Database Users

Newest camera 2.70.0.21104 and modified album

Hi,
Just wanted to share the latest camera app with you.
Originaly it was a german version but I made it english.
Also I changed album.exe and put a Exit command in the
menu.
First you need to install Camera_Wizard_Magician_T-Mobile_WWE_RC28_Customize.CAB
Then overwrite both camera.exe, album_res.dll and album.exe from camera_album.zip.
These 3 files are upx-ed to save memory.
The camera.exe is from Camera_Wizard_Magician_T-Mobile_GER_RC29_Customize.cab (version 2.70.0.21104)
One thing that still is bad is when the camera ambience is in Auto.
It still is not working as it should. Better operate the Ambience in
DayLight or Night mode.
The magician can have 2 kinds of image sensors. Mine uses hklm\drivers\builtin\camera_sensor1.
You can fiddle with the LightSensorHz a bit. Default it is set to "50" but you can try "0" or "100".
Could not find much difference.
You can check which camera_sensor driver is active by going into
hklm\driver\active and look for Name: CAM1: or CAM2: (CAM2: in my case at key 25)
Some other camera related tweaks (decimal dwords):
hklm\software\drivers\camera\Property\02 (or 01 in case of CAM1
brightness 6
contrast 5
hue 5
saturation 4
sharpness 6
hklm\software\HTC\Camera\AppDefSettings
country 2 determines the display rotation on camera start
flashlight 0 can be set to 1 but you don´t have one
hklm\software\HTC\Camera\AppDefSettings\common
fontcolor 00ff00 rgb values for osd
keycolor 080c08 rgb
hklm\software\HTC\Camera\AppDefSettings\general
brightness 6
contrast 5
hue 5
saturation 4
sharpness 6
EnableCallBack 1 some calibration value osd
EnableFrameRate 1 osd actual framerate
EnableDayTimePath 0 creates subdirs in my documents\my pictures if 1
EnableHopper 0 test/debug program called hopper.exe
EnableIPSM 0 enable IP Streaming Media, never got it workin anyhow
hklm\software\HTC\Camera\captparam
captureduration 60 force recording time to be 60 seconds
delaytime 10 dunno. 10 ms calibration time before recording starts?
savethesamename 0 for debugging, always save recording under same name (debugsometing)
hklm\software\HTC\Camera\general
brightness 6
contrast 5
hue 5
saturation 4
sharpness 6
hklm\software\HTC\Camera\RecParam\general
audiobufcount 30 nr of audiobuffers
enablemp4vdodupl 1 dunno
videobufcount 8 default is 4 (max is 8)
hklm\software\HTC\Camera\RecParam\3gpsmall
hklm\software\HTC\Camera\RecParam\3gpmedium
hklm\software\HTC\Camera\RecParam\avismall
hklm\software\HTC\Camera\RecParam\avimedium
hklm\software\HTC\Camera\RecParam\avilarge
hklm\software\HTC\Camera\RecParam\mp4small
hklm\software\HTC\Camera\RecParam\mp4medium
hklm\software\HTC\Camera\RecParam\mp4large
cachesize 8192 default is 4096, add to all 8 keys listed above
All settings for camera and album are stored in the key
hkcu\software\IA Style\IA CameraWizard(Pocket PC)
The camera app is version 2.70 the album is 2.51
You can remove the keys like preferences and strings or UI info to reset
the default values.
hklm\software\HTC\Album\DisableEditor
Disable 0
EDIT: 4 apr
Command line options for camera.exe, so you can make shortcuts yourself.
-c or /c perhaps assign to contact (if you have smartdial/iacontacts installed)
-i or /i switch to photo mode
-m or /m switch to mms video mode
-p or /p switch to contact photo
-t or /t switch to picture theme mode
-v ot /v switch to video mode
Still looking for a way to enable rotation and the paint appl in the editor.
In the resource file the images are there (see attachements)
EDIT 5 apr.
The UI interface mechanism is getting clear. If you put album_res.dll (a resource file) in ResourceHacker you
wil find the BMP section of the resources. The BMP i´m interested in is 920 (see attachement below).
If you count the number of icons in that picture you get 10.
Now goto the 241 section. There you will find a 920 resource too. It reads:
01 00 10 00 0F 00 0A 00 0C 91 0D 91 0E 91 0F 91 F9 8C 28 8D 29 8D 2A 8D 2B 8D 18 91
(there is a bug in resourcehacker that doesn´t show the last pair of digits of a 241 resource)
Look complicated at first look. But it isn´t. Lets try:
01 00 10 00 0F 00 = always the same in every 241 resource
0A 00 = 00A0 is 10, so then commands/function id´s follow
0C 91 = 910C = 37132, and is the command for PAN (remember the first icon
in the 920 BMP?)
So (see album_res_920_1033.bmp):
910C is PAN
910D is CROP
910E is RESIZE
910F is COLOR ADJUST
8CF9 is SAVE (dec 36089, and can be found with Resource Hacker in
resource 242 in the Menu section, named Save ;O)
8D28 is ROTATE CLOCKWISE
8D29 is ROTATE ANTI CLOCKWISE
8D2A is MIRROR HORIZONTALY
8D2B is MIRROR VERTICALY
9118 is goto PAINT menu
To be continued
Anybody found a newer version for wm2003se?
Happy tweaking!

