[Q] Cloudy Pro II - LS980, no data/network settings - G2 Q&A, Help & Troubleshooting

I have installed this ROM and I absolutely love it. I have one problem with it, though. I have no data at all. I tried looking for the LTEConfig.apk to delete this and it's not present in /system as it is suggested. I also cannot change my APN settings because I am unable to click on network settings, as a matter of fact I cannot even turn it on. There is even no option to update the PRL/Profile like most roms. I'm using the LS890 - Sprint Variant. I flashed the LS890-BS-Cloudy.zip and it didn't help as I have no other issues other than the missing network settings. Anyone else having this issue? If so, any fix to this?

Leonarthius said:
I have installed this ROM and I absolutely love it. I have one problem with it, though. I have no data at all. I tried looking for the LTEConfig.apk to delete this and it's not present in /system as it is suggested. I also cannot change my APN settings because I am unable to click on network settings, as a matter of fact I cannot even turn it on. There is even no option to update the PRL/Profile like most roms. I'm using the LS890 - Sprint Variant. I flashed the LS890-BS-Cloudy.zip and it didn't help as I have no other issues other than the missing network settings. Anyone else having this issue? If so, any fix to this?
Click to expand...
Click to collapse
Try to flash LS980 Modem(Via TWRP or other recovery tool):
http://www.androidfilehost.com/?w=files&flid=12880

I've tried that, and this...
Swakiny said:
Try to flash LS980 Modem(Via TWRP or other recovery tool):
http://www.androidfilehost.com/?w=files&flid=12880
Click to expand...
Click to collapse
Thanks for the quick reply. I forgot to mention that I've tried flashing that as well and it's no go. My network settings option is completely grayed out and I can't do anything.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@Cloudyfa , is there any fix for this?
I installed the baseband before the rom, then the rom, went through my setup, installed everything, rebooted, nothing, installed the bootstack as per this post, http://forum.xda-developers.com/showpost.php?p=51974589&postcount=281&nocache=1 and nothing.

Leonarthius said:
Thanks for the quick reply. I forgot to mention that I've tried flashing that as well and it's no go. My network settings option is completely grayed out and I can't do anything.
@Cloudyfa , is there any fix for this?
I installed the baseband before the rom, then the rom, went through my setup, installed everything, rebooted, nothing, installed the bootstack as per this post, http://forum.xda-developers.com/showpost.php?p=51974589&postcount=281&nocache=1 and nothing.
Click to expand...
Click to collapse
Stupid ask, but... have you tried to wipe cache,davilk etc?

Swakiny said:
Stupid ask, but... have you tried to wipe cache,davilk etc?
Click to expand...
Click to collapse
Yes, yes I have. I idiotically flashed the radio from the ZVC update which gave me a boot certificate error and ended up flashing zv8 from the tot so I'm starting all over again. This time around I'm upgrading from ZV9 to Cloudy Pro II. Let's see how that goes. I'll be done in a few minutes. I'll post back afterwards.

Leonarthius said:
Yes, yes I have. I idiotically flashed the radio from the ZVC update which gave me a boot certificate error and ended up flashing zv8 from the tot so I'm starting all over again. This time around I'm upgrading from ZV9 to Cloudy Pro II. Let's see how that goes. I'll be done in a few minutes. I'll post back afterwards.
Click to expand...
Click to collapse
Try pull down the notification bar and long-press "Data"

Theres a fix for that already.
1.)Make sure you have root
2.)Download APN Backup from play store and system/app mover
3.)use system/app mover to make APN Backup a system app
4.) Open APN Backup and press the menu button and click disable ICS
5.) Backup your apns
6.)flash ROM of choice
7.) Repeat steps 1 through 4
8.) Restore apn
Sent from my LG-LS980 using Tapatalk

LilDemon124 said:
Theres a fix for that already.
1.)Make sure you have root
2.)Download APN Backup from play store and system/app mover
3.)use system/app mover to make APN Backup a system app
4.) Open APN Backup and press the menu button and click disable ICS
5.) Backup your apns
6.)flash ROM of choice
7.) Repeat steps 1 through 4
8.) Restore apn
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
So just to be clear, I'll do this on my stock KITKAT rom, back up, flash cloudy pro 2, restore, and profit???
I'll give it a try right now!!!
@Cloudyfa this is something that should be on your faqs thread. I'll confirm if it works for me in a few seconds!

