Related
hey friends , my hd2 was working very well untill touch screen stopped responding to any touch .. i haven't dropped nor damaged it anyway , it just happened suddenly ..
i found someone said it may be digitizer ribbon related proplem so i did what he advised :
[ Press the top of the red button (when pushing on the top your pushing the ribbon).
Press the bottom of the red button thus releasing the stress on the ribbon.
Press the green button. ]
i got it working for sometime then after i press on the red key it stop working again ..
please can anyone help me to fix this proplem .. ?
I got the same problem
Hi guys,
I have the same problem with my LEO 512, each time I try to reboot the device (Long pressing the power button) the touch screen hangs, but the buttons working properly, and whenever I activate the device by pressing the power button, or rejecting a call with it also the screen hangs.
I think there is a short circuit between the power button and the screen.
Anyone has any idea what to do to fix this issue???
Thanks
good day, unfortunately is a defect hd2 the only thing to do is send it in for service or replace the touch, have just made my warranty is also changing the screen and putting touch screen no longer equal to the original but different. the screen much more crisp and bright and the touch with a stunning response
mmaaggss said:
good day, unfortunately is a defect hd2 the only thing to do is send it in for service or replace the touch, have just made my warranty is also changing the screen and putting touch screen no longer equal to the original but different. the screen much more crisp and bright and the touch with a stunning response
Click to expand...
Click to collapse
I agree with you, I already sent it to HTC service yesterday, and first thing came to his mind that they would replace the "screen" or the touch or "both" , but he will check the power button problem first.
By the way, I got link (unfortunately I will not be able to submit it as I'm still new to the forum) this would help you. It is in the "Touch screen won't work" under the "General HTC HD2 discussion" in "HTCHD2forum(.com)"...
Thanks
John.Massiass said:
I agree with you, I already sent it to HTC service yesterday, and first thing came to his mind that they would replace the "screen" or the touch or "both" , but he will check the power button problem first.
By the way, I got link (unfortunately I will not be able to submit it as I'm still new to the forum) this would help you. It is in the "Touch screen won't work" under the "General HTC HD2 discussion" in "HTCHD2forum(.com)"...
Thanks
Click to expand...
Click to collapse
hey john , to which HTC branch you sent ?!
did he tell you that he can replace the digitizer only ?!!
& what about the cost ?!
also what is the important info. i can find in this forum ?
This is a common problem with the 512 HD2's. I have found that although some temporary fixes do help, such as using only the green button to wake the screen, and holding certain parts of the screen while pressing others do work in a pinch, but only a digitizer replacement will fix it permanently. The replacement digitizers are much better, and do not have the bug. Replacing the LCD with the newer one results in a much nicer picture.
Both of these parts can be found on eBay, and there are teardown videos on youtube to tell you how to replace them, saving you a fairly large amount of money if you are no longer under warranty.
needo said:
hey john , to which HTC branch you sent ?!
did he tell you that he can replace the digitizer only ?!!
& what about the cost ?!
also what is the important info. i can find in this forum ?
Click to expand...
Click to collapse
Hi Needo,
I went to El Mohandeseen branch (Jovi Tronix), they have already replied me that they will have to replace the whole LCD screen with the digitizer, costing about 1,400 EGP (232$) which was a total loss for me .
Of course I refused, but thanks to "Cappii" who posted after you, I found the LCD screen with the digitzer in "ebay" which would cost about 475 EGP (78.5$) using "Edfa3ly.com service"!!!
A big thanks to you "Cappii"
I'm thinking of going to "Abd El Azeez street" first and check how much would it cost (if applicable), it would be faster than waiting for 2 to 4 weeks till I get the LCD screen from the US.
Wish you best of luck.
John.Massiass said:
Of course I refused, but thanks to "Cappii" who posted after you, I found the LCD screen with the digitzer in "ebay" which would cost about 475 EGP (78.5$) using "Edfa3ly.com service"!!!
A big thanks to you "Cappii"
Wish you best of luck.
Click to expand...
Click to collapse
Anytime. If you do the repair yourself, make sure that you pay .attention to the connectors on the bottom of the main board. There are a few that are a little tricky. Overall, it's not an easy phone to repair, but it's a lot easier than iPhone 4's or HTC Arias.
cappii said:
Anytime. If you do the repair yourself, make sure that you pay .attention to the connectors on the bottom of the main board. There are a few that are a little tricky. Overall, it's not an easy phone to repair, but it's a lot easier than iPhone 4's or HTC Arias.
Click to expand...
