Database Users

[Q] cant get back to stock firm plz help warranty nearly expired

hi everyone i have an s4 mini but the cam isnt working i bought it with the CM 10 already on it
i tried getting it back to stock using odin but it always fail
i m using odin 1.85
stock firm I9195XXUBML4_I9195OXABML4_I9195XXUBML4_HOME.tar.md5
what am i doing wrong ?? plz help i still have 1 month or so in the warranty
when i put my s4 mini on download mode it displayes the following:
odin mode
product name : GT-I9190
current binary:custom
system status :custom
csb-config-lsb:0x30
write protection :enabled
and after odin fails it displayes : secure check fail :sbl2
the log odin is displaying
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUBML4_I9195OXABML4_I9195XXUBML4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

1. First of all u have a GT-I9190 no a GT-I9505.
2. Is normal that ODIN gives u error for the step 1
3. The unique u need is one firmware for ur GT-I9190
4. This correct thread for ur phone is: HERE

Joku1981 said:
1. First of all u have a GT-I9190 no a GT-I9505.
2. Is normal that ODIN gives u error for the step 1
3. The unique u need is one firmware for ur GT-I9190
4. This correct thread for ur phone is: HERE
Click to expand...
Click to collapse
thanks for the help
i m downloading the correct firmware but do i need a different odin version than the 1.85 ? if yes wich one do i need ?
best regards

fantomezone said:
thanks for the help
i m downloading the correct firmware but do i need a different odin version than the 1.85 ? if yes wich one do i need ?
best regards
Click to expand...
Click to collapse
No. But u can update ur Odin to 3.04, 3.07 or 3.09. Take a look in this forum if u want update it :highfive:

[Q] How to root after the latest update ?

Hi all,
I've just updated my Note3 SM-N9005 via kies to Build number N9005XXUDMK2 and now I can't flash root, It fails every time...
My version is N9005XXUDMJ7 and my build number is N9005XXUDMK2.
I don't know if it has something to do with it, but when I enter download node I see a gray line saying: "Write protection: Enabled".
Can anyone please tell me how can I gain root access again ?
I'm tring to flash this file: "CF-Auto-Root-hlte-hltexx-smn9005.tar.md5" with "Odin3 v3.09.exe"
which I found in this site: http://true-android.blogspot.co.il/2013/12/root-n9005xxudmk2-galaxy-note-3-sm.html

frliran said:
Hi all,
I've just updated my Note3 SM-N9005 via kies to Build number N9005XXUDMK2 and now I can't flash root, It fails every time...
My version is N9005XXUDMJ7 and my build number is N9005XXUDMK2.
I don't know if it has something to do with it, but when I enter download node I see a gray line saying: "Write protection: Enabled".
Can anyone please tell me how can I gain root access again ?
I'm tring to flash this file: "CF-Auto-Root-hlte-hltexx-smn9005.tar.md5" with "Odin3 v3.09.exe"
which I found in this site: http://true-android.blogspot.co.il/2013/12/root-n9005xxudmk2-galaxy-note-3-sm.html
Click to expand...
Click to collapse
Can you paste the Odin log after it fails?
Also you may have the new updated CF Root which has been adapted for KitKat and doesn't work with 4.3 anymore.

Here is the log from odin
radicalisto said:
Can you paste the Odin log after it fails?
Also you may have the new updated CF Root which has been adapted for KitKat and doesn't work with 4.3 anymore.
Click to expand...
Click to collapse
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I even tries using the same root file I did the first time I rooted my phone...

frliran said:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I even tries using the same root file I did the first time I rooted my phone...
Click to expand...
Click to collapse
Gave the same error using the original file you used from the first time? -- It is possible it doesn't like MK2, however it should work because I used it fine when I was on it.. Try re-downloading it again and trying again (I don't have it anymore, only the KK version )

Here is the log of the first file
radicalisto said:
Gave the same error using the original file you used from the first time? -- It is possible it doesn't like MK2, however it should work because I used it fine when I was on it.. Try re-downloading it again and trying again (I don't have it anymore, only the KK version )
Click to expand...
Click to collapse
The previous log was from the new file I downloaded today.
This is the log from "Odin3 v3.07" using the first file I rooted my phone with:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
PLEASE...Can you please help me to re-root my phone.
(And if you can, please send me a link to download root for the KitKat version so that I can re-root it when the update will rollout in my country.)

