Help can not install android 4.4 on motorola Bravo MB520. - Bravo General

hello, please i need help, I can not install android 4.4 or 4.3 on my bike I get bravo MB520
E: Can not open / sdcard/cm-10.2-20130801-NIGHTLY-mb520.zip
and immediately aborts the installation ... you several times and even with jdownloader .. but still the same and not let me install .. my bravo had android 2.3.6
version 4.4 kitkat it down from here: http://forum.xda-developers.com/sh...oth 4.4 and 4.3 android i get error .. I do??

I made a thread that explains how I got it to work, but it sounds like the problem you are having is different from the one I had. Look at my thread and give it a try, see if it fixes. the problem.
http://forum.xda-developers.com/showthread.php?t=2709602
The step-by-step instructions are on the 3rd post down.

Related

[Q] Unable to install Firmware update

Hi, if this question is already anwered, please lock this thread and redirect me, thanks..
I have a Aurora 4.0 rom, installed on top of stock B512 (as far as I can remember) .
Now, I wanted to try some Jelly Bean goodness, so I tried to update to ICS Official, but I've always failed at STEP2 of the official update procedure. I've read some forums and seen a few advices to firstly go back to the official Gingerbread. Ok, so I've downloaded the B512 (after about 2 hours of googlin and looking for it, if some1 wants it PM me) but the problem is still there - STEP2 of the firware update fails..
sd_update.log (4x this line)
Code:
dload_sd_chk_file_data->dload_sd_chk_ram_data failed!
Someone?thanks

[Q] [q] CLEAN INSTALLATION METHOD OF ANDROID 2.2 to 4.1

HI ALL,
I'm new to this updation process, i need to update my DEFY from 2.2 to 4.1.2. I rooted my mobile already now need to update to 4.1.2. i read the forum related to this issue, but everyone suggesting different methods of installation. can anyone guide me a clean installation method from the scratch.
xcan said:
HI ALL,
I'm new to this updation process, i need to update my DEFY from 2.2 to 4.1.2. I rooted my mobile already now need to update to 4.1.2. i read the forum related to this issue, but everyone suggesting different methods of installation. can anyone guide me a clean installation method from the scratch.
Click to expand...
Click to collapse
why don't you update your kernel from 2.2 to 2.3? And I think 4.1.2rom is not fluency for our defy . if you have the kernel 2.3,you may update to kitcat~
update your phone . you need pay attention to the following list .
1.Use the software named RSD,the file is sbf ,sbf will change your bl,so, you need to know what's your phone bl;
2.you need to now what's your defy's lens,it's red or green;
3.you need a rom which is .zip some rom don't need to think about the kernel but someone discriminate.
o it's the first time I reply in English,if I say something wrong or you can't understand.please forgive it . haha I have a bad English. and I think I need someone to fix my grammer error。and when i speek english I don't know what I said above。。。
THX for the reply
mdeche101644 said:
why don't you update your kernel from 2.2 to 2.3? And I think 4.1.2rom is not fluency for our defy . if you have the kernel 2.3,you may update to kitcat~
update your phone . you need pay attention to the following list .
1.Use the software named RSD,the file is sbf ,sbf will change your bl,so, you need to know what's your phone bl;
2.you need to now what's your defy's lens,it's red or green;
3.you need a rom which is .zip some rom don't need to think about the kernel but someone discriminate.
o it's the first time I reply in English,if I say something wrong or you can't understand.please forgive it . haha I have a bad English. and I think I need someone to fix my grammer error。and when i speek english I don't know what I said above。。。
Click to expand...
Click to collapse
thx for ur reply..:good:
my mobile model: Motorola Defy MB525
lens: green
Kernel version: 2.6.32.9
Firmware version: 2.2.2
1. can i install ROM MANAGER from play store and install the CWM and start the OS installation process??
2. while viewing other forums review..most of them suggesting 4.1.2 by Quarx is good.
Whats ur suggestion?? and ur English is good..everyone can easily understood
reply
xcan said:
thx for ur reply..:good:
my mobile model: Motorola Defy MB525
lens: green
Kernel version: 2.6.32.9
Firmware version: 2.2.2
1. can i install ROM MANAGER from play store and install the CWM and start the OS installation process??
2. while viewing other forums review..most of them suggesting 4.1.2 by Quarx is good.
Whats ur suggestion?? and ur English is good..everyone can easily understood
Click to expand...
Click to collapse
:victory: Sorry ,I hadn't used it ,the phone is my mother's.when she gave me ,I updated it to miui ,and the others,I think some of them is not beautiful some is very slow.so , then i used mokee42.2 ---mokee43---mokee44---cm11.... It's Q's the latest rom. now I think cm11 ‘art’ model is very good~
Kernel version: 2.6.32.9don‘t care of this.
take notice of :lens: green....Firmware version: 2.2.2
and bootloader: my bl=6
some roms ignore the bl .but some like The official package need it.

