[Q] I900 is dead ? - Galaxy S I9000 General

Hey guys!
I need yoyr help. My phone was dead since march 11. I don't remember what I'm done with it, but the following symptoms are:
- when I turn on the phone nothing exept Galaxy S GT-I9000 Samsung screen is showed.
- when I turn phone to download mode and connect it with my computer, nothing happens,no notifications, device manager nothing shows, I once showed: one of your devices has malfunction.
What should I do? USB plug is broken? My other phone have no problem with this MicroUSB cable from samsung and it's connecting to computer without any problems.
Edit:
I plug cable with turning on download mode. Now computer shows: one of your device has malfunction. DM error loop?

UP Please! Same problem!
Just can access download mode, but my PC doesn't recognise it.
It got stuck in the first logo and I can't access Recovery.

Mathsiel said:
UP Please! Same problem!
Just can access download mode, but my PC doesn't recognise it.
It got stuck in the first logo and I can't access Recovery.
Click to expand...
Click to collapse
You use odin right?
And correct drivers installed?
Sent from my GT-I9000 using Tapatalk 2

misiek1791 said:
Now computer shows: one of your device has malfunction. DM error loop?
Click to expand...
Click to collapse
use solution in
2) Problem:- Cannot connect to PC or Unknown Device, getting Code 43 or any other code or NO response when using USB cable in My Android Solutions
Mathsiel said:
Just can access download mode, but my PC doesn't recognise it.
It got stuck in the first logo and I can't access Recovery.
Click to expand...
Click to collapse
use solution in
1) Problem:- Cannot enter Download or Recovery Mode and
2) Problem:- Cannot connect to PC or Unknown Device, getting Code 43 or any other code or NO response when using USB cable in My Android Solutions

xsenman said:
use solution in
2) Problem:- Cannot connect to PC or Unknown Device, getting Code 43 or any other code or NO response when using USB cable in My Android Solutions
use solution in
1) Problem:- Cannot enter Download or Recovery Mode and
2) Problem:- Cannot connect to PC or Unknown Device, getting Code 43 or any other code or NO response when using USB cable in My Android Solutions
Click to expand...
Click to collapse
yep, I was checked this thing. And this is not helpful. Yes, have few good ideas but for my case... nothing I can use... Main reason: My computer don't show me any alerts or messages after plug in mUSB to phone...

I solved my problem. What I did was to use another PC, then just installed the Samsung drivers, plugged the phone in download mode and the the driver installed OK.
Odin recognised the phone too so I could flash a kernel.
I can't realize why my PC didn't recognize the phone. I tried reinstalling drivers, the android SDK but nothing worked.
Thanks for the answers.

misiek1791 said:
My computer don't show me any alerts or messages after plug in mUSB to phone...
Click to expand...
Click to collapse
And IF nothing worked and USB connection still fails no matter what, than it would be best to look into this

Related

Help Me Please Please

Hi
I Have Samsung Galaxy S.
I Have Installed Paranoid Custom ROM On My Device Now I Need To Flush The Original ROM
But I have Problem : When i connect my phone to pc the phone doesn't show any thing any connection massage and even if i enter the phone in downloading mode the pc and the phone doesn't show show any thing
Please I Need help i can't flash any stock rom please help:crying::crying::crying::crying:
Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)
http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2
I forgot to post links
Here will you find Stock Firmwares
http://cur.lv/2j5o
Flash Guide
http://cur.lv/2j5p
Drivers
http://cur.lv/2j5q
Flashprograms
http://cur.lv/2j5r
Service Manuals
http://cur.lv/2j5s
diklooc said:
Hi Syrian Eagle,
You should
Boot into "Download Mode"
start odin / heimdall
connect with computer via USB
load Stock firmware files
click on "Flash"- / "Start" - Button (I can't remember how is called)
Click to expand...
Click to collapse
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .
Kurre said:
http://forum.xda-developers.com/showthread.php?t=1637966
You could use this tutorial..you'll find package with Samsung drivers etc..make sure you have uninstalled old drivers & rebooted before installing new ones.
Also make sure you have working USB cable etc.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.
Syrian Eagle said:
The problem is when i connect my phone to pc the phone doesn't show any thing and the pc doesn't show any thing too .
when i connect my hone appears like if he is not connected.
Click to expand...
Click to collapse
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Syrian Eagle said:
Thanks for your help but my problem is when i connect my phone in download mode or regular mode the pc doesn't see my phone and my phone doesn't say any thing (like if he is not connected) i think not a driver issue because previously i connect the phone into ODIN but now after flushing the paranoid ROM this problem appear .
Click to expand...
Click to collapse
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.
Lexrsk said:
If you have come from a GingerBread ROM that would be correct.
ICS/JB ROMS USE DIFFERENT DRIVERS
Now follow the advise and reinstall the samsung drivers and try again.
Click to expand...
Click to collapse
Ok How Can I Install the ICS/JB Drivers into my phone :crying::crying::crying::crying:
xsenman said:
Your USB cable must be damaged or your USB port may need cleaning or damaged try these solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Click to expand...
Click to collapse
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected
Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2
Syrian Eagle said:
Thank you very much but my problem is not resolved because when i connect my phone into the pc my phone and the pc doesn't show any thing like if he is not connected
Click to expand...
Click to collapse
Every possible reason and solutions that I am aware of, for them are mentioned on that link , you have to try and test each one out, including various Drivers, for you to test...
BUT you keep saying there was no Sign of connection, which means the PC does not say anything (like unknown USB Device) or make a sound and your USB icon does not appear on the phone...am I correct???
That simply means there is NO link, which means, its either your USB cable or USB Port is damaged
alexovy said:
Turn off the phone, remove battery, wait 1 minute, put the battery back and restart the phone. Then connect the phone to your pc and see if that helped.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Sorry nothing get petter still the problem