Just to double check -- you are flashing it via the PDA option correct? and you have unrar'd it so you can see the tar.md5 file ?

yes
radicalisto said:
Just to double check -- you are flashing it via the PDA option correct? and you have unrar'd it so you can see the tar.md5 file ?
Click to expand...
Click to collapse
Yes I am.
But in odin 3.9 there is AP and not PDA.
But I tried both in both odin versions: 3.7 and 3.9.
In odin 3.7 I am using PDA, and in odin 3.9 I am using AP.

Hmm I am stumped I'm afraid. Usually re-flashing it normally works. See if anyone else will chime in and know the answer.

)-;
radicalisto said:
Hmm I am stumped I'm afraid. Usually re-flashing it normally works. See if anyone else will chime in and know the answer.
Click to expand...
Click to collapse
Do you think doing "Wipe cache partition" can fix it ? I don't realy knkow what it means...
Can you please send me a download link for rooting after updating to KitKat ? So I could use it when the update rolls out in my country

frliran said:
Do you think doing "Wipe cache partition" can fix it ? I don't realy knkow what it means...
Can you please send me a download link for rooting after updating to KitKat ? So I could use it when the update rolls out in my country
Click to expand...
Click to collapse
When it rolls out it may be a different version of KK than is currently compatible with CR Root. Better waiting til it comes out then seeing what is available.
**[Side Note... If you want KK now you can flash the Official XEO version depending on your Model (IF Hong Kong then it won't work) - and you can root on that without issue after flashing, but you cannot go bac to 4.3 again]**

hmmm
radicalisto said:
When it rolls out it may be a different version of KK than is currently compatible with CR Root. Better waiting til it comes out then seeing what is available.
**[Side Note... If you want KK now you can flash the Official XEO version depending on your Model (IF Hong Kong then it won't work) - and you can root on that without issue after flashing, but you cannot go bac to 4.3 again]**
Click to expand...
Click to collapse
I prefer to wait till an official KK will roll out and update via kies.
Can you please tell me if I do "Wipe cache partition" will fix the root failure probloem ?
I don't realy know what this wipe does...

Solved it (-:
frliran said:
I prefer to wait till an official KK will roll out and update via kies.
Can you please tell me if I do "Wipe cache partition" will fix the root failure probloem ?
I don't realy know what this wipe does...
Click to expand...
Click to collapse
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem

It's always something so simple, Not turned activation lock on myself so never had an issue with it. Glad you got sorted thouugh.

Thank you very much for your help
radicalisto said:
It's always something so simple, Not turned activation lock on myself so never had an issue with it. Glad you got sorted thouugh.
Click to expand...
Click to collapse
Yes (-:
Thanl you very much for your help and consideration

[HELP] Error Flash Stock Rom 4.2.2

i have make downgrade form 4.4.2 to 4.2.2 i9500
and it's working fine
but i need flash this rom [ I9500XXUBMG9_I9500OJVBMG9_LYS.zip ]
it's show massage on phone
SW REV Invalid Magic Strings
and on odin
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUBMG9_I9500OJVBMG9_I9500XXUBMG9_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
note [ i check icon for knox on phone it's removed after downgrade ]
i use this rom for downgrade [ XFE-I9500XXUBMH1-20130927115211.zip ]

same problem with me.. any help guys?

EgyMan said:
i have make downgrade form 4.4.2 to 4.2.2 i9500
and it's working fine
but i need flash this rom [ I9500XXUBMG9_I9500OJVBMG9_LYS.zip ]
it's show massage on phone
SW REV Invalid Magic Strings
and on odin
Code:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUBMG9_I9500OJVBMG9_I9500XXUBMG9_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
note [ i check icon for knox on phone it's removed after downgrade ]
i use this rom for downgrade [ XFE-I9500XXUBMH1-20130927115211.zip ]
Click to expand...
Click to collapse
i have the same case my phone is hang up on logo and cant flash with any firmware its i9500

EgyMan said:
i have make downgrade form 4.4.2 to 4.2.2 i9500
and it's working fine
but i need flash this rom [ I9500XXUBMG9_I9500OJVBMG9_LYS.zip ]
it's show massage on phone
SW REV Invalid Magic Strings
and on odin
note [ i check icon for knox on phone it's removed after downgrade ]
i use this rom for downgrade [ XFE-I9500XXUBMH1-20130927115211.zip ]
Click to expand...
Click to collapse
vbfather said:
same problem with me.. any help guys?
Click to expand...
Click to collapse
alialjorany said:
i have the same case my phone is hang up on logo and cant flash with any firmware its i9500
Click to expand...
Click to collapse
Hi mates ,
If you have a 4.4.2 bootloader you can not flash ( odin) any firmware with a bootloader older that that. You can only flash (odin) firmware with the same bootloader or newer. This apply to stock firmware not custom firmwares as they do not have bootloaders
@alialjorany can you get into download mode? flash firmware again

