Database Users

Mobile Network State Disconnected - AOKP [Release] Build 38

Just installed:
AOKP [Release] Build 38
was running:
[DEV][RC5] Team Nyx [Android 4.0.4] (ICSSGS)
After the install of AOKP when I boot into to system the Signal bars for the netowrk are Gray instead of Blue.
I look into System Settings --> About Phone. and it says "Mobile Network State Disconnected"
I try to surf the web, doesn't work.
I can make and receive phone calls.
Baseband version: I9000XXJVU
Kernal Version: 3.1.10_IctGlitch_V14-B6_I9K-T959D [email protected] #1
When I was running Team Nyx I didn't have this problem.
The Kernal version I was running with Team Nyx was [Kernel][ICS] Devil2_0.94 [24/05/12].
Will installing a different version of the Kernal fix it? or a different modem?
If so, which one should I try and where do I get it?
BTW, I am in Saskatchewan (Canada).
Thanks,
Chad

So I figured it out, for some reason I needed to enter in Access Point Name manually.
Not sure how this will work if I am roaming and happen to need to connect to a different network.
I don't know why this ROM wouldn't pick up this info its self and the other ROM's I have tried all worked. Anyone have some incite into this?
Thanks.

ICS source and custom wifi driver (encrypted networks do not work)

Hi to all.
I'm working with Amlogic ICS M3 source tree... I have to implement latest Realtek 8192cu wifi driver to source tree.
I'm having problems connecting to any kind of encrypted wifi network. Open networks works just fine.
What I did:
- remove all amlogic wifi stuff
- overtook wpa_supplicant_8 from AOSP ics-mr1
- integrated realtek patches to wpa_supp, init.rc, BoardConfig... as described in realtek's sdk
- integrated driver in kernel, wifi module is built as module, cfg80211 is built-in
- I'm not using wext but nl80211
- kernel is Amlogic 2.6.34 release
Now crossed my mind that wifi.c/wifi.h from libhardware_legacy I obtained from CM ics branch.... maybe that could be a problem?
Any hint?
Regards

[Q] Defy+ wifi problem

Hi!
I have a Defy+ and i flashed the latest Quarx build with the custom kernel and if i connect to the wifi after a few minutes or few downloaded MBs it's stops working-so wifi signal is OK but no connection!On motoicegun cm9 rom wifi works very well,but i want to enjoy the smooth quarx build
Anybody some idea?A clean install might help?My base is 2.3.6 BL7

Please ask all questions in the Q&A section. Thread moved there.

Nothing????Somebody please help me!!!

mihione said:
Hi!
I have a Defy+ and i flashed the latest Quarx build with the custom kernel and if i connect to the wifi after a few minutes or few downloaded MBs it's stops working-so wifi signal is OK but no connection!On motoicegun cm9 rom wifi works very well,but i want to enjoy the smooth quarx build
Anybody some idea?A clean install might help?My base is 2.3.6 BL7
Click to expand...
Click to collapse
Try turn off the "avoid poor connection" option in Wi-Fi - advanced.
Thank if I was helpful.
Cheers
Sent from my Awesome Defy!

got the same problem
"avoid poor connections" on my defy is disabled
(red lens, newest CM10 from Quarx (but on earlier builds also))

Wireless security
Try changing the security on the wireless router. For me WiFi was useless until I changed from WPA2-PSK to WPA-PSK.
Right now I'm not at home so I can't tell if this stands for the new update as well. Worth a try.

My brother have a green lense defy and it's working very good at the same router and same build,but my defy+ doesn't.
Avoid poor connections is disabled :/

It's a very common problem, some have it, some never experience it. Sometimes a router firmware upgrade helps, sometime editing the tiwlan.ini and turning off the N mode. I thought it would be easier to start with the router and if you are feeling brave then
1. Use the Root explorer, open this file path: “/etc/wifi/”,
2. Make a backup and use the file editor to open the “tiwlan.ini”.
3. Find this two lines below, change the value if it is not 0.
HT_Enable = 0 # 0=diable 802.11n support
BurstModeEnable = 0 # 0 - Disabled 1 - Enabled
4. Save the file, then reboot your Defy.
This approach never helped me but who knows...
But still, you should start with the router really.

changing 1 to 0 worked...
thanks for the last post....
worked for me..:good:.

Thank you!I upgraded my router firmware and it's working!!!I hope it will be working on the most routers not only at home

You're Welcome
You're welcome, glad to help, but yeah it's a serious problem and you can't update every router's fw
De ha akarod megpróbálhatod, csak kérlek fényképezd le az arcokat amikor bejelented, hogy "Nem megy a Defy-m önöknél, frissíthetek routert? :laugh: "

Firefox os

Bro's and dudes of xda,here I have ported the Firefox os for HTC Desire C. Base Rom is AOSP,Firefox os is keon mobiles 18th platform. In this port we can set the network carrier manually,but not automatically.and nightly build platform 26 we can't set the carrier manually because cellular&data is not enabled to select ,so the network is no working. Does anyone know how fix that. Pls help me an awesome Firefox os is waiting for you:thumbup::thumbup:

For auto config network
Go to /b2g/gaia/shared/resource/apn.xml
Add you network information here
I have this problem in nexus4 (carrier Thailand : Dtac trinet)

No option to add hidden SSID with 802.1x EAP for Security?

A month or two ago, when I was on 10.3.12 or 11.0.3 Stable, I successfully Added WiFi network with hidden SSID, and with Security set to 802.1x EAP (as required for the WiFi network at my workplace).
Later, I upgraded by OTA to 11.0.4 and I was still automatically connecting everyday to that WiFi network at work.
Today when I unlocked Bootloader I found that my home WiFi networks were successfully backed up and restored over Xiaomi Cloud, but I lost that WiFi network for work
I wanted to set it up again, but now I can no more choose 802.1x EAP for Security (only None, WEP, WPA/WPA-Personal and WPA/WPA2-Enterprise options are available)
Can somebody else try to add a WiFi network for hidden SSID, to check if he has the option to choose 802.1x EAP for Security.
I don't know was it lost with 11.0.4 or due to the unlocked Bootloader (?)

Have you checked under WPA Enterprise? EAP settings are there for AOSP ROMs. I'm using PA and have the options, I would assume MIUI is similar?
I have attached a screenshot of how it looks under PA.

jc2048 said:
Have you checked under WPA Enterprise? EAP settings are there for AOSP ROMs. I'm using PA and have the options, I would assume MIUI is similar?
I have attached a screenshot of how it looks under PA.
Click to expand...
Click to collapse
Thank you a lot, I will try tomorrow with PSA2 Enterprise.
Indeed,. everything else matches how I need and I previously had
And it makes sense, based on:
https://en.m.wikipedia.org/wiki/Wi-Fi_Protected_Access
https://documentation.meraki.com/MR...tion/WPA2_Enterprise_Profile_Setup_on_Android
jc2048 said:
Have you checked under WPA Enterprise? EAP settings are there for AOSP ROMs...
Click to expand...
Click to collapse
Edit:
Thanks a lot, yes it works with PSA2 Enterprise instead of 802.1x EAP

THREAD LOCKED
Requested by OP.
Regards,
shadowstep
Forum Moderator