Problem with LG Spirit: Secure booting error

Hi,
A friend of mine gave me his LG Spirit H440 with the boot error: Secure booting error
In his words he tried to update the software, the phone started to lag and after a reboot the error occurred.
The guy is simple user so installing custom recovery or rooting are out of the question.
Here is a video I made of the problem:
https://www.youtube.com/watch?v=fONioh6uNms
After removing the battery the phone starts for 2-3 seconds with Secure booting error and then powers off. After that it cannot start again until the battery is removed and then everything repeats.
I tried to connect it to the PC with Windows 8.1 and installed LG drivers, but nothing happens. It's not recognized.
Also tried to enter download mode with Vol Up and connecting the USB cable, but again it just displays the error and shuts down.
Is this soft or hard brick? I'll be grateful for any help and guidance.
Try to set it in "upload mode" and flash stock rom kdz
Sent from my LG-H440n using XDA-Developers mobile app
septix said:
Try to set it in "upload mode" and flash stock rom kdz
Sent from my LG-H440n using XDA-Developers mobile app
Click to expand...
Click to collapse
hey
how do i enter "upload mode"???
i have the same issue. please help.
dydbg said:
Hi,
A friend of mine gave me his LG Spirit H440 with the boot error: Secure booting error
In his words he tried to update the software, the phone started to lag and after a reboot the error occurred.
The guy is simple user so installing custom recovery or rooting are out of the question.
Here is a video I made of the problem:
https://www.youtube.com/watch?v=fONioh6uNms
After removing the battery the phone starts for 2-3 seconds with Secure booting error and then powers off. After that it cannot start again until the battery is removed and then everything repeats.
I tried to connect it to the PC with Windows 8.1 and installed LG drivers, but nothing happens. It's not recognized.
Also tried to enter download mode with Vol Up and connecting the USB cable, but again it just displays the error and shuts down.
Is this soft or hard brick? I'll be grateful for any help and guidance.
Click to expand...
Click to collapse
how did you solve this crappy error??
No I didn't manage to find a solution and no one was able to help me.
I returned it to my friend and he bought a new phone.
Sorry.
1. Power down the phone.
2. Connect USB cable to computer.
3. Hold Volume DOWN and insert the USB cable.
4. ??
5. Profit.
septix said:
1. Power down the phone.
2. Connect USB cable to computer.
3. Hold Volume DOWN and insert the USB cable.
4. ??
5. Profit.
Click to expand...
Click to collapse
im sorry for ignorance but FastBoot=Upload mode?
Same problem, is there a BOARD DIAG option for this phone?

