Related
Hey guys!
I need yoyr help. My phone was dead since march 11. I don't remember what I'm done with it, but the following symptoms are:
- when I turn on the phone nothing exept Galaxy S GT-I9000 Samsung screen is showed.
- when I turn phone to download mode and connect it with my computer, nothing happens,no notifications, device manager nothing shows, I once showed: one of your devices has malfunction.
What should I do? USB plug is broken? My other phone have no problem with this MicroUSB cable from samsung and it's connecting to computer without any problems.
Edit:
I plug cable with turning on download mode. Now computer shows: one of your device has malfunction. DM error loop?
UP Please! Same problem!
Just can access download mode, but my PC doesn't recognise it.
It got stuck in the first logo and I can't access Recovery.
Mathsiel said:
UP Please! Same problem!
Just can access download mode, but my PC doesn't recognise it.
It got stuck in the first logo and I can't access Recovery.
Click to expand...
Click to collapse
You use odin right?
And correct drivers installed?
Sent from my GT-I9000 using Tapatalk 2
misiek1791 said:
Now computer shows: one of your device has malfunction. DM error loop?
Click to expand...
Click to collapse
use solution in
2) Problem:- Cannot connect to PC or Unknown Device, getting Code 43 or any other code or NO response when using USB cable in My Android Solutions
Mathsiel said:
Just can access download mode, but my PC doesn't recognise it.
It got stuck in the first logo and I can't access Recovery.
Click to expand...
Click to collapse
use solution in
1) Problem:- Cannot enter Download or Recovery Mode and
2) Problem:- Cannot connect to PC or Unknown Device, getting Code 43 or any other code or NO response when using USB cable in My Android Solutions
xsenman said:
use solution in
2) Problem:- Cannot connect to PC or Unknown Device, getting Code 43 or any other code or NO response when using USB cable in My Android Solutions
use solution in
1) Problem:- Cannot enter Download or Recovery Mode and
2) Problem:- Cannot connect to PC or Unknown Device, getting Code 43 or any other code or NO response when using USB cable in My Android Solutions
Click to expand...
Click to collapse
yep, I was checked this thing. And this is not helpful. Yes, have few good ideas but for my case... nothing I can use... Main reason: My computer don't show me any alerts or messages after plug in mUSB to phone...
I solved my problem. What I did was to use another PC, then just installed the Samsung drivers, plugged the phone in download mode and the the driver installed OK.
Odin recognised the phone too so I could flash a kernel.
I can't realize why my PC didn't recognize the phone. I tried reinstalling drivers, the android SDK but nothing worked.
Thanks for the answers.
misiek1791 said:
My computer don't show me any alerts or messages after plug in mUSB to phone...
Click to expand...
Click to collapse
And IF nothing worked and USB connection still fails no matter what, than it would be best to look into this
So I already tried reading most of the threads about this problem but sadly I wasn't able to find the answer to my problem. I just recently reformatted my computer and thought that I want to return to stock ROM for now. But when I entered download mode and plugged the cable in, Odin cannot detect the phone.
I got frustrated after trying so I restarted my phone without disconnecting the cable. When the phone booted up normally, Odin was able to detect the phone, so I tried download mode again, nothing, now I tried recovery mode, detected.
I already tried:
- Installing Kies
- Installing just the drivers
- Trying debug on/off
Also, I've been having problems with "Samsung Mobile USB Modem" "An error occurred during the installation of the device. The required section was not found in the INF." Could this be the cause of the first problem?
Yes I just made this account to ask you guys this.
try new version odin search at caliban666 thread,if im not wrong he post a new version of odin.try installing a new samsung driver at dokys thread.i hope this will help u...
Try installing the drivers again..
If possible download them again..
**rooting is new for me...and i am noob to root...**
So only the download mode that isn't detected by odin? I have the same problem before. Here, when you go into download mode but odin doesn't detect your phone, press the power button until your phone turns black and don't let it to reboot. If your phone already turns black then go into download mode again (volume down+power+home). Odin should detect it.
For your 2nd problem, here you can download the samsung usb driver pack, I also experienced that after installing kies then "an error occured blabla". Driver here: http://forum.xda-developers.com/showthread.php?p=11498043
Sent from my GT-S5360 using xda premium
No luck.
