Hi, I'm probably being very idiotic atm but I can't think of any logical issues.
I'm using the Samsung Galaxy S4 i337.. I downgraded from NB1 to MK2, got root, installed safestrap, and attempted to install this: http://forum.xda-developers.com/showthread.php?t=2544474
It was my understanding this came with Loki-Doki (saw it floating around in a different thread asking if it worked, can find it if nessecary) as a patch. So I downloaded and backed up my stock install, and attempted to install this.
Now the problem is when I boot, it returns me to a bootloop, if you could call that progress.. It vibrates occasionally while bootlooping (samsung - safeboot - blackscreen - vibrate - samsung....). I still have access to safestrap, download mode and so on, if it helps at all. I've also tried http://forum.xda-developers.com/showthread.php?t=2537495 WITH loki-doki (as it is explicitly stated) to no success either..
I'm looking for one of two solutions;
how to get stock firmware back, or how to properly install this? Or any variation thereof. . . I don't know what the problem is ahaha
Bumping to say multiple wipes>reflashes later the blue screen has yet to occur, not sure what that was... Bootlooping is the huge problem now!
You can't use that rom. You need a tw based rom. This one is aosp
Sent from my Nexus 5
jd1639 said:
You can't use that rom. You need a tw based rom. This one is aosp
Sent from my Nexus 5
Click to expand...
Click to collapse
Doesn't the second one work with my phone though? And the comments say 'working on i337'etc on the first one... http://forum.xda-developers.com/showthread.php?t=2537495
It's still giving me the same problems with loki-doki.
Rhymey said:
Doesn't the second one work with my phone though? And the comments say 'working on i337'etc on the first one... http://forum.xda-developers.com/showthread.php?t=2537495
It's still giving me the same problems with loki-doki.
Click to expand...
Click to collapse
It only works if you have mdl firmware and not on safe strap
Sent from my Nexus 5
jd1639 said:
It only works if you have mdl firmware and not on safe strap
Sent from my Nexus 5
Click to expand...
Click to collapse
Guh. Well ****. They should make that more obvious in the OP.. saw no mention of either of those being an issue..
Any similar roms that still have TouchWiz or should I just roll back to OTA 4.4.2?
Rhymey said:
Guh. Well ****. They should make that more obvious in the OP.. saw no mention of either of those being an issue..
Any similar roms that still have TouchWiz or should I just roll back to OTA 4.4.2?
Click to expand...
Click to collapse
Start here http://forum.xda-developers.com/showthread.php?p=49562527
Sent from my Nexus 5
So will it ever be possible to flash AOSP ROMs on NB1?
Not until the bootloader is unlocked. There is no telling when that will be.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Best bet is to find a ROM that you like, then install the Google Experience Launcher apk. It will give your phone the stock google launcher.
Sent from my SGH-I337 using XDA Premium 4 mobile app
Domination Theme will also extensively theme your touchwiz rom to give it a more complete AOSP look without an AOSP rom.
All right thanks for the help guys.
Related
Does anyone know of such a ROM that I can have root, download, deodex, and debloat (but no mods) for the SGH-I337? I'd like to run a pure stock rooted ROM without bloat. I do not want the modded (black) apps with the messaging and etc. Just the full on debloated stock experience with root privileges. No, I do not want a competition with whatever ROM is best as I do not intend to start an argument about it. So, in that case, does anyone have suggestions or the link to another XDA thread? Also, please make sure that it's latest stock for AT&T. Thanks everyone!
Sent from my GT-I9505G using XDA Premium 4 mobile app
Ya could try this one http://forum.xda-developers.com/showthread.php?t=2364635 however how you flash it will depend on what firmware your running now. If your mdf then refer to the safestrap threads for proper flsshing procedures and if yur mdl then follow loki directions. Hope this helps
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
I've been using MDOB for a month or so and it is great. Great battery life, smooth, debloated stock, excellent support -- a great ROM. -- Bud
Let me tell ya I have owned hd2, gs2, gs3, gs4, nexus s , nexus 4,atrix hd,transformer 300tf, galaxy tab 2 7.0 galaxy tab 2 10.1, nexus 7, note 2 ,note 10.1, and note 8.0.