[Help] No Recovery, Boot loop, and not recognized by Odin

Seems I've hit the jackpot, my phone's a potato. I had just installed king of nougat v9 and it worked fine until I rebooted into recovery by holding the power button and selecting recovery. At first it was in a boot loop and wouldn't open recovery or get recognized by odin, I read somewhere here to disconnect the battery so I opened the back cover and disconnected it which apparently ****ed the phone a step further now it's dead unless it's connected to a power source and after disconnecting it stays on samsung logo/download mode for a bit then dies.
On my old rom it was working fine except for the fact that I couldn't connect the phone to pc as storage, and it couldn't recognize usb devices I plugged in using the adapter. I took the phone to a repair shop and they said they replaced the micro usb assembly and it still didn't show up on odin, then a few days later they said it's a problem with the power IC and they replaced that then the guy said it worked once on odin then stopped again.
Idk what to do lol, phone's bricked or should I try a different repair shop incase these were idiots.
note: it says device descriptor request failed when connected to pc
Have you tried to reboot to the bootloader by holding down the power button, home button and volume down when your phone is at the android logo?
TheSproker said:
Have you tried to reboot to the bootloader by holding down the power button, home button and volume down when your phone is at the android logo?
Click to expand...
Click to collapse
yeah it gets into download mode but it doesn't show up on odin
HNDRXX said:
yeah it gets into download mode but it doesn't show up on odin
Click to expand...
Click to collapse
Then it means you must install Samsung drivers, so that the computer would recognize your phone. Try downloading smart switch or kies and that should also install the drivers.
or try different ver. of odin
TheSproker said:
Then it means you must install Samsung drivers, so that the computer would recognize your phone. Try downloading smart switch or kies and that should also install the drivers.
Click to expand...
Click to collapse
yaro666 said:
or try different ver. of odin
Click to expand...
Click to collapse
tried both of the above
Try clean install Samsung Drivers and other version of Odin. It should be (have to be) show in Odin after all of these.
hacklesss said:
Try clean install Samsung Drivers and other version of Odin. It should be (have to be) show in Odin after all of these.
Click to expand...
Click to collapse
no luck there's definitely a hardware issue.
HNDRXX said:
no luck there's definitely a hardware issue.
Click to expand...
Click to collapse
Is pc respond when you plug usb cable ? (In download mode)
hacklesss said:
Is pc respond when you plug usb cable ? (In download mode)
Click to expand...
Click to collapse
it says device descriptor request failed when connected to pc
"device descriptor request failed when connected to pc" sounds like a windows problem not android. You can check in the "computer management" device manager to see if the phone is recognized. I am going to assume not.
Try this link for possible solutions. https://www.drivereasy.com/knowledg...ice-descriptor-request-failed-for-windows-10/
surfer3000 said:
"device descriptor request failed when connected to pc" sounds like a windows problem not android. You can check in the "computer management" device manager to see if the phone is recognized. I am going to assume not.
Try this link for possible solutions. https://www.drivereasy.com/knowledg...ice-descriptor-request-failed-for-windows-10/
Click to expand...
Click to collapse
I agree with that %100 percent ?
HNDRXX said:
no luck there's definitely a hardware issue.
Click to expand...
Click to collapse
Hey, do you figured it out what problem it is? I've the same problem and tried all of the PC/Windows tips and tricks.

Samsung A5 (A-510M) PC does not recognize "failed to find /misc partition"

Hello:
First of all, excuse me, I'm using a translator because my English is not very good. I was using a custom rom and wanted to back to stock so I flashed the correct firmware for my model (A-510M ARO NOUGAT) via ODIN. The process ended and had no errors. When I turned on the phone and connected it to my pc and it does not recognize it, it only charges the battery. I tried to format from the recovery and it shows the message "failed to find / misc partition"
- I tried with other USB cables.
- I tested it with other USB ports.
- I've updated Samsung drivers.
- I tried the secret menu and it does not work.
- does not recognize the download mode either
- I can not use ODIN to reinstall the firmware.
- Samsung Kies does not recognize the phone.
- Does not recognize ADB mode
The truth is that I am desperate and I do not know what to do. I can not reinstall the firmware if the PC does not recognize it. If anyone knows a possible solution I am very grateful.
thanks to all
i came across your situation long ago. it is the pc that doesn't recognize your phone. try with different pc. also you can try to format using settings>backup & reset menu. I ended up resetting my pc in order to recognize my phone.
[email protected] said:
i came across your situation long ago. it is the pc that doesn't recognize your phone. try with different pc. also you can try to format using settings>backup & reset menu. I ended up resetting my pc in order to recognize my phone.
Click to expand...
Click to collapse
Hi! I tried but is not working. I discover a new problem: when i connect the USB cable the phone shows me a message: "the battery temperature is very low. Charge stopped". Could be another the problem?
Thank you all
dhg2015 said:
Hello:
First of all, excuse me, I'm using a translator because my English is not very good. I was using a custom rom and wanted to back to stock so I flashed the correct firmware for my model (A-510M ARO NOUGAT) via ODIN. The process ended and had no errors. When I turned on the phone and connected it to my pc and it does not recognize it, it only charges the battery. I tried to format from the recovery and it shows the message "failed to find / misc partition"
- I tried with other USB cables.
- I tested it with other USB ports.
- I've updated Samsung drivers.
- I tried the secret menu and it does not work.
- does not recognize the download mode either
- I can not use ODIN to reinstall the firmware.
- Samsung Kies does not recognize the phone.
- Does not recognize ADB mode
The truth is that I am desperate and I do not know what to do. I can not reinstall the firmware if the PC does not recognize it. If anyone knows a possible solution I am very grateful.
thanks to all
Click to expand...
Click to collapse
I have similar problem but i did nothing like rom flashing. One day, the pc just don't recognise the phone, even in download mode. I tried differents pc, differents cables and ports...nothing. i tried *#0808#, drivers reinstallation, nothing... when i connect the phone, the pc display "unknown device code 43" and the phone just get charging. OTG doesn't work
Sent from my Samsung SM-A9000 using XDA Labs
I have a similar problem...I downloaded the correct firm ware...restart the phone hard restate the phone but I still get error failed to find misc/partion...please help me...and it stays in ftp lock
Trent69 said:
I have a similar problem...I downloaded the correct firm ware...restart the phone hard restate the phone but I still get error failed to find misc/partion...please help me...and it stays in ftp lock
Click to expand...
Click to collapse
No worries. We don't have misc partition so it's normal.
FRP lock won't reset on firmware flash. You need to enter your google account on boot.
To disable frp lock before factory reset next time, either remove your google account from your phone, or disable screen lock before reset.
You can't flash new firmware from download mode if you are in frp lock.