I just tried the new Odin and installed the new Samsung drivers.
It's still the same for both problems.
- can't detect phone in download mode but it can detect the phone in normal and recovery mode.
- samsung mobile USB modem error still persists
Your os must be corrupted!!! I
Sent from my GT-S5360 using xda premium
Try this...
Install drivers again...
*Dont connect ur usb now*
Now go to download.mode...
*now connect ur pc with ur phone via usb...*
.
Wait for a min...
Now press up...
...
Maybe this help
**rooting is new for me...and i am noob to root...**
AMAZING...
menewtoroot said:
Try this...
Install drivers again...
*Dont connect ur usb now*
Now go to download.mode...
*now connect ur pc with ur phone via usb...*
.
Wait for a min...
Now press up...
...
Maybe this help
**rooting is new for me...and i am noob to root...**
Click to expand...
Click to collapse
thanks for your help...your the best....now odin can detect my s6102.....KEN from PHILIPPINES
nnehk02 said:
thanks for your help...your the best....now odin can detect my s6102.....KEN from PHILIPPINES
Click to expand...
Click to collapse
well.. u can rather press it ...
anyways.. dn't thnk me.. thnk to the creator of odin... android... savie for packages... nd others... (sry if i 4gt someones name)
Hi....my phone get detected by odin wen it is switched off nd connected to p.c but not in download mode. I soft bricked my device nd really need to use odin...can any1 help...it only stops gettng detected in download mode...shows 0003 added nd ol wen switched off
sarnz said:
Hi....my phone get detected by odin wen it is switched off nd connected to p.c but not in download mode. I soft bricked my device nd really need to use odin...can any1 help...it only stops gettng detected in download mode...shows 0003 added nd ol wen switched off
Click to expand...
Click to collapse
try this - maybe work . reinstall your usb samsung driver - restart you pc/laptop - put you phone to download mod (dont continue yet) - if you on pc put you usb cable at rear port not front - then connect you usb to phone - wait 30 second - and continue you phone to download mod . if still not show - put out you usb cable from phone - off and back to download mod without usb cable - wait then connect you usb cable . im got same problem as you before - and try use another usb cable .
Sent from my GT-S5360
put your phone in download mode and connect to computer
open odin
remove battery from the phone
odin will now see the phone connected
reinsert battery
Can a member who can use Odin with their GT-S5360 connect the 5360 in "Download Mode" to their PC, open Windows Device Manager and copy / paste the Device Instance ID shown under:
+Universal Serial Bus controllers
...Composite Device
by right-clicking it, choose Properties, then Details?
On my PC, it is shown as 'Unkown Device' with the following Device Instance ID:
USB\VID_0000&PID_0000\5&2E64F456&0&1
Which is most likely not what it should be.
I want to know what it should be.
I have two Galaxy Y's (one soft-bricked, the other working fine) and both show the same ID.
BTW, I have tried every port on the back of my PC with four Samsung data cables and three third-party cables and I cannot get Windows or Odin to recognize the GT-S5360 in download mode (both phones).
I have downloaded and installed / uninstalled / rebooted, etc. with the following versions of Samsung USB Driver for Mobile Phones:
1.3.1500
1.4.8
1.5.9
1.5.15
1.5.23
1.5.33
I have downloaded but cannot install version:
1.5.49
MCC InstallWizard says it "could not" install the drivers but no error message or log is given.
And for some reason, the "have disk" method of installing the drivers doesn't work either.
My PC is running XP SP3 x86, offline.
I download all files to my working phone, and transfer them to the PC.
One last thing, can someone who has USB driver version 1.5.49 installed, open Windows Services and check to see if the Samsung Connection service has started and is running?
Phone not detected on ODIN
When i connect my Grand 2 to my laptop... it is connected as MPT and showing as detected on PC... when i start ODIN. it doesnt give the yellow/blue light. The phone is also not detected on KIES (both versions). but i can copy files through windows explorer.
I have galaxy S2 and Note 3. they are both detected on odin. But Grand 2 is not.
I have installed usb drivers, reinstalled adb drivers on device manager, changed the cable. Nothing worked for grand 2.
Please help!!