[Q&A] [ROM][A500 & A501] Android 4.4.4 (OmniROM unofficial)

Q&A for [ROM][A500 & A501] Android 4.4.4 (OmniROM unofficial)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][A500 & A501] Android 4.4.4 (OmniROM unofficial). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Android 4.4.4 on Acer A500 Working Partially
I was running ICS 4.03 and installed the 4.4.4 from this thread:
http://forum.xda-developers.com/showthread.php?t=2705989
Using Skrilax V9 bootloader and CWM 6.0.4.5.
Omnirom Kitkat loads up fine but cannot restore apps through Titanium Backup and as it reports no Root access.
Also Google Play cannot locate this device but I can log in and see my apps using the stock Browser that was installed.
Made several attempts with Google Android Manager to no avail.
I assume this custom ROM has root access correct? If true, don't understand why Titanium Backup is complaining.
Location is set for Wi-Fi and mobile network to determine location.
So for now cannot restore my apps locally via Titanium Backup until I get to the bottom of the issue.
Your guidance appreciated as well as the work to make this ROM available to such a broad audience.
DISREGARD, I am getting everything working in the light version.
Rom for Acer A500
Hello I am new to the forum and also the modding and not perlo language very well.
I tried to flash the recovery "update-recovery-thor2002ro-rev1.7.3" the "OmniROM-4.4.4-Tegraowners ROM v21" the work went well but sometimes I crash.
Can you tell me what is currently the OmniROM 4.4.4 better and more stable than those in the first page, and if I can flash with the current recovery, (update-recovery-thor2002ro-rev1.7.3), pointing to the steps to do because I lost in the discussion not knowing the language in fact I am using the translator.
thanks
Hello!
I can flash the OmniROM KitKat front page having the recovery "update-recovery-thor2002ro-rev1.7.3"?
thanks
ugor84 said:
Hello I am new to the forum and also the modding and not perlo language very well.
I tried to flash the recovery "update-recovery-thor2002ro-rev1.7.3" the "OmniROM-4.4.4-Tegraowners ROM v21" the work went well but sometimes I crash.
Can you tell me what is currently the OmniROM 4.4.4 better and more stable than those in the first page, and if I can flash with the current recovery, (update-recovery-thor2002ro-rev1.7.3), pointing to the steps to do because I lost in the discussion not knowing the language in fact I am using the translator.
thanks
Click to expand...
Click to collapse
I used the instructions found at the beginning of the 4.4.4 Light version thread as the full version gave me issues. I didn't use the Thor recovery, Skrilax version 9 instead.
http://forum.xda-developers.com/showthread.php?t=2792022
GPS not working
I am using A500 and I have instaled Android 4.4.4 ROM based on Omnirom KitKat (build 6).
The instalation was successfully completed, I think so because there was no errors. This is my first time so I havent any expirience.
See attachment pictures...there is no GPS. Any sugestion, why?
Thanky you.
EDIT: I add one more picture to see how it was before.
gapps for omni ROM 4.4.4
I just got these gapps to work on my a500
http://forum.xda-developers.com/showthread.php?t=2397942
I had to wipe the system and reflashed the ROM and gapps
I'm using the pico version. Hope that helps
Sent from my Acer iconia A500
Great rom
jenko1447 said:
I just got these gapps to work on my a500
http://forum.xda-developers.com/showthread.php?t=2397942
I had to wipe the system and reflashed the ROM and gapps
I'm using the pico version. Hope that helps
Sent from my Acer iconia A500
Click to expand...
Click to collapse
Wasnt sure where to say thanks. So I decided to put it here. Thanks for all the hard work the rom is awesome!!
Can I install build 8 overtop of build 6?
Can I install build 8 overtop of build 6? What I mean by that is can I install build 8 without wipeing data in CWM because I already have build 6 installed and I have the same ROM so can I?
Loss of Root
Has anyone else lost root with build 8?
flickering screen with Facebook?????
I installed v6 of omni ROM on my Acer a500, and just updated to the newest version. Both ROMs are am some and smooth, but I have just one issue when I have Facebook open for a few minutes, I go to scroll down then the screen starts to flicker and I can't do anything. And to use it again I have to reboot otherwise I just get a black screen. It happens on both versions of the ROM, anyone else have this issue???. Thanks for any replies
Hello , I am trying to flash this rom on my Acer a500 and I get this error :
This package is for "picasso.a500" device this is a "ventana".
E:error
Status (7)
Could anyone help me with this issue?
Lockups
yeah i have been having a few issues along the same lines, i think its more to do with disk 'bandwidth' usage than the cpu. With low data throughput apps running it will run for days without issue, start downloading at 500kB/s (or sometimes as little as 370kB/s) and do some other disk intensive task and pop its gone! this could be biased a bit by my experience of it as i quite often use the A500 to dl things or load it up with stuff before a journey etc.. have also had it get stuck in deep sleep modes but think thats the disk issue as well...
Could it be overfilling it disk buffers or something? not much experience with android hardware but this tablets a bit old now and new roms may be expecting the inbuilt storage to be performing a little faster than the a500's can deal with
Also have tried all the available i/o schedulers and none seem to have and noticeable difference in time between hangs, although without bothering to setup proper test conditions i cant really say much really
oops was meant to be in reply to http://forum.xda-developers.com/showpost.php?p=60787006&postcount=293 meh....
LNX partition not loading?
Hello and sorry if it's an easy question but it's my first time trying to install roms. I've followed http://forum.xda-developers.com/showthread.php?t=2705989 to install OmniRom 4.4.4 on my iconia A500. I installed Skrilax bootloader V9 and then CWM 6.0.4.5 on my device and up to now everything worked well. I then put OmniRom 4.4.4 build 8 and gapp pico on a micro sd card, wiped data using CWM then install the rom (from /storage/sdcard1) then installed the gapp (also from /storage/sdcard1), then wiped cache partition and rebooted. I've been stuck on the Skrylax "booting android image from LNX partition" for half an hour now... Where did I make a mistake?
Stuck on startup logo
hi
please help me
i installed kitkat ROM and mini gapss
and after restarting the tab stucked in startup logo
what is the cause & what shall i do to overcome that
and thx
Step by step guide
Hi guys. i'm a noob at this. i had earlier successfully rooted by Samsung Galaxy S Plus with CyanogenMod, but am at my wits end with rooting my A500. The process seems very complicated, with each page leading to another and resulting in multiple downloads. could someone please give a step by step guide with all downloads listed in sequence. screenshots would be great help. thanks in advance.
Using TWRP-2.6.3.0 to install Omni 4.4.4
Hi all,
Just want to know if it does matter to use TWRP-2.6.3.0 (instead of 2.6.3.1) to install Omni 4.4.4...???
Anyway, the installation went through w/out any issue. I'm using my revived Acer-A500 (was bricked for almost 2 yrs).
W/out this XDA-Dev's great resource, I would not be able to revive my bricked Acer-A500 & running Omni 4.4.4 (CM-11) now.
Many thanks to everyone on the board, especially, Skrilax, blackthund3r, civato & all the great XDA-Dev team...!!!
Cheers,
JKS

