i have it, but it completely detached and there's no way to keep track of it..its tiny
any advice?
Related
Hey all, i just recently bought this lovely phone from a friend of mine. I've been messing around with it for the past several days (Upgrading to WM6 and installing APPS, and even messing with the internet(tzone)). Anyways when if first got it everything seemed to be running fine and when i plugged it into the usb port for activesync, it worked. However the past day i tried to recharge my phone through the charger and later the car charger and it would not stay "connected." Like the little charge icon would come on and off. Me being the dumb person i am, tried to bend the plastic piece in the middle of the usb seeing if that would help make the connection better. While doing so i broke the plastic part and now it won't charge/snyc at all any more. Anyways, i figured i try to open up the phone see if i could maybe glue the piece back on. After opening it up though i see that i could maybe replace the whole conector ( with a lil soldering). i was thinking maybe buying some cheap electronic that had the same connector and replacing my wizard's connector with it. What are your thoughts on this? Could it work? I'm not an expert when it comes to soldering, but i do have some experience.
A few month's ago I'd ordered a LCD screen replacement for my incredible, and so when I got back from work o immediately took out the LCD from the package and started taking out my old broken. For me it was my first time experience replacing an LCD phone screen, anyways back to what I was going to say was when I unplugged the connector for the screen and the motherboard itself, after attempt to plug the connectors back together; the display connector plugged in perfect while the connector for the motherboard didn't do so well. The white piece that covers the PCB Connector, it tears a little bit off and I'd tried to power on the phone, meanwhile it didn't I tried again and things got worst. So I search online for a PCB Connector and see one, so I decided to and try to rip off the PCB Connector and plan to order the PCB Connector. So the part to attempt ripping off the PCB Connector didn't go so well, and stop there before things got worst. Any suggestions how I can replace that? I can't just leave my phone in my room and have to cover in dust. I need my phone back, how can I fix these? I know this thread seems long but I tries but it details for you guys.
So there's lots of questions about bad battery life but haven't found my issue in searches - altho I suspect my issue is a factor for many to some degree.
N4 took a 4' to drop to concrete. Screen cracked. Replaced screen w/no problems. Ran fine for a while on stock 4.4.4. Lollipop comes OTA practically zero day and since the N4 isn't my primary phone I upgrade to play around. Shortly after 5.0, the battery drains and shuts the phone off. I charge it overnight, pull it off, battery is dead, phone shuts down. Will stay on and operate fine on wireless charger but powers down if not connected. Pop off the back again to make sure battery connector is snug and reassemble. Now I've got red light of death. Get Google logo and can boot to recovery options but it just cycles. Disassemble again and ultimately find that the battery pins from the mainboard and their little black housing have come off at some point. Try to solder it back on but there's chips on the back side and there's just no room to get the solder on and pins reconnected. Not w/my skills anyway.
My main question is, has anyone successfully reconnected that annoying mofo? Thinking about skipping the connectors and just soldering wire straight from the battery to the board. I don't see anything in that connector that would be a problem if absent, but any warnings I should know about? Other workarounds?
This is not mission critical, just principle/spite.
Repaired?
gkmocv said:
So there's lots of questions about bad battery life but haven't found my issue in searches - altho I suspect my issue is a factor for many to some degree.
N4 took a 4' to drop to concrete. Screen cracked. Replaced screen w/no problems. Ran fine for a while on stock 4.4.4. Lollipop comes OTA practically zero day and since the N4 isn't my primary phone I upgrade to play around. Shortly after 5.0, the battery drains and shuts the phone off. I charge it overnight, pull it off, battery is dead, phone shuts down. Will stay on and operate fine on wireless charger but powers down if not connected. Pop off the back again to make sure battery connector is snug and reassemble. Now I've got red light of death. Get Google logo and can boot to recovery options but it just cycles. Disassemble again and ultimately find that the battery pins from the mainboard and their little black housing have come off at some point. Try to solder it back on but there's chips on the back side and there's just no room to get the solder on and pins reconnected. Not w/my skills anyway.
My main question is, has anyone successfully reconnected that annoying mofo? Thinking about skipping the connectors and just soldering wire straight from the battery to the board. I don't see anything in that connector that would be a problem if absent, but any warnings I should know about? Other workarounds?
