Database Users

I effed up, learn from my mistake...

Well, I'll be getting my $100 replacement tomorrow.
I'm usually very handy with electronics, I used to take my Blackberry's apart all the time and blow the dust out.
So I read up on disassembling the EVO and thought "this is gonna be a piece of cake". Well every set of instructions I found said it was SOO easy to take it apart, what they didn't say was they were assuming you have a replacement screen ready to go and that trying to remove the screen from the bezel separated the touch input from the backside of the glass.
Maybe I did it wrong but I broke my precious and almost cried.. a little.
I no longer have any touch input on the bottom half of the screen including the 4 buttons at the bottom. And you can see from the front how it looks like a clear sticker has been pulled apart from the glass. The LCD is fine, just totally jacked up the touch input.
So the purpose of this thread is to warn anyone else who may consider disassembling their EVO to read more than I did.
It may actually be very easy to get the thing apart, getting it back together is another story

Ouch man that sucks
From the fade

Condolences for the dear departed one. A point well taken, thanks!
Although I've "played" with dismantling many electronics during my days, this is one I would not take on. I even opted for the additional cost with BestBuy for their low price replacement for our 2 Evo's.

hmmm........

Aww man so sorry for you lost. That's great you've put up this post as I was just thinking about replacing my evo casing from all the cosmetic damage I've put on it while dropping. Thanks to you my friend this make my decision much easier.

I was going to do the same thing for the same purpose. Thanks for the heads up.
Sent From My HTC Evo 4G Using Tapa Talk Pro!

Part the EVO out so that she may live on in someone else's phone.
BTW that quote is hilarious. I think I remember seeing that around somewhere.

lmao....smh

Couldn't you have just bought a screen on ebay for cheaper?
Sent from my PC36100 using XDA App

Reminds me when I took apart my g1 to change the housing, it was a mess of circuit boards, wires and ribbons.

Can anyone else share their similar experiences? I have a large amount of dust in the upper left in my week old evo, and would would like to clean it out.
Sent from my EVO

Hmmm. you can buy the touch screen for like $50-$60 on ebay unless you are talking about a different part.
http://cgi.ebay.com/NEW-HTC-EVO-4G-TOUCH-SCREEN-LENS-DIGITIZER-REPLACEMENT-/130419345987?pt=PDA_Accessories&hash=item1e5d994a43

malibu_23 said:
lmao....smh
Click to expand...
Click to collapse
..what does "smh" mean?
tinybfk said:
Couldn't you have just bought a screen on ebay for cheaper?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
dwertz said:
Hmmm. you can buy the touch screen for like $50-$60 on ebay unless you are talking about a different part.
http://cgi.ebay.com/NEW-HTC-EVO-4G-TOUCH-SCREEN-LENS-DIGITIZER-REPLACEMENT-/130419345987?pt=PDA_Accessories&hash=item1e5d994a43
Click to expand...
Click to collapse
Damn, I didn't even think of looking. Actually my girl called Sprint and ordered the replacement the next morning without telling me.
It arrived this morning, its a refurb. The bezel is cracked and there's a bright spot on the screen. I called asurion right away, they shipped another already. Im keeping my fingers crossed that the next is in better condition.
Thanks for the link though!

if that was me a piece of me would have died

nebenezer said:
..what does "smh" mean?
Thanks for the link though!
Click to expand...
Click to collapse
http://www.internetslang.com/default.asp?s=smh

phatmanxxl said:
http://www.internetslang.com/default.asp?s=smh
Click to expand...
Click to collapse
lol.. yeah I've done quite a lot of that lately..
thanks for the link

nebenezer said:
lol.. yeah I've done quite a lot of that lately..
thanks for the link
Click to expand...
Click to collapse
No problem, MTFBWY

That sucks alot!!!