Thanks for this

thanks
but IMHO coolcamera anyway is much better than a default one

hi shoonari... i agree, but can u help me find the latest ver. of coolcamera and its cr**k?

here it is

A bit late, But it works nicely.
Thnx

How to make a shortcut to settings?

Trying to figure out how to make a shortcut to settings. When you browse to the settings folder in file explorer and open it it's empty. I don't want to open individual .cpl's I would like to emulate what happens when you hit "settings" on the start menu and open the settings window. Thanks.

juiceppc said:
Trying to figure out how to make a shortcut to settings. When you browse to the settings folder in file explorer and open it it's empty. I don't want to open individual .cpl's I would like to emulate what happens when you hit "settings" on the start menu and open the settings window. Thanks.
Click to expand...
Click to collapse
i have been searching for this too, but i didnt find it
i dont know if its possibe

Done it but not certain how!
I have done this before - using VJKeypress you can simulate a keypress in a shortcut which takes you straight to Settings. I can't remember which it was (probably ctl+alt+something lol) but it did work.
Dig around and you'll have it working soon.

littld said:
I have done this before - using VJKeypress you can simulate a keypress in a shortcut which takes you straight to Settings. I can't remember which it was (probably ctl+alt+something lol) but it did work.
Dig around and you'll have it working soon.
Click to expand...
Click to collapse
Here's the keycode list. Any of these ring a bell?
VK_LBUTTON 1
VK_RBUTTON 2
VK_CANCEL 3
VK_MBUTTON 4
VK_XBUTTON1 5
VK_XBUTTON2 6
VK_BACK 8
VK_TAB 9
VK_CLEAR 12
VK_RETURN 13
VK_SHIFT 16
VK_CONTROL 17
VK_CTRL 17
VK_MENU 18
VK_PAUSE 19
VK_CAPITAL 20
VK_HANGEUL 21
VK_HANGUL 21
VK_KANA 21
VK_JUNJA 23
VK_FINAL 24
VK_HANJA 25
VK_KANJI 25
VK_ESCAPE 27
VK_CONVERT 28
VK_NONCONVERT 29
VK_ACCEPT 30
VK_MODECHANGE 31
VK_SPACE 32
VK_PRIOR 33
VK_NEXT 34
VK_END 35
VK_HOME 36
VK_LEFT 37
VK_UP 38
VK_RIGHT 39
VK_DOWN 40
VK_SELECT 41
VK_PRINT 42
VK_EXECUTE 43
VK_SNAPSHOT 44
VK_INSERT 45
VK_DELETE 46
VK_HELP 47
VK_0 48
VK_1 49
VK_2 50
VK_3 51
VK_4 52
VK_5 53
VK_6 54
VK_7 55
VK_8 56
VK_9 57
VK_A 65
VK_B 66
VK_C 67
VK_D 68
VK_E 69