Click to collapse
Yes, I've watched how to disassemble and replace the touch screen videos on you tube before, I noticed that it is very complicated and tricky, but I like this kind of stuff, any way.
cappii said:
This is a common problem with the 512 HD2's. I have found that although some temporary fixes do help, such as using only the green button to wake the screen, and holding certain parts of the screen while pressing others do work in a pinch, but only a digitizer replacement will fix it permanently. The replacement digitizers are much better, and do not have the bug. Replacing the LCD with the newer one results in a much nicer picture.
Both of these parts can be found on eBay, and there are teardown videos on youtube to tell you how to replace them, saving you a fairly large amount of money if you are no longer under warranty.
Click to expand...
Click to collapse
Thanks cappii for your help , i think i'll do that ..
John.Massiass said:
Hi Needo,
I went to El Mohandeseen branch (Jovi Tronix), they have already replied me that they will have to replace the whole LCD screen with the digitizer, costing about 1,400 EGP (232$) which was a total loss for me .
Of course I refused, but thanks to "Cappii" who posted after you, I found the LCD screen with the digitzer in "ebay" which would cost about 475 EGP (78.5$) using "Edfa3ly.com service"!!!
I'm thinking of going to "Abd El Azeez street" first and check how much would it cost (if applicable), it would be faster than waiting for 2 to 4 weeks till I get the LCD screen from the US.
Wish you best of luck.
Click to expand...
Click to collapse
Thanks too much john , it's really great idea to use (edfa3ly.com) ..
also i've found someone can fix it for about 500 L.E (may be 400), they say he is expert with HTC & iPhone devices ..
if i repaired it myself , it will cost me about 300 L.E only , but with some risk as i heard that separating digitizer from touch screen can break it !
also i'll have to wait for about 2 or 3 weeks ..
i'm not sure about what i should do ..
what do you think ?!
& what will you do & why will you change LCD (i think the proplem is just related to digitizer ) & did you found it in " abd el aziz " ?!
& Thanks in advance sir
needo said:
Thanks cappii for your help , i think i'll do that ..
Thanks too much john , it's really great idea to use (edfa3ly.com) ..
also i've found someone can fix it for about 500 L.E (may be 400), they say he is expert with HTC & iPhone devices ..
if i repaired it myself , it will cost me about 300 L.E only , but with some risk as i heard that separating digitizer from touch screen can break it !
also i'll have to wait for about 2 or 3 weeks ..
i'm not sure about what i should do ..
what do you think ?!
& what will you do & why will you change LCD (i think the proplem is just related to digitizer ) & did you found it in " abd el aziz " ?!
& Thanks in advance sir
Click to expand...
Click to collapse
Hey Needo, What's up?
I didn't go yet to "Abdel Azeez street" but I'm willing to.
I prefer to have someone fix it for me; as it will be with less risk. But there is an advantage regarding getting the stuff from the US that you know they are brand new, not used.
I'm not expert in the hardware stuff, but this is the feedback I got from HTC that the whole LCD should be changed; this is why I need someone else to check it.
Could you please tell me more about this one you found, who can handle the HTC and I Phone???
Thanks my friend and wish you fix your phone soon (so do I )
Best regards,
John
+20 100 1777 053
John.Massiass said:
Hey Needo, What's up?
I didn't go yet to "Abdel Azeez street" but I'm willing to.
I prefer to have someone fix it for me; as it will be with less risk. But there is an advantage regarding getting the stuff from the US that you know they are brand new, not used.
I'm not expert in the hardware stuff, but this is the feedback I got from HTC that the whole LCD should be changed; this is why I need someone else to check it.
Could you please tell me more about this one you found, who can handle the HTC and I Phone???
Thanks my friend and wish you fix your phone soon (so do I )
Best regards,
John
+20 100 1777 053
Click to expand...
Click to collapse
Hi needo, please tell me more about this guy you found who is fixing htc devices.
Thanks
cappii said:
Anytime. If you do the repair yourself, make sure that you pay .attention to the connectors on the bottom of the main board. There are a few that are a little tricky. Overall, it's not an easy phone to repair, but it's a lot easier than iPhone 4's or HTC Arias.
Click to expand...
Click to collapse
I replaced the screen on my i4 2 times. I think fixing a HD2 is a much bigger PITA
John.Massiass said:
Hey Needo, What's up?
I didn't go yet to "Abdel Azeez street" but I'm willing to.
I prefer to have someone fix it for me; as it will be with less risk. But there is an advantage regarding getting the stuff from the US that you know they are brand new, not used.
I'm not expert in the hardware stuff, but this is the feedback I got from HTC that the whole LCD should be changed; this is why I need someone else to check it.
Could you please tell me more about this one you found, who can handle the HTC and I Phone???