Upgrade CM12.1 to CM13

Hi, I am new to Android upgrade. I know only OTA upgrade in phone. Can any one please explain me step by step instructions to upgrade my Storm. It keeps saying Google apps stopped working, and many other error with google. Now I am unable to use settings -> Apps . As soon as I open chrome or settings->apps it says stopped working. So, I made my mind to upgrade to any stable version if any updated. I have found that there is CM13 available. But, do not know what has to be done. As some where I read to install kernal / TWRP / image ,etc. But, I am really not Android Savy and do not know all these terms or exactly what I should do and what I have to do. Please Please give me step by step complete instruction what I have to download and how I can update my Storm with CM13. One more question is CM13 and Android 6.0 "Marshmallow" both same? This might be very dump question.

HELPP!!! Porting Pac Man Rom Gives me an Error (Error 7)

Hi Guys! So, let me explain.
I'm new to this whole thing about rom porting and i really wanted to expand the library for my Moto G4 Play, because i always wanted to channge the roms and play with the phones a littlebit, but the pones i used didn't have support.
So, i like Pac Man Rom (and im sad that is outdated) and i wanted to port it to the Moto G4 Play because i didn't saw it anywhere.
In the first time, i got a build and i was euphoric to install it but when i got it on the internal memory and tried to install it, it gived me the following error:
Error 7: "System partition have unexpected OTA after update"
Please, if you can help me solve this problem and solve it that would be awesome.
Im going to upload the rom zip so you can play and tell me what's happening.
The android version is 6.0.1
Base rom: Lineage 13
Moto G4 Play (Harpia)
Test Phone: Moto G4 Play XT1607
I can't paste the link on the thread so to download it you can dm me on twitter or in xda and i will send you the link.
Sorry!
Thanks!

Categories

Resources