VK_F 70
VK_G 71
VK_H 72
VK_I 73
VK_J 74
VK_K 75
VK_L 76
VK_M 77
VK_N 78
VK_O 79
VK_P 80
VK_Q 81
VK_R 82
VK_S 83
VK_T 84
VK_U 85
VK_V 86
VK_W 87
VK_X 88
VK_Y 89
VK_Z 90
VK_LWIN 91
VK_RWIN 92
VK_APPS 93
VK_SLEEP 95
VK_NUMPAD0 96
VK_NUMPAD1 97
VK_NUMPAD2 98
VK_NUMPAD3 99
VK_NUMPAD4 100
VK_NUMPAD5 101
VK_NUMPAD6 102
VK_NUMPAD7 103
VK_NUMPAD8 104
VK_NUMPAD9 105
VK_MULTIPLY 106
VK_ADD 107
VK_SEPARATOR 108
VK_SUBTRACT 109
VK_DECIMAL 110
VK_DIVIDE 111
VK_F1 112
VK_F2 113
VK_F3 (green key) 114
VK_F4 115
VK_F5 116
VK_F6 117
VK_F7 118
VK_F8 119
VK_F9 120
VK_F10 121
VK_F11 122
VK_F12 123
VK_F13 124
VK_F14 125
VK_F15 126
VK_F16 127
VK_F17 128
VK_F18 129
VK_F19 130
VK_F20 131
VK_F21 132
VK_F22 133
VK_F23 134
VK_F24 135
VK_NUMLOCK 144
VK_SCROLL 145
VK_OEM_FJ_JISHO 146
VK_OEM_NEC_EQUAL 146
VK_OEM_FJ_MASSHOU 147
VK_OEM_FJ_TOUROKU 148
VK_OEM_FJ_LOYA 149
VK_OEM_FJ_ROYA 150
VK_LSHIFT 160
VK_RSHIFT 161
VK_LCONTROL 162
VK_RCONTROL 163
VK_LMENU 164
VK_RMENU 165
VK_BROWSER_BACK 166
VK_BROWSER_FORWARD 167
VK_BROWSER_REFRESH 168
VK_BROWSER_STOP 169
VK_BROWSER_SEARCH 170
VK_BROWSER_FAVORITES 171
VK_BROWSER_HOME 172
VK_VOLUME_MUTE 173
VK_VOLUME_DOWN 174
VK_VOLUME_UP 175
VK_MEDIA_NEXT_TRACK 176
VK_MEDIA_PREV_TRACK 177
VK_MEDIA_STOP 178
VK_MEDIA_PLAY_PAUSE 179
VK_LAUNCH_MAIL 180
VK_LAUNCH_MEDIA_SELECT 181
VK_LAUNCH_APP1 182
VK_LAUNCH_APP2 183
VK_OEM_1 186
VK_OEM_PLUS 187
VK_OEM_COMMA 188
VK_OEM_MINUS 189
VK_OEM_PERIOD 190
VK_OEM_2 191
VK_OEM_3 192
VK_OEM_4 219
VK_OEM_5 220
VK_OEM_6 221
VK_OEM_7 222
VK_OFF (power off) 223
VK_OEM_AX 225
VK_OEM_102 226
VK_ICO_HELP 227
VK_ICO_00 228
VK_PROCESSKEY 229
VK_ICO_CLEAR 230
VK_PACKET 231
VK_OEM_RESET 233
VK_OEM_JUMP 234
VK_OEM_PA1 235
VK_OEM_PA2 236
VK_OEM_PA3 237
VK_OEM_WSCTRL 238
VK_OEM_CUSEL 239
VK_DBE_ALPHANUMERIC 240
VK_OEM_ATTN 240
VK_DBE_KATAKANA 241
VK_OEM_FINISH 241
VK_DBE_HIRAGANA 242
VK_OEM_COPY 242
VK_DBE_SBCSCHAR 243
VK_OEM_AUTO 243
VK_DBE_DBCSCHAR 244
VK_OEM_ENLW 244
VK_DBE_ROMAN 245
VK_OEM_BACKTAB 245
VK_ATTN 246
VK_DBE_NOROMAN 246
VK_CRSEL 247
VK_DBE_ENTERWORDREGISTERMODE 247
VK_DBE_ENTERIMECONFIGMODE 248
VK_EXSEL 248
VK_DBE_FLUSHSTRING 249
VK_EREOF 249
VK_DBE_CODEINPUT 250
VK_PLAY 250
VK_DBE_NOCODEINPUT 251
VK_ZOOM 251
VK_DBE_DETERMINESTRING 252
VK_NONAME 252
VK_DBE_ENTERDLGCONVERSIONMODE 253
VK_PA1 253
VK_OEM_CLEAR 254