Thanks my friend and wish you fix your phone soon (so do I )
Best regards,
John
+20 100 1777 053
Click to expand...
Click to collapse
sorry for being late in reply john ,
i sent it to this guy in " el srag mall " in shop called " Win Mac " he told me that he will change touch ( digitizer ) for 500 L.E in 2 days & he did it .. after i recieved it , it was working fairly good , but not like before .. then i tried to install WP7 , when it booted to welcome screen , found that i've no touch at all ..
returned back to WM 6.5 touch screen working , but not very properly .. tried to install NAND Android it gave me strange line of no.s & stuck at GO GO GO when i try to enter CWM ...
tried to boot into SD android Build , i got the same problem ..
so i decided to install WP7 again & sent it to him & told him about the problem , he told me to leave it & he'll fix it .. after 4 days i went to him & he told me that he tried to change digitizer for 2 times , but it's not working properly (in the best case , only the lower half of the screen got working) so he'll change LCD also ( the strange thing that he told me that i won't bey for that !!! & he will take my LCD instead ) ..
really i don't know if i should believe in what he say or not , but anyway i've nothing to do .. i'll wait to see what will he do !
what do you think ?!
Just wanted to chime in. I have heard various reports of having to change both the LCD and touch, although on my personal experience, the touch seems to fix it. Now, separating the LCD from the touch is a fairly simple process. Once the boards are removed, turn the unit over so that the touch and lcd are up. Heat the touch with a good hair dryer for about 3 minutes, and slowly lift with a plastic separator while its still very hot. Lift from the top, not the bottom.
There is a lot of tape on the bottomod the LCD. Heat LCD with the hair dryer, and slowly lift, keeping the frame flat on a table. If the frame warps, it will be next to impossible to reseat the touch and LCD. Make sure it stays flat.
Take your time and pay attention to all the wires. Take pics to reference where everything is. There is little to no tolerence for error on the rebuild.
I got it fixed
cappii said:
Just wanted to chime in. I have heard various reports of having to change both the LCD and touch, although on my personal experience, the touch seems to fix it. Now, separating the LCD from the touch is a fairly simple process. Once the boards are removed, turn the unit over so that the touch and lcd are up. Heat the touch with a good hair dryer for about 3 minutes, and slowly lift with a plastic separator while its still very hot. Lift from the top, not the bottom.
There is a lot of tape on the bottomod the LCD. Heat LCD with the hair dryer, and slowly lift, keeping the frame flat on a table. If the frame warps, it will be next to impossible to reseat the touch and LCD. Make sure it stays flat.
Take your time and pay attention to all the wires. Take pics to reference where everything is. There is little to no tolerence for error on the rebuild.
Click to expand...
Click to collapse
Thanks Cappii, I already have seen that and I assure you, it's a very complicated and delicate process which needs much accuracy.
needo said:
sorry for being late in reply john ,
i sent it to this guy in " el srag mall " in shop called " Win Mac " he told me that he will change touch ( digitizer ) for 500 L.E in 2 days & he did it .. after i recieved it , it was working fairly good , but not like before .. then i tried to install WP7 , when it booted to welcome screen , found that i've no touch at all ..
returned back to WM 6.5 touch screen working , but not very properly .. tried to install NAND Android it gave me strange line of no.s & stuck at GO GO GO when i try to enter CWM ...
tried to boot into SD android Build , i got the same problem ..
so i decided to install WP7 again & sent it to him & told him about the problem , he told me to leave it & he'll fix it .. after 4 days i went to him & he told me that he tried to change digitizer for 2 times , but it's not working properly (in the best case , only the lower half of the screen got working) so he'll change LCD also ( the strange thing that he told me that i won't bey for that !!! & he will take my LCD instead ) ..
really i don't know if i should believe in what he say or not , but anyway i've nothing to do .. i'll wait to see what will he do !
what do you think ?!
Click to expand...
Click to collapse
Hey Needo, I'm sorry for hearing that about your phone, I wish that it would be recovered soon, and this guy would be as honest as he said. I feel that he sensed that it's his fault to break the LCD. Anyways I wish that it would be fixed by now.
About me, I went to "Abdel Azeez street", hoping to find someone who might know something about this device, and you know what, I found that many people there already working with experience in Iphone and HD2. And I found that they fix it while you are with them to make sure that they don't cheat you, or fix it with used spare parts. For me, I found that guy who changed the touch in front of me with a new sealed one, it was a process of about 3 interesting hours, which cost me 550 EGP (91$). Of course it wasn't in the best quality as there are some dust between the LCD and the touch screen, and there is some light coming out from the bottom of the phone between the frame and the touch, but I consider them as minor losses . It's working perfectly now at last.