S10+ Bricked? or just weird

So, i just got an s10+ exynos from a friend, the screen is ok and the back too, the problem is that the phone is weird asf
i'm trying to put it in download mode for like 2 days
so, the phone show the samsung s10+ logo if i plug it on a outlet
BUT if i plug the phone on my pc usb, the screen just goes black and vibrate every 5 seconds or 10 idk
can anyone help me?
ps : i flashed the phone one time, and it failed (device info) in odin, and now if i sucess to boot it in download mode, the phone is not detected by odin
please someone can help me
Goldmnkey said:
So, i just got an s10+ exynos from a friend, the screen is ok and the back too, the problem is that the phone is weird asf
i'm trying to put it in download mode for like 2 days
so, the phone show the samsung s10+ logo if i plug it on a outlet
BUT if i plug the phone on my pc usb, the screen just goes black and vibrate every 5 seconds or 10 idk
can anyone help me?
ps : i flashed the phone one time, and it failed (device info) in odin, and now if i sucess to boot it in download mode, the phone is not detected by odin
please someone can help me
Click to expand...
Click to collapse
ok, so you can or can not reliably get the screen to show download mode?
i can't even go in download mode sadly
Goldmnkey said:
i can't even go in download mode sadly
Click to expand...
Click to collapse
is the battery dead as a doornail?
the battery don't look like it's dead because when i plug the phone it vibrates like a bootloop, but black screen |ONLY ON USB| BUT if i plug it on a outlet the samsung screen show up but bootloop and if i unplug it the screen goes off and nothing happen
Goldmnkey said:
the battery don't look like it's dead because when i plug the phone it vibrates like a bootloop, but black screen |ONLY ON USB| BUT if i plug it on a outlet the samsung screen show up but bootloop and if i unplug it the screen goes off and nothing happen
Click to expand...
Click to collapse
update : i can boot into download mode if it's plugged on a outlet, but i still can't if usb, anyone can help me pleasee
Goldmnkey said:
update : i can boot into download mode if it's plugged on a outlet, but i still can't if usb, anyone can help me pleasee
Click to expand...
Click to collapse
Try another cable and/or usb port.
Try accessing using Windows Drive Management if not already.
Check Windows Event Viewer for error messages.
blackhawk said:
Try another cable and/or usb port.
Try accessing using Windows Drive Management if not already.
Check Windows Event Viewer for error messages.
Click to expand...
Click to collapse
UPDATE :
ok, now i can enter download mode, but the phone is not detected by odin, it's detected by the pc but not odin.
already tried to re-install kies, samsung usb drivers and smart switch nothing works, can someone help me ? i broke my main phone and i need this one
Goldmnkey said:
UPDATE :
ok, now i can enter download mode, but the phone is not detected by odin, it's detected by the pc but not odin.
already tried to re-install kies, samsung usb drivers and smart switch nothing works, can someone help me ? i broke my main phone and i need this one
Click to expand...
Click to collapse
I never used Odin.
-Reboot- always reboot...
Try again.
Try another (all) USB port(s).
Check Event Viewer for error messages.

Categories

Resources