littld said:
I have done this before - using VJKeypress you can simulate a keypress in a shortcut which takes you straight to Settings. I can't remember which it was (probably ctl+alt+something lol) but it did work.
Dig around and you'll have it working soon.
Click to expand...
Click to collapse
I tried this software but only the follo no. worked
223 Power Off
27 Escape
91 Start Menu
93 Context Menu
112 Left Soft Key
113 Right Soft Key
133 Device Lock (WM5 only)
I was looking also to get setting & Program menu shortcuts
Can some one help.

I looked
I looked at the list but can't remember which - I think I'd set up a macro and incremented by one each time with the number to see what they all did. It's a long time ago!
I do know for a fact that there is a keyboard shortcut to the Settings window and it works perfectly.
Bad news - there is no such way to get to the Programs screen. I did write a little app which could call it (thought the Start menu) but I can't find it.
Good luck.

maybe here are what you are looking for.................

medkid said:
maybe here are what you are looking for.................
Click to expand...
Click to collapse
Thankyou medkid

Anyone can help me with VJKeypress
I want to use FtouchFlo from Efrost to emulate keypress (from D-pad) right and left.

check here :
http://www.xs4all.nl/~itsme/projects/xda/xda-controlpanel.html

sudist said:
Anyone can help me with VJKeypress
I want to use FtouchFlo from Efrost to emulate keypress (from D-pad) right and left.
Click to expand...
Click to collapse
I PM Vj but no reply yet.
Thanks u guys 4 ur help,
I still do not know how to shortcut 2 Program & setting menu
ie Start - Program
Or Start - Setting
This needed 4 FtouchFlo 2 gesture from left to right - right to left.

I was looking for this for ages with no luck.
Recently installed Wisbar Advance 3, was playing about with linking up my desktop icons and found that it can be done...
hold tap on an icon, properties, set path to executable as:
\Program Files\Lakeridge\Wisbar Advance 3\Control.exe
this will bring up the Settings page as normal.
(another tip- in the same folder as that .exe is StartPanel.exe, check that one out if you want a funky looking full-page version of your regular Start menu)
not sure if this is the same in earlier versions of Wisbar, but i thought I'd mention it if any of you have the program, and there was also a way of doing the same thing in iLauncher. hope this helps somebody...

Dr J, thanks for the tip, I have pocket plus 4 and wisbar 3, so it is perfect for a shortcut to open the settings panel.