If you ever wanted his contact, I would be glad to forward it to you anytime.
cheers.
Hi guys,
I have a galaxy S4 I9500 version and I have observed a problem with it. I was sharing media with my friend's Xperia Z via NFC, while doing that, my phones' screen started flickering highlighting clock at the top portion.
Later I turned off both mobiles' NFC and taken both mobiles close and guess what my phones' screen flickered again.
I checked it with my old Galaxy S I9000 which doesn't even has NFC, again S4s' screen flickered.
Then I went to service center to show this issue, as they were not having any other S4 there to crosscheck problem, they asked me to visit a Samsung mobile shop. There I checked it with three S4s' which were on display and I found that problem was there with each and every S4.
So guys can you check your phones' for this issue and will it cause any problem to phone as the time passes??
similar type of problem
tush1114 said:
Hi guys,
I have a galaxy S4 I9500 version and I have observed a problem with it. I was sharing media with my friend's Xperia Z via NFC, while doing that, my phones' screen started flickering highlighting clock at the top portion.
Later I turned off both mobiles' NFC and taken both mobiles close and guess what my phones' screen flickered again.
I checked it with my old Galaxy S I9000 which doesn't even has NFC, again S4s' screen flickered.
Then I went to service center to show this issue, as they were not having any other S4 there to crosscheck problem, they asked me to visit a Samsung mobile shop. There I checked it with three S4s' which were on display and I found that problem was there with each and every S4.
So guys can you check your phones' for this issue and will it cause any problem to phone as the time passes??
Click to expand...
Click to collapse
hii,
i am facing similar type of problem. the diffrence is that i get such flickering whenever i am using the mobile data network after evry few minutes and the flicker is like a flash(means it lasts for a fraction of second). i started to have this issue from past few days and this is extremely annoying.
Dont know wat to do!!
ayushsocool said:
hii,
i am facing similar type of problem. the diffrence is that i get such flickering whenever i am using the mobile data network after evry few minutes and the flicker is like a flash(means it lasts for a fraction of second). i started to have this issue from past few days and this is extremely annoying.
Dont know wat to do!!
Click to expand...
Click to collapse
just submit it to the service center and ask them to remove that problem and dont accept it back until they fix it.
tush1114 said:
just submit it to the service center and ask them to remove that problem and dont accept it back until they fix it.
Click to expand...
Click to collapse
today i went to the service centre. they couldnt understand the problem with it and have submitted my mobile. they have asked me to wait for their reply as their higher technician will study the problem with the device!!
ayushsocool said:
today i went to the service centre. they couldnt understand the problem with it and have submitted my mobile. they have asked me to wait for their reply as their higher technician will study the problem with the device!!
Click to expand...
Click to collapse
Good, let them take their time, dont accept that phone back unless they fix that problem....
Isn't flickering in all S4?
vegetaleb said:
Isn't flickering in all S4?
Click to expand...
Click to collapse
have you tried it with any other smartphone, like we do it while using nfc??
tush1114 said:
Good, let them take their time, dont accept that phone back unless they fix that problem....
Click to expand...
Click to collapse
itss been two days and they have not yet been able to figure out the problem!!
however how did you get your problem sorted out???
Check this
The S-view will be triggered by any magnet
gtht2001 said:
Check this
The S-view will be triggered by any magnet
Click to expand...
Click to collapse
But I think it could turn into an issue because earlier my phones' screen was flickering and waking up automatically highlighting clock just like shown in that video.
I submitted my phone to them and they have replaced display with new one. Now it is not flickering automatically but it does while holding devices side by side as that sensor gets triggered by any magnet. So there is a possibility that the sensor could get permanently affected by a strong magnetic field and triggers the screen to wake up automatically.
ayushsocool said:
itss been two days and they have not yet been able to figure out the problem!!
however how did you get your problem sorted out???
Click to expand...
Click to collapse
They replaced display with new one and now the problem is sorted out.
Yesterday I tried something with my s4..
I disabled samsung link, clock digital(both of em), watch on, and dropbox.
The problem of flickering and clock appearing on top was GONE!! until......
I turned on the data network and found it coming back again...
I figured that it happened to me since i updated it to UBMG1 Indian firmware from BMEA
So i am now rolling back to the latter and sammobile here i come
Even i have also tried a lot of things... but problem was still there.... i think it messes with hardware and there is only one solution and tht is to replace the display with new one... if you find sonething to sortout this issue without replacing any hardware part...pls post it here....
Sent from my GT-I9500 using xda app-developers app
Same problem here.
Does any one got this solved.. as said by one member, even in chennai - tamilnadu, they are not clear on what the issue i am explaining to them, they just changed the motherboard. but no use still.
