Related
Hello, i have searched the forums for a flashable firmware upgrade from 4.2.2 to 4.3 for my sgs4 (i9506) and can't find it anywhere, could someone please locate me to the correct directions or atleast tell me something working? Thanks
mattish.91 said:
Hello, i have searched the forums for a flashable firmware upgrade from 4.2.2 to 4.3 for my sgs4 (i9506) and can't find it anywhere, could someone please locate me to the correct directions or atleast tell me something working? Thanks
Click to expand...
Click to collapse
Check sammobile.com then firmware for ur phone. Have a nice day
Sent from my Phone.
Edit: or here http://www.sammobile.com/firmwares/2/
Repulsa said:
Check sammobile.com then firmware for ur phone. Have a nice day
Sent from my Phone.
Click to expand...
Click to collapse
I just flashed the "I9506XXUBML5_I9506FTMBML1_I9506XXUBMK7_HOME.tar.md5" and i get "failed" and now i can't acces my phone, only download mode... please help
mattish.91 said:
I just flashed the "I9506XXUBML5_I9506FTMBML1_I9506XXUBMK7_HOME.tar.md5" and i get "failed" and now i can't acces my phone, only download mode... please help
Click to expand...
Click to collapse
Download odin 3.09 then select PDA, and find the file you download now connect the one cable to your PC and press power+volume down to your phone until u reach download mode and connect the other cable to your phone and click start.
Edit: Dont root your device you might Void your warranty after updating.
mattish.91 said:
Hello, i have searched the forums for a flashable firmware upgrade from 4.2.2 to 4.3 for my sgs4 (i9506) and can't find it anywhere, could someone please locate me to the correct directions or atleast tell me something working? Thanks
Click to expand...
Click to collapse
What u flashed is only for France Orange branded. They dont have 4.3 for others still
Repulsa said:
Download odin 3.09 then select PDA, and find the file you download now connect the one cable to your PC and press power+volume down to your phone until u reach download mode and connect the other cable to your phone and click start.
Edit: Dont root your device you might Void your warranty after updating.
Click to expand...
Click to collapse
Read this .. http://forum.xda-developers.com/showthread.php?t=2582135&page=2
---------- Post added at 02:12 AM ---------- Previous post was at 02:12 AM ----------
mattish.91 said:
I just flashed the "I9506XXUBML5_I9506FTMBML1_I9506XXUBMK7_HOME.tar.md5" and i get "failed" and now i can't acces my phone, only download mode... please help
Click to expand...
Click to collapse
Read this..... http://forum.xda-developers.com/showthread.php?t=2582135&page=2
If you do really want to upgrade after you read the upper report i can help you cause Odin and Heimdall are no more supported and you cant downgrade anymore to 4.2.2
So think about it twice
And please read here too http://forum.xda-developers.com/showpost.php?p=45666586&postcount=1 ^^
I got 5 buttons in odin and no one says "PDA" i know it's not "PIT" and the other ones are "BL, AP, CP, CSC" i guess it should be "AP" since that button is in the same place as "PDA" should be, and i still get failed when using Heimdall, i have also tried to download root, but since the download speed is so damn low from that site i cant get it... what am i doing wrong?
This is what i get:
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
xenix96 said:
Read this .. http://forum.xda-developers.com/showthread.php?t=2582135&page=2
---------- Post added at 02:12 AM ---------- Previous post was at 02:12 AM ----------
Read this..... http://forum.xda-developers.com/showthread.php?t=2582135&page=2
If you do really want to upgrade after you read the upper report i can help you cause Odin and Heimdall are no more supported and you cant downgrade anymore to 4.2.2
So think about it twice
And please read here too http://forum.xda-developers.com/showpost.php?p=45666586&postcount=1 ^^
Click to expand...
Click to collapse
Hey mate Read this :Edit: Dont root your device you might Void your warranty after updating < its a warning
mattish.91 said:
I got 5 buttons in odin and no one says "PDA" i know it's not "PIT" and the other ones are "BL, AP, CP, CSC" i guess it should be "AP" since that button is in the same place as "PDA" should be, and i still get failed when using Heimdall, i have also tried to download root, but since the download speed is so damn low from that site i cant get it... what am i doing wrong?
This is what i get:
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Bro Please remember if you update your phone to newest 4.3, there is no more chance for you to downgrade your system , and if you root/custom your phone / you will Void your Warranty , just like they said on i9506 thread to wait until someone make a custom rom in order NOT to void that warranty for your phone.
