warranty is void. Which is why cf-auto-root can still root, and why u can just throw rom manager on to install cwm (then remove, dont install roms with rom manager). This is only for MK6 (rogers/canadian). I would try a cwm or twrp, and just use cf-auto root to reinstall the stock recovery with odin if you run into problems.
.
dajj said:
Could you add the kernel link.
Thank you a lot.
EDIT: Do you mean the kernel in step 6 in this post: http://forum.xda-developers.com/showpost.php?p=47819176&postcount=9322
Click to expand...
Click to collapse
This is only relevant for GE versions 13/14. The latest is GE15. As already explained, just follow steps in 1st post. There is a section called 'Canadian install guide', can't miss it. The fix you flash after the rom is the kernel for our baseband (Step A). Easy as pie. Step B is optional, changes network icons from default to whatever your carrier uses (e.g., 4G to LTE).
I would recommend creating a backup of stock once rooted before flashing custom roms. Not sure if there's ever going to be a fix for resetting knox, but traditionally it was a good idea to have this in case you ever want to revert back to stock and unroot. Also backup EFS to be safe, for more info: http://forum.xda-developers.com/showthread.php?t=1308546. I personally had to use an app for that after updating, knox kept preventing me from connecting to the program but that was when OTA was launched, might work for you.
azuziel said:
From what I gather, we can use CWM or TWRP, it just blows the Knox counter and warranty is void. Which is why cf-auto-root can still root, and why u can just throw rom manager on to install cwm (then remove, dont install roms with rom manager). This is only for MK6 (rogers/canadian). I would try a cwm or twrp, and just use cf-auto root to reinstall the stock recovery with odin if you run into problems.
.
Click to expand...
Click to collapse
FYI I did it the easy way using the Cyanogen Installer.
Ended with CM10.2 and CWM 6.0.4.4.
Then I flashed CWM Touch 6.0.4.4 from CWM. Downloaded TWRP but did not try it.
mafioso345 said:
thanks bro it worked, which rom are you on n can u send me the link also or do the at&t roms work as well?
Click to expand...
Click to collapse
Chaeck out this ROM. Nice and light. Quick with great battery.
http://forum.xda-developers.com/showthread.php?t=2537495
help me modify my galaxy s4 to make it work on wind
zild8 said:
i use omega v15 for now and i love it ,they just release v 16,i always flash rom from i9505,dont use i9500 rom its different
http://forum.xda-developers.com/showthread.php?t=2253528
You also will need to flash a recovery like this one
http://forum.xda-developers.com/showthread.php?t=2322682
Dont use the loky version its for att
Click to expand...
Click to collapse
Hey, i'm new to XDA and i was just wondering if you know how to modify Galaxy S4, Canadian version (SGH-I337M) to make it work on WIND or you might know someone who can help me through this, phone was offically with rogers but now its unlocked and running android 4.3 on it, ill be really greatful if you could help me. waiting for your reply.
Thanks

[Q] GS4 Custom Rom Question

Hey I just have a quick question here. Is there a way to get wifi to work on a custom rom on the ATT GS4 (MK2) because not matter what rom I flash on it the wifi always breaks but when I go back to stock it works just fine. I even tried flashing the modem file but to no avail. If I can't I can understand I was just wanting to know if there's a workaround to this. Thanks to anyone who helps .
You need to flash the MK2 modules. Do some more reading. The modules are in the Safestrap thread.
Sent from Black<3's I337 running Foxhound ROM
DeadlySin9 said:
You need to flash the MK2 modules. Do some more reading. The modules are in the Safestrap thread.
Sent from Black<3's I337 running Foxhound ROM
Click to expand...
Click to collapse
Well when I first tried to install a custom rom I used this website to flash the modules and that was when I realized my wifi wasn't working on it. I'll just read up some more I suppose. Thanks for the response .
Rytiou said:
Well when I first tried to install a custom rom I used this website to flash the modules and that was when I realized my wifi wasn't working on it. I'll just read up some more I suppose. Thanks for the response .
Click to expand...
Click to collapse
Those are all Verizon modules. You need the att ones
Edit, read through this. http://forum.xda-developers.com/showthread.php?p=45693712
jd1639 said:
Those are all Verizon modules. You need the att ones
Edit, read through this. http://forum.xda-developers.com/showthread.php?p=45693712
Click to expand...
Click to collapse
Aah I see. Thanks man