"S-view mode activates itself, dono why... it happened for me in a month old S4, i got my motherboard replaced, but still the issue is persisting. but the frequency became less. thats it. other than that no use.
as mentioned by one of the member, it is annoying as it happens any time u work with your phone. in any screen suddenly "
ksenthi5 said:
Does any one got this solved.. as said by one member, even in chennai - tamilnadu, they are not clear on what the issue i am explaining to them, they just changed the motherboard. but no use still.
"S-view mode activates itself, dono why... it happened for me in a month old S4, i got my motherboard replaced, but still the issue is persisting. but the frequency became less. thats it. other than that no use.
as mentioned by one of the member, it is annoying as it happens any time u work with your phone. in any screen suddenly "
Click to expand...
Click to collapse
I got my screen replaced but in vain.. I think using the S view cover will help because the flickering is caused by s view initiation (black screen with clock) which is initiated by a magnetic sensor..
Buy unfortunately the s- view cover is costly and so I cannot buy it at the moment .
A possible solution is to turn the s-view service off to stop the flickering issue..
If any developer on the site could help us out..
tush1114 said:
Even i have also tried a lot of things... but problem was still there.... i think it messes with hardware and there is only one solution and tht is to replace the display with new one... if you find sonething to sortout this issue without replacing any hardware part...pls post it here....
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
Many people who had the complaint got their display changed but to no avail so it is definitely a software problem..
Sent from my GT-I9070 using xda app-developers app
zubairamd said:
Buy unfortunately the s- view cover is costly and so I cannot buy it at the moment .
A possible solution is to turn the s-view service off to stop the flickering issue..
If any developer on the site could help us out..
Many people who had the complaint got their display changed but to no avail so it is definitely a software problem..
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
- Actually am using the S-View Cover. But with no use, when its out of S-View cover it behaves erratic by switching to S-View display automatically.
-Yes you are right it can be a software problem ,but take my words, i used a S4 which i bought on launch date in India, i used it for 3 months, then i gave it to my cousin, and bought another new one - this is the one which is showing up this S-View Issue,
the old one which i had was a GEM, not even once i had this problem of S-View with it, both where of same SW revision level, hence there is something to do with the hardware.
am just waiting for the October 4.3 update, if this is not solved in that SW by any means, then am gonna **** on every Samsung technician in the service center, they don't even know the difference between Hall sensor and proximity sensor!!!! , for making them understand the problem in our phone itself is painstaking..
in between is there any change to bring this issue to Samsung's eye.!?
ksenthi5 said:
- Actually am using the S-View Cover. But with no use, when its out of S-View cover it behaves erratic by switching to S-View display automatically.
-Yes you are right it can be a software problem ,but take my words, i used a S4 which i bought on launch date in India, i used it for 3 months, then i gave it to my cousin, and bought another new one - this is the one which is showing up this S-View Issue,
the old one which i had was a GEM, not even once i had this problem of S-View with it, both where of same SW revision level, hence there is something to do with the hardware.
am just waiting for the October 4.3 update, if this is not solved in that SW by any means, then am gonna **** on every Samsung technician in the service center, they don't even know the difference between Hall sensor and proximity sensor!!!! , for making them understand the problem in our phone itself is painstaking..
in between is there any change to bring this issue to Samsung's eye.!?
Click to expand...
Click to collapse
True the service center's technicians
Don't know anything...
If you report that the s-view cover also gives the same result instead showing the s- view when it is supposed then I won't buy it because I only wanted to buy it currently just to fix the issue..
Also just waiting for the android 4.3 update..
Sent from my GT-I9070 using xda app-developers app
That's not a issue. It's s-view feature in phone. If your phone get close to any magnet/magnetic source then it will activate s-view screen.
A lot of devices like iPad and Nexus 7 have a small magnet in them to provide support for cover/accessories. If your S4 get close enough to that magnet on other device it will activate s-view screen.
I dont know exactly if your other phone that you are trying NFC with, has a magnet. but there should be.
rl421403 said:
That's not a issue. It's s-view feature in phone. If your phone get close to any magnet/magnetic source then it will activate s-view screen.
A lot of devices like iPad and Nexus 7 have a small magnet in them to provide support for cover/accessories. If your S4 get close enough to that magnet on other device it will activate s-view screen.
I dont know exactly if your other phone that you are trying NFC with, has a magnet. but there should be.
Click to expand...
Click to collapse
I know that it is a feature but it comes just in between typing process or running through the temple (temple run) and it disturbs a lot so I thought of using the s- view cover so it will restrict the feature to only when needed out initiated by closing the cover instead of coming every time in between activity..
