Stuck in Fastboot, did I brick my phone? - Droid RAZR M Q&A, Help & Troubleshooting

Greetings all. I was trying to RSD to get ready for the kit kat when everything went south. I was unlock, and rooted.
Here is what I get now.
"AP Fastboot Flash Mode (S)
10.98(*) (sha-with a bunch of numbers)
eMMC info:size 8GB
Device is locked, status code:0
Battery OK
Connect USB
Data Cable
downgrade security version
update gpt_main version failed
Faled to hab check for gpt_backup:0x35
failed to load GPT
CID Read Failure
Invalid CID Status 0x69"
I am neither novice or expert, I spent the whole night trying to fix this, but now of the antidotes I found seem to do anything for this. Any help is greatly appreciated.

Related

Failed to re-lock P9lite VNS-L31

Hi!
Got a problem, need to send my p9 lite to service bc it fell with me into water. it still works, but I assume a chip is frozen because neither the wifi nor bluetooth can be turned on. I'm afraid theyre not fixing my problem because I unlocked it.
I flashed twrp recovery, rooted, but already flashed the stock rom and unroot again.
When I tried to relock with adb and bootloader code, I got the error code root risk is too high
Tried to install other stock roms again and a lot of stuff, but none of it worked. So I tried to relock via dc-unlocker. com but didnt work. But now it says when I restart "your device has failed verification and may not work properly." instead of "Your device has been unlocked and can't be trusted." and when I tried to use adb to relock with the bootloader code it says "remote: stat not match" ~ got a new bootloader code??
I'm desperate, can anyone help me?
put update.app into dload folder in micro sd card and try 3 button method.
hey i have just the same problem and when i try the 3 button method i get the error software install failed.
but i have no revolution twrp any more and i think also no erecovery beacuse i cant do a factory reset when i tried to enter erecovery with power button , volume + button then i go automatic to software update and at the 5% i get the error software install failed i hope some body get a solution to fix my phone without dc-unlocker
ps i was on android nougat but i think there any os now because the phone dont boot sorry for my bad english hahah

Another brick

Hello everyone,
And yes another idiot who blocked his phone.
I wanted to update my phone in B370.
For that I am ironed in B160 and I wanted to update by HIsuite but it did not work.
So I went through HuaweiUpdater and the disaster ... I completely blocked my phone.
I only have access to Fastboot and that's it. Otherwise it stays on:
"Your device has failedverification and may not work properly"
In fast boot I tried to flash the recovery = Failed.
My phone is a vns-l31 bootloader and FRP unlocked
Can you help me ?
thank you in advance
Plz help
As well,
In RevolutionRecovery I have this data error:
Mount -0 bind '/ data / media' '/ sdcard' process ended with ERROR = 134
someone help me?

Bricked after upgrading from Marshmallow to Nougat

Hello, a friend asked me for help unbricking his phone, apparently he downgraded to marshmallow, had some wifi troubles, tried to upgrade back to nougat and bricked the phone, the phone can enter fastboot and recovery mode but I can't flash the stock firmware because it gives me the verification failed message when trying to flash the files, I have been reading lots of tutorials but I can't get any of them working, when trying the blank flash thing the CMD window just stays in the waiting for device message.
Any help would be appreciated, thanks in advance.
zeratos said:
Hello, a friend asked me for help unbricking his phone, apparently he downgraded to marshmallow, had some wifi troubles, tried to upgrade back to nougat and bricked the phone, the phone can enter fastboot and recovery mode but I can't flash the stock firmware because it gives me the verification failed message when trying to flash the files, I have been reading lots of tutorials but I can't get any of them working, when trying the blank flash thing the CMD window just stays in the waiting for device message.
Any help would be appreciated, thanks in advance.
Click to expand...
Click to collapse
If device is able to boot into bootloader, then blankflash will not work..
What is version of firmware you are trying ?
Currently this is latest firmware >> https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
Validation or bad key id errors are ignorable, ignore them.
Just make sure you get OKAY at end of Command..
If you get any error, post cmd screenshot or copy test and pasre here..