Yup. It works. Thank you so much! I wish I didn't have to go through all of this to make it work, as it would be great to just have a PRL/Profile update button back on the settings, but this is a nice workaround.

@Cloudyfa @LilDemon124, did you ever get a problem where you try to send a text message and it says NO USIM? I've tried removing and reinserting the SIM and it still doesn't work.

Related

Tried to update and lost mobile network

I tried to update my 9020a to the 4.0.4, was somewhat successful except not cellular connection. I have blank bars for signal with an x in it.
My IEMI shows correct in the EFS folder
I tried flashing my radio many times, I have UCKF1. I tried the original one, it failed but was able to flash the new version. But, I still have the same problem and it shows my baseband ver as i9020xxki1
I then went back to the pixel rom I had on before, same thing, no mobile network.
Then i brought my phone back to GB, I had a rooted nandroid. Same issue
what the hell happened and how do I get it back.
im actually really glad i have the patience to wait for the official release of ICS and don't jump on every leak and spend hours trying to fix what could of been avoided.
THIS LEAK ISN'T FOR THE I9020A!
I know it was not for the 9020a, but there is others that were successful. I got it to run, and it worked great, except the radio issue.
Now Im all the way back on GB, and still cant get it to work.
I am tired of waiting. This is not my first android and I bought this phone for the updates. Well, its just like every other att devices, updates just dont come this way.
so, how do i get signal back
blackhemi4x4 said:
I know it was not for the 9020a, but there is others that were successful. I got it to run, and it worked great, except the radio issue.
Now Im all the way back on GB, and still cant get it to work.
I am tired of waiting. This is not my first android and I bought this phone for the updates. Well, its just like every other att devices, updates just dont come this way.
so, how do i get signal back
Click to expand...
Click to collapse
what is your radio version??flash your old radio maybe will fix it..
Flash working radio for i9020a.
UCKF1 is the radio, ive tried both versions.
screenshot
here is the screenshot of the status area. Not pictured is my IEMI, but it is correct. Its acting like the radio is off. Ive even toggled the radio off and on.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you've made a backup of your EFS folder, repush it to your phone. That fixed my problems regarding radio a few times already.
1. Go to Dialer. Dial *#*#4636#*#*
2. Go to Phone information. Choose the preferred network to
"GSM Auto PRL" or "CDMA Auto PRL" or whatever you have.
3. Scroll down, deactivate and activate Phone Radio.
4. Press Menu button.
5. Select Phone frequency, then choose your country.
6. In the previous menu push the Home button to go back to Homescreen.
7. Reboot.
(By Brainmaster)
try this...
fixed had to replace efs folder and use a totally new radio.
stock 4.0.4 is way awesome
Thanks y'all
what radio did you end up using? I'm having the same problem on 4.0.4...
varandian said:
what radio did you end up using? I'm having the same problem on 4.0.4...
Click to expand...
Click to collapse
UCKE1 fixed it for me.
I put KD1 on for my 9020a on AT&T (I get better data speeds with an older radio for some strange reason) and DELETED /efs, rebooted, and it started working. To anyone else reading this, backup /efs before trying ANY of this.
varandian said:
I put KD1 on for my 9020a on AT&T (I get better data speeds with an older radio for some strange reason) and DELETED /efs, rebooted, and it started working. To anyone else reading this, backup /efs before trying ANY of this.
Click to expand...
Click to collapse
Did you replace your EFS folder or just delete it?
If you replaced it, what command did you use to replace it?
---------- Post added at 08:45 PM ---------- Previous post was at 08:11 PM ----------
I'm completely at a loss.
I tried deleting the contents of my EFS folder, replacing it with the backup files, rebooting and still no luck.
Still no signal.
Any advice?
iboj007 said:
Did you replace your EFS folder or just delete it?
If you replaced it, what command did you use to replace it?
---------- Post added at 08:45 PM ---------- Previous post was at 08:11 PM ----------
I'm completely at a loss.
I tried deleting the contents of my EFS folder, replacing it with the backup files, rebooting and still no luck.
Still no signal.
Any advice?
Click to expand...
Click to collapse
i replaced my whole efs folder with the one I had backed up.
What radio do you have installed now??
blackhemi4x4 said:
i replaced my whole efs folder with the one I had backed up.
What radio do you have installed now??
Click to expand...
Click to collapse
I have XXKB3 right now... can't seem to get UCKE1
iboj007 said:
I have XXKB3 right now... can't seem to get UCKE1
Click to expand...
Click to collapse
does KE1 not flash for you or not able to get it to download
blackhemi4x4 said:
does KE1 not flash for you or not able to get it to download
Click to expand...
Click to collapse
HA! flashed it via CWM and now its back!!!!! Anyone who has this issue, try flashing UCKE1 via CWM!
Sweet, that was the only one that worked for me. Now go and enjoy 4.0.4
Im still on my first charge from this morning. I love it!
Instable network connection on I9020XXKF1
Since I updated to 4.0.3 I've been having random network connection issues: Sometimes when waking the phone from sleep while connected to wifi the signal bar is empty only fix is to reboot the phone. I've updated to 4.0.4 on Wednesday and still have this issue. I was wondering if any of you have a suggestion for a better radio for the GSM/UMTS version of the i9020. I9020XXKF1 is supposed to be the most stable radio, unfortunately it isn't for me. Anyone else experiencing similar issues?