I always go for stock based ROMs for stability. For I instal tons of apps that I get issues one after another on custom. I try ROMs after another update after another. This was like a routine which could be enjoyable but annoying sometimes for ur times limited.
With I337, I tried one ROM and I felt no need or urge to flash or even try another. I just could not find flaws or problem with this one.
Which ROM is this?
MDOB!
Bloat free based on stock and has all features I need. Give it a try. Make sure u follow devs guide on installation though for best possible experience!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
sharpeyedman said:
Let me tell ya I have owned hd2, gs2, gs3, gs4, nexus s , nexus 4,atrix hd,transformer 300tf, galaxy tab 2 7.0 galaxy tab 2 10.1, nexus 7, note 2 ,note 10.1, and note 8.0.
I always go for stock based ROMs for stability. For I instal tons of apps that I get issues one after another on custom. I try ROMs after another update after another. This was like a routine which could be enjoyable but annoying sometimes for ur times limited.
With I337, I tried one ROM and I felt no need or urge to flash or even try another. I just could not find flaws or problem with this one.
Which ROM is this?
MDOB!
Bloat free based on stock and has all features I need. Give it a try. Make sure u follow devs guide on installation though for best possible experience!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Thank you so much BTW, should've thanked you sooner. Flashed MDOB and have been running it for about four days now. Very stable, has those white stock apps, and is absolutely amazing while also running stock kernel. Thanks so much!
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
I am so glad it has been working great for ya. I really wish other android devices that I use also had ROMs like MDOB.
Those add-ons listed on devs post for MDOB also work great as well for they are usually stock/hidden features. For example, torch light is from hidden stock menu and addon will unlock and enable it for you. Addon like in call recording is not an external third party app but it is like unlocking call recording menu within the stock dial/call pad which comes in very handy and convenient. If you have questions then the dev will try to help you promptly. I had minor issues but it was because I did not know how to use the features on ROM correctly. Of coarse the dev tried to help me find solutions along the way. He' s just a great guy and I feel lucky to have him here on gs4 community.
Sent from my GT-N5110 using xda app-developers app
I'm currently using this one
http://forum.xda-developers.com/showthread.php?t=2356276
Was about to post same question!
Hi there,
Thanks for this thread and the answers. I was searching for exactly this topic.
I would like to try the MDOB ROM, as it sounds like what I am looking for.
The current MDOB ROM is based on the *MF3 firmware. Is this an issue? I am reading about the AT&T bootloader lock and loki fix that was added in to MF3, plus other custom ROMs that list either a broken sound or broken Wi-Fi as a known issue with MF3.
Are these issues fixed in this ROM (and how?) I don't want to loose TWRP and/or WiFi.
Thanks for any clarification,
Gemini420
MDOB is based on the lastest stock MF3 however it would not give u problems that you would face from updating to notorious MF3 stock.
If I am not mistaken you are supposed to have UCUAMDL stock rooted with custom recovery twrp (preferably i337 version listed on the MDOB page) prior to flashing MDOB.
Check out installation or flashing instruction on the MDOB for more info. The dev points to several things you should watch out for. I just followed the guide and my phone has been running pefectly ever since. Well I wish u Good luck.
Edit: Though I never had any issues with custom recovery and wifi, you might wanna ask there and see if such issues exist on MDOB.
Sent from my GT-N5110 using xda app-developers app
sharpeyedman said:
MDOB is based on the lastest stock MF3 however it would not give u problems that you would face from updating to notorious MF3 stock.
If I am not mistaken you are supposed to have UCUAMDL stock rooted with custom recovery twrp (preferably i337 version listed on the MDOB page) prior to flashing MDOB.
Check out installation or flashing instruction on the MDOB for more info. The dev points to several things you should watch out for. I just followed the guide and my phone has been running pefectly ever since. Well I wish u Good luck.