Repulsa said:
Hey mate Read this :Edit: Dont root your device you might Void your warranty after updating < its a warning
Bro Please remember if you update your phone to newest 4.3, there is no more chance for you to downgrade your system , and if you root/custom your phone / you will Void your Warranty , just like they said on i9506 thread to wait until someone make a custom rom in order NOT to void that warranty for your phone.
Click to expand...
Click to collapse
Yea. i got that, but now i can't use the phone so how do i reset it? kies doesnt work, and i can't find a proper 4.2.2 that i can flash with odin, root is not required atm...
mattish.91 said:
Yea. i got that, but now i can't use the phone so how do i reset it? kies doesnt work, and i can't find a proper 4.2.2 that i can flash with odin, root is not required atm...
Click to expand...
Click to collapse
Hello again , try here http://www.sammobile.com/firmwares/1/?model=GT-I9506&pcode=EVR#firmware Hope it helps and choose your country.
Repulsa said:
Hello again , try here http://www.sammobile.com/firmwares/1/?model=GT-I9506&pcode=EVR#firmware Hope it helps and choose your country.
Click to expand...
Click to collapse
Still can't download from those sources since they are too slow, can someone upload it somewhere else please? im allways getting interupted download...
mattish.91 said:
Still can't download from those sources since they are too slow, can someone upload it somewhere else please? im allways getting interupted download...
Click to expand...
Click to collapse
I cant try to download the file i have a 50/50 mbps and make a mirror for you but i need to know what file are you tring to download baseband, country , Carrier and such. have a nice day.
Repulsa said:
I cant try to download the file i have a 50/50 mbps and make a mirror for you but i need to know what file are you tring to download baseband, country , Carrier and such. have a nice day.
Click to expand...
Click to collapse
This is the file: http://samsung-updates.com/details/18144/Galaxy_S4_LTE-A/S800/GT-I9506/HTS/I9506XXUAMJ2.html the source is your's Thanks you'r awesome!
mattish.91 said:
I got 5 buttons in odin and no one says "PDA" i know it's not "PIT" and the other ones are "BL, AP, CP, CSC" i guess it should be "AP" since that button is in the same place as "PDA" should be, and i still get failed when using Heimdall, i have also tried to download root, but since the download speed is so damn low from that site i cant get it... what am i doing wrong?
This is what i get:
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Yes, AP is correct. Try a different data cable.
Enviado desde mi GT-P7510 usando Tapatalk 2
mattish.91 said:
This is the file: http://samsung-updates.com/details/18144/Galaxy_S4_LTE-A/S800/GT-I9506/HTS/I9506XXUAMJ2.html the source is your's Thanks you'r awesome!
Click to expand...
Click to collapse
Hello again here is the 4.2.2 firmware for your GT-I9506 , Make sure to Follow the instruction. and hoping to fix your problem, Have a nice day.
Gt-19506 4.2.2 Firmware https://mega.co.nz/#!XV4wRZ6b!LEDB9WuyI9SLUjqDsPrlBhTRSo9z1Sz6uWRCiq74qE8
Instructions For Flashing Firmware:
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From https://mega.co.nz/#!UdRRyCAT!H4FyVxYynNWvXqRNmnpMGQRCP-dG3uykgP2pT4rh8Ek)
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Power + Volume down buttons) in order to reach download mode.
- Connect phone and wait until you get a blue sign in Odin
- Add I9506XXUAMJ2_I9506HTSAMJ2_I9506XXUAMI1_HOME.tar.md 5 to AP
- Make sure re-partition is NOT ticked
- Click start button, and wait a few minutes.
-Your phone should automatically reboot after completion
-You can now disconnect your phone from computer .
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
Repulsa said:
Hello again here is the 4.2.2 firmware for your GT-I9506 , Make sure to Follow the instruction. and hoping to fix your problem, Have a nice day.
Gt-19506 4.2.2 Firmware https://mega.co.nz/#!XV4wRZ6b!LEDB9WuyI9SLUjqDsPrlBhTRSo9z1Sz6uWRCiq74qE8
Instructions For Flashing Firmware:
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From https://mega.co.nz/#!UdRRyCAT!H4FyVxYynNWvXqRNmnpMGQRCP-dG3uykgP2pT4rh8Ek)
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart phone in download mode (Press and hold Power + Volume down buttons) in order to reach download mode.
