Database Users

[Q] Bricked GS4/bootloop (I9505) (SOLVED)

Hi all,
After installing the latest Omega ROM (Omega 9), everything seemed fine at first.
After a couple of hours I was unable to install any apps from Play Store.
Restarted a couple of times, still same issue.
Then I've decided to do a Factory Reset.
After doing this, the phone is stock in a bootloop.
When started, the Galaxy S4 logo appears briefly and dissapears again.
I am unable to boot into recovery.
When trying to do so, I see the blue screen at the top and after 5 seconds everything dissapears.
I can, however, access Download mode.
My question is, as I've never done this before.
Would the best thing to do be flashing a Stock Firmware from sammobile using Odin 3.07?
I was thinking of doing this:
Downloading this ROM from Sammobile:
Model: GT-I9505
Country: Netherlands
Version: Android 4.2.2
Changelist: 1081224
Build date: Thu, 11 Jul 2013 10:56:37 +0000
Product Code: PHN
PDA: I9505XXUBMGA
CSC: I9505PHNBMG4
MODEM: I9505XXUBMGA
Start Odin 3.07
Turn off phone first, start it in Download mode, connect it to PC.
Load the downloaded file as PDA (?)
Leave Auto Reboot and F. Reset checked and hit Start.
Well, I never did this before so I wanted to double check.
Will this solve my problem you think?
I also have a custom recovery...
Will this restore the stock recovery as well?
Thank you.

Might work but if you still can't get to recovery or phone flash fails around NAND write it means you need to flash a .pit file... Make sure you get the right one and if possible with an MD5 checksum... If the pit stuffs up while flashing (or you flash the wrong one) you can actually hard brick your phone...

So, I pretty much did exactly what I wrote in my first post and my problem is solved.
I did get a mini hart attack in the beginning as I never had this before with my Galaxy S2 and S3.
No the phone has only root with Triangle Away.
I'll avoid custom ROM's for a while

[Q] SGH-I337M No Sound or WIFI???

I have tried everything in this forum in regards to re-flashing, the weird thing is I can flash 4.2 which boots up, but no sound or wifi, also once it boots I am able to use Kies to Upgrade the 4.4, but still no sound or wifi, if I try and flash 4.3 JB through Odin it fails every single time, I have tried multiple versions of Odin and multiple sources for the firmware file???

mza2k9 said:
I have tried everything in this forum in regards to re-flashing, the weird thing is I can flash 4.2 which boots up, but no sound or wifi, also once it boots I am able to use Kies to Upgrade the 4.4, but still no sound or wifi, if I try and flash 4.3 JB through Odin it fails every single time, I have tried multiple versions of Odin and multiple sources for the firmware file???
Click to expand...
Click to collapse
1. Dial *#1234# and attach the screenshot
2. Tell me if your phone is branded to one company phone or u bought it unlocked.

It is Branded to Rogers Wireless Canada.

mza2k9 said:
It is Branded to Rogers Wireless Canada.
Click to expand...
Click to collapse
1. You have to go SamMobile and sig in
2. Look for ur phone and download this firmware:
Model: SGH-I337M
Model name: GALAXY S4
Country: Canada (Rogers)
Version: Android 4.4.2
Changelist: 880525
Build date: Fri, 28 Feb 2014 16:41:46 +0000
Product Code: RWC
PDA: I337MVLUFNC1
CSC: I337MOYAFNC1
MODEM: I337MVLUFNC1
3. Download it and unzip it.
4. Wipe all in ur phone
5. Reboot in DOWNLOAD MODE
6. Use Odin for flash that firmware (like the pic attached)
7. Good luck

I have registered at Sammobile and downloaded the correct firmware for 4.3 and it will not flash gets all the way to the very end and when it verifys it fails??