I did the same thing, wish I'd have read this post first! I had the dust in the upper left of my screen. I have taken this phone apart before, but not removed the glass. In attempting to remove the glass I messed up the upper right corner of the touch screen (just a small area but still sucks!) and now the tint of some colors is messed up. Also rashed up the plastic on the edges some. Oh and I did get the glass off just enough to spread the friggin dust all around haha. Oh well it's livable until June when I can get a full upgrade (hopefully the EVO 3D!). Let my post here serve as a SECOND warning for those who want to attempt to remove the dust themselves. The glass is glued down and you pretty much have to destroy the phone to remove it. Don't try it!!

dwertz said:
Hmmm. you can buy the touch screen for like $50-$60 on ebay unless you are talking about a different part.
http://cgi.ebay.com/NEW-HTC-EVO-4G-TOUCH-SCREEN-LENS-DIGITIZER-REPLACEMENT-/130419345987?pt=PDA_Accessories&hash=item1e5d994a43
Click to expand...
Click to collapse
I ordered this same part and a new housing because I cracked my digitizer earlier this week. Thanks for the post, OP, because I plan on taking mine apart this weekend to replace it. Wish me luck! lol

replace lcd/digitizer

My screen is cracked to all hell. Is there a youtube video showing a strip down of the epic? Is there a guide on how to replace it? I have the lcd and ditizer,so I'm all set except for the actual replacement. LOL
Tia

would you mind sharing the source for the screen/digitizer for those that haven't broken their screens yet ?
Just curious.
I do not know how to tear it down yet though.
Thanks for sharing.

I got it from an interstate wireless on 7 mile for like 60$ lol
Anyone?

igotsthemagicinme said:
I got it from an interstate wireless on 7 mile for like 60$ lol
Anyone?
Click to expand...
Click to collapse
You sure you got the right screen? Epic uses SAMOLED, not LCD... also, the digitizer and the LEDs are part of the same construct (one of the reasons it's "super"), so you'd effectively be really just changing the display with integrated digitizer. The glass itself is glued to the plastic case. You'd need to find a way to pull it up, from what I can tell. (I have not ever taken one apart, but it is almost certain that it is a glued screen, which explains why some people are having peeling issues (my Evo had this.))

There is not much for the Epic but some info for the original Galaxy S
http://forum.xda-developers.com/showthread.php?t=745262
Dissemble of Galaxy S:
http://www.careace.net/2010/06/09/disassembly-of-the-samsung-galaxy-s/
and there are some tear-down pics of the Epic
Thats prob all info there is :/

APOLAUF said:
You sure you got the right screen? Epic uses SAMOLED, not LCD... also, the digitizer and the LEDs are part of the same construct (one of the reasons it's "super"), so you'd effectively be really just changing the display with integrated digitizer. The glass itself is glued to the plastic case. You'd need to find a way to pull it up, from what I can tell. (I have not ever taken one apart, but it is almost certain that it is a glued screen, which explains why some people are having peeling issues (my Evo had this.))
Click to expand...
Click to collapse
yea i was just saying "lcd" i got the right one i know
taking a look at the links below

ok well by the looks of it, its pretty much the same thing. i talked to a tech at a repair center, and he said he MIGHT be able to do it. if not, i think i probably have about 70% chance of getting it right. the video showed a break down right down to the digitizer, and it looks almost EXACTLY like that i have, so in theory, i should just have to go as far as gettting the back off, and putting the back BACK on the NEW digitizer/amoleisupmyassed, right?
also, just for clarification, i know i have the right one bcuz i can see the button whole thingies and its the same as what the epic has (menu, home, back, search)
thanks for the useful links& help guys

Ahh sprint hooked me up put the screen on for me...mmm...such a beautiful display...

igotsthemagicinme said:
Ahh sprint hooked me up put the screen on for me...mmm...such a beautiful display...
Click to expand...
Click to collapse
Did they charge anything?

lehaman310 said:
Did they charge anything?
Click to expand...
Click to collapse
Nooooope

Any update on manuals/instructions for this? My own is out of warranty and not even running on Sprint.

Chabsin said:
Any update on manuals/instructions for this? My own is out of warranty and not even running on Sprint.
Click to expand...
Click to collapse
How is it out of warranty when it hasn't even been out for a year? or did you mod it or something?

igotsthemagicinme said:
Ahh sprint hooked me up put the screen on for me...mmm...such a beautiful display...
Click to expand...
Click to collapse
just curious...so sprint installed the screen you purchased or they installed one of their own? I had to do this on an htc phone a while back and it was much easier than I imagined.
Sent from my SPH-D700 using Tapatalk

I purchased a bad esn phone off ebay. I run it on a different network. You think a Sprint store would do something for me?!

