Guys! Is there any solution for my hard bricked 4033E Alcatel, i just formatted my sd card inserted to my phone through pc. and boom! My device wont turn on and even in recovery what to do? it is not also detected via pc
my phone is rooted and i flash custom rom via cwm recovery.
ace tumang said:
Guys! Is there any solution for my hard bricked 4033E Alcatel, i just formatted my sd card inserted to my phone through pc. and boom! My device wont turn on and even in recovery what to do? it is not also detected via pc
my phone is rooted and i flash custom rom via cwm recovery.
Click to expand...
Click to collapse
Do not worry. xposed I install my phone and did not return.The solution is the mobile update software. This program find it on the official website of alcatel looking for your specific model, install it on the pc, and is responsible for flashing the phone. All is not lost.Sorry my bad english.
:laugh::laugh::laugh:
Related
I formated my sd card from recovery-windows and i got a bootloop when i rebooted it.
No more access to recovery-windows, i took off my sd card, bootloop again, i had to go to recovery with red triangle, pull off battery, disconnect from usb and reboot to make it work.
Factory is reset but no more network even with proper settings, and i can't access the recovery windows without having bootloop all over again. I got a mysterious IMEI SV number now too.
Strange things is the drivers are mad in hboot and recovery now , i got something like this.
I don't understand what went wrong, can someone point me in the right direction to make it work?
is your phone rooted?
shara6 said:
is your phone rooted?
Click to expand...
Click to collapse
Yes, with blay0 0.7 currently on it.
So the network came back after one complete day without it. Don't ask me why.
But i have other major issues:
-SD Card slot not recognize, tested with different SD cards, same result.
-Bootloop when i boot my phone, only way to get around it is to plug it in usb, don't ask me why too.
-Weird Drivers still nuts with HTC DIAG, Qualcomm CDMA Technology not recognize.
I didn't know a simple SD card format from recovery can cause so much trouble :'(
Undoubtly the native drivers from Hboot disappeared, and without sd card nor recovery from PC, i don't know how to bring them back.
Can someone help me please, i don't want to lose it :'(
Okay it's a classic USB Brick sorry for the inconvenience.
TL;DR Rooted my LG Optimus l7 (P705g), installed CM10, didn't work that well, tried to flash the stock rom onto my phone and now my phone is bricked! Please help!
Yesterday I flashed V20A_00.KDZ onto my phone, and I successfully managed to root my phone and install the official jellybean release, but it was slow and I didn't like it that much. So I decided to install CM10 onto my phone with Rom Manager and Clockwork Mod, and it bricked my phone. I flashed the V20A_00 back onto my phone and it worked. I tried to install CM10 again, and this time it worked. However it couldn't recognize my SIM card or something, and I couldn't connect to any mobile network. So I tried to flash V20A_00 onto my phone again except it didn't work and now my phone is bricked. I have tried to flash it like 10 times and it never works, it just gets stuck at the boot animation. I am using KDZ_FW_UPD to flash the roms, and I have ran in administrator, put my phone into emergency mode, set type to 3GQCT and phone mode to EMERGENCY. I have tried to flash V10E_00 onto my phone as well but it won't work. Please help, I really really really need my phone. If I haven't provided enough info, I can provide more
JonXDAaccount said:
TL;DR Rooted my LG Optimus l7 (P705g), installed CM10, didn't work that well, tried to flash the stock rom onto my phone and now my phone is bricked! Please help!
Yesterday I flashed V20A_00.KDZ onto my phone, and I successfully managed to root my phone and install the official jellybean release, but it was slow and I didn't like it that much. So I decided to install CM10 onto my phone with Rom Manager and Clockwork Mod, and it bricked my phone. I flashed the V20A_00 back onto my phone and it worked. I tried to install CM10 again, and this time it worked. However it couldn't recognize my SIM card or something, and I couldn't connect to any mobile network. So I tried to flash V20A_00 onto my phone again except it didn't work and now my phone is bricked. I have tried to flash it like 10 times and it never works, it just gets stuck at the boot animation. I am using KDZ_FW_UPD to flash the roms, and I have ran in administrator, put my phone into emergency mode, set type to 3GQCT and phone mode to EMERGENCY. I have tried to flash V10E_00 onto my phone as well but it won't work. Please help, I really really really need my phone. If I haven't provided enough info, I can provide more
Click to expand...