[Q] No Root, Custom recovery and Odin Problems

Hello All!
I just bought a Galaxy S4 Active in Mexico (SGH-i537), is running android 4.3 with baseband i537UBUAMF1 and untill now I can find how to root my phone or install a custom room because Odin sents error when I try to flash 4.4.2 or a downgrade 4.2.2, also I tryed in differents PCs in order to avoid the common problem of the drivers.
Anyone knows what I'm doing wrong?
Thanks In Advance
What root method have you tried? Try saferoot, dint know if it works on the active though
Sent from my Nexus 5
jd1639 said:
What root method have you tried? Try saferoot, dint know if it works on the active though
Sent from my Nexus 5
Click to expand...
Click to collapse
Saferoot says the phone is not supported, also tryed with vroot and lokifyed
ViciousCC said:
Saferoot says the phone is not supported, also tryed with vroot and lokifyed
Click to expand...
Click to collapse
Kingo root is another option
Sent from my Nexus 5
jd1639 said:
Kingo root is another option
Sent from my Nexus 5
Click to expand...
Click to collapse
CF autoroot was the solution!!! If you know how can I install the custom recovery I'll be glad to close this topic
Regards
ViciousCC said:
CF autoroot was the solution!!! If you know how can I install the custom recovery I'll be glad to close this topic
Regards
Click to expand...
Click to collapse
Cool, that means you bootloader isn't locked. Download goo manager from the play store and it should put twrp on your device
Sent from my Nexus 5
jd1639 said:
Cool, that means you bootloader isn't locked. Download goo manager from the play store and it should put twrp on your device
Sent from my Nexus 5
Click to expand...
Click to collapse
Goo manager did not find any recovery or custom rom, another idea?
ViciousCC said:
Goo manager did not find any recovery or custom rom, another idea?
Click to expand...
Click to collapse
You could try rom manager it'll try to put cwm on
Edit, it looks like you need to use safestrap. See this http://forum.xda-developers.com/showthread.php?t=2563991
Sent from my Nexus 5
jd1639 said:
You could try rom manager it'll try to put cwm on
Edit, it looks like you need to use safestrap. See this http://forum.xda-developers.com/showthread.php?t=2563991
Sent from my Nexus 5
Click to expand...
Click to collapse
You sure?
It says "DOWNLOADS:
CONFIRM THAT YOU ARE USING AN AT&T SAMSUNG GALAXY S4 (NOT THE ACTIVE MODEL)"
My phone is the active model
ViciousCC said:
You sure?
It says "DOWNLOADS:
CONFIRM THAT YOU ARE USING AN AT&T SAMSUNG GALAXY S4 (NOT THE ACTIVE MODEL)"
My phone is the active model
Click to expand...
Click to collapse
I'm not sure. I don't know the active well at all
Sent from my Nexus 5
jd1639 said:
I'm not sure. I don't know the active well at all
Sent from my Nexus 5
Click to expand...
Click to collapse
Well I was reading and safestrap have limited funtion about what rom can be flashed... I have only two questions
Is possible to unlock my bootloader (running 4.3) for installing roms with custom kernel ?
Or any way to flash a stock rom without carrier stuff (drebranded)
BR
ViciousCC said:
Well I was reading and safestrap have limited funtion about what rom can be flashed... I have only two questions
Is possible to unlock my bootloader (running 4.3) for installing roms with custom kernel ?
Or any way to flash a stock rom without carrier stuff (drebranded)
BR
Click to expand...
Click to collapse
Well I don't know the active and can only go by what I know of the i337. You're probably on ml3 firmware. The bootloader is probably locked and you can't unlock it. So safestrap is your only option. You'll be able to flash tw based roms only. There may be debloated roms available but you'll have to find those. Try googling i537 roms xda
Sent from my Nexus 5
jd1639 said:
Well I don't know the active and can only go by what I know of the i337. You're probably on ml3 firmware. The bootloader is probably locked and you can't unlock it. So safestrap is your only option. You'll be able to flash tw based roms only. There may be debloated roms available but you'll have to find those. Try googling i537 roms xda
Sent from my Nexus 5
Click to expand...
Click to collapse
Thanks!!!!

ATT S4 KitKat 4.4.2 - Is Cyanogenmod possible? alts...