Edit: Though I never had any issues with custom recovery and wifi, you might wanna ask there and see if such issues exist on MDOB.
Sent from my GT-N5110 using xda app-developers app
Click to expand...
Click to collapse
Thanks!
Definitely looking for MDOB by iB4STiD my friend
---------- Post added at 09:50 PM ---------- Previous post was at 09:49 PM ----------
gemini420 said:
Thanks!
Click to expand...
Click to collapse
If you look in the MDOB thread you can flash philz recovery. It's like a super CWM recovery...kinda..sorta lol. That's what iB4STiD recommends.
After just playing around with odin.
I think i have found a fix.
I flashed http://downloads.fairview5.com/i337/I337UCUEMJ6_full_wipe.tar.md5.7z through odin and it went through for the first time.
Then i used the pit file called "SGS-I337_16GB.pit" idk where it is but it's on the forums
Note:This will upgrade your phone to 4.3 and there are no root methods for 4.3 as of right now.Plus there might be some problems with the playstore.(i haven't encounter any yet)
Also remember that you can go to bestbuy and ask them to flash your phone so you can stay on 4.2.2. This is for people who just want to fix it now instead of going to a store.
Credit to jball and rayburne for telling me to put the downsides and other opitions
Cool deal buddy
Sent from my GT-I9505 using XDA Premium 4 mobile app
Odischeese said:
After just playing around with odin.
I think i have found a fix.
I flashed http://downloads.fairview5.com/i337/I337UCUEMJ6_full_wipe.tar.md5.7z through odin and it went through for the first time!!!!!!
Then i used the pit file called "SGS-I337_16GB.pit" idk where it is but it's on the forums
And now i have recovery!
Not just recovery, but i have my phone back!!!!
Click to expand...
Click to collapse
isn't that the leaked 4.3 fw?
xuanphucn said:
isn't that the leaked 4.3 fw?
Click to expand...
Click to collapse
Yes and it works like a charm.
I still have no clue why it can flash with odin if you're on MF3, regardless i am happy with it as it is the only rom that you can flash (that i know of) if you're on MF3.
Just a word of caution to anybody who wants to try this, there is no root method for it and playstore is having some issues installing some apps.
Edit, here's the thread discussing mj6 and some of the issues people are having http://forum.xda-developers.com/showthread.php?p=46860747
Playstore?
jd1639 said:
Just a word of caution to anybody who wants to try this, there is no root method for it and playstore is having some issues installing some apps.
Click to expand...
Click to collapse
I am having no problems with the playstore as of right now.I'm downloading over 4gb of apps right now. I'll post back if there's any problems.:good:
After downloading 4GB of apps, there were no problems.
Odischeese said:
Yes and it works like a charm.
I still have no clue why it can flash with odin if you're on MF3, regardless i am happy with it as it is the only rom that you can flash (that i know of) if you're on MF3.
Click to expand...
Click to collapse
I'm MF3 as you know and I'm using Omega V12 4.2.2 and it's a rom .I use Safestrap with no problems
Sent from my GT-I9505 using XDA Premium 4 mobile app
jball said:
I'm MF3 as you know and I'm using Omega V12 4.2.2 and it's a rom .I use Safestrap with no problems
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes but i was talking about flashing with odin though
Some people with the MF3 problem couldn't even get to their stock recovery like me:crying:
This is the only ROM i know of that you can flash with odin on MF3.
Even if you don't have a stock recovery you should have been able to use Safestrap. I don't have stock recovery
Sent from my GT-I9505 using XDA Premium 4 mobile app
jball said:
Even if you don't have a stock recovery you should have been able to use Safestrap. I don't have stock recovery
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I was ****ed big time. I did install SS but like i told you yesterday, SS ****ed up the wiping and it looked like SS just deleted itself. The reason why i said that because SS never came up. My phone never could go past the bootlogo nor bring up the 2 SS options. If i had SS at the time then i would of never came to forums lol
Odischeese said:
After just playing around with odin.
I think i have found a fix.
