Hi All,
I have the Canadian version of LG D803 (Bell). My phone had a custom recovery and rooted. So last night I got an OTA update and pressed to install by mistake, and went into and error related to a certificate... which fixed it using: http://forum.xda-developers.com/showthread.php?t=2582142
Since then I am able to boot into TWRP and adb works, but when I try to flash stock from Download mode, the usb is just not being detected... is my device gone? I just want to flash a stock image.
I tried on two windows 7 pcs with different usb cables but phone isn't detected. (got drivers / lg tool installed)
Please help!
Anyone?
Can this be happening because I flashed the following files from the Rogers ROM and not Bell (my phone), even though they are both 803 models?
aboot.img
rpm.img
sbl1.img
tz.img
Same here, my PC doesn't recognize my phone in download mode.
Any help?
BUMP
Related
Hey everyone I'm quite new to android, and I'm currently stuck in Download Mode after trying and failing to install Twrp
I was previously Rooted, tried to install Twrp via Autorec, however when I ran the app it soft-bricked my phone and put me into Fastboot mode.
I followed http://forum.xda-developers.com/show....php?t=2476972 method, and got back to Download Mode.
I am currently in the middle of returning to stock through http://forum.xda-developers.com/show....php?t=2432476 using the .TOT method.
I'm fairly close to repairing it but my only issue is that I cannot get my computer to recognize my phone. Neither in Device management nor adb devices anymore.
Therefore I cannot change the port to COM 41 to flash the .TOT file.
I constantly tried installing drivers for the phone both 3.10 and 3.08 but still no recognition can anybody help?
Some more info about the phone:
it's the D801 variant but its on Wind (Canada) not T-mobile
it was previously Rooted
it did not have any recovery software installed
no roms had been flashed previously.
Rogybear said:
Hey everyone I'm quite new to android, and I'm currently stuck in Download Mode after trying and failing to install Twrp
I was previously Rooted, tried to install Twrp via Autorec, however when I ran the app it soft-bricked my phone and put me into Fastboot mode.
I followed http://forum.xda-developers.com/show....php?t=2476972 method, and got back to Download Mode.
I am currently in the middle of returning to stock through http://forum.xda-developers.com/show....php?t=2432476 using the .TOT method.
I'm fairly close to repairing it but my only issue is that I cannot get my computer to recognize my phone. Neither in Device management nor adb devices anymore.
Therefore I cannot change the port to COM 41 to flash the .TOT file.
I constantly tried installing drivers for the phone both 3.10 and 3.08 but still no recognition can anybody help?
Some more info about the phone:
it's the D801 variant but its on Wind (Canada) not T-mobile
it was previously Rooted
it did not have any recovery software installed
no roms had been flashed previously.
Click to expand...
Click to collapse
Try to restore your phone using the official LGMobile Support Tool. Just switch on normally the phone, plug it to your PC and wait for your kdz to be downloaded. Once it done, it should install the kdz by itself. Then factory reset your phone (if needed) as it should ask you some pin/password.
Hope it'll help you as it did for me!
Hi Guys,
I brought my LG G2 D802 32GB last week and I believe it's possibly hard bricked if not soft bricked so let me start by saying that anyone who can help me get my brand new G2 working will be receiving some beer money!
I've owned over 15 android devices over the years and i'd say i'm a competent flasher but I've never had such a problem flashing any of those devices as I have on the G2!
So here's what I did:
1) Updated Phone to 4.4.2 and rotted using IOroot method (Root was successful)
2) Install LG USB Drivers
3) Flashed CWM 6.0.4.4 (Flashed successful and CWM was working fine with Root access on ROM)
I then decided to put TWRP as the recovery because after much research it seemed to be the most popular choice.
4) Downloaded D802_AutoRec.apk (I believe this was the correct recovery for my device)??
here's what happened:
After using AutoRec to flash TWRP recovery I rebooted and the phone displayed:
450 Fastboot mode started
500 udc_started()
Plugging in the USB cable then adds the following lines:
660 -reset-
670 -portchange-
740 fastboot; processing commands
Note that Download mode WAS available at this point.
I then tried flashing CWM recovery again through fastboot which showed as successful but still stuck in fastboot after rebooting. The same happened for TWRP.
I then went to the LG website, put in my IMEI number and downloaded the stock ROM (D80220C_00). I used the G2 extractor to extract the kdz to a DZ file then extracted the aboot/boot & laf.img. Since I did this I have lost download mode!
It's interesting to note that fastboot shows attached device as:
? fastboot
and ADB shows no attached devices.
