Related
Hi. Before the latest PA ROM update (may 13), I had my launcher working great at 720p 160 DPI. When I use these settings now, I get huge gaps between the rows. Help?
Thanks
vSTATERv said:
Hi. Before the latest PA ROM update (may 13), I had my launcher working great at 720p 160 DPI. When I use these settings now, I get huge gaps between the rows. Help?
Thanks
Click to expand...
Click to collapse
You might try the appropriate thread in development (albeit the 5th of May version) here or use Google+ to report this issue.
Other than that I can only recommend going back to a build that did work for you. You're using bleeding edge versions, so expect issues, bugs, and virtual nuts and bolts flying around at times.
Rhian said:
You might try the appropriate thread in development (albeit the 5th of May version) here or use Google+ to report this issue.
Other than that I can only recommend going back to a build that did work for you. You're using bleeding edge versions, so expect issues, bugs, and virtual nuts and bolts flying around at times.
Click to expand...
Click to collapse
Actually, neither the development thread nor Google+ is the appropriate venue. There exists a thread right here in the Q&A forum for AOSPA help, and the official bug tracker is at colormeparanoid.com.
Like you said, the OP should expect issues as he's flashed an alpha version of the rom. From the tenor of the post, it seems that it may have also been a dirty flash. If so, they a clean flash should be attempted prior to considering this a bug.
So where can I find a stable version of the ROM?
You have a few options on how to proceed. You can try a clean install to see if the problem was caused by dirty flashing, you can use a third party launcher such as Apex, or you could go back to an older release such as 3.15, http://tinyw.in/xQxR
The screenshot I attached shows the problem - gaps between the rows. Anyone else got this? I've flahsed newer PA versions with the same problem on each.
Since I rolled back to the 3.15 version it has come back to normal. But this isn't the solution ; I don't want to be stuck on an old version.
I have a rooted version of MDL that I am happy with, other than distortion on the headphones. I understand this was resolved on later ROMs, as described elsewhere. (Sorry, I can't add the link since this is my first post.) I am not feeling the need to flash a new ROM, maybe because I have never done it before. I am, however, very comfortable modifying the Linux file system on my phone. I am a professional software developer, and have years of experience with Unix. What are the recommendations for resolving this? Is there an APK that I can side load, or am I stuck flashing a new ROM. If the latter, which ROM is recommended? I also have the Xposed framework installed, if anyone is aware of a module that resolves this problem. I did search the forums, but did not locate any references. Feel free to point me at another thread that discusses a resolution to this problem.
Thanks,
Eric
Q&A for (Official) Dirty Unicorns V8.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Isn't there a way to set Omniswitch as default Recents?
Also, the Last app switcher button made systemui crash once and the phone became unresponsive (had to turn it off holding the power button). Otherwise, very good rom!
Ask the omni app Dev
So, i don't want to taint the main thread with my troubles.
D802 user here, austrian phone.
I'm trying to flash DU coming from PA and I do the following:
1 wipe all except for internal storage
2 flash 10a modem
3 Flash du 8.1
4 Flash gapps (optional)
5 Reboot to system.
Every time I try I get constant fc on systemui no matter what.
Any hints?
baseband for DU v8.1 update
Hi I am a lg g2 D802 user. Does this DU 8.1 update still need the JB baseband ?
Thx
Steim said:
Hi I am a lg g2 D802 user. Does this DU 8.1 update still need the JB baseband ?
Thx
Click to expand...
Click to collapse
AFAIK that's correct. This rom needs a jb modem.
Link Down
Hey, i have a problem with the download. The link dosen't work!! Please fix it, thanks!
installation for newcomer
sorry to ask,
I have D802 16GB coming with stock 4.4.2 D80220d-Eur-XX, b/b M8974A-AAAANAZM-1.0.190084
1. Can I do NOT wipe internal storage and just copy DU firmware and GApps there after factory reset?
2. Do I really need to flash older JB baseband?
3. In a case- Yes, shall I do it after I install DU f/w, before reboot, after? (which custom recovery to use?)
I flashed the latest ROM, flashed LGD802_10B_EUR_RADIO.zip. Rotation Works but can't change the sound volume. Any fix for this?
Btw, also tried LGD802_10A-232_RADIO.zip, still not able to change the Volume. I'm from Portugal, my phone is the D802.
Please help
EDIT : Volume changer just doesn't work with Google Play, Apollo. Works fine with youtube
I'm using the last build, came from Vanir, did a full wipe. I cannot apply any wallpaper to the lock screen, neither from my gallery, nor from the theme manager. It's always a black screen. Any way to fix it?