Sent from my GT-I9070 using xda app-developers app
rl421403 said:
That's not a issue. It's s-view feature in phone. If your phone get close to any magnet/magnetic source then it will activate s-view screen.
A lot of devices like iPad and Nexus 7 have a small magnet in them to provide support for cover/accessories. If your S4 get close enough to that magnet on other device it will activate s-view screen.
I dont know exactly if your other phone that you are trying NFC with, has a magnet. but there should be.
Click to expand...
Click to collapse
Not always, see i am just holding my phone in hand, or it is laid on a wooden desk, even then this flickering into S-View mode happens.
zubairamd said:
I know that it is a feature but it comes just in between typing process or running through the temple (temple run) and it disturbs a lot so I thought of using the s- view cover so it will restrict the feature to only when needed out initiated by closing the cover instead of coming every time in between activity..
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
exactly, this is the same annoying behavior i am also facing and is really disturbing and irritating.
i have again given the phone to the service center, lets see what happens next.
Hi everyone. Today, I noticed that something is covering my front camera lens.
Do you know what is that piece covering the camera? Anyone encounter this situation?
I didn't drop my phone not even once and I tried to smack the top of the phone to see if it moves, but no luck.
P.S. The camera is able to take pictures normally.
I have a SM-N9005.
Thanks
Go exchange it... Looks like a faulty device. It could be a piece of electrical tape in the wrong position.
Sent from my SM-N900W8 using Tapatalk
bogdan2603 said:
Hi everyone. Today, I noticed that something is covering my front camera lens.
Do you know what is that piece covering the camera? Anyone encounter this situation?
I didn't drop my phone not even once and I tried to smack the top of the phone to see if it moves, but no luck.
P.S. The camera is able to take pictures normally.
I have a SM-N9005.
Thanks
Click to expand...
Click to collapse
I have the exact same problem. Although mine is worse and i cant take pictures normally. Did you managed to solve this
bogdan2603 said:
Hi everyone. Today, I noticed that something is covering my front camera lens.
Do you know what is that piece covering the camera? Anyone encounter this situation?
I didn't drop my phone not even once and I tried to smack the top of the phone to see if it moves, but no luck.
P.S. The camera is able to take pictures normally.
I have a SM-N9005.
Thanks
Click to expand...
Click to collapse
*boy*racer* said:
I have the exact same problem. Although mine is worse and i cant take pictures normally. Did you managed to solve this
Click to expand...
Click to collapse
Looks like some sort of cover for the camera.
Maybe this site can help understand: http://www.ifixit.com/Teardown/Samsung+Galaxy+Note+3+Teardown/19209
But i think @nicholaschum 's solution will work best.
HanZie82 said:
Looks like some sort of cover for the camera.
Maybe this site can help understand: http://www.ifixit.com/Teardown/Samsung+Galaxy+Note+3+Teardown/19209
But i think @nicholaschum 's solution will work best.
Click to expand...
Click to collapse
Hey you were right. Soon as i posted my issue, i thought i would watch a dismantle video and presto! It was a round rubber like washer that has slipped from around the camera.
All sorted now
Hi....Can you let me know how did you get this fixed as I am also having the same issue....
nelven said:
Hi....Can you let me know how did you get this fixed as I am also having the same issue....
Click to expand...
Click to collapse
Hi,
I didn't
Now, that rubber is covering a lot more and I'm unable to take pictures.
nicholaschum said:
Go exchange it... Looks like a faulty device. It could be a piece of electrical tape in the wrong position.
Sent from my SM-N900W8 using Tapatalk
Click to expand...
Click to collapse
i think its a faulty device or a piece of electrical tape too
3azmeo said:
i think its a faulty device or a piece of electrical tape too
Click to expand...
Click to collapse
I don't think they will consider to be a faulty device and change it, although I would like a new Note 3 :fingers-crossed::fingers-crossed::fingers-crossed:
To me, it seems to be a soft plastic that keeps the front-camera in position and not to touch directly the front-panel (display assembly).
So, probably they will change/remove the soft plastic
GO to your provider an request a NEW device
Do this : Contact 1st Samsung Service in your country and tell to them the problem becouse this a factory fault phone .
After you make some papers and a proove that you contacted already the samsung Service from your country , contact your seller and show him the problem
YOU MUST proove that : you did NOT DROPED your PHONE , DID NOT SHOCKED YOUR PHONE with some other things , like drop with speed in bed trow in the pillow etc etc , proove that you did not used any screwdriver , to have ORANGE WATER SENSOR in the back under the battery STILL ORANGE and NO ROOTED PHONE .