mza2k9 said:
I have registered at Sammobile and downloaded the correct firmware for 4.3 and it will not flash gets all the way to the very end and when it verifys it fails??
Click to expand...
Click to collapse
You downloaded wrong firmware. You have to download the one I was telling ya before in post #4 :silly:

ok I will try the 4.4 when I get home the one you suggested, howvever I'm pretty sure I tried that with no sound and wifi issue.. i'll keep yopu posted thanks

mza2k9 said:
ok I will try the 4.4 when I get home the one you suggested, howvever I'm pretty sure I tried that with no sound and wifi issue.. i'll keep yopu posted thanks
Click to expand...
Click to collapse
1. Flash that firmware 1 time and check if u dont have sound and wifi. If u havent them, flash again the same firmware 1 time more.
2. If the second time u flash it u still without them, dial *#1234# and attach the screenshot here and we will solve the problem :highfive:

Same issue
Hey, I'm having the exact same problem. I had a custom rom installed and I noticed that I didn't have much room left on my internal storage. It was probably a stupid move, but while my phone was plugged into my computer, I deleted a lot of the folders that I saw on my phone. I kept the folders I thought were important (Android, DCIM) but apparently I deleted some important files.
I have reset the phone multiple times. Still no wifi or no sound. I have the same model this person has (SGH-i337m) and it was locked to Rogers originally, but the person I bought it from had it factory unlocked. I'm assuming I still try flashing with the Rogers firmware? I still have 29 minutes left for the firmware to finish downloading and then I'm going to try flashing it twice like you recommended.
If that doesn't work, I really hope you see this and are able to help me out. If it doesn't work, I will dial #1234# and post what it says. Please reply asap if you see this. Thanks!

I have the same problem as well!
It wasn't until I read this post that I realized I have not sound either.
I'm in the process of running the update through Kies (takes FOREVER) and then I'll try these instructions. Originally locked to Rogers, but was unlocked so I can use SIM cards in other countries.
I flashed to CyanogneMod and then tried to go back and now have this problem, with the kernel warning in red when the phone starts.
I had this version on my phone before CyanogenMod - can I try putting it back on, or do I use the March/2014 release?
Model SGH-I337M
Model name GALAXY S4
Country Canada (Rogers)
Version Android 4.4.2
Changelist 2767305
Build date Mon, 29 Sep 2014 04:07:02 +0000
Product code RWC
PDA I337MVLUFNI2
CSC I337MOYAFNI2
MODEM I337MVLUFNI2
Fingers crossed!

TeknikalMusic said:
Hey, I'm having the exact same problem. I had a custom rom installed and I noticed that I didn't have much room left on my internal storage. It was probably a stupid move, but while my phone was plugged into my computer, I deleted a lot of the folders that I saw on my phone. I kept the folders I thought were important (Android, DCIM) but apparently I deleted some important files.
I have reset the phone multiple times. Still no wifi or no sound. I have the same model this person has (SGH-i337m) and it was locked to Rogers originally, but the person I bought it from had it factory unlocked. I'm assuming I still try flashing with the Rogers firmware? I still have 29 minutes left for the firmware to finish downloading and then I'm going to try flashing it twice like you recommended.
If that doesn't work, I really hope you see this and are able to help me out. If it doesn't work, I will dial #1234# and post what it says. Please reply asap if you see this. Thanks!
Click to expand...
Click to collapse
1. Install this APP and see the CSC (like in the pic attached) for know your country code.
2. Download the correct firmware in Sammobile.com with the correct CSC.

ok, I can breathe again.
I flashed the ROM that I detailed above and everything is working again.... sound, wifi, camera.... let's not talk about everything that was f'd up...
Thing I have learned:
Breathe. and don't show your stress when things go belly-up.
Ignore husband laughing at me and saying that he won't let me have HIS Samsung S4 to mess with now that I f'd mine
Always back up.
even more importantly, DON'T BACK UP WITH KIES. I LOST ALL MY TEXTS.... research a good backup program
keep the latest working version of your ROM on your desktop for the next time you f up for easy reference.......