[Q] Recovery data?

Ok so im running twrp 2.6 on beanstalk 4.3 and i went to make a back up and its showing me that wanting to back up system,data, and boot but whats got me is the data is 6266646mb what is that all about?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
danebryan18 said:
Ok so im running twrp 2.6 on beanstalk 4.3 and i went to make a back up and its showing me that wanting to back up system,data, and boot but whats got me is the data is 6266646mb what is that all about?View attachment 2207641
Click to expand...
Click to collapse
i think that is all of your system data information (downloaded apps, passwords, pics, settings, etc). doing a factory reset/data wipe clear all of that.
jco23 said:
i think that is all of your system data information (downloaded apps, passwords, pics, settings, etc). doing a factory reset/data wipe clear all of that.
Click to expand...
Click to collapse
Ive tried everything full wipe,change recovery,flash differnt roms, even did a full format of internal memory and nothing chages I cant make any back ups now. Ive been up all night trying to fix it
danebryan18 said:
Ive tried everything full wipe,change recovery,flash differnt roms, even did a full format of internal memory and nothing chages I cant make any back ups now. Ive been up all night trying to fix it
Click to expand...
Click to collapse
i think I recall seeing some folks claim that they were having similar troubles with backing up 4.3 ROMs.
jco23 said:
i think I recall seeing some folks claim that they were having similar troubles with backing up 4.3 ROMs.
Click to expand...
Click to collapse
Well Im going to flash a 4.2 rom try that and see what happens. thanks for your imput
Well that didnt work.
danebryan18 said:
Well that didnt work.
Click to expand...
Click to collapse
hmmm... I was able to make several successful backups of 4.2.2 ROMs.
did you completely uninstall 4.3 and start from fresh? again, I read that some folks had trouble even getting back to stock or 4.2.2 from 4.3.
while I don't think there is an issue with TWRP, I would certainly post your question on that thread.
jco23 said:
hmmm... I was able to make several successful backups of 4.2.2 ROMs.
did you completely uninstall 4.3 and start from fresh? again, I read that some folks had trouble even getting back to stock or 4.2.2 from 4.3.
while I don't think there is an issue with TWRP, I would certainly post your question on that thread.
Click to expand...
Click to collapse
I just used matts tool and flashed back to stock and it fixed it all!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
danebryan18 said:
I just used matts tool and flashed back to stock and it fixed it all!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
great.
I would advise to create some nandroids of your fav 4.1.2 and 4.2.2 ROMs.
Ive flashed just about every rom for my M as it is just a play phone(no service lol) even unlocked it for other carriers and ive never had a problem like this. Well now that its fixed time to flash somemore 4.3's

