I have found the solution to this horrible problem
[PROBLEM] error:[D14] Streaming hello Failed! error: Download fail!
Unbrick your Dell Streak!
Contact me anytime
- Private Message
- AIM: SiscoAIM
- Call/Text:Mod Edit, please do not put phone numbers in open forum thanks
soarly
Hi I hope you can help. The good news is I finally got the ota 2.2 update and also unlocked my att dell streak. I should have stopped there. I tried rooting it with superoneclick and now I have a bricked streak. It is stuck on the dell logo and will not boot further when I try to run recovery. it attemps to do a factory reset but gets stuck again on the boot screen. I cannot run the recovery package off the sd card for the same reason? I am not sure if there is a recovery package on the sd. Any advice would be greatly appreciated.
brandonsisco said:
I have found the solution to this horrible problem
[PROBLEM] error:[D14] Streaming hello Failed! error: Download fail!
Unbrick your Dell Streak!
Contact me anytime
- Private Message
- AIM: SiscoAIM
- Call/Text:Mod Edit, please do not put phone numbers in open forum thanks
Click to expand...
Click to collapse
Mine doesn't say Streaming failed by it is the d14 error mine says error D14 run Hex failed. see bottom of log any help?
###QDLTool: M 2.7.4.8, build ID: 1.301.20101022, time stamp: Fri Feb 08 11:46:37 2013
Check image DBL: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\dbl.mbn ...
Check image FSBL: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\fsbl.mbn ...
Check image OSBL: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\osbl.mbn ...
Check image AMSS: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\amss.mbn ...
Check image DSP1: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\dsp1.mbn ...
Check image APPSBL: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\appsboot.mbn ...
Check image DT: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\DT.img ...
Check image boot.img: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\boot.img ...
Check image system.img: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\system.img ...
Check image userdata.img: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\userdata.img ...
Check image recovery.img: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\recovery.img ...
Check image logfilter.img: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\logfilter.img ...
Check image Region: C:\Streak\R288920\QDLTool3rd_20101022_GAUSB1A130500\images\RC_us.img ...
Check images: Partition Dbl Fsbl Osbl Amss Dsp1 DT Appsbl Boot System Userdata Recovery LogFilter RCFile
Check images ok
Download in speedup way
Open COM port success
OSBL version: 12-5035-AUSB1AM-09
osbl.mbn version:
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Baseband image version: M8650BAUSB1AM5035SIGN
Check device and image is Austin
Open COM port success
Check Secure Boot is enabled
#Set Fast Boot Flag success
Open COM port success
Test communication success
Check Secure Boot is enabled
#DBL to DDR success
#FSBL to DDR success
#OSBL to DDR success
#DT to DDR success
#backup FSBL to DDR success
ERROR[D14]: Run HEX Failed!
ERROR: Download fail!
Please remove the battery and try again.
Wait for modem set up ......
Hey! Sorry if this question has been asked a ton of times, but I need the bootloader sbf for the Droid 2. I currently have D2.37 on there, but after doing an sbf for a reset, RSD Lite 5.5 would say "Failed flashing process. Failed flashing process. INterface BP: Error sending RAM download for bootloader. Device API Error: 0xE003003F Address: 0x196000 Command: ADDR (0xE023203F); phone connected". If I tried to boot the phone, it would say "Code Corrupt". Any searching I've done says that I need to reflash the bootloader. I've been trying to find it, but any mirrors of it are down, such as the ones located here: http://and-developers.com/sbf:droid2
So I must ask, does anyone have the sbf files I need?
Hello my name is William!
I am new here so if this is the wrong place just tell me (oh and I'm dutch sorry if bad grammar occurs)
so I was rooting my lovely moto X play according to instructions (somewhere on this forum)
everything went well until... I had to install superSU after that it was stuck on ''warning your bootloader is unlocked''
I realized that it was soft-bricked and downloaded a stock rom (XT1562) from this forum in the hope to re-install or flash my phone back to it's stock rom but.. ofcourse my unluckiness had to strike again, when I typed in ''fastboot flash partition gpt.bin''
it said: ''(bootloader) preflash validation failed FAILED (remote failure)''
now I don't know what to do anymore, I am really getting desperate on getting my phone working again.
Can someone please tell me how to revert all this? (if it is possible) :crying:
I am not world's smartest man so just giving keywords won't really help me.
if it helps some info from my bootloader:
AP Fastboot Flash mode {secure)
BL: 80.ED (sha-6e42a5a. 2015-12-17 13:24:41
baseband: <not available>
Product/Variant: Lux XT1562 16gb P2C
Serial number: ZY222Z2N2T
Device is UNLOCKED: Status Code 3
Software status: modified
and I WAS running the most recent android 6 version (marshmallow)
in advance Thank you for trying to help me!