THEY WILL CHANGE YOUR DEVICE , BECOUSE IS IMPOSSIBLE TO FIX THAT IS A PART OF A PLASTIC THAT WAS SLIPPERED FROM HIS PLACE .
hello,
today i gave my i9506 in repair for changing display unit. the man in the shop i gave it to said that there is no difference between i9506 and i9505 when repairing the display and they will build the i9505 into it. but i read somewhere that there is a small difference. do you know about that? because i am confused now and scared that they will break my device
breakingstorm said:
hello,
today i gave my i9506 in repair for changing display unit. the man in the shop i gave it to said that there is no difference between i9506 and i9505 when repairing the display and they will build the i9505 into it. but i read somewhere that there is a small difference. do you know about that? because i am confused now and scared that they will break my device
Click to expand...
Click to collapse
Hey
If I were you, I would contact Samsung support by mail or phone and ask them if this statement is true. I could believe it's possible, but again you never know when it comes to Samsung. They could have changed a little bit...
Regards.
DeHAWK said:
Hey
If I were you, I would contact Samsung support by mail or phone and ask them if this statement is true. I could believe it's possible, but again you never know when it comes to Samsung. They could have changed a little bit...
Regards.
Click to expand...
Click to collapse
Done. The Support couldnt give me an answer on my question.. I will see what happens.
U can compare the devices on different internet sites and u will see that there is NO difference between those displays
well, there might be no difference, but actually, yes there was ! o:
i got it back yesterday, and it worked for 1.5 hours with restarting whole time and than it was dead and didnt boot normal or into recovery or download mode.
Now they have to reapair it better.. with i9506 display that will work 100%
breakingstorm said:
well, there might be no difference, but actually, yes there was ! o:
i got it back yesterday, and it worked for 1.5 hours with restarting whole time and than it was dead and didnt boot normal or into recovery or download mode.
Now they have to reapair it better.. with i9506 display that will work 100%
Click to expand...
Click to collapse
yes.. they have differences.. if you control the codes on the seller sites you can see that they are different and incompatibles. it seems also that i9506 is a little brighter and larger. anyway the product codes are different
Hello.
So? Is there any happy ending?
I have changed display from i9505 too. and Phone is hanging, turning off and overheating...
Im interested if this is because of different display or because phone was wet when damaged display...
update: removed Antenna + Loudspeaker. phone still hot. but works now. So i do not believe that it is because of screen....
adrenalinas said:
Hello.
So? Is there any happy ending?
I have changed display from i9505 too. and Phone is hanging, turning off and overheating...
Im interested if this is because of different display or because phone was wet when damaged display...
update: removed Antenna + Loudspeaker. phone still hot. but works now. So i do not believe that it is because of screen....
Click to expand...
Click to collapse
hey, nice to hear that it might not be the screen, for me the result is still unknown. My device was not working after letting them put i9505 display in it. It worked for quite an hour, than it restarted very very often and suddenly it didnt do anything at all. No Download mode or recovery mode too.
The shop said, that the software was completely deleted for no reason. but they flashed the firmware again but the problem with rebooting and after all having a "dead" device was still there. Now they are trying to find whats cauing this problem, and the will send it to samsung if they dont have a plan what it could be ( but i definetly know, that it has to do something with the screen, because earlier, befrore the display change, EVERYTHING worked fine!).
Im so excited how it will end, and especially, who is going to pay, if samsung has to repair what the shop has done wrong
Its really interesting....
I think they could break something when disassembling screen... It was quite difficult to remove some flexible cables as they were stick to screen.
If you have Samsung warranty then you can take only to Samsung dealers to repair, otherwise you loose warranty. That's how it is in my country.
update: My s4 was dead for half a day. but now fully working. have already flashed recovery and rooted... works like a charm
(it were restarting sometimes, after rooting restarts somehow have stopped)
adrenalinas said:
Its really interesting....
I think they could break something when disassembling screen... It was quite difficult to remove some flexible cables as they were stick to screen.
If you have Samsung warranty then you can take only to Samsung dealers to repair, otherwise you loose warranty. That's how it is in my country.
update: My s4 was dead for half a day. but now fully working. have already flashed recovery and rooted... works like a charm
(it were restarting sometimes, after rooting restarts somehow have stopped)
Click to expand...