Demianwulf said:
I had to do this on an htc phone a while back and it was much easier than I imagined.
Click to expand...
Click to collapse
I've watched a video for another galaxy phone ... the reason I'm nervous about this one is because on the Epic the screen is on a separate part of the assembly because of the keyboard.
Also: The video shows how to take it apart .. but not how to put it together again. Do I need to glue it together again? What type of glue?

Chabsin said:
I've watched a video for another galaxy phone ... the reason I'm nervous about this one is because on the Epic the screen is on a separate part of the assembly because of the keyboard.
Also: The video shows how to take it apart .. but not how to put it together again. Do I need to glue it together again? What type of glue?
Click to expand...
Click to collapse
If your seriously considering using glue...crazy glue is the way to go >.> (pun intended)
I still don't understand, why are you out of warranty? samsung offers a 1 year warranty...

does one not have to deal with sprint?
Does changing the software so that it runs on a different network not void the warranty?
Sent from my SPH-D700 using XDA App

Chabsin said:
does one not have to deal with sprint?
Does changing the software so that it runs on a different network not void the warranty?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
No even though Sprint has it in their system as marked "bad esn" samsung will not have to do with this. Although I don't think Samsungs warranty covers accidents, such as dropping your phone and cracking the screen.
Hope you get it figured out!
Sincerely,
D3luSi0n4L

Chabsin said:
does one not have to deal with sprint?
Does changing the software so that it runs on a different network not void the warranty?
Click to expand...
Click to collapse
Well Samsung has their own warranty thing...but I would confirm by contacting Samsung..don't tell them you swapped networks or anything of course..otherwise I don't think they would bother to check...
You can always flash it back too..unless phone doesnt work completely?

I got the whole screen + keyboard for under $60 on ebay. It turned out to be as simple as unscrewing and unsnapping the cover, disconnecting three connectors, removing the electronics and putting them in to the new frame. If I'd have to do it again it wouldn't take more than 15 minutes.
Sent from my SPH-D700 using XDA App

Somehow "broke" my replacement digitizer - help?

The dis-assembly went rather smoothly. When I was kind of finangling to get the new digitizer on, I noticed that the actual strip had become lose. I believe this may have been caused by the heat of my hand - or perhaps it was fault to begin with.
Now looking at the circuitry and the ribbon itself, it doesn't seem like anything is broken. Would there be any way for me to adhere the ribbon back on properly in order to make my digitizer work again? I don't really have the money to shell out for a brand new one and this is a bit of a pain in the butt.
Thanks in advance.
- Ben

breeezzz said:
The dis-assembly went rather smoothly. When I was kind of finangling to get the new digitizer on, I noticed that the actual strip had become lose. I believe this may have been caused by the heat of my hand - or perhaps it was fault to begin with.
Now looking at the circuitry and the ribbon itself, it doesn't seem like anything is broken. Would there be any way for me to adhere the ribbon back on properly in order to make my digitizer work again? I don't really have the money to shell out for a brand new one and this is a bit of a pain in the butt.
Thanks in advance.
- Ben
Click to expand...
Click to collapse
I think it may be a fault in the replacement you ordered and should request a new one. The "heat" from your hand couldnt have done that, and if it did, that would have happened anyway because the internals of the phone would get much hotter

Wond3r said:
I think it may be a default in the replacement you ordered and should request a new one. The "heat" from your hand couldnt have done that, and if it did, that would have happened anyway because the internals of the phone would get much hotter
Click to expand...
Click to collapse
I'm fairly sure it was quite loose right when I took it out of the package. It pretty much slipped off kind of like a soapy sticker. This can't be right, can it?

Wond3r said:
I think it may be a default in the replacement you ordered and should request a new one. The "heat" from your hand couldnt have done that, and if it did, that would have happened anyway because the internals of the phone would get much hotter
Click to expand...
Click to collapse
+1if it couldnt withstand a soft install then it prolly wouldnt have have lasted a week inside the phone anyway send it back in just tell em they sent ya junk
Sent from my MB860 using Tapatalk

ltdanno360 said:
+1if it couldnt withstand a soft install then it prolly wouldnt have have lasted a week inside the phone anyway send it back in just tell em they sent ya junk
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
Perfect. The part definitely seemed strange from the get-go. The company offered me 10% off, which I don't really feel is fair if the part is actually defective.
I've linked them to this thread, so if some more people could chime in that would be absolutely great.