- Connect phone and wait until you get a blue sign in Odin
- Add I9506XXUAMJ2_I9506HTSAMJ2_I9506XXUAMI1_HOME.tar.md 5 to AP
- Make sure re-partition is NOT ticked
- Click start button, and wait a few minutes.
-Your phone should automatically reboot after completion
-You can now disconnect your phone from computer .
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
Click to expand...
Click to collapse
This is my result:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUAMJ2_I9506HTSAMJ2_I9506XXUAMI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
so this wasn't working, any idea? xD
mattish.91 said:
This is my result:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUAMJ2_I9506HTSAMJ2_I9506XXUAMI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
so this wasn't working, any idea? xD
Click to expand...
Click to collapse
You are trying to flash a stock 4.2.2 over a 4.3 knox bootloader!!!! If course you will get error!!!!
Since you have 4.3 knox bootlader, you only can flash stock 4.3 roms. Download the last update for your model from sammobile and reflash again with same process.
Enviado desde mi GT-I9500 usando Tapatalk 2
jaswinky said:
You are trying to flash a stock 4.2.2 over a 4.3 knox bootloader!!!! If course you will get error!!!!
Since you have 4.3 knox bootlader, you only can flash stock 4.3 roms. Download the last update for your model from sammobile and reflash again with same process.
Enviado desde mi GT-I9500 usando Tapatalk 2
Click to expand...
Click to collapse
im sorry, im totally lost and confused, what am i missing, there is only one 4.3 rom that is flashable throu odin and thats the french version and that should work in Sweden aswell, when i flash that rom i'm still getting that error, should i try to flash root before continuing? incase yes, which one? Im really grateful for all your help.
mattish.91 said:
im sorry, im totally lost and confused, what am i missing, there is only one 4.3 rom that is flashable throu odin and thats the french version and that should work in Sweden aswell, when i flash that rom i'm still getting that error, should i try to flash root before continuing? incase yes, which one? Im really grateful for all your help.
Click to expand...
Click to collapse
hello again , i did not know that you have a the newest bootloader for your phone and yet you requested a 4.2.2 anyways since your Knox void warranty is not 0x1 yet go ahead and send it back for repair , im sure they will fix this problem, since you did not void your warranty yet that's the best solution i can give you. or wait to someone here on xda know's how to fix this issue. have a nice day.
Repulsa said:
hello again , i did not know that you have a the newest bootloader for your phone and yet you requested a 4.2.2 anyways since your Knox void warranty is not 0x1 yet go ahead and send it back for repair , im sure they will fix this problem, since you did not void your warranty yet that's the best solution i can give you. or wait to someone here on xda know's how to fix this issue. have a nice day.
Click to expand...
Click to collapse
The problem is solvet simply flashed root, the only thing not working (so far) is keyboard xD and it is running 4.3
Hi, I had my S4 with stock rom 4.3 with adam kernel and philz touch recovery, tried to install via odin the stock rom 4.4.2 TTT but because of a CPU problem the usb connection was interrupted while installing. Now I'm stuck at download mode.
Here's details.
Download mode:
ODIN MODE
PRODUCT NAME: GT-I9500
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
RP SWREV: A3
After attempting install rom via odin:
appears the same in download mode plus this line:
SW REV. CHECK FAIL. DEVICE:-3, BINARY:2
Odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've already tried the same with the PIT file but still doesn't work, anybody got a clue?
Anybody? I need my phone back :S
chemell said:
Anybody? I need my phone back :S
Click to expand...
Click to collapse
Odin was interrupted at the bootloader update (sboot.bin). You need the "factory ROM" to flash it, however I am not aware if anything for 4.2.2 would be available for now.
spamtrash said:
Odin was interrupted at the bootloader update (sboot.bin). You need the "factory ROM" to flash it, however I am not aware if anything for 4.2.2 would be available for now.
Click to expand...
Click to collapse
But can I use another rom? I don't care if isn't a 4.2.2 rom because I need the phone again doesn't matter with which rom or android version.
If u can boot to recovery flash a custom rom then flash stock via odin
aayushkhajuria2842 said:
If u can boot to recovery flash a custom rom then flash stock via odin
Click to expand...
Click to collapse
I can't, I only got download mode...
Try the right key combination .....its nt possible that you can have download mode but nt recovery
Press and hold Volume Up, Home and Power
aayushkhajuria2842 said:
Try the right key combination .....its nt possible that you can have download mode but nt recovery
Press and hold Volume Up, Home and Power
Click to expand...