Click to collapse
Use adb from computer and flash ROM over hopefully it will show device connected to windows computer hope you have used ASB and downloaded drivers and did a backup.
culaterout said:
Use adb from computer and flash ROM over hopefully it will show device connected to windows computer hope you have used ASB and downloaded drivers and did a backup.
Click to expand...
Click to collapse
Could you explain how to flash a ROM over it with adb, I've used it before but only for unlocking the bootloader. Also I have a backup, but would I have to turn it into a zip? And what is ASB?
Hello
I attempted to flash my Zte l2 with cwm recovery however i flashed a recovery which wasn't compatible with the phone. The recovery started installing then just got stuck in a loop. The phone refused to boot even after i reset it and kept going back to the loop. I then attempted to flash the phone with the stock rom which i downloaded from the website with sp flash tool however it kept saying it the scatter file wasn't supported. I have tried several scatter files and now my phone isnt even turning on at all. The phone is still recognized by my computer as it make a beep sound when plugged in and it is also still recognized by the SP flash tool. Is there any hope ? Can anyone provide me with a rom or scatter file which will work. Just bought the phone two days ago and it would be a shame if its dead weight..
Thank you
desrhodes said:
Hello
I attempted to flash my Zte l2 with cwm recovery however i flashed a recovery which wasn't compatible with the phone. The recovery started installing then just got stuck in a loop. The phone refused to boot even after i reset it and kept going back to the loop. I then attempted to flash the phone with the stock rom which i downloaded from the website with sp flash tool however it kept saying it the scatter file wasn't supported. I have tried several scatter files and now my phone isnt even turning on at all. The phone is still recognized by my computer as it make a beep sound when plugged in and it is also still recognized by the SP flash tool. Is there any hope ? Can anyone provide me with a rom or scatter file which will work. Just bought the phone two days ago and it would be a shame if its dead weight..
Thank you
Click to expand...
Click to collapse
Try to flash recovery(I uploaded mine for you using adb and fastboot commands
if it don't work try to flash boot(extract it from update package from ZTE support site) or update.zip
I'm not a robot
Funtast said:
Try to flash recovery(I uploaded mine for you using adb and fastboot commands
if it don't work try to flash boot(extract it from update package from ZTE support site) or update.zip
Click to expand...
Click to collapse
hi funtast
just to ask if your recovery stock or something better than default Chinese recovery also are you using a virgin branded ZTE blade l2 thanks in advance add I take time before I flash any new phone thanks again
desrhodes said:
Hello
I attempted to flash my Zte l2 with cwm recovery however i flashed a recovery which wasn't compatible with the phone. The recovery started installing then just got stuck in a loop. The phone refused to boot even after i reset it and kept going back to the loop. I then attempted to flash the phone with the stock rom which i downloaded from the website with sp flash tool however it kept saying it the scatter file wasn't supported. I have tried several scatter files and now my phone isnt even turning on at all. The phone is still recognized by my computer as it make a beep sound when plugged in and it is also still recognized by the SP flash tool. Is there any hope ? Can anyone provide me with a rom or scatter file which will work. Just bought the phone two days ago and it would be a shame if its dead weight..
Thank you
Click to expand...