So the part is defective and they wont replace it free?
Nice business model. Sounds shady.
Sent from my MB860 using xda premium

Yeah it defiantly must be dodgy as I have broken my screen and fitted a new digiziter and it has functioned flawlessly. No damage whatsoever during installation, you should defiantly get a refund

sebbo90 said:
Yeah it defiantly must be dodgy as I have broken my screen and fitted a new digiziter and it has functioned flawlessly. No damage whatsoever during installation, you should defiantly get a refund
Click to expand...
Click to collapse
Thanks so much for the input guys.

let me gess did you buy from repair universe ive heard people say that there lcd screens and digitizers were broken upon arival and the company failed to make good on it claimed they were broke during installation (soo bs ) :banghead:
Sent from my MB860 using Tapatalk

breeezzz said:
Perfect. The part definitely seemed strange from the get-go. The company offered me 10% off, which I don't really feel is fair if the part is actually defective.
I've linked them to this thread, so if some more people could chime in that would be absolutely great.
Click to expand...
Click to collapse
Threaten to get BBB involved. That's the only way I got repair universe to send me a replacement after many emails about the matter. The digitizer they sent me had the ribbon cut nearly in half. Gave me the run around about how their stuff is fully tested before leaving the site and if I could take a picture. I told them all I wanted was my digitizer and if they couldn't honor their return policy I would call BBB and report. I was given the RMA the next email.
Sent from my MB860 using XDA App

pre4speed said:
Threaten to get BBB involved. That's the only way I got repair universe to send me a replacement after many emails about the matter. The digitizer they sent me had the ribbon cut nearly in half. Gave me the run around about how their stuff is fully tested before leaving the site and if I could take a picture. I told them all I wanted was my digitizer and if they couldn't honor their return policy I would call BBB and report. I was given the RMA the next email.
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
It's sad it has to boil down to that though.
Hopefully, though, intervention will either get you your money back or a replacement.
Sent from my Galaxy Nexus using Tapatalk

nosit1 said:
It's sad it has to boil down to that though.
Hopefully, though, intervention will either get you your money back or a replacement.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
I agree, but like you said. When you are dealing with an internet company with no supposed phone support, sometimes that's what needs to be done. Although I did eventually find a phone number for them, I didn't need to use it before they finally made it right.
Sent from my MB860 using XDA App

Cracks in the aluminum

Cracks in the aluminum. Just noticed today that my phone has cracks in the aluminum, i have never dropped the device and have had a Silicon cover on it.
I called the reseller and they want to send it to samsung, but that's gonna take like 2-3 weeks And samsung said that the warranty is gone, cus i have rooted it, but it has nothing to do with the software.
Anyone else that have seen this?

Pete_79 said:
Cracks in the aluminum. Just noticed today that my phone has cracks in the aluminum, i have never dropped the device and have had a Silicon cover on it.
I called the reseller and they want to send it to samsung, but that's gonna take like 2-3 weeks And samsung said that the warranty is gone, cus i have rooted it, but it has nothing to do with the software.
Anyone else that have seen this?
Click to expand...
Click to collapse
flash a stock rom

blgblade said:
flash a stock rom
Click to expand...
Click to collapse
Yeah, that was my thought to, but dont i have to use triangle away aswell?

Pete_79 said:
Yeah, that was my thought to, but dont i have to use triangle away aswell?
Click to expand...
Click to collapse
From CF-Root 6.4 thread:
How to uninstall
This is by no means an extensive guide for unrooting, but if you want to sell or warranty your device, I advise the following procedure:
- Use Triangle Away to reset the flash counters, and pull the battery immediately after rebooting starts
- Boot into recovery and perform a wipe, and pull the battery immediately after rebooting starts
- Go to SamMobile and get the stock firmware for your region
- Flash that stock firmware on your device
- Let Android boot, go through device setup (without doing any logins) until Android is fully usable again
- Reboot
- Wait at least 10 minutes
- Check Settings->About device->Status and make sure Device status is not "Modified"
- Perform another factory reset
- Boot into download mode and make sure the flash counter and system status are all set to official
Some of these steps may require further info, if you can't figure it out, do some more searching, or ask people who aren't me
Click to expand...
Click to collapse