Click to collapse
Well it doesn't work, when I turn on the phone a black screen with a cellphone, a warning sign and a monitor appears and a text says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
With this screen I can only go into download mode but when I try recovery mode it just puts the screen black and back to the same text and pictures.
Another thing that worries me it's that I can't turn the phone off with the button, only if I pull the battery out.
This can be recovered I had same prblm some months ago bt I just flashed stock firmware nd it was fixed u may try flashing stock rom again
aayushkhajuria2842 said:
This can be recovered I had same prblm some months ago bt I just flashed stock firmware nd it was fixed u may try flashing stock rom again
Click to expand...
Click to collapse
I've already tried with the rom "I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5" (I believe it's stock rom) and get the odin error that appears in my first post...
Try some other firmware of you own region ......... 4.3 or 4.4 whichever u have for your region .......I think then u will nt get same error
chemell said:
Hi, I had my S4 with stock rom 4.3 with adam kernel and philz touch recovery, tried to install via odin the stock rom 4.4.2 TTT but because of a CPU problem the usb connection was interrupted while installing. Now I'm stuck at download mode.
Here's details.
Download mode:
ODIN MODE
PRODUCT NAME: GT-I9500
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX WARRANTY VOID: 1
RP SWREV: A3
After attempting install rom via odin:
appears the same in download mode plus this line:
SW REV. CHECK FAIL. DEVICE:-3, BINARY:2
Odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500UBUEMK1_I9500UUBEMK1_I9500UBUEMK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've already tried the same with the PIT file but still doesn't work, anybody got a clue?
Click to expand...
Click to collapse
Hi, try to flash through kies emergency firmware recovery.
navdeepavi said:
Hi, try to flash through kies emergency firmware recovery.
Click to expand...
Click to collapse
Hi, I tried, but in Kies I can't get trough the "Connecting..." status so when I choose "Emergency firmware recovery" the list of devices appears empty.
I think u should try flashing some other stock firmware I hav had the prblm before
aayushkhajuria2842 said:
I think u should try flashing some other stock firmware I hav had the prblm before
Click to expand...
Click to collapse
Hi, I'm downloading another firmware now. But I don't think it will work, i've tried with a pack I found (firmware+pit+booloader+cp+csc) and didn't work. Also I tried just flashing only de BP file and keep getting the same error:
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
I don't know what to do but I'm downloading an ARO stock firmware (4.3) and I'll try...
It should work I did the same thing but cant say anything
aayushkhajuria2842 said:
I think u should try flashing some other stock firmware I hav had the prblm before
Click to expand...
Click to collapse
Obviously not. simple flash of ROM is not sorting out the corrupted bootloader problem.
---------- Post added at 07:52 AM ---------- Previous post was at 07:45 AM ----------
chemell said:
Hi, I'm downloading another firmware now. But I don't think it will work, i've tried with a pack I found (firmware+pit+booloader+cp+csc) and didn't work. Also I tried just flashing only de BP file and keep getting the same error:
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
I don't know what to do but I'm downloading an ARO stock firmware (4.3) and I'll try...
Click to expand...
Click to collapse
considering your situation, I doubt if it will work. you have to pick from two scenarios:
a) your download mode shows warranty void, knox void, custom: then you have to go to step 2 below.
b) your download mode shows all statuses samsung or official or 0x0 - then go to 1
1. Call samsung service center, they shall sort it out under the warranty.
2. More complicated, if you do not want to pay for repairs.
DELETED, procedure was for I9505 ONLY
you have to follow the procedure form this link instead.
Good luck.
spamtrash said:
Obviously not. simple flash of ROM is not sorting out the corrupted bootloader problem.
---------- Post added at 07:52 AM ---------- Previous post was at 07:45 AM ----------
considering your situation, I doubt if it will work. you have to pick from two scenarios:
a) your download mode shows warranty void, knox void, custom: then you have to go to step 2 below.
b) your download mode shows all statuses samsung or official or 0x0 - then go to 1
1. Call samsung service center, they shall sort it out under the warranty.
2. More complicated, if you do not want to pay for repairs.
You will need the PC with not faulty CPU, first.
Then, you have to use the PIT from here
Of course, you will need the Qualcomm drivers as well, from here or this one
Then, you have to follow the relatively simple procedure described here
That shall fix the corrupted bootloader, and I hope that you will not see the described there errors which would point to the hardware problem.
Good luck.
Click to expand...
Click to collapse
Warning!
He said he is in trouble with a I9500 device, so the Qualcomm drivers will not help....much.