I flashed http://downloads.fairview5.com/i337/I337UCUEMJ6_full_wipe.tar.md5.7z through odin and it went through for the first time!!!!!!
Then i used the pit file called "SGS-I337_16GB.pit" idk where it is but it's on the forums
And now i have recovery!
Not just recovery, but i have my phone back!!!!
Click to expand...
Click to collapse
Odischeese said:
I was ****ed big time. I did install SS but like i told you yesterday, SS ****ed up the wiping and it looked like SS just deleted itself. The reason why i said that because SS never came up. My phone never could go past the bootlogo nor bring up the 2 SS options. If i had SS at the time then i would of never came to forums lol
Click to expand...
Click to collapse
I'm glad you were able to fix your phone and share with other to help them out, but I feel this title is a little misleading.
Yes you are fixing a soft bricked MF3 phone but the fix is upgrading them to MJ6 4.3. I understand a fixed MJ6 phone is better than a broken MF3 phone but I think it should be mentioned in your instructions. Best Buy is an alternative to fixing your phone and remaining on 4.2.2. Maybe a fix is around the corner for MF3 soft bricks that won't apply to MJ6 devices (yes I agree high unlikely but it should be mentioned this is upgrading the user to 4.3).
Sorry to hear your troubles with Safestrap. I'm on MF3 using SS and not had a problem. I think I have installed most of the 4.2.2 ATT and International Roms without issue. With what you described above about SS, I can only guess that SS has a bug that you encountered that affected your stock slot or you mistakenly wiped or flashed something to your stock slot that hosed your MF3 stock slot. Either way glad you recovered and shared your fix.
rayburne said:
I'm glad you were able to fix your phone and share with other to help them out, but I feel this title is a little misleading.
Yes you are fixing a soft bricked MF3 phone but the fix is upgrading them to MJ3 4.3. I understand a fixed MJ3 phone is better than a broken MF3 phone but I think it should be mentioned in your instructions. BB is an alternative to fixing your phone and remaining on 4.2.2. Maybe a fix is around the corner for MF3 soft bricks that won't apply to MJ3 devices (yes I agree high unlikely but it should be mentioned this is upgrading the user to 4.3).
Sorry to hear your troubles with Safestrap. I'm on MF3 using SS and not had a problem. I think I have installed most of the 4.2.2 ATT and International Roms without issue. With what you described above about SS, I can only guess that SS has a bug that you encountered that affected your stock slot or you mistakenly wiped or flashed something to your stock slot that hosed your MF3 stock slot. Either way glad you recovered and shared your fix.
Click to expand...
Click to collapse
Yeah I was just a little over exited finding a fix and quickly made a title.
I'll edit the instructions a little more...
Thanks for catching my mistakes :good:
Odischeese said:
Yeah I was just a little over exited finding a fix and quickly made a title.
I'll edit the instructions a little more...
Thanks for catching my mistakes :good:
Click to expand...
Click to collapse
Naw man, I'm not claiming you made any mistakes :good:
Just trying to help others who read the OP to fully understand the fix.
I'm just glad you found an alternative fix to Best Buy and shared it with others!
rayburne said:
Naw man, I'm not claiming you made any mistakes :good:
Just trying to help others who read the OP to fully understand the fix.
I'm just glad you found an alternative fix to Best Buy and shared it with others!
Click to expand...
Click to collapse
Ahh ok
what do you think i should rename the title btw???
"Optional fix to a MF3 brick" point of no return
Sent from my GT-I9505 using XDA Premium 4 mobile app
Thanks man, you got me back up and running... I know it's not ideal but it works...
jball said:
"Optional fix to a MF3 brick" point of no return
Sent from my GT-I9505 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
"Optional fix to a MF3 brick point of no return"
the entire quote???
Sure
Sent from my GT-I9505 using XDA Premium 4 mobile app
ok so i have installed JellyBeans rom and im not liking it. im on base version JSS15J.N900VVRUBMJE.
how do i get back to the most updated stock rom on note 3?