Anser117 said:
When i connect my Grand 2 to my laptop... it is connected as MPT and showing as detected on PC... when i start ODIN. it doesnt give the yellow/blue light. The phone is also not detected on KIES (both versions). but i can copy files through windows explorer.
I have galaxy S2 and Note 3. they are both detected on odin. But Grand 2 is not.
I have installed usb drivers, reinstalled adb drivers on device manager, changed the cable. Nothing worked for grand 2.
Please help!!
Click to expand...
Click to collapse
m having same problem as you.
did you get any solution?
Simple solution.
kilogrip said:
Can a member who can use Odin with their GT-S5360 connect the 5360 in "Download Mode" to their PC, open Windows Device Manager and copy / paste the Device Instance ID shown under:
+Universal Serial Bus controllers
...Composite Device
by right-clicking it, choose Properties, then Details?
On my PC, it is shown as 'Unkown Device' with the following Device Instance ID:
USB\VID_0000&PID_0000\5&2E64F456&0&1
Which is most likely not what it should be.
I want to know what it should be.
I have two Galaxy Y's (one soft-bricked, the other working fine) and both show the same ID.
BTW, I have tried every port on the back of my PC with four Samsung data cables and three third-party cables and I cannot get Windows or Odin to recognize the GT-S5360 in download mode (both phones).
I have downloaded and installed / uninstalled / rebooted, etc. with the following versions of Samsung USB Driver for Mobile Phones:
1.3.1500
1.4.8
1.5.9
1.5.15
1.5.23
1.5.33
I have downloaded but cannot install version:
1.5.49
MCC InstallWizard says it "could not" install the drivers but no error message or log is given.
And for some reason, the "have disk" method of installing the drivers doesn't work either.
My PC is running XP SP3 x86, offline.
I download all files to my working phone, and transfer them to the PC.
One last thing, can someone who has USB driver version 1.5.49 installed, open Windows Services and check to see if the Samsung Connection service has started and is running?
Click to expand...
Click to collapse
Just reinstall your operating system of pc and install the drivers again. Everything will be fine.
Else try connecting it to another computer. It will WORK for 100^(1000000)%.
Hope it was helpful.
You should install full driver for SGY
I have tried to upgrade my galaxy y with cyanogen Android 4.4, when I tried to install using recovery mode my phone suddenly switched off.. And restarted. But struck in logo so I tried to reflash it but recovery mode was not showing it just struck at logo, & I even tried odin mode after several attempts it is opening download mode just once in a 20-30times, & cannot detect my phone in odin mode.. Do u guys have any suggestions??
I have tried to upgrade my galaxy y with cyanogen Android 4.4, when I tried to install using recovery mode my phone suddenly switched off.. And restarted. But struck in logo so I tried to reflash it but recovery mode was not showing it just struck at logo, & I even tried odin mode after several attempts it is opening download mode just once in a 20-30times, & cannot detect my phone in odin mode.. Do u guys have any suggestions??
yunos interface
my samsung grand 2 has "yun os interface" its not detecting by odin please help me
I tried a ROM, and i fail, i can't turn on my phone (s5360), i must back my phone to STOCK ROM with Odin, but USB Device Not Recognized, i installed driver, help me
follow the instructions on my thread
http://forum.xda-developers.com/showthread.php?t=2568853
if you have installed the driver correctly using rear usb ports if on a pc and set your phone to download mode correctly there is no reason why odin will not display com then a number in a coloured box under com:id which shows odin is connected and you have android adb device displayed in device manager
thanks your help but it not work
thanks your help but it not work, :crying: i tried kies, it also not work
gemnett said:
thanks your help but it not work, :crying: i tried kies, it also not work
Click to expand...
Click to collapse
you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed
if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work
unless you have a faulty usb port/cable it will be due to user error
gemnett said:
thanks your help but it not work, :crying: i tried kies, it also not work
Click to expand...
Click to collapse
Are you boot into download mode already? If not , odin will not recognize your phone anyway
install samsung usb driver first n then connect your phone with download mode by usb
Note:make sure that usb driver is install properly before connect ur phone
.
marcussmith2626 said:
you can not use kies to flash or restore firmware on galaxy y - it is not supported and kies is just not needed
if you have installed the usb drivers from the link in my thread (in compatibility mode if on windows 8/8.1) - are using a working usb cable rear usb ports on pc and correct split firmware from my thread it will work
unless you have a faulty usb port/cable it will be due to user error
Click to expand...