Hello - need help:
My Phone has HTC Bootloader - but says:
*** UNLOCKED ***
htc_ocedug1 PVT S-ON
LK-1.0.0000
[email protected]
OpenDSP-UNKNOW
OS-1.62.400.1
May 11 2017, 15:56:13(925380)
The problem is that the phone always downloads the actual HTC systemupdate - starts it and then craches after 26%. So i decided to re-flash the phone with the stock rom. So i gut the following stock rom file where i guess it's teh rightz one: 2PZFIMG_OCEAN_NOTE[email protected]70502_53.34_release_503372_signed_2_4.zip
The size of the files is 1.87 GB. I guess it's the right file. Then i copied the file into the ADB directory of my pc and renamed it to "HTCROM.zip"
And that what happens:
PS C:\adb> adb reboot download
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
PS C:\adb> fastboot oem rebootRUU
...
OKAY [ 0.000s]
finished. total time: 0.000s
PS C:\adb> fastboot flash zip HTCROM.zip
target reported max download size of 1579200000 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 1960968042 is not a multiple of the block size 4096
sending sparse 'zip' (0 KB)...
error: write_sparse_skip_chunk: don't care size 1960968042 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 1960968042 is not a multiple of the block size 4096
OKAY [ 1.009s]
writing 'zip'...
(bootloader) HOSD CL#925380
(bootloader) ERR lzipv1_init : Cannot read header len bytes
(bootloader) ERR lzipv2_init : Cannot open file /dev/fastboot_download_r
(bootloader) 6Nf2a
(bootloader) ERR preload central directory info failed (EOCD).
FAILED (remote: 99 RU_UNKNOWN_FAIL terrible mishap with original ret: 0)
finished. total time: 2.072s
What's wrong???? How do i get ma HTC U ULTRA back to 100% stock - so that it makes the Standard HTC Updates?
Thanks for help!!!!
Did you try the another method?
1. Rename zip to 2PZFIMG.zip
2. Place it on the root of the micro sd card.
3. Reboot the phone into bootloader or download mode and it'll automatically ask to flash the ROM.
razarahil said:
Did you try the another method?
1. Rename zip to 2PZFIMG.zip
2. Place it on the root of the micro sd card.
3. Reboot the phone into bootloader or download mode and it'll automatically ask to flash the ROM.
Click to expand...
Click to collapse
Doing this results in: 19 RU_MAIN_VER_FAIL os-version in android-info missing or i
But the OS Version is correct. The problem may be that the bootloader on my phone is unlooked. I also need to relook the bootloader - but i was thinking that flashing will do the job
Please help me to get back to 100% stock for my HTC Ultra
My Phone is a HTC U Ultra U1-u 2PZF200. The only thing i did was going to dev. mode and then also unlooked the bootloader with HTC web page.
I also have the red warning "this build is for ...." when i boot the phone.
I think you're flashing the wrong build, search the build which is compatible with your cid number.
razarahil said:
I think you're flashing the wrong build, search the build which is compatible with your cid number.
Click to expand...
Click to collapse
That's possible because my phone has a strange CID:
GSM version: [email protected]_53.34
Android version: 7.0
Model name: HTC U Ultra
Manufacturer: HTC
Device code: htc_ocedugl
Product name: ocedugl_00400
Product version: 1.62.400.1
Bootloader version: 1.0.0.0000
Cid: HTC__060
Ram: 4GB
Protected: true
Build line: OceanNoteDUGL_SEA_IND_N70_CRC_Sense80GP_Stable
Build changelist: 925380
Build characteristics: default
Build UTC: 1494487447
Build date: 四 5月 11 15:24:07 CST 2017
Build descriptor: 1.62.400.1 8.0_g CL925380 release-keys
Build display id: NRD90M release-keys
Build project: OCEAN_NOTE_DUGL_N70_SENSE80GP:503372
CID HTC_060 is somewhere India I think. Where can I find the correct Firmware? Or does it makes sense to change the CID to supercid? If I do so does the phone makes in the future automatic system updates?