Just an observation, you said you have no recovery right? So have you tried just flashing the tar of PhilZ recovery using Odin to get it back?
At least then you'll have a recovery again and can move forward with a custom ROM install
Sent from my GT-I9505 using XDA Premium HD app
lolo9393 said:
Warning!
He said he is in trouble with a I9500 device, so the Qualcomm drivers will not help....much.
Click to expand...
Click to collapse
right. the correct one provided.
Hi
I have AT&T Note 3 , sim unlock from carrier, successful kingo root 0x0 Knox (startup splash screen says Custom Unlock)
So, I was hopped up on percocets because of my recent surgery and i decided i was in conscious enough mind to tackle getting AWS unlock. I wasn't.
I was reading about chainfire regionaway app, so i went to the app store and downloaded the first chainfire app that popped up - 3D. so now i am stuck in the note 3 splash screen. yes i know i should have read it more carefully, etc. but i just wasn't all there at the time. Please help me save this $500 brick!
I've been reading these methods:
http://www.droidviews.com/how-to-unbrick-att-galaxy-note-3-sm-n900a/
i can get the phone recognized in ODIN, but the secure check fail: cache occurs
http://forum.xda-developers.com/showthread.php?t=2567133
i can't download any of these files...
http://forum.xda-developers.com/showthread.php?t=2507403
tried this but didn't work.
i'm really not making any headway... any help would be much appreciated.
side note:
can i send this in for warranty? Since AT&T just release the kitkat update can i claim that i tried to update and it failed?
current binary: samsung official
system status: custom (not official)
Knox lock 0x0
Knox warranty void 0x0
EDIT: After doing the ODIN fail - it is stuck in ODIN mode and says "firmware upgrade encountered an issue. Please select recory mode in Kies & try again."
Can not enter download mode. But still connects in ODIN
thanks!
Yes you can return. Best bet as Knox counter is still 0.
If you try other methods and they don't work, you may tripe Knox.
Even you connect to your pc is the phone on download mode?
kenny1991 said:
Yes you can return. Best bet as Knox counter is still 0.
If you try other methods and they don't work, you may tripe Knox.
Even you connect to your pc is the phone on download mode?
Click to expand...
Click to collapse
when i connect to PC it recognizes in ODIN but KIES does not recognize it.
It won't go into reboot mode (vol up + power + home)
it only boots into ODIN mood
firstsx said:
when i connect to PC it recognizes in ODIN but KIES does not recognize it.
It won't go into reboot mode (vol up + power + home)
it only boots into ODIN mood
Click to expand...
Click to collapse
Lol?
What are you trying to do here? Flashing anything?
Is it 4.3 or 4.4 os?
Never run kies side by side Odin add the last one hates the first. Kies is useless.
Kill it and restart your pc. Don't run kies services when using Odin.
I think you should download your firmware from sammobile.com and flash it.
Take battery out and then try download mode again. After killing kies you should be able to use Odin to flash.
---------- Post added at 10:35 PM ---------- Previous post was at 10:32 PM ----------
I don't know. But flashing kitkat may tripe Knox i don't know atnt models. If you don't want to flash then return it.
kenny1991 said:
Lol?
What are you trying to do here? Flashing anything?
Is it 4.3 or 4.4 os?
Never run kies side by side Odin add the last one hates the first. Kies is useless.
Kill it and restart your pc. Don't run kies services when using Odin.
I think you should download your firmware from sammobile.com and flash it.
Take battery out and then try download mode again. After killing kies you should be able to use Odin to flash.
Click to expand...
Click to collapse
lol sorry!
ok if i run KIES (because the screen says connect to kies and do recovery mode) it does not recognize. I am not trying to connect ODIN and kies at the same time!
it was 4.3
i download the sammobile file - it says:
SQ Rev Check fail: [sbl1]Fused 2 > Binary 1
firstsx said:
lol sorry!
ok if i run KIES (because the screen says connect to kies and do recovery mode) it does not recognize. I am not trying to connect ODIN and kies at the same time!
it was 4.3
i download the sammobile file - it says:
SQ Rev Check fail: [sbl1]Fused 2 > Binary 1
Click to expand...
Click to collapse
Where does it say? Kies? Again kies is useless. I don't think it supports note 3.
This is your firmware. http://www.sammobile.com/firmwares/3/?download=25106
You know how to flash?
kenny1991 said:
Where does it say? Kies? Again kies is useless. I don't think it supports note 3.
