OTA update with no recovery - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

so i have an s4 that had 4.3...well it has an unlocked bootloader and recently i lost the stock recovery and no custom recovery was on there. so did the 4.4 ota update like a genius and now the phone is stuck in odin download mode. cant get it to boot cant get anywhere. im in the process of downloading the stock 4.4 firmware and i downloaded a custom rom and custom recovery. i didnt know where to go from here. would it be ok to flash the stock firmware with odin? or could i just try a custom recovery and custom rom in odin?? looking for some serious help. thanks in advanced

Do you have an i337, because if you do the bootloader is not unlocked. You're going to have to flash the stock firmware in Odin
Sent from my Nexus 5 using XDA Free mobile app

jd1639 said:
Do you have an i337, because if you do the bootloader is not unlocked. You're going to have to flash the stock firmware in Odin
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
it is an i337. when i turn it on i get the unlocked lock with the samsung logo. i thought that was the bootloader.. im going totry to flash stock with odin now.

so that worked.. its booting up now. just to be certain i cannot flash custom recovery in odin on this right? and ill worry about the sim error at a later time.. already replaced the part yet i still get an error

The only working recovery for your phone now is safestrap
Sent from my GT-I9505 using Tapatalk

tadcrazio said:
so that worked.. its booting up now. just to be certain i cannot flash custom recovery in odin on this right? and ill worry about the sim error at a later time.. already replaced the part yet i still get an error
Click to expand...
Click to collapse
You're screwing up because you haven't read about the things you are trying to do. If you want to learn and do things correctly, I suggest reading the pinned threads in the general and q&a sections paying close attention to the information that is specifically about your model and firmware version. The things you are trying to do and the questions you are asking have been answered many times over in those threads.

tadcrazio said:
so i have an s4 that had 4.3...well it has an unlocked bootloader and recently i lost the stock recovery and no custom recovery was on there. so did the 4.4 ota update like a genius and now the phone is stuck in odin download mode. cant get it to boot cant get anywhere. im in the process of downloading the stock 4.4 firmware and i downloaded a custom rom and custom recovery. i didnt know where to go from here. would it be ok to flash the stock firmware with odin? or could i just try a custom recovery and custom rom in odin?? looking for some serious help. thanks in advanced
Click to expand...
Click to collapse
I went through the same situation and previous post is the right suggestion go to the pin general.
This is what I did
http://forum.xda-developers.com/showthread.php?p=52289782
You need to flash full nb1 to regain stock.
Once you are in nb1 you can choose to stay stock or downgrade to mk2 to root and install safestrap.
From there you can install any Tw rom not AOSP YOU CAN NOT FLASH CUSTOM ROMS.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

Related

[Q] return to stock recovery?