Am assuming that you are using SafeStrap. If so, boot to recovery. Go into boot options and activate the "stock" slot. Then, if you want to, you can go in and delete rom slot that you have beans installed on.
Once you activate the stock slot, you'll know it because it will tell you with red text across the top of the screen.
Then just reboot.
IF YOU INSTALLED BEANS ROM ON THE STOCK SLOT, you need to download a copy of the stock odex or deodex rom that beans put together in the dev thread. If this is the case, let us know if you need help before going any further!
♢NoteIII♢
Yes I made a new slot for beans and still have the stock one open. Thanks ill just use the stock slot. Now what about me getting the latest updated stock rom and still keep root, how would I do that?
Sent from my SM-N900V using XDA Premium 4 mobile app
spetzuu said:
Yes I made a new slot for beans and still have the stock one open. Thanks ill just use the stock slot. Now what about me getting the latest updated stock rom and still keep root, how would I do that?
Sent from my SM-N900V using XDA Premium 4 mobile app
Click to expand...
Click to collapse
So the rooted rom on your stock slot is what version?
♢NoteIII♢
LeftyGR said:
So the rooted rom on your stock slot is what version?
♢NoteIII♢
Click to expand...
Click to collapse
MI9
spetzuu said:
MI9
Click to expand...
Click to collapse
Eh...
Best way would mean you'd need to redo root. And that way would be with odin. Unless someone else has a better way?
♢NoteIII♢
ive tried finding out the benefits of the updates that have rolled on on the note 3 and i cant seem to find any... although i have seen people complaining about the battery life and what not.
do you know where i could get a complete list of what the updates bring to phone? because if its nothing major ill just stick to MI9
Honestly, it will be different for every person. Because even though we all have the same phone, Every Phone is just a little different. For example, I am on the current update and felt I needed to because I was having issues with wifi. But if you are on the original firmware, which you are, and you can find no problem with your phone that you would like to see fixed then I honestly don't see any point in updating your firmware if you do not want to. I know that the current version addresses problems people were having with wifi. Along with some other minor changes.
Now having said that... If you encounter any quirks or problems with any current custom ROMs that are listed in the development section, it may be due to the fact that they are built on the current firmware version while you are still two versions behind.
♢NoteIII♢
Welcome to the note 3 forums. We welcome you as long as you do your job and search before making 1,000,000 new threads.
So,You just got your shiny new note 3 and dont know where to begin?
Well that's ok because, this is the all in one thread.
Lets begin
How do I Root?
That is the common question around here. Im going to simplify this.. Here you go
For 4.3
1.The best and safest way is this method by @evilpotatoman. It does require a little work but in return you do get root Here is the link for That,
2.Another method that is faster, but does not offer busybox with install, nor did it originate from XDA-forums is Here,
For 4.4 Or KitKat
You have to Go to My thread located
Here,
This does root KitKat and provides a custom ROM.
How Do I Install Custom Rom's
First What you should know is that our phone has a locked bootloader. This means that we can not boot kernels. But we still can flash custom rom's Thanks to @Hashcode
To install custom rom's on 4.3, Head over Here,
Another method That i originally created, but does not work as good as safestrap, could be found Here
If you are on KitKat, Then you could either install my KitKat rom or wait for safestrap to be updated.
What Do I Do If I Bricked My Phone? Or if it wont boot?
Well There are 2 methods to get you back to stock and running again.
To Restore back to Jellybean (4.3) Follow this Thread Here
To Restore back to KitKat (4.4.2) Follow this Thread Here
Why are Rom's Based off different Bases & Whats the difference?
A little basic intro
MJ5,MI9 & MI1 Are all 4.3 AT&T Bases
Ml2 Is an international 4.3 Base
MlG is a leaked AT&T 4.4.2 Base
Mj5 Is the latest 4.3 AT&T Base
Ml2 Is the latest international Base
The difference depends on what you need. Right now There are pro's and con's to all bases
Mj5
-Fast Data speeds
-Better indoor Signal
-No Bluetooth internet tethering
Ml2
-NO group messaging
-lower signal in areas
-slower data
-Does have Bluetooth internet tethering
Leaked Kitkat base (MIG)
-Extremely fast
-Newer modem with better signal & speeds
-Safestrap is not yet updated to work with kitkat (But you could still install my 4.4 ROM)
Why is my GPS Crappy and How do i fix it?