Click to collapse
finally i think (and i hope) i got a solution. Thex have ordered a i9506 display unit and finally understood that theyve done something wrong. now they will try to fix it and see if the fault was caused by the screen or not ^^ in some days i will now more
Well after trying to learn a bit about difference between i9505 and i9506 and shv-e330s i came to a conclusion that they might be the same device if samsung didnt magically decide to complicate things. I9505 and i9506 have different hardware and their displays are obviously not interchangeable. But, nowhere on the entire frickin internet was i able to understand is i9506 actually shv-e330s. Or are their screens compatible. So i asked samsung like this:
Hello! I would like to ask is there a possibility to replace a broken display on SHV-E330S S4. My father purchased the phone in South Korea and brought it to Croatia, but the phone fell and broke the LCD display. I am trying to find the display for SHV-E330S but I cant find any on the internet. My questions are - can I order a replacement display from Samsung directly? Or can I use the display for i9506 S4? They seem to be same variations regarding hardware inside, except for the DVB tuner antenna for SHV-E330S. Thank You in advance for Your answer.
Their response was just that they cant offer service outside of korea and that they are very sorry. Havent even mentioned the question about i9506 and shv-e330s.
So there ya go. You got shv-e330s outside korea? No help.
different screens
Hello there,
yes it is a different screen
I suppose it is interchangeable because I9500 or I9505 screen (I can't remember exactly) is working fine on my phone. BTW, I got the part and replaced by myself.
But, please note if they replaced your front panel as well, probably your MB was damaged. The front panel is a different one.
---------- Post added at 11:32 AM ---------- Previous post was at 11:24 AM ----------
http://www.ebay.com/itm/LCD-Housing...ent-For-Samsung-Galaxy-S4-I9506-/361134642999
http://www.etradesupply.com/oem-samsung-galaxy-s4-gt-i9505-front-housing.html
i have ordered from aliexpress i9506 lcd screen will report for goods
unlucky me my phone fall on the side so even tempered glass wasnt broken...
well if u by mistake buy screen of i9506 and u r bieng i9505 just buy back casing of i9506 and it would be ok , atleast it solved my problem with the screen bieng different then the phone . hopefully it helps
Hey,
Yes there seems to be a problem, at least you cannot use a i9506 screen on a i9505 Phone.
Seems to be a Problem with the connector, because the screen works until somewhat applies too much force on the conector (not much, just a tip with the finger is enough), like the backcase does when it is clipped back on. So the connectors might differ on the on the models. Hope this helps someone.
DrAcula04 said:
Hey,
Yes there seems to be a problem, at least you cannot use a i9506 screen on a i9505 Phone.
Seems to be a Problem with the connector, because the screen works until somewhat applies too much force on the conector (not much, just a tip with the finger is enough), like the backcase does when it is clipped back on. So the connectors might differ on the on the models. Hope this helps someone.
Click to expand...
Click to collapse
I sanded down the raised metal bit on the right of the motherboard mounting area. It fits almost but I have that pressure issue. Do you have more info so I can figure out what connector is pushed
Tweakforce_LG said:
I sanded down the raised metal bit on the right of the motherboard mounting area. It fits almost but I have that pressure issue. Do you have more info so I can figure out what connector is pushed
Click to expand...
Click to collapse
It is the screenconector.
Here's a picture:
DrAcula04 said:
It is the screenconector.
Here's a picture:
Click to expand...
Click to collapse
There is no picture
Tweakforce_LG said:
There is no picture
Click to expand...
Click to collapse
Yeah... Somehow i couldn't upload it. Here's a link: https://goo.gl/images/GTyuEt
Hope this helps, and let us know if you have an solution!
Hi. I have a rather weird story please read it. So, some months ago my Note 4 died and it wouldnt turn on anymore with no signs of life. Itried it with a friend's battery and it still wouldnt turn on so i thought that the problem might be with the motherboard so i bought a new motherboard from china. The problem is that even iwth the new motherboard that i just replaced my phone stilll wouldnt turn on! What might have i done wrong? Please help
It's possible you haven't reconnected all the connectors especially one or both of those on the back of the motherboard that click into place.
It's also possible that the failure is for another reason other than the motherboard.
My SM-N910F has recently failed with no prior warning with no indication what's causing the problem. I've tried adding the padding on the eMMC chip trick but that doesn't work for me.
can you please show me where the 2 connectors that need to click are?
Big Elf said:
It's possible you haven't reconnected all the connectors especially one or both of those on the back of the motherboard that click into place.
It's also possible that the failure is for another reason other than the motherboard.
My SM-N910F has recently failed with no prior warning with no indication what's causing the problem. I've tried adding the padding on the eMMC chip trick but that doesn't work for me.
Click to expand...
Click to collapse
can you please show me where the 2 connectors that need to click are?
Look at around 5:56 onwards in this video to see which ones they are
Big Elf said:
Look at around 5:56 onwards in this video to see which ones they are
Click to expand...
Click to collapse
God bless you, you saved my phone