I would like to update to mf3 but after doing the ota update it reboots to recovery but I now have twrp instead of the required stock recovery...
After doing a lot of searching the only solution I found was to flash the official firmware with odin, but I'm assuming I will have to do a factory reset after this?
Is it possible to replace twrp with the stock recovery without having to do a factory reset or is there another way to get the mf3 update with twrp? (I'd rather not have to re-install all my apps and settings)
I hope my questions make sense its late and I'm tired.
badboyz said:
I would like to update to mf3 but after doing the ota update it reboots to recovery but I now have twrp instead of the required stock recovery...
After doing a lot of searching the only solution I found was to flash the official firmware with odin, but I'm assuming I will have to do a factory reset after this?
Is it possible to replace twrp with the stock recovery without having to do a factory reset or is there another way to get the mf3 update with twrp? (I'd rather not have to re-install all my apps and settings)
I hope my questions make sense its late and I'm tired.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=42253396#post42253396
There is always a risk of screwing something up...so read the thread, follow the directions, and decide if you want to take the risk..it's your decision.
Why not just flash a sweet custom rom like omega v9.0? That's the best thing about a custom recovery. It makes it easy to back up your current content and then try out a wide variety of mods and roms.
It's kinda counter productive to flash a stock recovery when you are trying to mod or customize your phone.
Odin is the cats butthole when trying to return to stock. Also, read the poop out of these threads... somebody has done what you want to do already so most things can be resolved with the solutions others have presented.
Bigbabyjesus said:
Why not just flash a sweet custom rom like omega v9.0? That's the best thing about a custom recovery. It makes it easy to back up your current content and then try out a wide variety of mods and roms.
It's kinda counter productive to flash a stock recovery when you are trying to mod or customize your phone.
Odin is the cats butthole when trying to return to stock. Also, read the poop out of these threads... somebody has done what you want to do already so most things can be resolved with the solutions others have presented.
Click to expand...
Click to collapse
The OP said he wants to update to MF3. I can't figure out why anyone would willingly do so either, but it is his decision. Personally I would also just flash one of the MF3 ROMs or International updated ROMs and still have the ability to use custom recovery with the benefits (I don't really think there are any) of MF3.
scott14719 said:
http://forum.xda-developers.com/showthread.php?p=42253396#post42253396
There is always a risk of screwing something up...so read the thread, follow the directions, and decide if you want to take the risk..it's your decision.
Click to expand...
Click to collapse
This should work. When you type the command make sure that the block number ( mmcblk0p21) is correct. Any mistake there and you will get a $600 paperweight
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
I read there is a root method for the MF3 OTA update in general section
Sent from my SAMSUNG-SGH-I337 using xda premium
jball said:
I read there is a root method for the MF3 OTA update in general section
Sent from my SAMSUNG-SGH-I337 using xda premium
Click to expand...
Click to collapse
This is correct, but it has nothing to do with the OP's request.
I read this hole page and u quoted the op wanted to update to mf3 so I just reassured the op that there is a root method for it .I do apologize to the op
Sent from my SAMSUNG-SGH-I337 using xda premium
Thanks for all the replies.
I wanted to update to mf3 because isn't it a newer modem? I was waiting until root was possible which now there is a method for mf3.
Sent from my Samsung S4
AT&T Message - Not Authorized Software found
rushi.1986 said:
This should work. When you type the command make sure that the block number ( mmcblk0p21) is correct. Any mistake there and you will get a $600 paperweight
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
Click to expand...
Click to collapse
thanks god did not turn my cell into a $600 paperweight :laugh: ... the process worked, but, when I try to do a factory recovery a sign from ATT says, in the top:
Secure Fail: Kernel
and a yellow exclamation with the following message: "System software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nearest AT&T store for help."
has anyone seen this?
badboyz said:
I would like to update to mf3 but after doing the ota update it reboots to recovery but I now have twrp instead of the required stock recovery...
After doing a lot of searching the only solution I found was to flash the official firmware with odin, but I'm assuming I will have to do a factory reset after this?
Is it possible to replace twrp with the stock recovery without having to do a factory reset or is there another way to get the mf3 update with twrp? (I'd rather not have to re-install all my apps and settings)
I hope my questions make sense its late and I'm tired.
Click to expand...
Click to collapse
You can flash your recovery with fastboot command:
Code:
fastboot flash recovery /path/to/revocery.img
I ended up just flashing the modem it seemed to be the safest option
Sent from my Samsung S4
simone.mutti said:
You can flash your recovery with fastboot command:
Code:
fastboot flash recovery /path/to/revocery.img
Click to expand...
Click to collapse
Are you sure that will work with the AT&T S4?
scott14719 said:
Are you sure that will work with the AT&T S4?
Click to expand...
Click to collapse
I don't think so, pretty sure that the bootloader has to be unlocked to do that
Sent from my Samsung S4
badboyz said:
I don't think so, pretty sure that the bootloader has to be unlocked to do that
Sent from my Samsung S4
Click to expand...
Click to collapse
I'm confused, are you on stock mf3 and have twrp installed as your recovery?
jd1639 said:
I'm confused, are you on stock mf3 and have twrp installed as your recovery?
Click to expand...
Click to collapse
I was on mdl rooted with twrp recovery then flashed just the modem for mf3
Sent from my Samsung S4