Hi All,
Appreciate the guides and community here. Looking for a little help on my ATT S4 KitKat 4.4.2. It's rooted via Towelroot.
I want to run a custom rom that isn't slow. I have Odin, proper Samsung USB drivers.
1) Can CNW be used on my phone to boot to recovery? If not, what are the alternatives and how do I use them (is there a guide you can share)?
2) Do I have NC1 on my phone, what the heck is NC2, NC1-what does this mean, is it relevant?
Thanks all
-Christian
If you have updated your phone to the att 4.4.2 firmware then you should be on NC1 which means you cannot put cwm or any CM rom. The only recovery you can use is safestrap. After that you can only flash rooms the specifically say safestrap compatible and you must flash the att_nc1 module after flashing rom for WiFi to work. Read the safestrap thread under the development section before doing anything.
Sent from my GT-P3110 using Tapatalk
Thanks for the help-trying it out now. Will keep ya posted
freestylejunki32 said:
If you have updated your phone to the att 4.4.2 firmware then you should be on NC1 which means you cannot put cwm or any CM rom. The only recovery you can use is safestrap. After that you can only flash rooms the specifically say safestrap compatible and you must flash the att_nc1 module after flashing rom for WiFi to work. Read the safestrap thread under the development section before doing anything.
http://forum.xda-developers.com/showthread.php?t=2572978
Sent from my GT-P3110 using Tapatalk
Click to expand...
Click to collapse
Is this the thread you were referring to?
http://forum.xda-developers.com/showthread.php?t=2572978
Yes, I would also read over All Things ATT/MK2 etc in General--:good:
Those numbers NC1 etc are your build version. Can be found under Settings/About Phone. It will dictate what you can and can't do on your phone--We have no NC2 yet. :good:
rugmankc said:
Yes, I would also read over All Things ATT/MK2 etc in General--:good:
Those numbers NC1 etc are your build version. Can be found under Settings/About Phone. It will dictate what you can and can't do on your phone--We have no NC2 yet. :good:
Click to expand...
Click to collapse
Thanks. I have nb1. No luck getting safe strap to take. Install completes but does not recognize status as installed or allow boot to recovery.
I have rooted, supersu, busybox, and no luck with safestrap. Any ideas.
Upon booting I notice an icon that looks like a unlocked lock beneath the samsung logo. Touching it does nothing...
Thanks for getting back to me
potat5656 said:
Thanks. I have nb1. No luck getting safe strap to take. Install completes but does not recognize status as installed or allow boot to recovery.
I have rooted, supersu, busybox, and no luck with safestrap. Any ideas.
Upon booting I notice an icon that looks like a unlocked lock beneath the samsung logo. Touching it does nothing...
Thanks for getting back to me
Click to expand...
Click to collapse
I don't use safestrap. So not sure. Did you wipe all including system. And flash to correct slot. Stock slot I believe. Use correct safestrap. Also need sellinux, spelling? The lock is suppose to be there if rooted. Read the last 20 pages of the hash code safestrap thread plus the op. And same on All Things ATT/MK2 in General. May give some ideas. ☺
Sent from my GT-I9505G using Tapatalk
rugmankc said:
I don't use safestrap. So not sure. Did you wipe all including system. And flash to correct slot. Stock slot I believe. Use correct safestrap. Also need sellinux, spelling? The lock is suppose to be there if rooted. Read the last 20 pages of the hash code safestrap thread plus the op. And same on All Things ATT/MK2 in General. May give some ideas. ☺
Sent from my GT-I9505G using Tapatalk
Click to expand...
Click to collapse
Aha! Safestrap running and custom ROM installed. Is there an index comparing all Safestrap/Touchwiz based roms? Runnign SHO right now and it's pretty bland (resolution looks low too).
I'm looking for something like a stock nexus experience with WiFi tethering.
thanks for the help mates
potat5656 said:
Aha! Safestrap running and custom ROM installed. Is there an index comparing all Safestrap/Touchwiz based roms? Runnign SHO right now and it's pretty bland (resolution looks low too).
I'm looking for something like a stock nexus experience with WiFi tethering.
thanks for the help mates
Click to expand...
Click to collapse
Not sure on index. Best though to try them yourself as they don't always work the same on different phones.
Sent from my GT-I9505G using Tapatalk
potat5656 said:
Aha! Safestrap running and custom ROM installed. Is there an index comparing all Safestrap/Touchwiz based roms? Runnign SHO right now and it's pretty bland (resolution looks low too).
I'm looking for something like a stock nexus experience with WiFi tethering.
thanks for the help mates
Click to expand...
Click to collapse
Iam all for custom ROMS. I made one for the Tab3. If all you want is the stock Nexus experience, you could just download the Google Now Launcher which is Google release the AOSP launcher. Then if you want the individual AOSP apps, you can do a search here or a google search, and you will find XDA threads that provide the apps with installation instructions.