HTC-Maus said:
That's possible because my phone has a strange CID:
GSM version: [email protected]_53.34
Android version: 7.0
Model name: HTC U Ultra
Manufacturer: HTC
Device code: htc_ocedugl
Product name: ocedugl_00400
Product version: 1.62.400.1
Bootloader version: 1.0.0.0000
Cid: HTC__060
Ram: 4GB
Protected: true
Build line: OceanNoteDUGL_SEA_IND_N70_CRC_Sense80GP_Stable
Build changelist: 925380
Build characteristics: default
Build UTC: 1494487447
Build date: 四 5月 11 15:24:07 CST 2017
Build descriptor: 1.62.400.1 8.0_g CL925380 release-keys
Build display id: NRD90M release-keys
Build project: OCEAN_NOTE_DUGL_N70_SENSE80GP:503372
CID HTC_060 is somewhere India I think. Where can I find the correct Firmware? Or does it makes sense to change the CID to supercid? If I do so does the phone makes in the future automatic system updates?
Click to expand...
Click to collapse
Yes CID 60 is for the Indian version. Try to do it by relocking the bootloader.
razarahil said:
Yes CID 60 is for the Indian version. Try to do it by relocking the bootloader.
Click to expand...
Click to collapse
Relooking the bootloader does not work. I tried:
fastboot oem look
but the result is "Command Error"
Even chimera tool is not be able to relook the bootloader...
Does anybody know where i can get the correct flash to go back to 100% stock? I think this is may the best way.
HTC-Maus said:
Doing this results in: 19 RU_MAIN_VER_FAIL os-version in android-info missing or i
But the OS Version is correct. The problem may be that the bootloader on my phone is unlooked. I also need to relook the bootloader - but i was thinking that flashing will do the job
Please help me to get back to 100% stock for my HTC Ultra
My Phone is a HTC U Ultra U1-u 2PZF200. The only thing i did was going to dev. mode and then also unlooked the bootloader with HTC web page.
I also have the red warning "this build is for ...." when i boot the phone.
Click to expand...
Click to collapse
Mate my bootloader was unlocked from HTC Dev, when I put the zip file in the root of my SD card. I didn't get any errors and successfully reverted back to stock. I reckon the issue might be the zip file you are using. Download and flash this:
https://www.androidfilehost.com/?fid=817550096634794461
It worked for my dual sim HTC U Ultra, OS was same as yours 1.62.400.1
nealzXincredible said:
Mate my bootloader was unlocked from HTC Dev, when I put the zip file in the root of my SD card. I didn't get any errors and successfully reverted back to stock. I reckon the issue might be the zip file you are using. Download and flash this:
https://www.androidfilehost.com/?fid=817550096634794461
It worked for my dual sim HTC U Ultra, OS was same as yours 1.62.400.1
Click to expand...
Click to collapse
Thank you!! This worked out for me - now i'm back to stock - but the bootloader is still unlooked. I need to get the bootloader "Locked" (and not Re-locked). I was thinking that this works with going back to stock - but did'nt. How can i get it locked?
HTC-Maus said:
Thank you!! This worked out for me - now i'm back to stock - but the bootloader is still unlooked. I need to get the bootloader "Locked" (and not Re-locked). I was thinking that this works with going back to stock - but did'nt. How can i get it locked?
Click to expand...
Click to collapse
Why do you want to get the bootloader "Locked?" If you are worried about OTA's don't worry, since flashing the stock Rom I have received two OTA updates on my phone and my bootloader is still unlocked.
For any other purposes if you want to relock the U Ultra bootloader, you can do so by running following fastboot command: fastboot oem lock. This will format all the data on your phone. You must realize that since you have already unlocked your bootloader once, the only way to get it locked again is by re-locking it.
Hi
I want to downgrade to 7.0 to marshmallow but I can't, ever time fail
I follow the guide: "[x force] how to manually..."
And showme <bootloader> preflash validation failed
And with rsd lite: phone returned fail ...
I can't found a guide to downgrade 6.0 for moto x force kinzie
my device says in fastboot:
BL a8.56 (sha-09a6....
Baseband: M8994_1255339.41.01.92R KINZIE_LATAM_DSDS_CUST
Protuct/Variant: kinzie xt1580-ds 64gb P301
Serial number: ZY...
CPU: MSM8994
eMMC: 64gb toshiba.....
DRAM: 3072MB ....
Console: [NULL]: null
Battery OK
Device is LOCKED. Status Code: 0
Software status: Official
Transfer Mode: USB Connected
Sorry for my bad english
Bump!
Hello,
You cannot downgrade your Android version with the Verizon-model Droid Turbo 2. The Verizon-model has the bootlocker locked to a point where you are unable to rollback. Until someone cracks that code, you are stuck with whatever silly updates are pushed out. I feel your pain; I've had major issues since the most recent software update on my DT2.