This issue is well known with our phone. The main reason is bad software coding.
To fix this issue Flash this fix made by me, in safestrap or manually push the files using root explorer.
4.3-Click Here
4.4-(Coming Soon)
What is "SafeStrap & Why do i have to use it?
Safestrap is our main method of flashing Rom's and could be found Here,
Always WIPE before flashing a new ROM or expect to receive errors. DON'T BE LAZY
Issues with safestrap
-Sometimes the storage is messed up and shows that you are using all your memory, when you really are not.If you use a different app to check, then you should see your real memory usage.
Where are all the kernels located?
Like i stated earlier, We don't have kernels yet, because of our locked bootloader
Where are all the Roms compatible with my phone?
All compatible and ready to install rom's could be found Here
There is currently NO AOSP,CM Based Rom's, So don't ask
What is KNOX and how does it effect me?
KNOX is basically made to **** us. But Samsung calls it security.
KNOX is removed from most custom Rom's. Knox does prevent root apps from working properly and should be removed asap.
How do I transfer My bookmarks from ROM to ROM?
Follow the guide i created Here
Im still working on a list of roms,and cool mods that are compatible with our phone. they will be located in the second post.Mods please sticky this thread
For me, to post mods and roms compatible with our phone
one more
Great information.
Thank you very much.
I have tried your KitKat 4.4.2. Glad to see it is rooted!
Now, it is easy to switch between MJ5 4.3 and MLG 4.4.2 through SafeStrap and Odin.
Wow very nice! Hopefully this will prove helpful.
Sent from my SM-P600 using Tapatalk
I will send people here. Thanks man. Wish we could donate to you. I bet there is a bunch of people who would love to buy you some drinks or whatever your in to....Thanks again for being organized and detailed. You have your Sh** together and its great!!!
Awesome work. Me personally Im waiting for SS to be updated but definitely keeping an eye out.
Im curious on one thing. When you discuss Knox and to 'remove it', would freezing this via TB server the same purpose? Also since youve had a go with 4.4, does Samsungs iteration of 4.4 still have the GPS issues or did they fix it? Just curious
Thanks!
Guys where can I get the stock rom my N900A (Note 3 AT & T) now install version 4.4.2 filtered want to go back to stock!
Enviado desde mi SAMSUNG-SM-N900A mediante Tapatalk
Read the first post!!
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Thank you love your rom and glad to see you are so involved in the community
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
No problem buddy
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
hi, how do i manually fix push the GPS files?
So no root for sm900a. How can I load a custom rom without having to use a computer? Possible?
I really hate this thing as of right now wish I had my note 2 back
I found Ultimate rotation control but it fails to work properly
thanks, perfect thread for an android newbie :good:
Nix A Nerd 2 said:
So no root for sm900a. How can I load a custom rom without having to use a computer? Possible?
I really hate this thing as of right now wish I had my note 2 back
I found Ultimate rotation control but it fails to work properly
Click to expand...
Click to collapse
If you are referring to the N900A, thew is root! Just gotta search.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Thank you. Now my almost $800 Samsung Galaxy note 3 has basic gps working properly. Samsung needs to hire guys like you
only thing missing is how to back up and restore...
so if you want a new rom...youre good to go..