Help! Securtiy error in G3 ported roms

I am using F320L. I have tested Lamhoang G3 1.5, OptimusG3 V1.2 and CloudyG3 1.2 roms on my G2. These are very beautiful:laugh:. But I have same problem with all G3 ported roms is that on hard rest, it hangs on boot logo (security error is written just below logo).:crying:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I do not know what to do! Please some one help me!
Thanks!
QSR1 said:
I am using F320L. I have tested Lamhoang G3 1.5, OptimusG3 V1.2 and CloudyG3 1.2 roms on my G2. These are very beautiful:laugh:. But I have same problem with all G3 ported roms is that on hard rest, it hangs on boot logo (security error is written just below logo).:crying:
I do not know what to do! Please some one help me!
Thanks!
Click to expand...
Click to collapse
I'm having the same problem. in fact i just joined today to find a solution.
New findings!
extreme1018 said:
I'm having the same problem. in fact i just joined today to find a solution.
Click to expand...
Click to collapse
Now i have found that device not only stops at logo (security error) on hard reset but on restore personal data from original rom backup and on sim remove/ insert or trying to change any file of system!:crying:
I followed the following flashing procedure, just done full wipe, then flashed the rom and flashed update supersu 2.01. that is all!
QSR1 said:
Now i have found that device not only stops at logo (security error) on hard reset but on restore personal data from original rom backup and on sim remove/ insert or trying to change any file of system!:crying:
I followed the following flashing procedure, just done full wipe, then flashed the rom and flashed update supersu 2.01. that is all!
Click to expand...
Click to collapse
I did basically the same thing and I have it working now. However the knock on is still a pain in the a$$ and there is still the dead spot in the upper part of the screen. It was not there before kit Kat.
Please also help me !
extreme1018 said:
I did basically the same thing and I have it working now. However the knock on is still a pain in the a$$ and there is still the dead spot in the upper part of the screen. It was not there before kit Kat.
Click to expand...
Click to collapse
Please help me how you did that! i am really in problem!:crying:
Same problem for me after flashing lamhoang 1.5 (back from Lamhoang Final ART).
However, I factory rest it (using hard button) and enter recovery, reflash lamhoang final again.
It works!
Can u get the phone back into recovery mode? With the phone off, press and,hold the power and volume down button. When the LG logo appears let off the power button and quickly press and hold again. The screen should turn white and will ask if you want to do a factory reset. Choose yes and you should go into recovery mode. Hopefully you can get that far. Then you can reinstall from your backup(if u made one) if not. Be sire you do a wipe. Also if you unzipped the file into multiple folder you can have problems too. If so flash the backup and delete everything except the zip file. Once you are in recovery wipe the data. Be sure to include dalvic cache and cache. Then flash the cloudy Rom,zip file and all should be good. Pm me if you have any questions about it.
QSR1 said:
Please help me how you did that! i am really in problem!:crying:
Click to expand...
Click to collapse
Thanks!
extreme1018 said:
Can u get the phone back into recovery mode? With the phone off, press and,hold the power and volume down button. When the LG logo appears let off the power button and quickly press and hold again. The screen should turn white and will ask if you want to do a factory reset. Choose yes and you should go into recovery mode. Hopefully you can get that far. Then you can reinstall from your backup(if u made one) if not. Be sire you do a wipe. Also if you unzipped the file into multiple folder you can have problems too. If so flash the backup and delete everything except the zip file. Once you are in recovery wipe the data. Be sure to include dalvic cache and cache. Then flash the cloudy Rom,zip file and all should be good. Pm me if you have any questions about it.
Click to expand...
Click to collapse
Thanks for suggestion!
But i always go into recovery, do a full wipe (dalvic cache, cache, system and data)!
But the problem of security error is always there!
Flash a proper kernel for it to run.
Ask in his thread, that's the best.
You need to flash Kk_baseband for your device
There is link in clody g3 rom thread