This is your firmware.
You know how to flash?
Click to expand...
Click to collapse
yes i know its useless, the phone itself tells me to connect to kies. I just tried it once to see if it would rexognize but it does not!
Yes i downloaded the firmware from sammobile, put it into the AP portion of ODIN and start.
but when i run it, it fails and says this on my phone
SQ Rev Check fail: [sbl1]Fused 2 > Binary 1
firstsx said:
yes i know its useless, the phone itself tells me to connect to kies. I just tried it once to see if it would rexognize but it does not!
Yes i downloaded the firmware from sammobile, put it into the AP portion of ODIN and start.
Click to expand...
Click to collapse
hm. Still no recovery mode?
Past your Odin log so someone can see why it fails.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900AUCUBMI9_N900AATTBMI9_N900AUCUBMI9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Need pit file?
kenny1991 said:
Need pit file?
Click to expand...
Click to collapse
sammobile doesn't say anything about pit file?
i only used the AP file from there
i have HLTE__USA_ATT_32G_pit file even when i use that PIT file with the AP file it still gives me the same fail error...
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900AUCUBMI9_N900AATTBMI9_N900AUCUBMI9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
firstsx said:
i download the sammobile file - it says:
SQ Rev Check fail: [sbl1]Fused 2 > Binary 1
Click to expand...
Click to collapse
This means you are trying to flash a version older than what is currently installed. Try the next higher revision, or find one that doesn't include a bootloader.
Sent from my leanKernel 2.3 powered stock 4.4.2 SM-N900T
toastido said:
This means you are trying to flash a version older than what is currently installed. Try the next higher revision, or find one that doesn't include a bootloader.
Sent from my leanKernel 2.3 powered stock 4.4.2 SM-N900T
Click to expand...
Click to collapse
how can there be a newer version, it was never updated to kitkat?
sammobile only lists that version and i'm quite certain it was 4.3
so if i don't flash the bootloader, what do i flash?
can i not use these files?
AP_N900AUCUBMJ5.zip
BL_N900AUCUBMJ5.zip
CP_N900AUCUBMJ5.zip
HLTE_USA_ATT_32G.pit
firstsx said:
how can there be a newer version, it was never updated to kitkat?
sammobile only lists that version and i'm quite certain it was 4.3
so if i don't flash the bootloader, what do i flash?
can i not use these files?
AP_N900AUCUBMJ5.zip
BL_N900AUCUBMJ5.zip
CP_N900AUCUBMJ5.zip
HLTE_USA_ATT_32G.pit
Click to expand...
Click to collapse
Hi mate,
if you are stuck, maybe you can try this.
http://forum.xda-developers.com/showthread.php?t=2701062
it's a way to unbrick your software.
and update to kitkat.
maybe your problem is the firmware in the sammobile were before the firmware you have install on your device via OTA update.
Yours firmware came throw out via OTA update and with some reason you can't see any latest firmware USA N900A in sammobile.
try the method in the link and reply if you have been successful.
cumps
Markudsc said:
Hi mate,
if you are stuck, maybe you can try this.
http://forum.xda-developers.com/showthread.php?t=2701062
it's a way to unbrick your software.
and update to kitkat.
maybe your problem is the firmware in the sammobile were before the firmware you have install on your device via OTA update.
Yours firmware came throw out via OTA update and with some reason you can't see any latest firmware USA N900A in sammobile.
try the method in the link and reply if you have been successful.
cumps
Click to expand...
Click to collapse
can i use this method
http://forum.xda-developers.com/showthread.php?t=2559715
it seems pretty much the same, except yours includes updating to kitkat.
if i do kitkat, can i still keep root?
will this trip knox?
Ok i did this method
http://forum.xda-developers.com/showthread.php?t=2559715
i re-downloaded all the files because the files i had just wouldn't work in ODIN or anything. so based your advice i just downloaded new files.
ODIN flash was successful
then i did the rest of the steps successfully! and i am back!
i have samsung GT-I9505
Andriod Version 4.4.2 once i tried to update to 5.0.1 lolypop it show's me error on odon
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUHOB7_I9505BTUHOB4_I9505XXUHOB7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> sbl1.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Tried On 2 , 3 System's With Original Samsung Cabel's but no success Any One Can Help!
Thanks
Have u installed the drivers?
Also try from a different usb port.
osssinator said:
Have u installed the drivers?
Also try from a different usb port.
Click to expand...
