Hi
Ever since I flashed a kitkat rom whether its TW or AOSP im having problems. I never had problems with jelly bean.
With Touchwiz I have the issue when rebooting, sometimes I do not get data and when I try to activate data i get a message "insert sim card" after a few reboots or now "hot reboot" i get the data back.
With AOSP which i tried recently, I have a problem when rebooting I cannot type the lockscreen code! I need a lock screen code for exchange emails.
Could it be the boot loader that is causing issues? I tried flashing official roms but does the one file i flash update the boot loader? Im not sure if I have updated it.
Anyone else similar?
I had problems with reboots when i had wrong baseband. What you can do is:
- Flash Stock Rom (TW)
- Dial *#1234# and attach what appears here.
Joku1981 said:
I had problems with reboots when i had wrong baseband. What you can do is:
- Flash Stock Rom (TW)
- Dial *#1234# and attach what appears here.
Click to expand...
Click to collapse
My baseband says I9505XXUFNB9
Bootloader says I19505XXUFNC4 (root checker app)
I got the "no sim error" when I flashed back to Echoe rom for my i9505, all I did was reflash the rom (with no changes) and bingo worked as soon as the screen came on.
olster said:
My baseband says I9505XXUFNB9
Bootloader says I19505XXUFNC4 (root checker app)
Click to expand...
Click to collapse
Pls write here exactly all what appears when u dial *#1234#
Related
I just Odin flashed "N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME. tar"
Kitkat 4.4.2 stock official rom (I checked the md5 and it's perfect)
It flashed without any errors at all but I have no signal, when I go to setup>General>About
the baseband displays "unknown". The odin log file shows no errors at all, it finished properly.
When I go to Setting>Connections>more networks and I click it, a box pops up saying
"insert SIM card to access connections".
Instead of a signal bar in the status bar I see a circle with a / through it.
My phone is a T-mobile N900T ? USA version.
Anyone have any ideas?
Thanks in advance.
Misterjunky said:
I just Odin flashed "N900TUVUCNB4_N900TTMBCNB4_N900TUVUCNB4_HOME. tar"
Kitkat 4.4.2 stock official rom (I checked the md5 and it's perfect)
It flashed without any errors at all but I have no signal, when I go to setup>General>About
the baseband displays "unknown". The odin log file shows no errors at all, it finished properly.
When I go to Setting>Connections>more networks and I click it, a box pops up saying
"insert SIM card to access connections".
Instead of a signal bar in the status bar I see a circle with a / through it.
My phone is a T-mobile N900T ? USA version.
Anyone have any ideas?
Thanks in advance.
Click to expand...
Click to collapse
If you are rooted try this http://forum.xda-developers.com/showthread.php?t=2507403
Do you also have an EFS backup you can try to restore ?
if you have a twrp efs backup, you can fix it with following guide: use this guide at your own risk: http://forum.xda-developers.com/showthread.php?p=51149748
When I upgrade my Samsung N9005 (European version) to Android 4.4, it does not detect any of my sim cards. I have tried this on three phones I have and am now sure there is a porblem with the firmware not my sim card. I am on China Unicom. I have also tried to insert a sim from a different country, it does not even ask for the pin since to it nothing is inserted. I have tried different region firmwares from HongKong, United Kingdom and Unknown. Please help.
Anyone?
How do I make my posts popular. I always ask questions on this forum and never receive answers. Yet there are 52k people online.
Be patient. You are not special that you should get immediate answers on your topics.
Thought about possible hardware failure? It could go under warranty as well.
Someguyfromhell said:
Be patient. You are not special that you should get immediate answers on your topics.
Thought about possible hardware failure? It could go under warranty as well.
Click to expand...
Click to collapse
Its not a hardware failure. I have three phones which I got after exchanging so this is six in total that have this issue. I also cannot downgrade back to 4.3 which is what I would prefer as for now.
What version of 4.4.2 you have? I need the build number.
I would recommend reflashing firmware, might eliminate those bugs.
Someguyfromhell said:
What version of 4.4.2 you have? I need the build number.
I would recommend reflashing firmware, might eliminate those bugs.
Click to expand...
Click to collapse
I have tried 4.4.2 N9005XXUEND3_N9005OXAEND1_BTU and UK firmware N9005XXUEND3-N9005OXAEND1.
Just to add some detail, my phose Baseband is unknown and when I try to check the IMEI I cannot since it interpretes it as a phone call "Mobile Network not available"
Look around the forum, there are solutions for that. Apparently something went wrong when you updated firmware.
Sent from my SM-N9005 using Tapatalk
brokesergey said:
Just to add some detail, my phose Baseband is unknown and when I try to check the IMEI I cannot since it interpretes it as a phone call "Mobile Network not available"
Click to expand...
Click to collapse
Try re-flashing the entire firmware, or extract only modem files and flash it manually. See the post here: http://forum.xda-developers.com/showpost.php?p=52948152&postcount=13
vndnguyen said:
Try re-flashing the entire firmware, or extract only modem files and flash it manually. See the post here: http://forum.xda-developers.com/showpost.php?p=52948152&postcount=13
Click to expand...