Yeah stop being lazy and look in the dirty tweaks
blaskewitts said:
Yeah stop being lazy and look in the dirty tweaks
Click to expand...
Click to collapse
I tried from Dirty Tweaks too. That's why I'm here asking as my last resource. I know how high are the probabilities to receive an stupid answer from a jerk.
Your right I'm a jerk because you can't search in dirty tweaks. It works just fine either look yourself, submit a bug report to jira or gtfo
Can i flash the 805 model with this rom???
Can't find where it says the model compatibility
Not officially supported
Sent from my Nexus 7 2013 using XDA Free mobile app
Hey, after flashing my orientation Sensor isnt working anymore :/ anybody got a clue? Ty!
Sent from my LG-D802 using XDA Free mobile app
With JB baseband on d803 the compass is broken. Any ideas?
Download Links
I cant download the d802 version on the site. Keep getting 404. Are the download links down by any chance? No mirrors?
The downloads site has 8.1 listed, is it stable?
I am relatively new to XDA but nonetheless have looked for an answer quite a bit before posting here. The Dirty Unicorns website has an 8.1 build that was released on 10/20/2014, I was wondering if that's a stable version.
EDIT:
The above is still open for an answer nonetheless, I went ahead and installed 8.1 (Clean Flash) it is super stable, no issues, anywhere except two. Before I talk about the issues: I checked nearly every setting changed them but still no crashes, no problems.
The two issues:
1) The battery life has turned into being unbearably bad. When the phone is in sleep, it is great but once I start using at around 50% brightness with normal applications like Dolphin browser, Facebook and all, I can actually see the battery drop every few minutes.
2) The music volume is somehow broken. Anything I play, from the music player, or YouTube, the sound is high for the first few seconds and then becomes extremely low. I tried other music players also but still,no luck. I tried changing every setting related to "Volume" and "Buttons" but no fix at all!
Any suggestions for these two? I tried so many Roms but now nearly all my Android devices use Dirty Unicorns. I just do not want to uninstall this ROM, so please help
Here is what fixed it for me.
joaolliveira said:
I flashed the latest ROM, flashed LGD802_10B_EUR_RADIO.zip. Rotation Works but can't change the sound volume. Any fix for this?
Btw, also tried LGD802_10A-232_RADIO.zip, still not able to change the Volume. I'm from Portugal, my phone is the D802.
Please help
EDIT : Volume changer just doesn't work with Google Play, Apollo. Works fine with youtube
Click to expand...
Click to collapse
I did not flash a new "Radio" or anything, I just clean flashed DU 8.1, then the volume did not work. I went to DSP Manager and enabled the equalizer (acoustic, but I'm sure anything will work) and the volume control started working.
Q&A for [ROM][CM10][CM10.1][CM-10.2][CM-11.0][GT-S7710] Samsung X Cover 2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][CM10][CM10.1][CM-10.2][CM-11.0][GT-S7710] Samsung X Cover 2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Kosh_swe said:
Cm10.2 is all BUT stable! ...
My hardkeys (back/menu/home) stopped working ONLY on flxo/Vanir firmwares, ive tried both cm10.2 (20140204_cm_10.2_skomer-ota-eng.flx, which is supposed to be "rock solid", i dont want nightlies since this phone is going to my gf so im after a stable firmware) but i've also tried latest nightly vanir 4.4 but that got the same bug in it!
...
Click to expand...
Click to collapse
@Kosh_swe, have you found a solution? I also failed to get the Vanir ROM to work and I'd consider the flox CM10.2 ROM. Your post suggest that my radio would be dead in flox, too.
---------- Post added at 12:35 PM ---------- Previous post was at 12:26 PM ----------
Matt64 said:
Hey guys,
I recently compiled flxo CM11.0 rom with STE OMX support (from TeamCanjica).
I've been testing it for a couple of weeks, for me everything seems ok (no reboots, camera working ...)
I didn't test bluetooth hand's free, but it's certainly still broken.
You can download this rom from my dropbox account :
xxx
I'm also trying to compile Ubuntu Touch for S7710, I'll let you know when the rom will be flashable.
Click to expand...
Click to collapse
@Matt64, could you provide a hands-on on how to do the compiling?
Never mind, fixed my radio issue. See http://forum.xda-developers.com/showpost.php?p=56293409&postcount=37
Testing radio issues
Hi to all,
I just tested radio issues on my phone. I was researching, why radio is not working.