Won't boot into custom recovery

Hey guys, this is my first post on this forum. I have been doing a lot of research about rooting my s4 (SGH-1337, i9505) on firmware 4.3, and after a long process of trying different methods, I finally found a method that works, using a chinese root program. When I use root checker, it says my device has been fully rooted. However, I am having trouble booting into custom recovery. I used rom manager to flash clockworkmod touch, and it says flash succeeded, but whenever I try to boot into recovery, it will only take me into the stock android recovery. I decided to try to flash CWM through Odin, but every time I try that it says flash failed. I am not sure what the issue is here, and I have tried almost all of the methods that I have found. Any help would greatly appreciated!
chucktheduck said:
Hey guys, this is my first post on this forum. I have been doing a lot of research about rooting my s4 (SGH-1337, i9505) on firmware 4.3, and after a long process of trying different methods, I finally found a method that works, using a chinese root program. When I use root checker, it says my device has been fully rooted. However, I am having trouble booting into custom recovery. I used rom manager to flash clockworkmod touch, and it says flash succeeded, but whenever I try to boot into recovery, it will only take me into the stock android recovery. I decided to try to flash CWM through Odin, but every time I try that it says flash failed. I am not sure what the issue is here, and I have tried almost all of the methods that I have found. Any help would greatly appreciated!
Click to expand...
Click to collapse
The I337 and i9505 are not the same device. We cannot have a custom recovery on our 4.3 firmware with the I337 because of the locked bootloader. The i9505 is the international version, and has an unlocked bootloader since no carrier is enforcing a lock on it. So you can only have root and use root apps for now, and then use Safestrap when it is updated for flashing other Touchwiz or GPE 4.3 ROMs.
DeadlySin9 said:
The I337 and i9505 are not the same device. We cannot have a custom recovery on our 4.3 firmware with the I337 because of the locked bootloader. The i9505 is the international version, and has an unlocked bootloader since no carrier is enforcing a lock on it. So you can only have root and use root apps for now, and then use Safestrap when it is updated for flashing other Touchwiz or GPE 4.3 ROMs.
Click to expand...
Click to collapse
thank you so much. I guess I'll have to wait to be able to unlock the bootloader. Do you know of any methods now that can unlock it?
There is no method and may never be a method.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
graydiggy said:
There is no method and may never be a method.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I just found this post.
http://forum.xda-developers.com/showthread.php?p=42320391.
I should be able to at least install custom recovery using this method correct? Loki is sort of a workaround right?
chucktheduck said:
I just found this post.
http://forum.xda-developers.com/showthread.php?p=42320391.
I should be able to at least install custom recovery using this method correct? Loki is sort of a workaround right?
Click to expand...
Click to collapse
Not for MK2 4.3 on AT&T I337. If that's your device and firmware version, at this time, your bootloader is locked. Safestrap is 4.2.2 only. Patience.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