Click to collapse
I'm experiencing the same issue. Flashed a new Temasek CM11 nightly and after booting into the rom for the first time no PIN unlock dialogue appeared. The phone is stuck at "searching for service". My IMEI number is still there and both SIM cards I have tried work perfectly in my iPhone.
I'm still on JB 4.3 bootloader with CMW recovery 6.0.4.5 and baseband is N9005XXUBMI6. Is it possible something got messed up when flashing latest CM? Perhaps baseband/modem firmware outdated?
I'm downloading N9905XXUEND3 and will flash back completely to stock. Will report back here later.
AO7 said:
I'm experiencing the same issue. Flashed a new Temasek CM11 nightly and after booting into the rom for the first time no PIN unlock dialogue appeared. The phone is stuck at "searching for service". My IMEI number is still there and both SIM cards I have tried work perfectly in my iPhone.
I'm still on JB 4.3 bootloader with CMW recovery 6.0.4.5 and baseband is N9005XXUBMI6. Is it possible something got messed up when flashing latest CM? Perhaps baseband/modem firmware outdated?
I'm downloading N9905XXUEND3 and will flash back completely to stock. Will report back here later.
Click to expand...
Click to collapse
Sorry I've never tried CM so I'm not sure what happens.
Please feedback.
vndnguyen said:
Sorry I've never tried CM so I'm not sure what happens.
Please feedback.
Click to expand...
Click to collapse
I have managed to solve the problem.
1. First back up EFS and FSG in case you haven't done that yet. On the N9005 your IMEI information is stored in FSG so do not use any tools that only backup the EFS without the FSG. For tools check here: http://forum.xda-developers.com/showthread.php?t=2611903
2. Flash stock image for N9005. I was still on JB 4.3 with the unlocked bootloader so I flashed JB 4.3 again, didn't bother with KK 4.4 which will lock the bootloader after flashing.
3. Booting back into stock and the SIM PIN entry menu appeared straight away.
4. Flash CWM recovery appropriate to your bootloader 4.3 or 4.4
5. Flash CM
6. SIM PIN entry and cellular works perfectly again
conclusion:
I'm not sure why this happened. Downgrading to a previous CM build did not solve the issue. So I'm reluctant to blame CM itself. Perhaps the recovery was the culprit. Somewhere something must have been corrupted during a flash. Luckily nothing that couldn't be fixed by flashing stock.
Hi,
I just flashed my Galaxy S3 GT-I9300 from Android 4.3 to 4.4 with ParanoidAndroi ROM.
Eveyrthing work just fine except one thing : I can't unlock my SIM !
When I start the pone, a prompt ask me the PIN, and when I submit it, the wheel just turns, nothing happens.
I can access the phone when I set plane mode then reboot, but I have no mobile network (no SMS / Phone call etc.) :/
I tried to disable PIN security in the build.prop file by setting keyguard.no_require_sim=true, doesn't change anything.
I have this SIM for 3 years now, the phone is definitly not sim locked for this operator.
Anyone has an idea?
You flashed from 4.3 stock, or 4.3 custom??
MIKEYG86 said:
You flashed from 4.3 stock, or 4.3 custom??
Click to expand...
Click to collapse
4.3 stock
My baseband is I9300XXUGNA7
Try:
1. Reflashing Stock and see if the SIM is still working without unlock.
2. If yes; don't flash PA.
3. if No, that means it was locked, you need to get in contact with your service provider in order to unlock your phone; or buy a code off eBay.
Hi everyone I've been lurking around the forums the past week trying to find a fix to my problem and I just find anything that will fix it. I'm hoping one of you that has a bit more experience with this can help me.
OK so here's my problem
My Samsung galaxy s4 i337m was rooted but I wanted to unroot to update cause I'm new to it and never used my root for anything
I looked around and downloaded a stock ROM and flashed it in with oden and I had no WiFi no sound couldn't make calls no videos so I tried flashing another custom ROM and it let's me use data and text but no calls no video no sound I usually only get 2-3 hours of down time here to look for a fix and I have been all this week but can't seem to work the problem out
Does anyone know how to fix this so I can call my kids again I'm not gonna be homeor anywhere close to a place to get a new phone for another month
And to sweeten the deal I'll send 25$ PayPal to the person that can get this fixed for me
Thanks for your time
I'm living in Canada and my provider is telus
stephen1617 said:
I'm living in Canada and my provider is telus
Click to expand...
Click to collapse
1. Download the latest firmware for your device: HERE.
2. Flash it via ODIN. Reboot your device and take a look if you have wifi or sound. Reflash the same firmware that you downloaded in the step 1 if not. Remember that dialing *#1234# have to appear this for fix the calling/wifi:
AP: I337MVLUFNI2
CP: I337MVLUFNI2
CSC: I337MOYAFNI2
3. Good luck :highfive:
Joku1981 said:
1. Download the latest firmware for your device: 3 HERE
2. Flash it via ODIN. Reboot your device and take a look if you have wifi or sound. Reflash the same firmware that you downloaded in the step 1 if not. Remember that dialing *#1234# have to appear this for fix the calling/wifi:
AP: I337MVLUFNI2
CP: I337MVLUFNI2
CSC: I337MOYAFNI2
3. Good luck :highfive:
Click to expand...