Click to collapse
Yes Drive Installed if u have some other driver link plz share
Try different rom then.Make shure u load it from AP and repartition is unchecked. The OD7 is good one
If there is Samsung Kies installed make sure that it is not running. It conflicts with Odin.
GDReaper said:
If there is Samsung Kies installed make sure that it is not running. It conflicts with Odin.
Click to expand...
Click to collapse
kies install but not running
jamesdumas said:
kies install but not running
Click to expand...
Click to collapse
Are you sure? Check the task manager to make sure nothing from kies is running.
GDReaper said:
If there is Samsung Kies installed make sure that it is not running. It conflicts with Odin.
Click to expand...
Click to collapse
GDReaper said:
Are you sure? Check the task manager to make sure nothing from kies is running.
Click to expand...
Click to collapse
Yes 100% Sure its not running
on Mobile msg is
SECURE CHECK FAIL : sbl1
My Samsung Set don't show his Model number on startup screen just Samsung S4 is it any prob also ??
jamesdumas said:
My Samsung Set don't show his Model number on startup screen just Samsung S4 is it any prob also ??
Click to expand...
Click to collapse
Go into download mode and tell us what it says.
GDReaper said:
Go into download mode and tell us what it says.
Click to expand...
Click to collapse
PRODUCT MODE : SGH-I337
CURRENT BINARY :samsung official
SYSTEM STATUS : official
KNOX KEANEL LOCK : 0X0
KNOX WARRENTY VOID : 0x0
CSB-CONFIG-LSB : 0x30
WRITE PROTECTION : ENABLE
EMMC BURAST MODE : ENABLE
CHECK PLZ
jamesdumas said:
PRODUCT MODE : SGH-I337
CURRENT BINARY :samsung official
SYSTEM STATUS : official
KNOX KEANEL LOCK : 0X0
KNOX WARRENTY VOID : 0x0
CSB-CONFIG-LSB : 0x30
WRITE PROTECTION : ENABLE
EMMC BURAST MODE : ENABLE
CHECK PLZ
Click to expand...
Click to collapse
Have you tried downloading a different stock rom and trying with that?
GDReaper said:
Have you tried downloading a different stock rom and trying with that?
Click to expand...
Click to collapse
no can u plz provide me a link for downlaod plz
jamesdumas said:
no can u plz provide me a link for downlaod plz
Click to expand...
Click to collapse
Sammobile is the most reliable source. But the download is slow.
GDReaper said:
Have you tried downloading a different stock rom and trying with that?
Click to expand...
Click to collapse
GDReaper said:
Sammobile is the most reliable source. But the download is slow.
Click to expand...
Click to collapse
@sammobile no 5.0 lollipop for I-337
try read http://forum.xda-developers.com/galaxy-s4-att
:good:I installed a custom Rom On my Galaxy Note 3 (SM N900) after 3 days suddenly my device got hanged and I removed the battery then when I tried to turn it on by putting the battery on nothing happens but I can get into Download Menu. I tried with multiple odin versions, with multiple firmware's including pit file
My download menu status is :
Code:
ODIN MODE
Product Name : SM-N900
Current Binary: Custom
System Status: Custom
Reactivation Lock (KK): OFF
Secure Download : Enabled
KNOX WARRENTY VOID : 0
RP SWREV : A4
I tried to flash stock firmware downloaded from sammobile
My ODIN reading is
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900XXUEBOC4_N900ODDEBOB2_N900DDUEBOB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
[Solution] Added on 20th November 2015
The problem is with your device's hard drive which you may define as system storage . This is a very common issue with Samsung devices . Don't worry it's easy to fix . If you have warranty then go to Service center and if you don't have warranty then go to a service professional and ask him to replace your device's hard drive which contains ram and emcc in a single chip. If you face no base band issue then simply flash efs via odin that will resolve the imei issue
Costs : Around $50[max including service charge]
Why this occurs : You may face issue with removal drives that it asks for format automatically like this same occurs on your emcc but there's no way to fix it automatically and though three features in a single chip to its better to replace with new or better one.
U r not able to flash via Odin?
Sent from my SM-n900 using Tapatalk
NafeesKhabir said:
I installed a custom Rom On my Galaxy Note 3 (SM N900) after 3 days suddenly my device got hanged and I removed the battery then when I tried to turn it on by putting the battery on nothing happens but I can get into Download Menu.