[Q] Bricked i337 -- URGENT

Hi everyone,
I am new to android mods and such and I may very well sound like an idiot. However, even though I know little to nothing of what I am talking about I am in dire need of help. I never did any heavy modifications like custom ROMS but I merely rooted it and installed some tweaks via the xda installer. After toying around with one of the tweaks I seemed to cause an annoying random reboot which would happen when I would sometimes go to unlock my phone. Fine, I could deal with a few reboots here and there. However, my phone recently got stuck on the AT&T loading emblem and stood in my pocket for 2 hours draining a lot of battery and has not been resolved since. I am unable to enter safe mode and I tried a few guides to flash it to stock but I honestly have NO IDEA what I am doing. I am aimlessly following guides here but there is so much variability therefore I feel as if I would have the most success with personalized help.
What do I do? Please use simplified terms along with (relatively) full steps. For example, if I were to flash something I would go into recovery mode with home + vol up button factory reset, and the AT&T logo would still be there, frozen.
Things I have tried but have probably done wrong:
Factory reset
Install custom ROM
All and ANY help is appreciated at this point, I am desperate.
Thank you,
Suprr
Also, my ultimate goal is to install http://forum.xda-developers.com/showthread.php?t=2520418 this mod, or at the very least get the stock ROM working so my phone is usable.
Suprr said:
Hi everyone,
I am new to android mods and such and I may very well sound like an idiot. However, even though I know little to nothing of what I am talking about I am in dire need of help. I never did any heavy modifications like custom ROMS but I merely rooted it and installed some tweaks via the xda installer. After toying around with one of the tweaks I seemed to cause an annoying random reboot which would happen when I would sometimes go to unlock my phone. Fine, I could deal with a few reboots here and there. However, my phone recently got stuck on the AT&T loading emblem and stood in my pocket for 2 hours draining a lot of battery and has not been resolved since. I am unable to enter safe mode and I tried a few guides to flash it to stock but I honestly have NO IDEA what I am doing. I am aimlessly following guides here but there is so much variability therefore I feel as if I would have the most success with personalized help.
What do I do? Please use simplified terms along with (relatively) full steps. For example, if I were to flash something I would go into recovery mode with home + vol up button factory reset, and the AT&T logo would still be there, frozen.
Things I have tried but have probably done wrong:
Factory reset
Install custom ROM
All and ANY help is appreciated at this point, I am desperate.
Thank you,
Suprr
Also, my ultimate goal is to install http://forum.xda-developers.com/showthread.php?t=2520418 this mod, or at the very least get the stock ROM working so my phone is usable.
Click to expand...
Click to collapse
I am assuming that you havent yet taken the OTA update to NB1 and your base is MK2. Or, do you have a MDB/MDL bootloader?
If MK2: You have to flash the full stock Mk2 firmware using odin. Download the "Full odin tar files" from the All things ATT thread
if MDB/MDL: Download the stock firmware from sammobile and flash using Odin.
jmjoyas said:
I am assuming that you havent yet taken the OTA update to NB1 and your base is MK2. Or, do you have a MDB/MDL bootloader?
If MK2: You have to flash the full stock Mk2 firmware using odin. Download the "Full odin tar files" from the All things ATT thread
if MDB/MDL: Download the stock firmware from sammobile and flash using Odin.
Click to expand...
Click to collapse
Are you talking about this? http://forum.xda-developers.com/showthread.php?t=2700726
Suprr said:
Are you talking about this? http://forum.xda-developers.com/showthread.php?t=2700726
Click to expand...
Click to collapse
No, wrong firmware to flash. Do you know what version you're currently on?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
No, wrong firmware to flash. Do you know what version you're currently on?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Jmjoyas told me to flash the full tar version and No I do not.
Suprr said:
Jmjoyas told me to flash the full tar version and No I do not.
Click to expand...
Click to collapse
He must have determined you are not on mdl/mdl firmware. Those firmwares would allow you to easily flash custom roms, nb1 is not as easy and limited to touch wiz based roms. Do you know if you had a custom recovery, twrp or cwm?
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
He must have determined you are not on mdl/mdl firmware. Those firmwares would allow you to easily flash custom roms, nb1 is not as easy and limited to touch wiz based roms. Do you know if you had a custom recovery, twrp or cwm?
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
To be frank, I have not a clue of what any of those are.
Suprr said:
To be frank, I have not a clue of what any of those are.
Click to expand...
Click to collapse
Alright, then the link you posted to the nb1 firmware should be ok for you to flash in Odin
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Alright, then the link you posted to the nb1 firmware should be ok for you to flash in Odin
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I am flashing it right now. Let's hope it works.
EDIT:
Flashed the full tar version for mk2 to no avail via Odin
Flashing the MK2 full tar file from here in Odin 1.85 says it was successful (green box) and when I went to restart the phone it was still stuck on the AT&T logo.
I flashed from this thread and this line:
http://forum.xda-developers.com/showthread.php?t=2700726
To return to factory stock MK2 flash the I337_MK2_Full_Odin tar
Click to expand...
Click to collapse
Suprr said:
Flashing the MK2 full tar file from here in Odin 1.85 says it was successful (green box) and when I went to restart the phone it was still stuck on the AT&T logo.
Click to expand...
Click to collapse
Boot into recovery and do a factory reset. That should get you past the bootloop
Ps, the first boot is going to take longer than normal. Give it a good 10 minutes
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Boot into recovery and do a factory reset. That should get you past the bootloop
Ps, the first boot is going to take longer than normal. Give it a good 10 minutes
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I love you. thank you so much.
jd1639 said:
Boot into recovery and do a factory reset. That should get you past the bootloop
Ps, the first boot is going to take longer than normal. Give it a good 10 minutes
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Now that my phone is operational, how would I go about installing this:
http://forum.xda-developers.com/showthread.php?t=2520418
Suprr said:
Now that my phone is operational, how would I go about installing this:
http://forum.xda-developers.com/showthread.php?t=2520418
Click to expand...
Click to collapse
You're on mk2 firmware now. You'll need to root it using safe root and then put safestrap on in order to flash that rom. Look in the general forum for index, all thing mk2 and nb1. There's a lot of info there so read it carefully
Sent from my Nexus 5 using XDA Free mobile app