Click to collapse
i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up
!!
GalKill said:
Are you boot into download mode already? If not , odin will not recognize your phone anyway
Click to expand...
Click to collapse
of course
@@
before that, i installed ROM cm7.2 with Kernel [email protected]#2. but it fail and can't boot. recovery also no
gemnett said:
i did it.. install the usb drivers from the link in your thread(win 8.1), put cable in rear sub port.. but still no working.... i give up
Click to expand...
Click to collapse
did you run the usb driver setup in compatibility mode?
right click the setup file
click properties
click compatibility tab
tick box to run in compatibility
select windows xp (service pack 2 will do)
apply
then run the setup
im using windows 8.1 and no problems with me
marcussmith2626 said:
did you run the usb driver setup in compatibility mode?
right click the setup file
click properties
click compatibility tab
tick box to run in compatibility
select windows xp (service pack 2 will do)
apply
then run the setup
im using windows 8.1 and no problems with me
Click to expand...
Click to collapse
i did, pack 2..but still USB Device Not Recognized, maybe my phone die. hehe. but thank you....
Ah, this is my problem: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)" :cyclops:
gemnett said:
i did, pack 2..but still USB Device Not Recognized, maybe my phone die. hehe. but thank you....
Ah, this is my problem: "This device is disabled because the firmware of the device did not give it the required resources. (Code 29)" :cyclops:
Click to expand...
Click to collapse
right click the device
click uninstall
restart the pc
then put phone into download mode
connect usb
push vol up on phone to start connection
drivers should then install
Try to use your cable connected from your pc and your phone again. If the same problem happened, try to connect your phone using that cable to another pc. BUT if that phone is not recognized, I think the problem is in the cable. Try to buy another one, and if same thing happened, the problem is in the usb port of your phone.
DiwatangTboom said:
Try to use your cable connected from your pc and your phone again. If the same problem happened, try to connect your phone using that cable to another pc. BUT if that phone is not recognized, I think the problem is in the cable. Try to buy another one, and if same thing happened, the problem is in the usb port of your phone.
Click to expand...
Click to collapse
I think so.. the problem is in the usb port of my phone... so, what i have to do ? replace?
gemnett said:
I think so.. the problem is in the usb port of my phone... so, what i have to do ? replace?
Click to expand...
Click to collapse
Yep.
I tried to downgrade from Kitkat to JB via flashtool this morning which I often successfully flashed with the same method. But while the flashing is going on and almost finish the flashing (system.img, userdata.img, etc. are already flashed), there seems to be some problem and popped out that the flashing is fail. And then the device does not boot up. While I tried to reconnect the device to PC, the PC cannot recognize the device as shown in the picture. Unable to process any further method. Does anyone in this forum knows how to recover the bricked device like this?
The phone starts? In a black screen?
If the PC detects it like that the phone has some energy and connection...
Does anything apears on the screen? Can you go to the Recovery Mod?
Have you tried to force the driver installation on that USB item that appears on device manager?
Do you have access via ADB or fastboot?
Did you nottest in what partition did the error message appeared?
Please provide some answers to these questions so i can try to help you...
RSGI_PT said:
The phone starts? In a black screen?
If the PC detects it like that the phone has some energy and connection...
9Does anything apears on the screen? Can you go to the Recovery Mod?
Have you tried to force the driver installation on that USB item that appears on device manager?
Do you have access via ADB or fastboot?
Did you nottest in what partition did the error message appeared?
Please provide some answers to these questions so i can try to help you...
Click to expand...
Click to collapse
Nothing on the screen. Not able to boot into recovery or adb is not working. The phone is just death. But, when I insert the usb cable, the pc can detect it. I even approach the Customer Care here in Aizawl, but they cannot fixed. Even when I followed the instruction as per one xda member posted here, The qualcom hs - 9006/8 is displayed on the device manager and when I tried to flashed it with emergency mode, the result always the same. FAILS
hruaiapunte said:
Nothing on the screen. Not able to boot into recovery or adb is not working. The phone is just death. But, when I insert the usb cable, the pc can detect it. I even approach the Customer Care here in Aizawl, but they cannot fixed. Even when I followed the instruction as per one xda member posted here, The qualcom hs - 9006/8 is displayed on the device manager and when I tried to flashed it with emergency mode, the result always the same. FAILS
Click to expand...