Can't Update PRL/ Profile

Hello,
Back in August of 2015 I bought a FreedomPop Samsung Galaxy S4 which I used with FreedomPop up until just recently when I signed up with RingPlus, ported my old FreedomPop number to my R+ account and then deactivated my FreedomPop account. OK, so.. my problem is is that now I can't use R+ because it requires me to update my PRL, but I can't. I get this error: "The PRL update could not be completed. Please try again later. If the problem persists, you may need to contact Customer Service. Error: Connection Error (6)"
Now, in the past when I was trying to root my phone I really screwed things up and ended up having to install new Firmware. You can find more information about that here: http://forum.xda-developers.com/galaxy-s4-sprint/help/caught-boot-loop-rooting-t3304144
Any help would be greatly appreciated, especially since my phone is practically useless at the moment.
-Chuck
Try dialing ###72786#
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bilgerryan said:
Try dialing ###72786#
Click to expand...
Click to collapse
When I tried that, the number disappeared when I added the last #. And it still won't let me update the PRL.
I think I know why that didn't work. I'm suppose to dial ##72786#, not ###72786#. I'm assuming you meant for me to reprovision my phone?
Anyway, I did that and seemed to be working fine, but then when I tried to update the PRL it, took me to hands free activation. Same when I tried to update my profile as well. How do I go about avoiding this?
I could really use some help here please.
Chuck38 said:
I could really use some help here please.
Click to expand...
Click to collapse
With what? If it updated profile and PRL them you are done. You only have to do this about once a month, not every day.
Alright. I should probably contact Ringplus directly about my other problem here.
Sorry for bothering you and thanks for the help.
Chuck38 said:
Alright. I should probably contact Ringplus directly about my other problem here.
Sorry for bothering you and thanks for the help.
Click to expand...
Click to collapse
Sorry, I missed that. I recommend Odining TWRP and then flashing the SuperSU zip in recovery for rooting.
bilgerryan said:
Sorry, I missed that. I recommend Odining TWRP and then flashing the SuperSU zip in recovery for rooting.
Click to expand...
Click to collapse
How would I go about Odining TWRP?
I've only used Odin to re-install my Firmware.
Chuck38 said:
How would I go about Odining TWRP?
I've only used Odin to re-install my Firmware.
Click to expand...
Click to collapse
Download TWRP and run it in the PDA slot.. Make sure to uncheck Auto Reboot.
bilgerryan said:
Download TWRP and run it in the PDA slot.. Make sure to uncheck Auto Reboot.
Click to expand...
Click to collapse
Alright. TWRP has been installed, as well as SuperUS. Just checked with Root Checker and my phone has been properly rooted.
However.. the problem still persists. I still am unable to get RingPlus to work with my phone. Perhaps because I can't update the PRL, it keeps taking me to hands free activation, or perhaps there's something else going on. I will see if I can contact RingPlus and see if they know what's wrong.
Thank-you for your assistance, I will report back if I get this figured out.