[Q] Bootloader unlock Galaxy s4 sgh-i337 4.4.2 kitkat

I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
You CANNOT install CWM or TWRP. You will need to use SafeStrap recovery. Read up about it, as I have the older Loki bypass and don't need/use towelroot or safestrap.
With safestrap you are limited to flashing Touchwiz based roms. You can flash modems. You CANNOT flash kernels.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
RockRatt said:
You CANNOT install CWM or TWRP. You will need to use SafeStrap recovery. Read up about it, as I have the older Loki bypass and don't need/use towelroot or safestrap.
With safestrap you are limited to flashing Touchwiz based roms. You can flash modems. You CANNOT flash kernels.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337
Click to expand...
Click to collapse
So I can't use cyanogenmod, aosp, aopk, or pacman roms?
patstar5 said:
So I can't use cyanogenmod, aosp, aopk, or pacman roms?
Click to expand...
Click to collapse
There's one partially working Google Play edition rom, but otherwise, no.
This makes me truly sad. I was so looking forward to possibly flashing these ROMS and now...I have to get it my time machine and go backwards lol whenever I find the time to figure the downgrading thing out. Sounds to me like I'll be happier when I do find the time.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
There is no way going back to the older bootloader. The only way to go back would be to find an older S4 on eBay etc. with the old BL
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
All the post below are correct except being able to go back to firmware with an unlocked boot loader.. Install safestrap 3.72 and install recovery. You will get a Twrp recovery .. dont try flashing custom kernels ..It might flash but none of the setting such as overclock etc. will work .nor will you be on that kernel version afterwrds .. I guess the simple answer is no for cwm and aosp roms .. You will be only able too flash custom stock roms
Wifi issues with towelrooted gs4
First off this may not be the right place for this (first time poster), and if so, either please help me in finding the right forum or forgive my ignorance.
I rooted my galaxy s4 today, and I have found that when I am trying to use wifi I am unable to connect to some pages. Using chrome I am unable to load google.com, or google anything directly from the search bar. And the app imgur also doesn't load whilst on wifi, but if I switch to my cell network they load just fine. If I had unlimited data of course this would not be an issue, but that is not the case and therefore I come to this forum and hope that someone can help me out!
My s4 is an at&t i337. I would amazingly, greatly appreciate any help!
Much thanks in advance!
lost recovery with unlocked bootloader
Hello,
longtime flasher here, not as familiar with gs4.
My girl has a sgh-i337 that has been bootloader unlocked since day one. Been on TWRP and slim rom the whole time too.
I was wiping Cache, Dalvik Cache, and System prior to doing a rom update and TWRP glitched out while updating partition after the final wipe operation. Screen went black. Boots to download mode only.Will not boot rom (as system was wiped) but shows the samsung custom unlocked logo. When in download (odin) mode, I see product name: sgh-1337, Current Binary: Samsung Official, System Status: Custom CSB_OEM_LSB: 0x30 Write Protection: enable
universal android toolkit will not show device connected so Installation of custom recovery through toolkit fails. ADB will not show device connected. ODIN will show device connected, though.
To recover with odin, can I flash the I337UCUAMDL from sammobile and retain unlocked bootloader?
Thanks for any and all help.
What is the bootloader version you need to unlock? I have 4.2.2 Red ATT S4, Baseband Version : I337UCUAMF3 / BUILD: JDQ39 , if i was able to unlock how would i go about doing so? I was hoping i could do something with Loki if not? How does Loki work exactly as well?
Congrats, you just voided your warranty. It will be 0x1 instead of 0x0.
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
Just FYI for you guys hijacking the thread. It is usually better for you if you start your own thread. Most people skim these threads and may lose track of who they were helping or give bad info to you thinking they were replying to the original question. Or, just skip the thread if they don't think the OP tiltle interests them.
You will get more direct answers and quicker help if you do. Or try to post here--
http://forum.xda-developers.com/showthread.php?t=2320430
Just trying to get you faster and more accurate responses--:good:
How did you root S4?
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
How did you root your galaxy? I've been trying for two days now and no matter what I try to do it never works, fortunately I haven't bricked my phone but I feel like it's only a matter of time! I have a:
Samsung SGH-I337 for AT&T
4.4.2
Baseband Version: I337UCUFNI1
Kernel version: 3.4.0 Sep. 4th
Security software version v1.0 Release 2
th3doorMATT said:
How did you root your galaxy? I've been trying for two days now and no matter what I try to do it never works, fortunately I haven't bricked my phone but I feel like it's only a matter of time! I have a:
Samsung SGH-I337 for AT&T
4.4.2
Baseband Version: I337UCUFNI1
Kernel version: 3.4.0 Sep. 4th
Security software version v1.0 Release 2
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=55537351
Sent from my Nexus 5 using XDA Free mobile app
Using Odin 3.10
jd1639 said:
http://forum.xda-developers.com/showthread.php?p=55537351
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I've tried using other methods I'm not home to try this one out but every time I've connected my phone to Odin the COM Port has always been blue, I've never gotten it to be yellow like I've read in other guides. Any time I've tried to flash when it's blue it's failed. Any suggestions to get it yellow?
th3doorMATT said:
I've tried using other methods I'm not home to try this one out but every time I've connected my phone to Odin the COM Port has always been blue, I've never gotten it to be yellow like I've read in other guides. Any time I've tried to flash when it's blue it's failed. Any suggestions to get it yellow?
Click to expand...
Click to collapse
I believe in Odin 3.09 it is blue I've always used 1.85 where it's yellow. What tar file are you trying to flash?
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
jd1639 said:
I believe in Odin 3.09 it is blue I've always used 1.85 where it's yellow. What tar file are you trying to flash?
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
Click to expand...
Click to collapse
Hmmm. I still don't know why it fails but when I get home I'll have to let you know. I've deleted several after failing. I'm sure I can find them again and I think I still have a few as well so I'll let you know.
CF Auto Root and Towelroot
jd1639 said:
I believe in Odin 3.09 it is blue I've always used 1.85 where it's yellow. What tar file are you trying to flash?
Sent from my SAMSUNG-SGH-I957 using XDA Free mobile app
Click to expand...
Click to collapse
I've used both CF Auto Root, Towelroot, and Motochopper guides and none of them have worked.
The only file I have on my computer is: philz_touch_6.08.9-jflteatt.tar.md5 as one of the files I used but that didn't work. I actually had already downloaded the files from the article you had linked but I didn't get around to it yet, I'm going to try that method out in about 15-30mins and see what happens.
It worked!
jd1639 said:
http://forum.xda-developers.com/showthread.php?p=55537351
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Followed everything on that post and it worked! I'm rooted!
Though I'm not sure if you know about custom recoveries. I'm having issues with installing any of them and having it work. I am currently trying Safestrap and for some reason it won't install the recovery. It'll go through the process, but the state of the recovery won't change or anything.
I ultimately want to install CM11, but I'm really struggling to find a way that works!
unlocked bootloader.....
patstar5 said:
I rooted my galaxy s4 sgh-i337 runing android 4.4.2 today using towel root. It is an apk you install and will root any phone with 4.4.2 or lower. Well I tried flashing clockworkmod but when it restarts a message from at&t comes up saying that unauthorize software is trying to install on phone. So I think that means the bootloader is locked. How do I unlock it so I can flash CWM and perform a nandroid backup. Then I want to install custom roms. I know alot of people were looking for 4.4.2 root for s4 so might want to post another thread about towel root. towelroot .com
Click to expand...
Click to collapse
I still can't figure how to install the .apk file from kingroot..? How do you install the file to root it..?

