[Q] Opendelta not updating the NIGHTLY - Omni Q&A

Hi i'm using Samsung Galaxy Note GT N7000 Omni Rom version 20140426
I have TWRP Recovery. Whenever i'm trying to install updates through Opendelta (Settings>About Phone>Update System>Check Now)
the system downloads various files but fails to flash it again and again. in last its hows that i have a 20140426 as a latest update.
Am i missing any step.
Please guide me.
Thanks.

Related

[Q] Omnirom + Samsung-N7000 unable to flash any other Custom ROMs

Hi,
I recently started experimenting with omnirom and Samsung Galaxy N7000. The build installs perfectly fine along with Google Apps (from Paranoid Android) . However, when I try to install another Custom ROM like Paranoid Andriod-3.99-RC2 for N7000 or PACMAN ROM for N7000, it fails to install. The details:
Omnirom version: omni-4.4-20131204-n7000-NIGHTLY
Device: Samsung Galaxy Note N7000 - International / India.
Google Apps: pa_gapps-full-4.4-20131126-signed
I have attached the log (recovery.txt) for reference.
Any advise / help is appreciated.
... Prashant
This is a recently confirmed issue that I'm not sure what the solution is.
Google made a bunch of changes to how system properties are handled between 4.3 and 4.4. They created some compatibility features such that 4.4 update-binaries would flash on older (4.3 and previous) recoveries, but that doesn't work when flashing zips with 4.3 (and older) update-binaries from a recovery built with 4.4
On most devices, the solution is to just build recovery from a 4.3 tree - but since recovery and kernel are one and the same on the galaxys2 family, there's currently no good solution other than flashing a kernel with a 4.3 (or older) recovery in order to flash a 4.3 (or older) ZIP.
Or the other option which SHOULD work is to remove all the assert checks from the updater-script.
Just flash a custom CM10.2 kernel like raw kernel 4 r3p2 and reboot in recovery.
Then follow the instructions for PA or Pacman.
GALAXY NOTE N7000 // KITKAT // KRT16S

f300T - Cm10.2 Ok --> Update Cm11 Impossible

Hi all,
Before to explain my problem, I want to do my Apologies because I'm french and my English isn't Fluently ^^
So, I have a TF300T unlocked with TWRP. I setup the stable CM 10.2 for my tab and it was a success.
But when i want to update with the CM11 proposed in Settings of the Tab, i have this message in TWRP :
E : error executing updater in zip '/sdcard/cm-11.....
Error Flashing ZIP.
Failed in red
My intial config is JB Stock 4.2.1.
I tried to install a CM 11 directly with TWRP and didn't work ....
Can you Help ME please ?
I have to install CWM ? But wich version ?
Thanks for you help .
(Now i set up a official 4.2 from Asus (available on Asus Website) in waiting an issue)
With an OmniRom, I have the same problem ...
Sense
Sensenix said:
Hi all,
Before to explain my problem, I want to do my Apologies because I'm french and my English isn't Fluently ^^
So, I have a TF300T unlocked with TWRP. I setup the stable CM 10.2 for my tab and it was a success.
But when i want to update with the CM11 proposed in Settings of the Tab, i have this message in TWRP :
E : error executing updater in zip '/sdcard/cm-11.....
Error Flashing ZIP.
Failed in red
My intial config is JB Stock 4.2.1.
I tried to install a CM 11 directly with TWRP and didn't work ....
Can you Help ME please ?
I have to install CWM ? But wich version ?
Thanks for you help .
(Now i set up a official 4.2 from Asus (available on Asus Website) in waiting an issue)
With an OmniRom, I have the same problem ...
Sense
Click to expand...
Click to collapse
You need to use TWRP 2.6.3.2 to flash CM11 or OmniROM. Install it and then reboot back into CM10.2 and then install CM11.
Is there no recovery that will install both cm10 and cm11?
Sent from my TF300T using Tapatalk
kmoffat said:
Is there no recovery that will install both cm10 and cm11?
Sent from my TF300T using Tapatalk
Click to expand...
Click to collapse
It is not possible to flash both CM10 based ROMs and CM11 based ROM on the same TWRP without editing the ROM itself.
cmendonc2 said:
It is not possible to flash both CM10 based ROMs and CM11 based ROM on the same TWRP without editing the ROM itself.
Click to expand...
Click to collapse
Patches to make both work are under way. My MultiROM TWRP can do both without changes, but it is much harder to integrate into a normal ROM+recovery build. Those patches are still unstable.
Sent from my TF300T using Tapatalk
suggestions?
I currently am (happily) running cm10.2 with twrp v2.6.3.0, bootloader US_epad-10.6.1.27.5-20130902 but would like to try kitkat. Would multirom be an option? (I'm new to this, and have only tried CROMi-x and CM10.2) Or would a flash of an updated twrp and cm11 be a better choice for a newbie?
thanks!

[Q] Problems with CM OTA not updating

Sorry for the n00b question.. Please don't flame me.
I'm running the latest Philz recovery with official CM nightly (16/Oct) and when I download the latest OTA update, it reboots the phone and doesn't update.
Just wondering if this is an issue with CM or PhilZ?
If it's the reocvery, does TWRP work instead?

[Q] error executing update binary twrp recovery?

guys i am having a recovery problem on all the roms...i tried to flash 3 roms but they all are not flashing...only the first rom is flashing correctly cm12 rom by TeamCanjica any other rom cm12 didnt flash and the miui rom also didnt flash...i have a samsung galaxy s4 i9500.

Please Help

Hey xda peeps. I'm new to the site and wanting to upgrade my note 3 roms but having some trouble getting custom roms installed.
First of all my phone specs.
SM-N9007 galaxy note 3
Ver. - 5.0 lollipop
Base - N007DIUGBOI1
KERNAL - 3.4.0-6104449
[email protected] #1
BUILD - LRX21V.N9007DIUGBOJ3
SE STATUS - Enforcing - SERP_SM-N9007_5.0-1_0039
S0V - MDF V1.0 R4 - VPN V1.4 R4.1
These roms are for the n9005 5.0.
I have tried full system wipe/dalvik cache and for a fresh install but does the same thing.
All help is much appreciated.
Thanks
Tasks performed,
Rooted
TWRP RECOVERY
(XPOSED FW won't work due to odex files) - Have tried looking for a compatible guide to deodex my stock rom but have stuggled to get a working one.
Tried installing 2 ROMS
Audax
0mega
Darkwolf
TWRP install zip doesn't flash rom it saying Can't find md5 file or checking for MD5 then after 20seconds it lists aroma 2.4xx installing files then freezes which writes the Rom name and then stops and reboots to recovery
I'm on day 5 browsing google and xda guides to get this custom rom and exposed installed but have had no luck.
Just wondering if the zip files corrupt or TWRP is not working?
Sorry in advanced if you get this all the time which after 5 days im reverted asking the community for guidance
Sorry for not being able to provide help as I am a noob aswell, but how did you get the custom recovery (team win) to work on your phone? I have the same model and it seems very rare. Did you flash a sm-n9005?
Sorry if I misunderstood anything I am a noob!
Thanks!
Who are you asking the 2016 poster or an even older post ??

Categories

Resources