TWRP

How do I put TWRP on my unrooted TELUS SGH-I337MVLUFNI2
Sent from my SGH-I337M using XDA Free mobile app
wizkidj said:
How do I put TWRP on my unrooted TELUS SGH-I337MVLUFNI2
Sent from my SGH-I337M using XDA Free mobile app
Click to expand...
Click to collapse
You look for cf auto root in this forum and flash that with odin to get root then you download twrp for jfltecan off twrp site and flash that in Odin as well
Sent from my SGH-I337M using Tapatalk
juju2011 said:
You look for cf auto root in this forum and flash that with odin to get root then you download twrp for jfltecan off twrp site and flash that in Odin as well
Sent from my SGH-I337M using Tapatalk
Click to expand...
Click to collapse
Does it apply to Bell model as well using the same firmware?
Mind you I337MVLUFNI2 is 4.4.2, is that still ok, or do we need safestrap?
s3nr1 said:
Does it apply to Bell model as well using the same firmware?
Mind you I337MVLUFNI2 is 4.4.2, is that still ok, or do we need safestrap?
Click to expand...
Click to collapse
No safe strap I'm on bell as well only att needs it just cf auto root then get twrp for jfltecan as recovery and your good
juju2011 said:
You look for cf auto root in this forum and flash that with odin to get root then you download twrp for jfltecan off twrp site and flash that in Odin as well
Sent from my SGH-I337M using Tapatalk
Click to expand...
Click to collapse
juju2011 said:
No safe strap I'm on bell as well only att needs it just cf auto root then get twrp for jfltecan as recovery and your good
Click to expand...
Click to collapse
Thanks, that works for Canadian i377m with 4.4.2. Any recommendation of a stable ROM? Does the 'fringe' features(thermo meter, ir blaster, etc.) of the s4 work on non touch wiz roms like cm or aosp?
Only ir works and with certain apps
---------- Post added at 09:45 AM ---------- Previous post was at 09:40 AM ----------
I would say stick with tw if you use the tw features try @iB4STi tw Roms with @Alucard24 touchwiz kernel what I used for the longest time using cm12 unofficial ATM but if you don't care about tw features then liquid smooth, carbon rom
s3nr1 said:
Thanks, that works for Canadian i377m with 4.4.2. Any recommendation of a stable ROM? Does the 'fringe' features(thermo meter, ir blaster, etc.) of the s4 work on non touch wiz roms like cm or aosp?
Click to expand...
Click to collapse
juju2011 said:
Only ir works and with certain apps
Click to expand...
Click to collapse
Thanks! One last question, I think.
The up to date ROMs here are mostly for safestrap, if it doesn't specify that it works for our phone (bell s4) I probably should not flash it?
Some do say it can be flashed with non-safestrap(twrp) but we need to flash our carriers kernel after.
How can we make a back up of it (the kernel that I have on my phone right now) and make it flashable from twrp?
Thanks again!!
You can't or at least I don't know how... But there are touch wiz kernel that will work alucard or ktoonsez have best kernel for our phone @s3nr1
Also check in 19505 s4 thread thats where I find all my Roms that are aosp for touch wiz look in i337m/att s4 section.
s3nr1 said:
Thanks! One last question, I think.
The up to date ROMs here are mostly for safestrap, if it doesn't specify that it works for our phone (bell s4) I probably should not flash it?
Some do say it can be flashed with non-safestrap(twrp) but we need to flash our carriers kernel after.
How can we make a back up of it (the kernel that I have on my phone right now) and make it flashable from twrp?
Thanks again!!
Click to expand...
Click to collapse
Also you can backup your stock rom with twrp and flash what ever you want then restore the stock back up after to go back

Categories

Resources