Wanting to down grade back to JB rom from KITKAT v2
I Used to be on JB rom 4.3 And I really liked it. But I wanted to upgrade to to KitKat v2 because alot of people said they liked it. After I upgraded to KITKAT 4.4.2 I really did not enjoy it as much JB 2.6. I used to get 35000 score from Antutu Benchmark but now on V2 I get about 30000 score. And I thought the JB 2.6 was setup nicer. I dunno, but what I do know is that I would like to go back to JB 2.6 because I think it was a nicer piece of work. Anyone know where I can find the tutorial to downgrade back to JB 2.6? I thought I seen it before but I cant seem to find it. Thank you for your time.
htsl
I have now soft bricked my phone I am lost and need help! no one last night would help me! PLEASE help me now!!! I am stuck on step 4 of http://forum.xda-developers.com/show....php?t=2559715
when I select "show all devices" it only list 2 "Samsung mobile usb cdc composite device" and " samsung mobile usb modem" what am I doing wrong????
some one on another thread said I am using the wrong drivers... where Do I find the correct drivers?
Thanks
Rick
Are you in download mode?
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
I've hard bricked this thing once trying to flash a rom once. Tried to gain custom recovery via AUTOREC. Should be called Autowreck.
Sometimes it is best just to ask to be pointed in the right direction.
I just learned about LOKI and SAFESTRAP. BUT are these just for TW based ROMS? I want a CM based ROM. PACROM, specifically. I see others with this AT&T phone running it.
Will someone please help a noob with a tutorial or advice and stop me from running in circles? W/ rooted 4.4.2, NC1 build.
Start with reading well the SafeStrap thread by Hashcode in Q&A
and the All Thinks ATT, MK2 in General
You can only use SafeStrap and can not flash non TW roms or custom recoveries/kernels, so CM AOSP etc
Sorry
rugmankc said:
Start with reading well the SafeStrap thread by Hashcode in Q&A
and the All Thinks ATT, MK2 in General
You can only use SafeStrap and can not flash non TW roms or custom recoveries/kernels, so CM AOSP etc
Sorry
Click to expand...
Click to collapse
Been reading the safe strap thread. 89 pages! Stumped on the first one. ENCRYPTED? Not sure. How do I tell? Nb1, Mk2, Mf3 software? No idea. Did not see it in settings> about device. How do I tell is the next step I guess.
On to check the All Thinks Mk2 thread. Sorry for my noobness.
New Song said:
Been reading the safe strap thread. 89 pages! Stumped on the first one. ENCRYPTED? Not sure. How do I tell? Nb1, Mk2, Mf3 software? No idea. Did not see it in settings> about device. How do I tell is the next step I guess.
On to check the All Thinks Mk2 thread. Sorry for my noobness.
Click to expand...
Click to collapse
Get a terminal emulator on your phone. In it type:
su
getprop ro.bootloader
What does it say? Look at the last three characters
Edit, in about devices what is your baseband, last three characters?
Sent from my Nexus 5 using XDA Free mobile app
Sorry, I thought you NC1 now?
jd will get you sorted, he is more hands on with safestrap than i am
but, the gist of it is going to All Thinks ATT, MK2 and to post 5
but read all you can in both threads--:good:
Nc1. So this is the SafeStrap file: JFLTE-3.72-kk-B01.apk. How a bow the encryption determination? Sound like a bootloader if it is encrypted.
New Song said:
Nc1. So this is the SafeStrap file: JFLTE-3.72-kk-B01.apk. How a bow the encryption determination? Sound like a bootloader if it is encrypted.
Click to expand...
Click to collapse
Did you get nb1 from your baseband? Is your device encrypted? That's different than than the bootloader. Your bootloader is definitely locked. But you can root by updating to nc1 and using towelroot and then safestrap.
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Did you get nb1 from your baseband? Is your device encrypted? That's different than than the bootloader. Your bootloader is definitely locked. But you can root by updating to nc1 and using towelroot and then safestrap.
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
NC 1
I am rooted. SS installed. ROM DL'ed ready to go. Creating ROM slot. Or trying t seems stuck. I know it takes about 5 minutes. But it's been about 15-20
sorry for the pic quality. No zoom on this tab 4. It's next.
New Song said:
NC 1
I am rooted. SS installed. ROM DL'ed ready to go. Creating ROM slot. Or trying t seems stuck. I know it takes about 5 minutes. But it's been about 15-20
sorry for the pic quality. No zoom on this tab 4. It's next.