I'm not sure this is relevant as I still seem to be able to push commands to the phone through fastboot?
I then tried to flash the stock ROM (D80220C_00) using LG Flash Tool however it gets to 27% and says "cannot connect to the phone
So as it stands at the moment all I have is the option to flash using fastboot, I have no download mode, no recovery or no working ROM. Have I completely bricked my phone or is there anything else I can try to get the stock ROM back on there?
Any help is massively appreciated!
Hello!
Try this, I hope it helps!
http://forum.xda-developers.com/showthread.php?t=2477595
thank you but I have and I still can't get into download mode....fastboot only
vPro97 said:
Hello!
Try this, I hope it helps!
Click to expand...
Click to collapse
I have a new and unique problem with my set Ls980 (LG G2). I dig down all xda and other forums from last week. But no use till now. So i need some good help from experts . Ok here is the situation . I have Lg g2 ls980 (sprint) i rooted it to flash some LP custom rom in it. i installed RECURRECTION REMIX LOLLIPOP ROM in it successfully along with it's gapps. After reboot i got my phone in boot loop. now the current situation is that
1- I have nothing on my phone everything wiped out. no rom backup or anything else on my phone memory.
2- I have stock recovery (pictures attached).
3- I have broken download mode. ( so i can't attach my phone to lg flash tool) picture attached.
4- I am stuck on boot loop with cm11 M5 ( last rom installed using adb sideload option from stock rom)
5- No fastboot mode.
Please guide me to recover my soft bricked phone.
Did you try Tot method? What happens when you plug your phone to pc? Does adb recognize your device?
ceza1380 said:
Did you try Tot method? What happens when you plug your phone to pc? Does adb recognize your device?
Click to expand...
Click to collapse
How can i try tot method without going to download mode ? as i said phone only have stock recovery , Yes there is an option in stock recovery "Apply update from ADB" by selecting that i can run adb sideload commands. And i can flash any zip rom from that option . I tried several rom's using this option but installation aborted in middle .
Does device manager in Windows recognize your device? In Tot method you do port settings to flash kdz. Also you can give it a try for LG pc suite.
My LG G2 d802 is stuck in the download mode and has no recovery. It happened when i flashed Miui 6 by gtbluesky after full wipe of data and system. Previously it was on cloudy 3.2 . After flashing the miui it wont boot and is in a bootloop on mi bootscreen. I tried but cannot boot into recovery seems like it doesnt have a recovery.
However, I can boot into download mode but it is not recognised in ADB nor Lg flash tool. I tried flashing kdz with the lg flash tool but it wont detect the device. I tried installing various drivers to the pc and also tried two different pc with windows 7. However, adb wont detect the device.
Regarding the drivers, the windows installs all the drivers but fails to install the LGE Androidnet usb modem drivers. If i manually try to install it from the lg drivers, it would keep installing and returns an error of timeout period expired.
So, i am stuck in the download mode with a bricked device.
If Someone could help me with this problem, i'll be much obliged. Thanks
SOLVED
[SOLVED] I downloaded the .tot file for my phone and extracted .dll from one of the .kdz & flashed it using the lg flash tool . It flashed good and now my g2 is up and running. :good:
Hello
I'm new here, I've been modding my lg a few times, always when bricked, kdz or tot files were saving me.
But now I've got real problem.
I was changing ROM from Cyanogen 13 to Cloudy 3.3. I thought I just need to flash rom via recovery (2.8.7.3 bump blastagator). Flashed fine, without any troubles, but when it came to reboot, phone just got stuck on LGs logo.
I knew i f*ed up.
Recovery isn't working, but Download Mode is turning on normally, at least it seems to.
So i tried to flash KDZ, but LG Flash Tool immedently shuts down giving "lg user...." error (don't remember what exacly it was saying).
Then i tried via tot files. But after installing drivers from tutorials, device isn't showed as "LGE AndroidNet USB Serial Port", but as few positions like MTP device or usb serial port(but not in Com ports) and all are marked as devices without drivers. Flash tool for tot also didn't worked here, because it did't found device.
What can i do now? Please help me.
[Edit]
So now, using different drivers somehow Jelly Bean installed by tot method (device didn't appeared as tutorial said, but it worked) phone is booting normally, but i can't again install lollipop with kdz files.
I was trying 3 different drivers, every giving instant error of flash tool.
What can I do now?
[EDIT2] LGUSERCSTool.exe is crashing. How can I install lollipop now?
Are there tot files for lollipop?