This is not mission critical, just principle/spite.
Click to expand...
Click to collapse
So were you ever able to get the connector solder back on? I think mine break because it was to hot when I was removing the battery. My nexus 4 shutdown on me, my battery was expanded. I was wondering why my screen was being pushed out. I wonder if Android 5.0.1 is causing phone to run to hot. Never did this with Android 4.4.4. Hope the connector can be fixed. Maybe I take it to a solder shop.
jameswhite4684 said:
So were you ever able to get the connector solder back on? I think mine break because it was to hot when I was removing the battery. My nexus 4 shutdown on me, my battery was expanded. I was wondering why my screen was being pushed out. I wonder if Android 5.0.1 is causing phone to run to hot. Never did this with Android 4.4.4. Hope the connector can be fixed. Maybe I take it to a solder shop.
Click to expand...
Click to collapse
Not yet. I pulled the connector back off and cleaned everything up. I found that even very small gauge solder is too sloppy for the 4 small connections. Not to mention there's chips on the back side so you can't linger too long with heat. So my plan is to try again with some conductive ink and/or gel. If that doesn't work I'm just going to use wires to bridge the battery right to the board. Haven't had time to work on it but I'll follow up here when I do.
Did you get a replacement battery? Lithium batteries can swell because of overcharging. There are definitely more than a few N4 owners who had the same issue. A replacement battery won't solve that problem but it could be more tolerant of it, for a while - and depending on if it was "user error" or a fault in the phone's overcharging protection circuitry. Don't go to the trouble of having someone solder the connector back on with the old battery.
That. Noticed a weird chemical like smell in my phone, like tropical fruit essenced bleach, so turns out lithium battery was leaking.
Removed it, wrapped it in aluminum foil and left it in my rooftop to prevent damage if it fires up, that under a brick to procect it from sun light, while i look for a dispose center.
That aside, im thinking in buying a new phone cause this LG G2 is a pain in the ass already, 3.5mm jack is damaged so is the USB port, screen has a bit of dust in between the LCD and digitalizer and even worse it has dead spots where touch buttons are.
So question is, can i erase the internal memory by shorting something on the mainboard so i can delete all my data without having to buy a new battery and putting the phone back together?
Or if i could partially plug some parts together and connect it through USB port to a charger, enough for the phone to boot on recovery and erase through TWRP? Or do i need to plug everysingle thing (cameras, antenas, non essential stuff) in order for the phone to boot?
Thanks
Hi,
Please can anyone tell me whether the little connector on the vibration motor is supposed to be soldered to the motherboard or does it just touch at a certain place?
I've already posted another thread about having replaced the battery but it doesn't seem to charge.
Without going into details all over again, a local repair shop replaced the charging port last week - my phone was returned in seemingly working order but they had assured me a bulging battery was OK. I charged my phone but the battery was draining quickly, which was what led me to research a bit more and discovered how dangerous it can be so I ordered a new one.
In the process of fitting the new battery, I discovered half the screws in my phone missing, no copper tape, plus there is no black rubber cover over the charging port & vibration motor as is shown on the guide for replacing the battery on the fixit.com website.
So I'm wondering if the small square 'connecctor' (?) part of the vibration motor ought to be soldered to the motherboard or is it just normally held in place by the black rubber cover? In my phone now, the 'connector' doesn't stay touching motherboard so I'm not sure if this would affect the phone and stop it from functioning or would it just mean the vibration wouldn't work?
Would this affect whether the battery could charge or not?
(Incidentally, I discovered that the the battery connector was upside down compared to the pictures in the ifixit.com guide (the red wire was nearest to the battery instead of the black wire being nearest) so I was hopeful that by correcting it to match the picture, I would have solved the problem but unfortunately, it didn't make any difference. When I connect a wall charger, the screen just flashes and when I connect it to my laptop, it just gets a blinking white led but nothing more. It seems strange to me that it wouldn't make a difference - is it like a usb-c cable in that it can go either way round?)
The battery seller asked for photos of the new battery in my phone and has now offered to replace it - is this likely to make a difference or is the vibration motor not being attached to the motherboard the cause of the problem?
I'll be so grateful for some help.