[Q] *** Cant Find Info On MDL - Return To Stock Rooted ?!?

Currently, im rooted and running a custom rom and recovery on my ATT S4 with MDL. I'd like to return to stock rooted with the option to flash custom roms in the future. I know there have been a lot of changes recently with the various versions so I would also like to update to the safest and latest firmware possible(still be able to flash custom recovery and rom if I wanted to in the future).
So... What would be the best method to go about returning to an updated stock rooted state with the ability to flash roms and recoveries in the future?
I've been searching all morning but can't find much info on working with MDL. Can anyone point me in the direction or offer any assistance?
Any help would be much appreciated. Thanks in advance :good:
Go to sammobile.com for the mdl firmware. You'll download a zip, extract the .tar.md5 file from it and flash that in Odin. After you do that the phone will want to update to the newest firmware so look for the files to delete or flash a custom rom. It'll also wrote the device so backup first
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Go to sammobile.com for the mdl firmware. You'll download a zip, extract the .tar.md5 file from it and flash that in Odin. After you do that the phone will want to update to the newest firmware so look for the files to delete or flash a custom rom. It'll also wrote the device so backup first
Click to expand...
Click to collapse
Great. Thanks a bunch but I will no longer be rooted after flashing stock through ODIN correct? Should I use CASUAL from there to regain root and a custom recovery? Also, how would I update to a newer firmware after that? One that is "safe" or least problematic?
R.Suave said:
Great. Thanks a bunch but I will no longer be rooted after flashing stock through ODIN correct? Should I use CASUAL from there to regain root and a custom recovery? Also, how would I update to a newer firmware after that? One that is "safe" or least problematic?
Click to expand...
Click to collapse
You will lose root. CASUAL will still work and you'll still be able to use twrp or cwm. For newer firmware you're going to want to flash a custom rom based 4.4.4. You don't want to update your firmware as you won't be able to use twrp or cwm any more
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You will lose root. CASUAL will still work and you'll still be able to use twrp or cwm. For newer firmware you're going to want to flash a custom rom based 4.4.4. You don't want to update your firmware as you won't be able to use twrp or cwm any more
Click to expand...
Click to collapse
Perfect. Just the info I was looking for. Thanks! :good:

Categories

Resources