Pete_79 said:
Cracks in the aluminum. Just noticed today that my phone has cracks in the aluminum, i have never dropped the device and have had a Silicon cover on it.
I called the reseller and they want to send it to samsung, but that's gonna take like 2-3 weeks And samsung said that the warranty is gone, cus i have rooted it, but it has nothing to do with the software.
Anyone else that have seen this?
Click to expand...
Click to collapse
Interesting... It does not look like a crack but a precise vertical cut.

Oh for God's sake this is like the 50th thread about this! And it's not a cut these phones do crack.
Sent from my GT-I9300 using XDA

Se23 said:
Oh for God's sake this is like the 50th thread about this! And it's not a cut these phones do crack.
Sent from my GT-I9300 using XDA
Click to expand...
Click to collapse
Sorry, i did try to search, but the search function seams to be broken?
I honestly don't know what to do, flash stock and send it to repair or just live with is :/

One it does look like a cut from the picture but visual inspection may show a crack .
What will Samsung say crack or cut when they look at it .
But you do say cracks not one crack .
Two removing traces of root is easy and returns phone to a warranty state .
So do you want to remove root return the phone and get it back in a few weeks saying not warranty its damaged .
In that respect could you not get a local store to just look at the crack first to confirm it is and save wasting time .
jje

I have one of these too!

I have vertical CUTS at all 4 corners, where they smooshed together the pieces. There is no space between the two sides of the cut, and you can't even feel it, but it's there and visible if you look for it. My phone has been dropped a fair amount, but the cuts were there the day I got it.
"Don't worry about it" is my advice.
* BTW, yours is definitely a crack. I still just wouldn't worry about it.

I have one on the bottom right corner too. And it looks more like a joint than a crack
Sent from my GT-I9300 using xda app-developers app

It looks like that. Dont microscope your Phones corners!
Sent from my GT-I9300 using xda app-developers app

its there in all the four corners and it looks like some sort of cover and not crack
Sent from galaxy s3

big_adventure said:
I have vertical CUTS at all 4 corners, where they smooshed together the pieces. There is no space between the two sides of the cut, and you can't even feel it, but it's there and visible if you look for it. My phone has been dropped a fair amount, but the cuts were there the day I got it.
"Don't worry about it" is my advice.
* BTW, yours is definitely a crack. I still just wouldn't worry about it.
Click to expand...
Click to collapse
This

Se23 said:
Oh for God's sake this is like the 50th thread about this! And it's not a cut these phones do crack.
Sent from my GT-I9300 using XDA
Click to expand...
Click to collapse
Don't listen to the others telling you nit to worry. If you haven't dropped it get on to the place of purchase asap. I made the mistake of not doing that and dented my phone a little after so I'm out of luck. It will split all the way through soon. The ones in the four corners r normal.
Sent from my GT-I9300 using XDA

Damn same thing on mine.
Should send back to Samsung but they say I drop it cost £100 to replace
Sent from my GT-I9300 using xda app-developers app

Same on mine, can't say I'm bothered though. Mine are quite obviously from manufacture.
Sent from my GT-I9300 using xda premium

Se23 said:
Oh for God's sake this is like the 50th thread about this! And it's not a cut these phones do crack.
Sent from my GT-I9300 using XDA
Click to expand...
Click to collapse
Wwwhaaaaat!!! These phones do whaaaaaaaaaaaaattt!!!
---------- Post added at 03:48 AM ---------- Previous post was at 03:45 AM ----------
These cracks appears in white phone only?!

Have the blue and all 4 corners have the crack. Not sure if this is consider normal! Been looking at high res photos of the phone and they aren't there, so question is how is this normal?! I will go to samsung monday and check this.