Finally some hope!
MAX 404 said:
Hi mates ,
If you have a 4.4.2 bootloader you can not flash ( odin) any firmware with a bootloader older that that. You can only flash (odin) firmware with the same bootloader or newer. This apply to stock firmware not custom firmwares as they do not have bootloaders
@alialjorany can you get into download mode? flash firmware again
Click to expand...
Click to collapse
Sounds like you know what you're talking about, so could you clarify how and what files we would need to flash firmware via download mode instead of Odin.
Thanks!

fperezlopez said:
Sounds like you know what you're talking about, so could you clarify how and what files we would need to flash firmware via download mode instead of Odin.
Thanks!
Click to expand...
Click to collapse
look at google page for more infotmation check this:

fperezlopez said:
Sounds like you know what you're talking about, so could you clarify how and what files we would need to flash firmware via download mode instead of Odin.
Thanks!
Click to expand...
Click to collapse
Hi
You can only flash custom rom with custom recoveries , stock firmware only with odin

can i downgrade bootloader to 4.2.2?

vbfather said:
can i downgrade bootloader to 4.2.2?
Click to expand...
Click to collapse
Hi,
No you can not , Odin will not let you flash an older bootloader than the one you have

vbfather said:
can i downgrade bootloader to 4.2.2?
Click to expand...
Click to collapse
Never try doing that again or else you shall have a $450 brick :/
If youre on 4.3, flash 4.3 or higher
If youre on 4.4.2 flash 4.4.2 or higher
If youre on 4.2.2 flash 4.3 or 4.4.2 but remember there is no way back..
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.

thnx guys, i just downgrade my 4.4.2 i9500 to 4.2.2 using this file "I9500XXUBMH1_I9500OJVBMH2_I9500XXUBMG9_HOME.tar.md5"
but i failed to flash it with other 4.2.2 versions, and i later known that its because "I9500XXUBMH1" has same bootloader of 4.4.2. so any idea?
here in turkey we have problem with repair imei at 4.4.2
thanks in advance

[Help] My Phone won't boot (Samsung Galaxy S4)

Hi guys, i been searching for long time to resolve my issue and nothing found i think you guys could help me.
The issue is
My phone was rooted - Samsung Galaxy S4 - GT-I9505
And then i unrooted, but nothing to do with this, it was all oK..
After that i tried to upgrade the firmware from sammobile something like that..
I downloaded the new firmware I9505XXUGNG8_I9505MAXGNG1_I9505XXUGNG8_HOME.tar for my phone
And in the end of the line using Odin i got FAILED red box.. And since that i can't boot my phone stuck at Odin Mode: Firmware upgrade encountered an issue. Please select recovery mode in Kies & Try again. And up with small text says: Odin Mode, PRODUCT NAME: GT-19505, CURRENT BINARY: costum, SYSTEM STATUS: costum, KNOX KERNEL LOCK: 0x0, KNOX WARRANTY VOID: 0x1, CS0-CONFIG-LS8: 0x30, WRITE PROTECTION: enable, eMMc BURST MODE: enable
i tried with Kies but i can't connect , because i think after i unrooted, i reset my phone so USB debugging is not checked. I think for that. So i'm trying to install new firmwares with Odin and is not working i always get fail message red box, i tried all versions.
Does anyone know what to do please.
i Appreciate it.
Thanks.

GoodMan14 said:
Hi guys, i been searching for long time to resolve my issue and nothing found i think you guys could help me.
The issue is
My phone was rooted - Samsung Galaxy S4 - GT-I9505
And then i unrooted, but nothing to do with this, it was all oK..
After that i tried to upgrade the firmware from sammobile something like that..
I downloaded the new firmware I9505XXUGNG8_I9505MAXGNG1_I9505XXUGNG8_HOME.tar for my phone
And in the end of the line using Odin i got FAILED red box.. And since that i can't boot my phone stuck at Odin Mode: Firmware upgrade encountered an issue. Please select recovery mode in Kies & Try again. And up with small text says: Odin Mode, PRODUCT NAME: GT-19505, CURRENT BINARY: costum, SYSTEM STATUS: costum, KNOX KERNEL LOCK: 0x0, KNOX WARRANTY VOID: 0x1, CS0-CONFIG-LS8: 0x30, WRITE PROTECTION: enable, eMMc BURST MODE: enable
i tried with Kies but i can't connect , because i think after i unrooted, i reset my phone so USB debugging is not checked. I think for that. So i'm trying to install new firmwares with Odin and is not working i always get fail message red box, i tried all versions.
Does anyone know what to do please.
i Appreciate it.
Thanks.
Click to expand...
Click to collapse
Hi mate ,
You have to flash an stock rom with odin , there is no other solution
Check this thread , i will give you in detail how to proceed
http://forum.xda-developers.com/showthread.php?t=2265477