Click to collapse
Try this:
- Start GNQC with the phone disconnected
- Connect the Phone and see GNQC recognizes the QLoader
- If so, press power button until the phone vibrates
- Wait for the GNQC recognizes again the QLoader and press Download on Emergency Mode
Use this KIKAT ROM: https://docs.google.com/uc?id=0B8H5JoBDpTnJMGE2QTJPR0FWX0E
This worked for me, i had the phone completly died, not even recognized by the PC, waited a day and tried again.
Once the QLoader is recognized your good to go!!
I'm having another problem after that, now theres no GSM/3G signals....
I need a EFS backup with the TWRP recovery.... No one seems to have
RSGI_PT said:
Try this:
- Start GNQC with the phone disconnected
- Connect the Phone and see GNQC recognizes the QLoader
- If so, press power button until the phone vibrates
- Wait for the GNQC recognizes again the QLoader and press Download on Emergency Mode
Use this KIKAT ROM: https://docs.google.com/uc?id=0B8H5JoBDpTnJMGE2QTJPR0FWX0E
This worked for me, i had the phone completly died, not even recognized by the PC, waited a day and tried again.
Once the QLoader is recognized your good to go!!
I'm having another problem after that, now theres no GSM/3G signals....
I need a EFS backup with the TWRP recovery.... No one seems to have
Click to expand...
Click to collapse
my e7 died. you are stuck using flash tools. is not even recognized by most PCs. maybe it drain? I can do? help me
I have the same problem, screen is completely black after trying to instal newer official rom. When I connect it to PC, it detects "hid device". I tried power + volume buttons combinations, but nothing changes. Sometimes notification led turn red for a few seconds but nothing else. And once win xp randomly detected phone as that "q..." thing, but it doesn't anymore. What else can I do?
Can anyone help me? I tried everything and my phone is still hardbricked.
Hello guys
Today i received my E7 and i tried to update via the tool unfortunately something went wrong and now i cant open it nor fastboot or recovery. Some hours ago i tried to connect via usb and appeared on the GNQC but later it showed as unknow device. It was my first day with the phone. Right when i connect /disconnect the usb i can hear the sound but i cant do anything. Is it dead or i can revive it somehow?
It was the first day:crying::crying:
Reinstall the drivesbob the PC, press 30 secs on the power button than connect the phone to the PC. If appears a QLoader port use emergency download on gnqc 1.6.9.0
RSGI said:
Reinstall the drivesbob the PC, press 30 secs on the power button than connect the phone to the PC. If appears a QLoader port use emergency download on gnqc 1.6.9.0
Click to expand...
Click to collapse
PLZ HELP i try to update using this http://www.needrom.com/download/gionee-elife-e7-32g/comment-page-2/#comment-165291 but now my phone doest enen boot or fast boot or anything.. in the proces it said "firehose ping phone fail" and stopped updating since then my phone isnt booting or anything and my pc dont recognize it any more.. plz help
---------- Post added at 15:32 ---------- Previous post was at 15:29 ----------
RSGI_PT said:
The phone starts? In a black screen?
If the PC detects it like that the phone has some energy and connection...
Does anything apears on the screen? Can you go to the Recovery Mod?
Have you tried to force the driver installation on that USB item that appears on device manager?
Do you have access via ADB or fastboot?
Did you nottest in what partition did the error message appeared?
Please provide some answers to these questions so i can try to help you...
Click to expand...
Click to collapse
plz help...
PLZ HELP i try to update using this http://www.needrom.com/download/gion...comment-165291 but now my phone doest enen boot or fast boot or anything.. in the proces it said "firehose ping phone fail" and stopped updating since then my phone isnt booting or anything and my pc dont recognize it any more.. plz help
thianpa he thil hi i solve thei toh m
Tried miui 12 and after flashing rom the twrp is gone I tried to reflash it the same way I did first but sadly when I'm on fastboot PC can't detect it. also tried it with other softwares but same result. Device is fine and responds when open but not in fastboot mode. Currently running miui 11 .0.6 China stable. Stucked. Also all drivers are updated
Same here.