[HOW-TO] Update Firmware via Kies & Rom/s - Samsung Galaxy Note 10.1 GT-N8010

This is an Official Samsung Galaxy Note 10.1 GT-N8010 Upgrade for all Nations - UK Upgrade.
Hardware and Software Prerequisites'
1. PC or Laptop.
2. USB Port.
3. USB Cable to Device.
4. USB software for Device installed on PC or Laptop - This is generally PnP, computer must be able to see the Device > Computer via Start menu on PC or Laptop.
5. Latest Odin Download > Install it on PC or Laptop.
Steps #1
1. First you need to join Sam Mobile.com with Free or Premium Membership.
2. Login and go to Sam Mobile Firmware page to download the latest Firmware - You may download from other nations the firmware as long as it is Universal Compatible with your Device Model Number.
** This does not impede on Device Warranty or T&C.
Example -
I am located in Australia, However this Firmware is Universally Compatible for the Same Model.
Model: GT-N8010
Model Name: GALAXY Note 10.1
Country: United Kingdom
Version: Android 4.4.2
Build date: Mon, 26 May 2014 13:44:32 +0000
PDA Firmware: N8010XXUDNE4 (1.1GB estimated)
Once you have downloaded the Firmware follow Steps 2.
Steps #2
1. Connect Device to PC or Laptop via USB Cable.
2. Check Device is Visible to Computer > Computer via Start menu on PC or Laptop.
3. Pull-down Notification bar.
4. Tap - Touch for Other USB Options.
5. Select MTP.
You Should now be able to see and access your storage on your Device, if not see help from web on your device model as you may need a Driver.
6. Turn Device Off.
7. Put Device into Download Mode - Hold Power + Down Volume, this you will see a Warning!.
8. Press - Up Volume, this you will see 'Downloading', 'Do not turn off Target!!'.
** DO NOT TOUCH DEVICE IN DOWNLOAD OR DOWNLOADING SCREEN UNTIL UPDATE IS COMPLETE!
9. Unzip your Kies or Rom Download.
10. Open Odin program on PC / Laptop.
ID:COM should be Blue - Yes move onto next Step.
NO - check Device is connected via USB and is viable by the Computer or follow steps 1 - 5 in this section again.
11. Un-ticked - Re-Partition.
12. Tick - File box next to AP.
13. Click - AP Button.
14. Select - File you extracted from zip folder ending with .tar.md5 or Image file.
15. Click - Start.
16. Done.
Process of Upgrade
1. The device will reboot automatically.
2. Android is upgrading 1 of 136.
3. The device will reboot automatically.
4. Login Screen.
5. Done.
Note - Yes the indicators are white and will stay so, this is Samsungs choice, Change font for better viewing.
Setup Samsung Link - Uninstall Update
There after install you will have to goto Google Play Store - Samsung Link App
MY APPS
Samsung Link
1. Uninstall App Update - if you have done an Update on previous Firmware Version for this to work on KITKAT 4.4.2
* The Update is not compatible at this time.
2. Open App
3. Run the Setup again, so that it can load your previous setups and connections.
Optional App
1. Download Touchwiz Nova and Install App.
2. Import Touchwiz Home.
3. Backup Settings.
This Update has been Beta Tested ... Working 100% Perfect :angel: ... Donate if Happy. :fingers-crossed:
Brett J Hutton
Strykerslounge - Facebook

KITKAT 4.4.2 Firmware Update
[Official Release] KITKAT 4.4.2 for Samsung Galaxy Note 10.1 - N8010
Hello,
Below is the Thread Link to update the latest Samsung Official Firmware 4.4.2 for GT- N8010
Link
HOW-TO Update Firmware via Kies & Rom/s - Samsung Galaxy Note 10.1 GT-N8010
Note: When you do this Upgrade, your device will be unrooted if you have rooted it.
Beta Tested: 100% Perfect
To find out your Model - Look at the back of your Tablet.
Australia
Model: GT-N8010
Model name: GALAXY Note 10.1
Country: Australia
PDA: N8010XXUCMK2 Version 4.1.2
This will be upgraded to -
Model: GT-N8010
Model name: GALAXY Note 10.1
Country: United Kingdom
PDA: N8010XXUDNE4 Version 4.4.2
Brett J Hutton
Strykerslounge - Facebook

Samsung Link - Uninstall Update
Setup Samsung Link - Uninstall Update
There after install you will have to goto Google Play Store - Samsung Link App
MY APPS
Samsung Link
1. Uninstall App Update - if you have done an Update on previous Firmware Version for this to work on KITKAT 4.4.2
* The Update is not compatible at this time.
2. Open App
3. Run the Setup again, so that it can load your previous setups and connections.