[SOLVED, APN] No mobile network connection on LG V20 H990DS

I SOLVED IT JUST BY CONFIGURING AN APN. IT WAS TRIVIAL ALL ALONG, I'M A ****ING DUMBASS
Hi ya'll,
Yesterday I got me a V20 H990DS and proceeded to unlock it with dirtysanta.
I soon noticed I can't connect to the mobile network at all (network status is disconnected, always). Everything else works ok, SMS, Wifi, calls.
I flashed back to stock using a kdz and the problem remains the same. I have a couple of ideas as for what to do next:
Flash the modem: I remember having the same problem with my LG G4, all I had to do was to flash the appropriate modem. I don't know how to flash modems or where to get them though.
Flash the correct kdz: the packaging and an IMEI checker both state the phone is AUS and I might have flashed a wrong version of it. Another IMEI checker claims it belongs to the ABC region (?). Frankly, I don't think it even matters.
Use the secret menu to fix some network configurations: I know absolutely nothing about it so you'd have to guide me.
The bottom line is, I need help, please.
Flash this using LGUP and use only Partition Download option.
https://lg-firmwares.com/downloads-file/4345/H990ds10b_00_OPEN_ESA_DS_OP_1102.kdz
You will get Blue screen saying phone reset status 2.
Then go to download mode again and flash Indian version v10j available on the same website.
Use same Partition Download option this time also.
Once successfully flashed... Phone gets its signals.
Try this and update
Cheers
https://lg-firmwares.com/downloads-file/4345/H990ds10b_00_OPEN_ESA_DS_OP_1102.kdz
https://lg-firmwares.com/downloads-file/10637/H990ds10j_00_OPEN_ESA_DS_OP_0923.kdz
DroneJC said:
Flash this using LGUP and use only Partition Download option.
You will get Blue screen saying phone reset status 2.
Then go to download mode again and flash Indian version v10j available on the same website.
Use same Partition Download option this time also.
Once successfully flashed... Phone gets its signals.
Try this and update
Cheers
Click to expand...
Click to collapse
Hi, Thanks for the reply.
I'm using LGUP 1.14 with uppercut and I can't find any "only Partition Download option", The options I have available are: Refurbish, Upgrade, Phonesetting and FOTA Upgrade.
Which of these options should I use? Should I get a different version or LGUP?
I'd like to be 100% sure before I flash my phone again.
Thanks again.
revolverg said:
Hi, Thanks for the reply.
I'm using LGUP 1.14 with uppercut and I can't find any "only Partition Download option", The options I have available are: Refurbish, Upgrade, Phonesetting and FOTA Upgrade.
Which of these options should I use? Should I get a different version or LGUP?
I'd like to be 100% sure before I flash my phone again.
Thanks again.
Click to expand...
Click to collapse
Try installing this...LGUP.zip file contents and try again. Uninstall your old version before proceeding. If your phone is detected in download mode as H990DS, then you should be able to see the options.
If your phone is not detected, then unzip V20 dll and paste in root folder of LGUP in the C/programfiles path.
Cheers
DroneJC said:
Try installing this...LGUP.zip file contents and try again. Uninstall your old version before proceeding. If your phone is detected in download mode as H990DS, then you should be able to see the options.
If your phone is not detected, then unzip V20 dll and paste in root folder of LGUP in the C/programfiles path.
Cheers
Click to expand...
Click to collapse
Hi, Thanks for the reply again.
I get this dialog and I don't know which partitions to choose:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry for questioning every step of the process, Flashing partitions is a serious business and I don't want to brick my phone, it's brand new.
Thanks in advance
revolverg said:
Hi, Thanks for the reply again.
I get this dialog and I don't know which partitions to choose:
Sorry for questioning every step of the process, Flashing partitions is a serious business and I don't want to brick my phone, it's brand new.
Thanks in advance
Click to expand...
Click to collapse
Important... download only indian version as given in link for H990DS and when you get dialog, select all and press start...in 3 min your phone will reboot and thats it, your phone is back to life
I flashed to the first kdz and then the second one, just like you told me, There's 0 difference. No mobile network, the rest is unchanged.
I think it might have something to do with regional settings of frequencies and bands, I'm in Israel so maybe I need to change some settings on the secret menu.
I'll ask around and update you if I find a working solution.
Great news you guys!
Apparently all I needed to do was to configure an APN with my provider's details, that's it.
I'm ecstatic!

Categories

Resources