6 side cube

I have made my cube with 6 sides but now i want to make the sliding of the cubes with my new icons.
When i open my registery and when i look in HKLM - software - HTC - Biotouch - Boitouch -
i copied the values Cube 2 and renamed it to Cube 3 - Cube 4 and Cube 5.
The original Cube 3 i renamed as Cube 6.
When i now slide my cube and go from the phone screen to the mediahub screen it is ok, form the mediahub sceen to the 1ste app screen is ok, but form the 2° - 3° and 4° app screen i got the same pictures as form the 1ste app.
I look at the values in the Cube and i notice that in Cube 2 there is :
07 07 08 09 0A 0B 0C 0D
0A C8 C9 CA CB 18 19 1A
1B 1C 07
Since i copied Cube 3 - 4 and 5 with the same values as cube 2 the values are the same.
In my cube 6 (original cube 3) i have these values :
07 0D 0E 0F 10 11 12 01
0A C8 C9 CA CB 1D 1E 1F
20 21 0D
I have already figured out what the numbers 01 till 33 are (they are also in the same register and have values for moves of the cube)
I made new strings form 34 till 66 with the values for the moves of the other cubes.
I can't figure out what the other things will mean like 0A 0B 0C 0D
0A C8 C9 CA CB
Can someone help me to make my 6 cube slide with my new icons on it?
Thanks

This would be an interesting find... * bump *

hefi said:
I have made my cube with 6 sides but now i want to make the sliding of the cubes with my new icons.
When i open my registery and when i look in HKLM - software - HTC - Biotouch - Boitouch -
i copied the values Cube 2 and renamed it to Cube 3 - Cube 4 and Cube 5.
The original Cube 3 i renamed as Cube 6.
When i now slide my cube and go from the phone screen to the mediahub screen it is ok, form the mediahub sceen to the 1ste app screen is ok, but form the 2° - 3° and 4° app screen i got the same pictures as form the 1ste app.
I look at the values in the Cube and i notice that in Cube 2 there is :
07 07 08 09 0A 0B 0C 0D
0A C8 C9 CA CB 18 19 1A
1B 1C 07
Since i copied Cube 3 - 4 and 5 with the same values as cube 2 the values are the same.
In my cube 6 (original cube 3) i have these values :
07 0D 0E 0F 10 11 12 01
0A C8 C9 CA CB 1D 1E 1F
20 21 0D
I have already figured out what the numbers 01 till 33 are (they are also in the same register and have values for moves of the cube)
I made new strings form 34 till 66 with the values for the moves of the other cubes.
I can't figure out what the other things will mean like 0A 0B 0C 0D
0A C8 C9 CA CB
Can someone help me to make my 6 cube slide with my new icons on it?
Thanks
Click to expand...
Click to collapse
Why don´t probe this program: http://ww2.fatattitude.com/software/...?view=download and see??

v1zca1n0 said:
Why don´t probe this program: http://ww2.fatattitude.com/software/...?view=download and see??
Click to expand...
Click to collapse
Can't seem to get it work on my cruise. I tried to shut down the MediaHubMini.exe with SKTools but don't really know if it worked.. (don't really know how this tool works).
I think i got is shut down, but when i start the touchsetting programma i get error message.

hefi said:
Can't seem to get it work on my cruise. I tried to shut down the MediaHubMini.exe with SKTools but don't really know if it worked.. (don't really know how this tool works).
I think i got is shut down, but when i start the touchsetting programma i get error message.
Click to expand...
Click to collapse
Use to work with no problem. Install in Main Memory instead SD and try. If you can work is very intuitive and you are going to see very fast how to change the Cube. Say me something

v1zca1n0 said:
Use to work with no problem. Install in Main Memory instead SD and try. If you can work is very intuitive and you are going to see very fast how to change the Cube. Say me something
Click to expand...
Click to collapse
I tried it a different ways but i can't get it work on my cruise. I also tried the manual installation but it won't work.

hefi said:
I tried it a different ways but i can't get it work on my cruise. I also tried the manual installation but it won't work.
Click to expand...
Click to collapse
Very strange I have already install and working and I have a Cruise with spanish ROM cocked by Christonge and download in this forum I will try your trick for 6 sides and, after, try to work with the program and I will tell my experience

v1zca1n0 said:
Very strange I have already install and working and I have a Cruise with spanish ROM cocked by Christonge and download in this forum I will try your trick for 6 sides and, after, try to work with the program and I will tell my experience
Click to expand...
Click to collapse
ok thanks, let me know....