Click to collapse
Thanks for the reply I'll try it when I get off of work
So let me get this right I DL it flash it check it if its good with sound and WiFi I flash it again?
What about if it isn't good with WiFi or sound any thing else I can try
Also when I dial that number now it pops up connection problem or invalid mmi if that makes a difference
stephen1617 said:
Thanks for the reply I'll try it when I get off of work
So let me get this right I DL it flash it check it if its good with sound and WiFi I flash it again?
What about if it isn't good with WiFi or sound any thing else I can try
Also when I dial that number now it pops up connection problem or invalid mmi if that makes a difference
Click to expand...
Click to collapse
1. It's the correct firmware for your device and the latest. Yes. Problem of sound/wifi are related to wrong baseband normally. Reflashing it 2 times solve the problem.
2. We will try other options.
3. You have to install STOCK ROM for dial *#1234# first.
Joku1981 said:
1. It's the correct firmware for your device and the latest. Yes. Problem of sound/wifi are related to wrong baseband normally. Reflashing it 2 times solve the problem.
2. We will try other options.
3. You have to install STOCK ROM for dial *#1234# first.
Click to expand...
Click to collapse
You my friend are a life saver I can't thank you enough this worked and I was able to call my son tonight :laugh:
Now it's time to hold my end of the deal pm me you PayPal address I'll send you 25$ for your help
never mind i seen your donate button after
sending now
Joku1981 said:
1. It's the correct firmware for your device and the latest. Yes. Problem of sound/wifi are related to wrong baseband normally. Reflashing it 2 times solve the problem.
2. We will try other options.
3. You have to install STOCK ROM for dial *#1234# first.
Click to expand...
Click to collapse
hey i noticed today my phone wont do mobile data even tho i have it enabled any idea how to fix this every thing else is fine just no mobile data
stephen1617 said:
hey i noticed today my phone wont do mobile data even tho i have it enabled any idea how to fix this every thing else is fine just no mobile data
Click to expand...
Click to collapse
Restart phone?
white7561 said:
Restart phone?
Click to expand...
Click to collapse
tried that tried factory resetting tried removing the sim i know its not hardware because it was working on the custom rom but not this stock one
stephen1617 said:
tried that tried factory resetting tried removing the sim i know its not hardware because it was working on the custom rom but not this stock one
Click to expand...
Click to collapse
check your APN settings you may need to reset them back to your carriers standard settings
stephen1617 said:
tried that tried factory resetting tried removing the sim i know its not hardware because it was working on the custom rom but not this stock one
Click to expand...
Click to collapse
1. Go to Settings - Connections (TAB) - More Networks - Mobile Networks - Access Point Names (APN).
2. Take a look: HERE or HERE.
3. Reboot your device when you finish of add that settings.
4. You will have the data back
I hope I am posting in the right section.
I have a Samsung Galaxy S4 (I9505) and it was crashing on the stock ROM so I flashed the Imperium LL Rom v11.0. The problem I am having is my phone reporting no network signal or "Out of service". But not always. After a reboot I usually have network signal. After locking and unlocking the phone I never have. The signal usually comes within a few minutes. When my phone is reporting "Out of service" I cannot make calls but I can still receive calls. And after the received call has terminated I can still not make calls. After a few minutes the network signal icon comes and I can make calls. Until I lock my phone because it gets lost everytime.
Some info:
1. I was on a rooted Stock 4.2.2 before I flashed the Imperium LL Rom.
2. The IMEI seems to have changed. I never took note of it before flashing, so it might have always been different but the IMEI reported by the phone is different from the IMEI on the sticker underneath the phone battery. I tried the Xposed IMEI changer but the problem still happens so this may be unrelated.
3. While searching I found it could be an invalid Modem driver. In the settings the Baseband version is I9505XXUBMEA so I tried flashing the driver for that version using ODIN. No change.
4. I tried via Recovery to flash Slim80 Kernel Cleaning Script v1.9 and then the Imperium Kernel v3.3 but no change.
I did a factory wipe before flashing the firmware.
Any help or suggestions please?
Thanks!
I have actually solved this. What I had tried before was flashing the modem with the same Baseband I had previously ie: I9505XXUBMEA thinking that there were specific versions which needed specific drivers. Upon reading more I found out that newer versions of the modem should be installed and that XX was a carrier code and the last 2 letters are how recent the driver is. So I tried the latest modem (XXUHOE2) I could find similar to the Imperium Build which is XXUHOJ2 and it seems to be working. My phone retains the network signal when put to sleep.
The fact the IMEI changed is weird and I don't know if it makes a difference. Maybe it was always like this..but it is strange that it is different to the one on the sticker. The format is correct because only the last 4 digits differ.
Anyway I hope this info helps someone with similar problems.
How can I mark the title for this as [Solved]? I can't find any way.