My download menu status is :
Code:
ODIN MODE
Product Name : SM-N900
Current Binary: Custom
System Status: Custom
Reactivation Lock (KK): OFF
Secure Download : Enabled
KNOX WARRENTY VOID : 0
RP SWREV : A4
I tried to flash stock firmware downloaded from sammobile
My ODIN reading is
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900XXUEBOC4_N900ODDEBOB2_N900DDUEBOB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
How can I get rid from this situation ?
Click to expand...
Click to collapse
Try to change the version of odin into 3.7 before that try to clear cash from recovery if you can
أرسلت من SM-N900 بإستخدام تاباتلك
Are you get error "Odin downloader has stopped working" window when add md5 file?
Gửi từ SM-N900 của tôi bằng cách sử dụng Tapatalk
Which custom ROM did you install?
Sent from my SM-G925P using Tapatalk
NafeesKhabir said:
I installed a custom Rom On my Galaxy Note 3 (SM N900) after 3 days suddenly my device got hanged and I removed the battery then when I tried to turn it on by putting the battery on nothing happens but I can get into Download Menu.
My download menu status is :
Code:
ODIN MODE
Product Name : SM-N900
Current Binary: Custom
System Status: Custom
Reactivation Lock (KK): OFF
Secure Download : Enabled
KNOX WARRENTY VOID : 0
RP SWREV : A4
I tried to flash stock firmware downloaded from sammobile
My ODIN reading is
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900XXUEBOC4_N900ODDEBOB2_N900DDUEBOB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
How can I get rid from this situation ?
Click to expand...
Click to collapse
Just go to Samsung store or a friend who's matter in this techno and ask him what's the problem because there are so many users who are facing same prob but noone has got the solution individually.
BTW which ROM u installed??
Sent from my SM-N900 using Tapatalk
leosrw said:
Just go to Samsung store or a friend who's matter in this techno and ask him what's the problem because there are so many users who are facing same prob but noone has got the solution individually.
BTW which ROM u installed??
Sent from my SM-N900 using Tapatalk
Click to expand...
Click to collapse
[Lollipop]Aurora-N900-Full-G9200-Port-No.3.0 ;
p_san_p said:
U r not able to flash via Odin?
Sent from my SM-n900 using Tapatalk
Click to expand...
Click to collapse
No see the odin status I've mentioned
IRoN MaN9 said:
Try to change the version of odin into 3.7 before that try to clear cash from recovery if you can
أرسلت من SM-N900 بإستخدام تاباتلك
Click to expand...
Click to collapse
Okay I will try with 3.76 (I tried with 3.9 and 3.10 )
ninja_unmatched said:
Which custom ROM did you install?
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
[Lollipop]Aurora-N900-Full-G9200-Port-No.3.0
In recovery format system data cache .
Boot to download and flash correct newly downloaded stock rom .
Tried with different roms, different odin's and PC's but same issue
Backup any data you need first before you do all that. The Aurora ROMs are best place on after a full wipe as JJEgan says. Also once you do it, do them 3 times. Flash system data cache 3 time for good measure. (It does happen at times where 1 is not enough and you find stuff stayed. Also consider using the newer versions like 3.3 instead of that one.
Sent from my SM-G925P using Tapatalk
Did you tried to run odin as administrator?
Regards,
Claudio
NafeesKhabir said:
[Lollipop]Aurora-N900-Full-G9200-Port-No.3.0
Click to expand...
Click to collapse
If your phone is going into recovery mode then try flashing aurora port 5 rom.
Sent from my SM-N900 using Tapatalk
leosrw said:
If your phone is going into recovery mode then try flashing aurora port 5 rom.
Sent from my SM-N900 using Tapatalk
Click to expand...
Click to collapse
I's not going to recovery mode , It opens in download mode only and but not taking firmware's via odin, Stuck at Initialisation
NafeesKhabir said:
I's not going to recovery mode , It opens in download mode only and but not taking firmware's via odin, Stuck at Initialisation
Click to expand...
Click to collapse
Last try upgrading firmware with Samsung kies
Sent from my SM-N900 using Tapatalk
leosrw said:
Last try upgrading firmware with Samsung kies
Sent from my SM-N900 using Tapatalk
Click to expand...
Click to collapse
It's not recognizing
Try to flash stock firmwave by FlashFire directly on phone.
Guide & video here:
http://samsungviet.vn/threads/up-st...uc-tiep-tren-dien-thoai-video-guide-add.7434/
NafeesKhabir said:
Tried with different roms, different odin's and PC's but same issue
Click to expand...
Click to collapse
Have you use stock original cable? Try with another cable