I had a problem with flashing it via Odin (stuck at "get PIT for mapping) so I flashed it through mobile odin pro... Which at the same time rooted the firmware and solved the issue. Btw I love how they redisigned it. Kinda less boring

Other models
Hi guys! I have one question, can I install this rom in a N8010XXUCMG1 (France) model?

General Update via ODIN Questions
As far as I can see, this HOW-TO indicates that there are no issues with updating my GT-N8010 Canada version with the UK version? Is this correct?
And if I follow the process as explained, will any data be lost? App data? Personal data?
Thanks in Advance!

bazinga137 said:
I had a problem with flashing it via Odin (stuck at "get PIT for mapping) so I flashed it through mobile odin pro... Which at the same time rooted the firmware and solved the issue. Btw I love how they redesigned it. Kinda less boring
Click to expand...
Click to collapse
Yes it does UN - Root the Device and I like it overall use with nova added.
It is better to leave device un-rooted unless needed to be rooted.

Open to All Nations
lcfb91 said:
Hi guys! I have one question, can I install this rom in a N8010XXUCMG1 (France) model?
Click to expand...
Click to collapse
Yes.
You can use this in any Nation.

Universal
cuirbear said:
As far as I can see, this HOW-TO indicates that there are no issues with updating my GT-N8010 Canada version with the UK version? Is this correct?
And if I follow the process as explained, will any data be lost? App data? Personal data?
Thanks in Advance!
Click to expand...
Click to collapse
This is Universal for all Nations - No Regional Lock.
Please keep in mind that a couple of the newest apps Samsung have supplied are being tested in UK only, this includes some in Samsung app store (such will tell you), meaning not yet available for other nations until becomes available to you locally.
All apps you use are designated to your Nation availability not worldwide in all.

Rooting These Devices -
If you need to ROOT these types of Devices for purpose of Su or Root Explorer etc.
Use link below to Forum Thread Write-up -
[GT-N80xx/SHW-M480x] CF-Auto-Root

Hey guys a new build is already out! N8010XXUDNG1
http://live.samsung-updates.com/index.php?device=GT-N8010
Perhaps this one supports cascade multitasking

I just installed N8010XXUDNE4_N8010BTUDNF1_BTU on my Canadian device. It kept everything from before but i had problems with google account authorization in the play store. After doing a factory reset everything worked well.

[Q] s4 4.4.2 stock, will not allow install other mod!

Hello,
Being fet-up with samsungs useless bloatware now constantly asking for agreeing new legal and other, I wanted to go towards a rom that allows full control on what MY phone should or should not do or install!
I managed to root the s4 (not branded, orignal samsung so no sprint or At&T,...) tripping the stupid knox , but I do not realy care as I do not trust these solutions to be great, if some other samsung pushed solutions do not work either.
Nevertheless, I seem to be stuck not able to flash a new rom. I'm simply not getting in the recovery mode of CWM or something else.
I tried rom manager, which says : cwm flashed, I tried sgs4 Flasher, I tried ODIN troiugh computer. It all says "flashed, but when I want to get into the flash, I do not get the full menu, seems to be a standard Samsung flash rather then a mod flash recovery.
The name of the flash: KOT49H.I9505XXUFNA5, my mobile itselve has :
Model number: GT-I9505
Android version 4.4.2
baseband version: I9505xxugng8,
Kernel version: 3.4.0-2309103 from wednesday July 23,
Built number KOT49H.I9505XXUGNG8
SE FOR ANDROID STATUS: Enforcing SEPT-GT I9505_4.4.2_0019
Secure boot status: Type: Samsung
Security Software Version: MDF v1.0 Release 2
What I want: To be able to have another rom on it, so therefore I need to boot into CUSTOM recovery, what is not happening.
Can anybody help me? (might become a general problem for everybody later on so it might be interesting to know how to solve!