Click to expand...
Click to collapse
You have to use the stock slot, not a secondary slot
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You have to use the stock slot, not a secondary slot
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Aaaaand. S'S stopped working. Uninstalled, reinstalled and the same. Technology fails me.
New Song said:
Aaaaand. S'S stopped working. Uninstalled, reinstalled and the same. Technology fails me.
Click to expand...
Click to collapse
What are you trying to flash? PAC isn't going to work, it's cm based. You can only flash touch wiz based roms
Sent from my Nexus 5 using XDA Free mobile app
Anything else. I have Gravitron zip ready to go. But I cannot even get S'S to open now. "SafeStrap has stopped working". Even after attempted reinstalls. If there was someone here local I could just delegate this to, I would.
New Song said:
Anything else. I have Gravitron zip ready to go. But I cannot even get S'S to open now. "SafeStrap has stopped working". Even after attempted reinstalls. If there was someone here local I could just delegate this to, I would.
Click to expand...
Click to collapse
You probably have to use Odin to re-flash nb1 and start over
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You probably have to use Odin to re-flash nb1 and start over
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
That may be. Got safestrap to start working by using se linu mode changer. Still stuck at updating partition details. Gonna start a thread on that I think. Maybe one on the search functions too.
New Song said:
That may be. Got safestrap to start working by using se linu mode changer. Still stuck at updating partition details. Gonna start a thread on that I think. Maybe one on the search functions too.
Click to expand...
Click to collapse
Just as an FYI, I've had very good results with Golden Eye installed via SafeStrap. No problems with it, whatsoever, in my experience. That being said, I'm tired of being restricted to touchwiz ROMs so I've bought a T-Mobile S4 (unlocked SIM/Bootloader) and will be selling my ATT one soon.
Marc
Frankenscript said:
Just as an FYI, I've had very good results with Golden Eye installed via SafeStrap. No problems with it, whatsoever, in my experience. That being said, I'm tired of being restricted to touchwiz ROMs so I've bought a T-Mobile S4 (unlocked SIM/Bootloader) and will be selling my ATT one soon.
Marc
Click to expand...
Click to collapse
Starting to feel the same way. Flashing this sgh-i337 is turning out to be quite an infuriating ordeal. So much conflicting info. Allllll these ROMs available for S4, it seems. But they don't work because this version isn't compatible. And the Tw ones I've tried ALL DAY are not working either. Granted, I was not using SS correctly initially, but now that they are successfully loading in the stock slot are not working. Graviton never boots, stays on the ouroboros snake screen. Imperium has no data or wifi etc (i9505 rom? I tried it as it said it was verified working 9th i337. Nope. Figured it was a problem when it said i9505 on my model). Goldeneye, actually can connect, wifi etc. But when I change settings in Wanam, it does not take them (after reboot). Had all the other connectivity issues until I flashed a patch. Also, I was pretty happy to see than I could activate hotspot. But my device was nowhere to be found by other devices. Modules, kernals, patches, oh my... out of all the tutorials for S4's on the wide wide world of internets, nothing seems to fly. This must be the red headed bastard child of Android.
I know it is all user error, but can nothing be simple?
Just want a simple rom and hotspot. That looks awesome. Hrm.
About to try this GE download. GE-XXUGNG4-37.zip. I tried the later NG-8-38 version last time. And yes, I did the ST update at&t module update previously.
Great googley moogley! I think he's finally got it, folks! Ooooh. Niiice. So smooth. Roomy!
This hacking biz ain't for the faint of heart. Thanks guys!!! MUCH APPRECIAT3D! :good:
Paraphrasing, I think, Tom Hanks
"It's suppose to hard, the hard is what makes it great. If it wasn't hard, everyone would do it."
:good:
rugmankc said:
Paraphrasing, I think, Tom Hanks
"It's suppose to hard, the hard is what makes it great. If it wasn't hard, everyone would do it."
:good:
Click to expand...
Click to collapse
Avoid the clap.... Jimmy Dugan.
Hey that's good advice kid....