Here are results, maybe it will help. Anyway, I have my GT-s7710 for testing and I can do some tests or catch some debug informations if needed.
It seems that problem why radio is not working is located in modem-supervisor process. In original firmware, this process is responsible for uploading firmware into dbx500 platform chip. But in CM, there is no such process.
I am not expert, but it seems to.
I tried to use old modem-supervisor process to make everything working.
Services line from original fw:
Code:
service modem-supervisor /system/bin/modem-supervisor -r -f /dev/dbx500_mloader_fw -i /sys/devices/platform/ab8500-i2c.0/chip_id -c monitor -t 0
but it needs to be changed because /sys/devices/platform/ab8500-i2c.0/chip_id changed to /sys/devices/platform/ab8505-i2c.0/chip_id
Problem is that firmware event for loading firmware is never generated and firmware is not uploaded.
I have some dumps and traces if you need them. Thank you for your work!
Lukas
loneraver said:
I tried it, and got none of the "known" issues. Give it a try. If you get any issues, you can always flash back to stock rom.
Click to expand...
Click to collapse
Your "tested" devices are just headphones, right?
The Problem is not the hearing part - the microphone signals are blocked...
if you have a real headset - please try with that one again and tell me
an idea
The 7580's phone hardware is almost identical to the 7710. The processor in the 7580-higher heights, but the hardware buttons and then there are all of the functions, but it has the 4.2.2 firmware, which allow moving to the SD card. Somehow it should possess to operate from 7710.
I'm Hungarian, sorry if the translation is wrong, happened with google.
Okay so I am having the same problem with HW buttons as many others before me...
http://forum.xda-developers.com/showpost.php?p=51234756&postcount=329
http://forum.xda-developers.com/showpost.php?p=51253847&postcount=333
http://forum.xda-developers.com/showpost.php?p=54973574&postcount=362
Click to expand...
Click to collapse
After clean 1st boot after the installation the buttons are working perfectly, but after reboot (2nd boot) they are not working properly. Only long presses are working (google search by long press of menu button, kill aplication by long press of back button, last apps by long press of home button).
So? There is no such responde on how to fix that..!
DaGrizzly said:
Your "tested" devices are just headphones, right?
The Problem is not the hearing part - the microphone signals are blocked...
Click to expand...
Click to collapse
In my cited post I refer to a previously made post where I listed the devices:
loneraver said:
I tested it with logitech ue9000 and samsung hs2000.
Click to expand...
Click to collapse
Both are real headsets with working mics.
Know it's OT but if it's true it's exiting:
Miui for our phone coming?
http://forum.xda-developers.com/showthread.php?p=58720490
Sent from my GT-S7710 using XDA Free mobile app
Sent from my GT-S7710 using XDA Free mobile app
Try other
this one is very very STABLE :
http://forum.xda-developers.com/showthread.php?t=2689010
XCover 2: BT hands free - Problem fixed yet?
Hey developers,
I was wandering if the BT problem has been fixed for Cyanogenmod Version 10.2 for XCover 2.
BT hands free. Connection/pairing works, but the audio path is broken.
Thanks a lot!
baseband wipe
I can't get Cyanogenmod 10.2 working. Everytime installation wipes my baseband.
When I install the Stock ROM SIM works again - but after flashing CM again also wipes baseband again.
My Installation-Tools:
Odin v3.07
CMW: 20140112_cwm-6.0.4.6_skomer_fixed.tar.md5
CM: 20140204_cm_10.2_skomer-ota-eng.flx.zip
Is there any chance to install the baseband (I think it's inside the modem.bin)?
No network available in Polish Play
I'm installing CM for my father in law on Samsung X Cover 2 and I'm facing problem with no available network.
I've tried CM 11 and CM 10.2 - both are running fast but both doesn't recognize any network operator.
CM11 has additional problem with hanging during shutdown.
I've found that Polish network Play has common problems with radio: like here
https://code.google.com/p/cyanogenmod4milestone/issues/detail?id=510.
But even I'm putting T-Mobile sim card then still phone doesn't recognize (phone is coming from Play but it is unlocked).
When I restored Play stock ROM then it works.
Could anybody help in this?
I cannot point link to logcat because new user limitation - pastebin URL part is rWttd9PH
sk_8x said:
I'm installing CM for my father in law on Samsung X Cover 2 and I'm facing problem with no available network.
I've tried CM 11 and CM 10.2 - both are running fast but both doesn't recognize any network operator.
CM11 has additional problem with hanging during shutdown.