Settings needed (I messed up)

In trying to adjust how long the the screen goes blank and how long before it locks, I must have messed up some settings in
/data/data/com.motorola.android.providers.settings/databases/settings.db
I am looking for values for entries 65-71

65
notification_led_voicemail_enabled
1
66
screen_lock
1
67
screen_off_timeout_max
-1
68
lock_pin_min_chars
4
71
lock_timer_max
1200000
(There is no 69 and 70 in my file)

Thread closed
thanks for the info

Simple class for encryption

Here is a simple class for encrypting strings. As we should all know, encryption is important, especially for things like login forms, personal user data etc. Therefore it is important that if you are storing such information either locally on the device or sending it to a remote server, you encrypt such details.
This class uses the SHA-512 hashing algorithm to convert a string into its raw bit format. This is then converted into a hex string and returned.
There are ways of making this even more secure (by adding salts etc) but this is just meant to be for a starting point
Code:
public class Crypto {
final protected static char[] hexArray = "0123456789ABCDEF".toCharArray();
private static String convertToHex(byte[] bytes) {
char[] hexChars = new char[bytes.length * 2];
for (int j = 0; j < bytes.length; j++) {
int v = bytes[j] & 0xFF;
hexChars[j * 2] = hexArray[v >>> 4];
hexChars[j * 2 + 1] = hexArray[v & 0x0F];
}
return new String(hexChars);
}
public static String SHA512(String text) throws NoSuchAlgorithmException, UnsupportedEncodingException {
MessageDigest md = MessageDigest.getInstance("SHA-512");
md.update(text.getBytes("iso-8859-1"), 0, text.length());
byte[] sha512hash = md.digest();
return convertToHex(sha512hash);
}
}
Usage:
Code:
String example = "example";
try {
example = Crypto.SHA512(example);
} catch (NoSuchAlgorithmException e) {
e.printStackTrace();
} catch (UnsupportedEncodingException e) {
e.printStackTrace();
}

Thanks a lot, exactly what i have been looking for yesterday, must have been reading my thoughts ;P
Just one question, how to revert the hex to the normal text version again
---------------------------------
Phone : Nexus 4
OS:
Pure KitKat 4.4.2 stock, no root, no mods
---------------------------------
4d 61 73 72 65 70 75 73 20 66 74 77
Gesendet von Tapatalk

Masrepus said:
Thanks a lot, exactly what i have been looking for yesterday, must have been reading my thoughts ;P
Just one question, how to revert the hex to the normal text version again
Click to expand...
Click to collapse
The SHA algorithm used here is intended to and can only be used one way. So basically the user enters his password which is encrypted by the method above and the hex string is then saved. Each time the user wants to login, the password he entered is encrypted again. If the hex string matches the saved one the user gains access.
This method is very secure as there is no way to uniquely decode the password from the hex string.

SimplicityApks said:
The SHA algorithm used here is intended to and can only be used one way. So basically the user enters his password which is encrypted by the method above and the hex string is then saved. Each time the user wants to login, the password he entered is encrypted again. If the hex string matches the saved one the user gains access.
This method is very secure as there is no way to uniquely decode the password from the hex string.
Click to expand...
Click to collapse
^ This. How I use it is for GCM notifications for the app for my school. Users register for push notifications for different year groups (eg year 7, year 8 etc) using their email (mandatory as this is used for some mysql enquiries server side) and real name (optional). Obviously I don't want these showing in plain text format if the website/database is compromised so the information needed to be encrypted before stored in the remote database.
In addition to that I didn't want the plain text information being intercepted whilst being sent to the server so I encrypted it locally using this class then send to the server - it also means that I can still use this to run mysql enquiries on the hashed email string
Sent from my HTC One using Tapatalk

Ah okay i understand
---------------------------------
Phone : Nexus 4
OS:
Pure KitKat 4.4.2 stock, no root, no mods
---------------------------------
4d 61 73 72 65 70 75 73 20 66 74 77
Gesendet von Tapatalk

Code updated with a better way of converting the bytes to hex string - adapted from maybeWeCouldStealAVan's method @ stackoverflow