MAX 404 said:
Hi mate ,
You have to flash an stock rom with odin , there is no other solution
Check this thread , i will give you in detail how to proceed
http://forum.xda-developers.com/showthread.php?t=2265477
Click to expand...
Click to collapse
That's what he's doing. It should be working.
It MIGHT be because you have non official firmware on it now and it's not accepting the flash back to stock. IF that's the case the solution is to uncheck auto reboot in Odin and run the install sequence twice in a row. That's worth a shot here, but I don't think it's the solution.
Do you still have a working custom recovery? If so you should still be able to flash a custom ROM. I might try flashing a custom TouchWiz rom then starting over.

Still fail !
ty for reply guys, ok i captured everything
this is image when i browse the file on AP / PDA odin freezed for few seconds...
And this is what i got:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505MBMGNG1_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!

GoodMan14 said:
ty for reply guys, ok i captured everything
this is image when i browse the file on AP / PDA odin freezed for few seconds...
And this is what i got:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNG8_I9505MBMGNG1_I9505XXUGNG8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Click to expand...
Click to collapse
Hi ,
This is from the post i gave you earlier
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
Check and see if it helps , did you try what Skipjacks said?

i di all
Hi, in this morning i tried again and passed.. finally
Thanks for helping.

GoodMan14 said:
Hi, in this morning i tried again and passed.. finally
Thanks for helping.
Click to expand...
Click to collapse
Great news mate
Sent from my Nexus 7 using XDA Premium 4 mobile app

Try flash stock firmware using odin

No Network After installing Cm lolipop

Hi ..
i Hv install Rom On Gt i 9505 Which I bought nd was Already Rooted b4 but a stock rom Was install i dnt rmember which one but i think this was installed I9505XXUFNB8 ... My mistake i didnt backup that Rom and Installed CM 12.1 lolipop 5.0.1 after that m having no GSm network ..
I tried To Install Other ROms too But its Not Installing Now I tried to find out I9505XXUFNB8 Stock Rom to Install Through Odin b ut its Giving Me Error too ...
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMJ5_I9505OXAEMJ5_I9505XXUEMJ5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:1/014> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:1/014> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:1/014> File analysis..
<ID:1/014> SetupConnection..
<ID:0/004> SetupConnection..
<ID:1/014> Initialzation..
<ID:1/014> Get PIT for mapping..
<ID:1/014> Firmware update start..
<ID:1/014> SingleDownload.
<ID:1/014> sbl2.mbn
<ID:1/014> NAND Write Start!!
<ID:1/014> FAIL! (Auth)
<ID:1/014>
<ID:1/014> Complete(Write) operation failed.
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 2)
this Is log i dint know What To do ....linked My Any rom Working on My Gt i 9505 ... Sprint_SPH-L720_16GB is another Name i think which i saw after CM 12.1

Admin , developer , mods will u please consider my post ???
I have asked same question in another thread few days ago and was ignored ...and now I m in right section but having same response ..

Ay4z said:
Admin , developer , mods will u please consider my post ???
I have asked same question in another thread few days ago and was ignored ...and now I m in right section but having same response ..
Click to expand...
Click to collapse
No one is ignoring your post. This is not a helpdesk so sometimes it will take time for someone to anwser.
Boot into download mode. What does it say your model is?

Make sure the latest drivers are installed and any instances of Kies are not running in the background.
EDIT: From your case it looks like yours is a Sprint Galaxy S4 which has been modified to look like a i9505. In that case try to flash firmware specific to your device.

TheAwesomeBit said:
Make sure the latest drivers are installed and any instances of Kies are not running in the background.
EDIT: From your case it looks like yours is a Sprint Galaxy S4 which has been modified to look like a i9505. In that case try to flash firmware specific to your device.
Click to expand...
Click to collapse
Its sph-l720 and drivers are install but it says fails
Plz share any ROM which can help me to bring it back to normal

Pick one.