Click to collapse
hi the best option that worked for me involved downloading the latest sp-flash tool and a copy of the best rom from needroms pick the one with the highest star rate start spflash click the scatter file from the rom you found on needroms make sure your mobile isn't connected at this point plug your usb cable in the pc side take the other end of the usb take your moble hold down your volume down key connect the usb then after a second your mobile will begin to flash and yor mobile will work you will also need to download the stock rom and reflash from zte and update your mobile the stock way as the rom you have from needroms is only used to get your phone operational but will not work with your sim unless the mobile was previously unlocked to all networks then you could just leave the needroms version on but if your sim doesn't work you will need to copy the correct stock rom from zte to your sd card once you have the mobile restored and reflash it using normal method it will reflash and your nasty virgin sim will work again hope this helps
MAXMICK69 said:
hi the best option that worked for me involved downloading the latest sp-flash tool and a copy of the best rom from needroms pick the one with the highest star rate start spflash click the scatter file from the rom you found on needroms make sure your mobile isn't connected at this point plug your usb cable in the pc side take the other end of the usb take your moble hold down your volume down key connect the usb then after a second your mobile will begin to flash and yor mobile will work you will also need to download the stock rom and reflash from zte and update your mobile the stock way as the rom you have from needroms is only used to get your phone operational but will not work with your sim unless the mobile was previously unlocked to all networks then you could just leave the needroms version on but if your sim doesn't work you will need to copy the correct stock rom from zte to your sd card once you have the mobile restored and reflash it using normal method it will reflash and your nasty virgin sim will work again hope this helps
Click to expand...
Click to collapse
PUNCTUATION!!!!!! This is illegible!
Hey, I have bricked my tablet. I have the 560NU I believe. It was running 7.1.1 and I decided to root it. I successfully rooted it and it was fine. Then I lost root and tried to reboot the tablet. It would get to the logo screen and stop. I can get to the twrp screen. I tried several things but must have wiped everything off the tablet and sd card. It says no OS now. It also wont be recognized by the computer. The computer will recognize the sd card. Can I recover my tablet. Could I put a OS on the sd card. Thanks for the help
Yes, since you can boot into recovery. Use the computer to put zip files on either the SD card or a USB stick if you have an OTG cable. Put either into the tablet, boot into recovery, do an advanced wipe, then install the zip files. There are a few options apart from the factory one, see the development with T560NU in the title:
https://forum.xda-developers.com/galaxy-tab-e/development
For example there's LineageOS 15.1 for your tablet.
Bricked Samsung
SMT560 said:
Yes, since you can boot into recovery. Use the computer to put zip files on either the SD card or a USB stick if you have an OTG cable. Put either into the tablet, boot into recovery, do an advanced wipe, then install the zip files. There are a few options apart from the factory one, see the development with T560NU in the title:
https://forum.xda-developers.com/galaxy-tab-e/development
For example there's LineageOS 15.1 for your tablet.
Click to expand...
Click to collapse
I have tried a few zips but each time it says device is unknown. Its a Samsung galaxy tab e sm-t560nu im sure. I bought it from Walmart. Wonder why its saying device unknown when trying to flash. thanks for the help
Millcreek1966 said:
I have tried a few zips but each time it says device is unknown. Its a Samsung galaxy tab e sm-t560nu im sure. I bought it from Walmart. Wonder why its saying device unknown when trying to flash. thanks for the help
Click to expand...
Click to collapse
At what point does it say "device unknown"?
Hello, Dear XDA-Developers.
I was trying some custom ROMs but when I installed Viper4Android and flashed it using Magisk the phone stucks on boot
However I have another problem, I found out that the internal storage of my phone got too small after upgrading into another version of Android, so I wanted to get back to Android 5 stock firmware completed to format the internal storage and not partitioning it as I thought so I tried to flash it in TWRP recovery but sadly after that I bricked the bootloader and the recovery. Next, I decided to flash a board image ALE-L02&L21&L23_MAA001077_Board_Software_general_05021SJN using IMAGE Download Software - IDTML01Ver1001, Still, the process got interrupted maybe because the phone was restarting itself and now I'm getting a screen that shows error after showing Huawei Ascend logo. Is there any chance to fix this dead phone but consider that my pc is no longer detecting the driver that I used to flash the board image, and I can't even turn off the phone now except if I let the battery dies.
Notice: I don't dare to use test points if there is no other choice how much it usually costs to fix it?