I've found that Polish network Play has common problems with radio: like here
https://code.google.com/p/cyanogenmod4milestone/issues/detail?id=510.
But even I'm putting T-Mobile sim card then still phone doesn't recognize (phone is coming from Play but it is unlocked).
When I restored Play stock ROM then it works.
Could anybody help in this?
I cannot point link to logcat because new user limitation - pastebin URL part is rWttd9PH
Click to expand...
Click to collapse
Forget CM en try Vanir or MIUI these are more up2date. Also CM11 is alpa with camera bug:
First look at: http://forum.xda-developers.com/t/xcover-2
Vanir
Second, I use Vanir 4.4.4 daily. It has some bugs, but not some bugs that makes it unstable. Known issues:
Start/Stop navbar after every restart
Use this solution to fix connection errors after a fresh Flash: http://forum.xda-developers.com/showpost.php?p=60411469&postcount=612
Other small bugs:
2G/3G quick setting and normal settings dont work properly because of absence of LTE
Navigation Ring and immersive mode causes dead touch screen space
DSP manager doesn't work
After using Vanir 4.4.4 I never want to go back! It's that much faster, more free RAM en better battery performance. Because of the better RAM performance, you must kill apps more often else it will drain the battery quicker :silly:.
Best way to Flash with 4.4.4 is to first flash Clockworkmod through ODIN, then do the usual Full Wipe --> Wipe Cache --> Flash Rom --> Flash GAPPS. Here is a video of someone doing these things. P.S. in this video the process is speeded up also reboot can freeze the system (just remove battery after a couple of minutes)
Files
Vanir: https://drive.google.com/file/d/0B7agwkTbiz0pNHZMQlpudkR4NUU/view
GAPPS: https://mega.co.nz/#!kokjzJwT!eqmMam5r5N2kWvtmSMy4QnaHnxvoqhDtr_joSDU5anI
MIUI
Another option is MIUI (used on the the popular Chinese Xiaomo phones). Instead of the Vanir build, this build is still being maintained. But because it's based on Vanir it has most likely has the same bugs. Never tried it because I prefer stock Android.
2nd, the connection error fix for vanir could also work for CM (vanir uses stuff from CM).
I recently bought a FLIR ONE thermal imaging camera. Unfortunately, the device is not detected on my D802 using any marshmallow ROM.
I was using Resurrection Remix rom, but also tried Paranoid, XOSP, Dirty Unicorns, AICP, .... with no luck. Also, flashing Dorimanx and Lambda kernel didn't help.
When I run Chainfire USB Host Diagnostics, it says the kernel supports it, but OS does not.
On Lollipop (stock-based) roms, there is no issue, and the device is detected.
Can someone explain why the marshmallow ROMs miss this support. Is there any way to get this working ? I'm now running a LP rom again, just to be able to use the cam, but it really feels like a downgrade.
Same here, did you manage to fix it?
tehsYs said:
Same here, did you manage to fix it?
Click to expand...
Click to collapse
No fix other than going to stock based ROM or other phone.
All mm/aosp/caf roms are using a generic otg driver that breaks support for usb host intent filters. In other words, the phone won't broadcast to applications the a usb otg device has been plugged in.
It's not just your device in question, any device other than flash storage doesn't get detected. A developer could probably fix this but as it is broken in all non-stock roms it would probably be challenging to fix.
I do android development Mostly for the droid turbo, apps and tweaks. I think i may be able to help out here.
I did manage to get flir one working on none stock rom last night. It worked fine on stock. Then i seen this post installed cm and no joy. So after a bit of tweaking i did get it to work. I will see if i can come up with some kind of Universal patch for all users.
I will try and post a how to video to get it working on non stock roms. I am going to pull out some other phones to see if the patch works on all phones.
Keep an eye on my youtube channel http://www.youtube.com/iphostway/videos
I will work on a Universal fix starting today.
computerfreek274 said:
I do android development Mostly for the droid turbo, apps and tweaks. I think i may be able to help out here.
I did manage to get flir one working on none stock rom last night. It worked fine on stock. Then i seen this post installed cm and no joy. So after a bit of tweaking i did get it to work. I will see if i can come up with some kind of Universal patch for all users.
I will try and post a how to video to get it working on non stock roms. I am going to pull out some other phones to see if the patch works on all phones.
Keep an eye on my youtube channel http://www.youtube.com/iphostway/videos
I will work on a Universal fix starting today.
Click to expand...
Click to collapse
That would be really cool
If I can help testing your fix, please let me know.