I accidentally flashed china stable 11.0.4 zip rom on my global device through twrp and upon booting up twrp was gone and when i plug in usb the pc doesn't detect anything. In order to make pc detect the phone via usb cable i have to reboot phone while plugging usb to laptop that way file transfer option shows up in laptop and adb works but fastboot doesn't work i can force boot to fastboot through adb but upon booting to fastboot the pc stucks at waiting for device. All the drivers are installed
Currently on china stable 11.0.6
Same issue indeed
That's exactly what's happening right now. I hope someone can help us
Quote me if u find any luck.
Same issues
That happens me sometimes. I only reboot the device into fastboot again, reboot the computer, and that it. This may change depending on your computer CPU, mine is AMD. And ussually I have to use a 2.0 USB or if it still does not work a USB 2.0 hub. I know the hub thing is strange but it worked for me when my pc does not detect the phone in fastboot. Hope it helps .
With my PC I have to open device manager, look for the device, usually has a yellow sign next to it. Right click on the device name, click update driver, click browse my computer for driver software, click let me pick from a list of available drivers on my computer and pick mtp USB device. Then I read it. I hope this helps.
daniml3 said:
That happens me sometimes. I only reboot the device into fastboot again, reboot the computer, and that it. This may change depending on your computer CPU, mine is AMD. And ussually I have to use a 2.0 USB or if it still does not work a USB 2.0 hub. I know the hub thing is strange but it worked for me when my pc does not detect the phone in fastboot. Hope it helps .
Click to expand...
Click to collapse
What hub?
Tried with multiple pcs with no success
epicblue8 said:
What hub?
Tried with multiple pcs with no success
Click to expand...
Click to collapse
I use a usb hub that is very old i guess, as it uses MiniUSB. By the way with multiple computer it should work, your error is very strange, I never saw it. A thing that may work is trying to use fastboot on a Linux system (no, with VMs no). So if you can flash a pen drive with a Ubuntu ISO or any linux distro, boot linux,install fastboot and check if it detects your phone.
daniml3 said:
I use a usb hub that is very old i guess, as it uses MiniUSB. By the way with multiple computer it should work, your error is very strange, I never saw it. A thing that may work is trying to use fastboot on a Linux system (no, with VMs no). So if you can flash a pen drive with a Ubuntu ISO or any linux distro, boot linux,install fastboot and check if it detects your phone.
Click to expand...
Click to collapse
Read my 1st reply to this op
Even file transfer option doesn't show up if i connect my phone via usb to laptop.
In order to make pc show file transfer option i have to reboot phone while connecting the phone to pc so.
That way i can use adb but as soon as i boot to fastboot via cmd pc doesn't detect the fastboot mode.
Tried with 3 laptops
Issue Fixed
epicblue8 said:
Same here.
I accidentally flashed china stable 11.0.4 zip rom on my global device through twrp and upon booting up twrp was gone and when i plug in usb the pc doesn't detect anything. In order to make pc detect the phone via usb cable i have to reboot phone while plugging usb to laptop that way file transfer option shows up in laptop and adb works but fastboot doesn't work i can force boot to fastboot through adb but upon booting to fastboot the pc stucks at waiting for device. All the drivers are installed
Currently on china stable 11.0.6
Click to expand...
Click to collapse
Dude I fixed it and I managed to flash global and maybe reflash EU when miui 12 stable arrive
Try another type c cord preferable the original one. I just change the cord and everything went fine fastboot can now be detected via "fastboot devices".
Chipotle crackers said:
Dude I fixed it and I managed to flash global and maybe reflash EU when miui 12 stable arrive
Try another type c cord preferable the original one. I just change the cord and everything went fine fastboot can now be detected via "fastboot devices".
Click to expand...
Click to collapse
Not with original but tried 3 type c cables and 3 pcs
epicblue8 said:
Quote me if u find any luck.
Click to expand...
Click to collapse
hey have find any solutions? we have the same problem