dreamfox said:
Hello,
Being fet-up with samsungs useless bloatware now constantly asking for agreeing new legal and other, I wanted to go towards a rom that allows full control on what MY phone should or should not do or install!
I managed to root the s4 (not branded, orignal samsung so no sprint or At&T,...) tripping the stupid knox , but I do not realy care as I do not trust these solutions to be great, if some other samsung pushed solutions do not work either.
Nevertheless, I seem to be stuck not able to flash a new rom. I'm simply not getting in the recovery mode of CWM or something else.
I tried rom manager, which says : cwm flashed, I tried sgs4 Flasher, I tried ODIN troiugh computer. It all says "flashed, but when I want to get into the flash, I do not get the full menu, seems to be a standard Samsung flash rather then a mod flash recovery.
The name of the flash: KOT49H.I9505XXUFNA5, my mobile itselve has :
Model number: GT-I9505
Android version 4.4.2
baseband version: I9505xxugng8,
Kernel version: 3.4.0-2309103 from wednesday July 23,
Built number KOT49H.I9505XXUGNG8
SE FOR ANDROID STATUS: Enforcing SEPT-GT I9505_4.4.2_0019
Secure boot status: Type: Samsung
Security Software Version: MDF v1.0 Release 2
What I want: To be able to have another rom on it, so therefore I need to boot into CUSTOM recovery, what is not happening.
Can anybody help me? (might become a general problem for everybody later on so it might be interesting to know how to solve!
Click to expand...
Click to collapse
After a long day of trial and error, i finally manged to get it to work, by activating recovery from standard functioning within the clockworkmod APK program from google play store
Via the 3 buttons (volume up/down | power | and home, it never worked to get in the clockwork or other custom recovery.
Maybe samsung pushed within its latest update a blocage (i received around mid september 2014, probably an older update), a blockage with the buttons so that getting into an fresh installed recovery is kinda not possible and it keeps reinstalling the stock one over it......anyway, now it works...

[Q] Wifi not working after update

Hello,
new firmware was released for East Europe. Phone SM-g530fz. After upadate my wifi stoped working. I did factory recovery, cache wipe. Nothing helped. I jumped to download mode and there is written "Current binary: Custom" "System status: Custom" and knox warranty is void. I din't root my phone or do something similar. What the .... Pls help
Fixed. When I was updating my phone I have rooted rom, so that corrupted some files and phone couldn't launch wifi successfuly. I flashed stock rom and then updated to new one.

Perhaps someone has made some changes in your phone that you don't know?
You may try this guide by AndroidFire at this thread : http://forum.xda-developers.com/grand-prime/orig-development/guide-flashing-stock-rom-t3039167

PLEASE HELP WIFI NOT WORKING (SWITCHING ON/TURNING ON) AFTER UPDATE not solved
mine also WIFI CANT BE TURNED ON after update i do have root access but before the update i unroot-ed and removed SD card.
1. phone - samsung grand prime SM-530H /DD
2. issue - wifi cant be turned/switched on
3. issue started - after update, ie updated via Kies3
4. things done to fix - hard reset, pulled out battery, changed named of wifi settings confg (which dint help so i reversed it again) and so on
5. current firmware -
Model SM-G530H
Model name GALAXY Grand Prime
Country India
Version Android 4.4.4
Build date Wed, 18 Mar 2015 08:56:02 +0000
Product code INS
PDA G530HXXU2AOC2
CSC G530HODD2AOA1 (this description of firmware is from Sammobile.com but its the same description on my phone and as i said before i updated via Kies3)

urmyaddict said:
mine also WIFI CANT BE TURNED ON after update i do have root access but before the update i unroot-ed and removed SD card.
1. phone - samsung grand prime SM-530H /DD
2. issue - wifi cant be turned/switched on
3. issue started - after update, ie updated via Kies3
4. things done to fix - hard reset, pulled out battery, changed named of wifi settings confg (which dint help so i reversed it again) and so on
5. current firmware -
Model SM-G530H
Model name GALAXY Grand Prime
Country India
Version Android 4.4.4
Build date Wed, 18 Mar 2015 08:56:02 +0000
Product code INS
PDA G530HXXU2AOC2
CSC G530HODD2AOA1 (this description of firmware is from Sammobile.com but its the same description on my phone and as i said before i updated via Kies3)
Click to expand...
Click to collapse
hahaha it worked. after i re-flashed it again

Tried everything, every tip phone can boot in download mode but when attached with USB odin not detecting it.....please help