soft bricked my G928F

It's a long story but I soft bricked my G928F.
I bought it off Gumtree in the U.K and it had an frp lock on it, the seller stated that she had wiped it off so would not take it back. I had a read around and it seemed that Wondershare Dr. Fone would take off the frp lock........it didn't, rather it messed up the stock recovery. When attempting to enter recovery I get the following message and am stuck in a bootloop:
No Support SINGLE - SKU
Supported API: 3
dm-verity error
failed code: 0x02
E: failed to mount /cache (invalid argument)
While Odin will recognise the phone Smart Switch will not so I am unable to use the emergency recovery procedure.
I have read similar posts where it implies Smart Switch is the last resort but in my case that doesn't seem to be an option
Can anyone suggest a way to recover the phone or do I throw it in the bin? Any help appreciated
meohmy said:
It's a long story but I soft bricked my G928F.
I bought it off Gumtree in the U.K and it had an frp lock on it, the seller stated that she had wiped it off so would not take it back. I had a read around and it seemed that Wondershare Dr. Fone would take off the frp lock........it didn't, rather it messed up the stock recovery. When attempting to enter recovery I get the following message and am stuck in a bootloop:
No Support SINGLE - SKU
Supported API: 3
dm-verity error
failed code: 0x02
E: failed to mount /cache (invalid argument)
While Odin will recognise the phone Smart Switch will not so I am unable to use the emergency recovery procedure.
I have read similar posts where it implies Smart Switch is the last resort but in my case that doesn't seem to be an option
Can anyone suggest a way to recover the phone or do I throw it in the bin? Any help appreciated
Click to expand...
Click to collapse
Flash this using odin :
https://drive.google.com/uc?id=1tg9hJOCquyfuyROYtgpxyVKNbuidzdL8&export=download
Then, you will be able to flash latest version normaly, and also your will remove frp lock.
Thanks for that, I will flash it when I get home and report back.
Didn't work for me, the combination file gave an 'md5 error! Binary is invalid' message when loading into Odin, while renaming to .tar the flash failed.
firmware update start
Single download
sboot bin
param.bin
FAIL
Thanks for your suggestion though.
I tried installing firmware G928FXXS5CRH1 (VOD) but it failed at hidden system image, I removed that file and created a .tar which flashed successfully but the phone rebooted
to recovery initially but still showed a dm-verity error. I deleted the cache and then factory reset which appeared to also complete successfully but the phone would not boot up.
I then tried flashing the hidden sys image on its own but that failed and the phone went to the Smart Switch error recovery page, Smart Switch will not recognise the phone so will not allow access to the emergency recovery facility.
Still trying though if anyone has any idea's.
Hi there,
Im in the same boat. It had the verity error too.
BUT:
For me it worked to flash the 4-part firmware of the G928FXXS5CRH1 via Odin then.
The device boots again, without the verity error
It had Android 5.1 before, when I could flash the COMBINATION ROM and use it just fine.
(but it was a Android 7 combination ROM) :/
After flashing Android 7 debranded (G928FXXS5CRH1) in 4-parts (BL, AP, CC and CSC file) the FRP lock is still there of course,
but the phone is booting again without the verity error.
COMBINATION ROM will no longer let me flash it, though.
https://forum.xda-developers.com/s6-edge-plus/help/g-928f-verity-0x02-modem-bin-fail-t3886122
The download I did via the tool "samfirm" use chk32 and decrypt on downloading !
"SM-G928F_1_20180828170540_5avji4munw_fac"
Thanks for the reply, I fixed it myself in the end. I spent 2 days over Xmas until I eventually tried the solution that you have suggested. I eventually found a 4 part software. AS to the FRP lock, be it good luck or persistence, I managed to get rid of that as well using Samsung FRP Tool.
meohmy said:
Thanks for the reply, I fixed it myself in the end. I spent 2 days over Xmas until I eventually tried the solution that you have suggested. I eventually found a 4 part software. AS to the FRP lock, be it good luck or persistence, I managed to get rid of that as well using Samsung FRP Tool.
Click to expand...
Click to collapse
Hell Friend, Not sure If you could get this message, If yes, Kindly help me., I am facing the same issue with my Samsung Galaxy Note 5 (N920G/I) but could not find 4 parts FRP unlock firmware. Do let me know If anyone finds one.
Thanks!

[HELP] MI A1 Failed to load BCB message, failed to fsync (operation not permitted).

Yesterday suddenly while turning on my device it stuck at android one logo.
Device status : Bootloader locked, No Root. Never hard reset in past. it was running as it was out of the box with latest May 2020 security update.
So, i tried to unlock bootloader with adb which offcourse failed.
then i tried to hard reset, as i opened recovery mode (power + vol+) there was an error E: failed to load bcb message, failed to fsync : operation not permitted.
still i choose wipedata/factory reset. it stuck at [wiping data... formatting disk...] for 5 hours. i understood it wont proceed.
Then, i opened the device went to unlock bootloader with EDL method as shown in few videos ( by connecting pins and plugging usb to pc). it showed in the pc ( qualcomm was listed in device manager> ports)
Then i downloaded Mi flash and official rom, was unable to flash with error "ack count don't match".
Again reading here and there, i downloaded miflash-beta, it was able to flash the device successfully.
disconnected the usb, connected the battery strap and started device > Again it stuck at android one screen for 1 hour.
So, i again went to recovery mode to find out that the error " E: failed to load bcb message, failed to fsync : operation not permitted." Still exists.
Read here in some thread that it is related to partition damaged, but no solution anywhere.
Please help me with solution. This is my only phone. i don't have any job nor money to buy other phone during lockdown.
HELP.
Thanks everyone for this wonderful forum.
MIA1_Stuck said:
Yesterday suddenly while turning on my device it stuck at android one logo.
Device status : Bootloader locked, No Root. Never hard reset in past. it was running as it was out of the box with latest May 2020 security update.
So, i tried to unlock bootloader with adb which offcourse failed.
then i tried to hard reset, as i opened recovery mode (power + vol+) there was an error E: failed to load bcb message, failed to fsync : operation not permitted.
still i choose wipedata/factory reset. it stuck at [wiping data... formatting disk...] for 5 hours. i understood it wont proceed.
Then, i opened the device went to unlock bootloader with EDL method as shown in few videos ( by connecting pins and plugging usb to pc). it showed in the pc ( qualcomm was listed in device manager> ports)
Then i downloaded Mi flash and official rom, was unable to flash with error "ack count don't match".
Again reading here and there, i downloaded miflash-beta, it was able to flash the device successfully.
disconnected the usb, connected the battery strap and started device > Again it stuck at android one screen for 1 hour.
So, i again went to recovery mode to find out that the error " E: failed to load bcb message, failed to fsync : operation not permitted." Still exists.
Read here in some thread that it is related to partition damaged, but no solution anywhere.
Please help me with solution. This is my only phone. i don't have any job nor money to buy other phone during lockdown.
HELP.
Thanks everyone for this wonderful forum.
Click to expand...
Click to collapse
did you find any solution
Same with my phone. Did you find any solution ?

Categories

Resources