I did drop my phone. Samsung are say the cracks are from the phone been dropped.
I think it's from the over heating problem the phone got.
Sent from my GT-I9300 using xda app-developers app

[Q] Water Damaged S4... why me? [UPDATED]

Well I did it... Water damaged S4. I was on vaca on Hilton Head when I took my phone with me into the pool completely forgetting I had it in my pocket. Insurance was useless because I only added it after the occurrence and they can apparently see now if there is any active use on the phone in question so they said no. So I guess I have just a couple of questions:
#1 How salvageable is this device? I have read some other posts about taking the phone apart and using ethanol or isopropal to remove any chemical or salt deposits.
#2 Is this even worth trying...? Based off the pics is this even a worth while cause?
Thanks and plz belay the '[email protected] comments. I have been through it all since this past Friday.
UPDATE:
Well after a few hours with the isopropal alc. and a toothbrush I got the phone all cleaned up and dried with a hairdryer. This was a few hours ago but I decided to give it a try and put the battery back in. Unfortunately I think it succumbed to the damage- all that would happen is the usual vibrate as you hold down the power button but the screen will not light up and no sound.
Someone noted that the corrosion looked especially bad... it was probably all the chlorine build up as I had the phone submerged for about 5-10 minutes. I posted some 'AFTER' pics of my cleaning job and you may notice that there may have been some shorting or heat damage done to some of the components.
Lastly, after a heartfelt conversation with my wife about what my options were we discussed the notion of adding a line to our plan as we'll have need of a 'home' phone eventually (jr. coming in July). So I think I may be able to trade in the iphone 4 I've been using and get another one.

That looks like some pretty bad corrosion. I've had luck in the past with removing all the parts attached to the logic board and giving it an "acid bath" in isopropal and scraping what you can away with like a spudger or a toothpick. I also believe that the display assembly and LCD are fused together, so while you hopefully don't have leakage into that area.
That being said, that is some of the oddest residue I have seen from water damage, maybe because of the salts/chemicals used in the pool? You might try and tear down as much as you can in terms of mid-frames and the like, and use a dampened cloth to remove all of that gunk.
Worst that can happen is that it doesn't work and you sell it on ebay as "slightly used"
Here is the ifixit guide, best of luck to you! http://www.ifixit.com/Teardown/Samsung+Galaxy+S4+Teardown/13947/1

I use raw acetone to clean water damaged phones. Sometimes it works sometimes it doesnt
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta

cinnabar said:
Well I did it... Water damaged S4. I was on vaca on Hilton Head when I took my phone with me into the pool completely forgetting I had it in my pocket. Insurance was useless because I only added it after the occurrence and they can apparently see now if there is any active use on the phone in question so they said no. So I guess I have just a couple of questions:
#1 How salvageable is this device? I have read some other posts about taking the phone apart and using ethanol or isopropal to remove any chemical or salt deposits.
#2 Is this even worth trying...? Based off the pics is this even a worth while cause?
Thanks and plz belay the '[email protected] comments. I have been through it all since this past Friday.
Click to expand...
Click to collapse
Wow, dude sorry, good pics, before you do anything, get some dry white rice, put in a sealed plastic bag, seal each part in the rice for 24-48hrs...it may work, had a friend drop his in tolit, we got it to work using this process, what could trying it hurt eh? Good Luck.

Z51 said:
I use raw acetone to clean water damaged phones. Sometimes it works sometimes it doesnt
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta
Click to expand...
Click to collapse
TheAxman said:
Wow, dude sorry, good pics, before you do anything, get some dry white rice, put in a sealed plastic bag, seal each part in the rice for 24-48hrs...it may work, had a friend drop his in tolit, we got it to work using this process, what could trying it hurt eh? Good Luck.
Click to expand...
Click to collapse
Sorry to say, but I think it's too far gone for any of these suggestions. Those methods are meant for immediate action after taking a short dip in water (such as a toilet). From the looks of those pictures, I'd say you did some good long swimming in that pool before realizing your phone was along for the ride. So I think you may be SOL. Just a forewarning in case you try some of these methods with high expectations.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

plwalsh88 said:
Sorry to say, but I think it's too far gone for any of these suggestions. Those methods are meant for immediate action after taking a short dip in water (such as a toilet). From the looks of those pictures, I'd say you did some good long swimming in that pool before realizing your phone was along for the ride. So I think you may be SOL. Just a forewarning in case you try some of these methods with high expectations.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
I agree 100%
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta

Check with your credit card company. You might be covered under their accidental damage coverage policy, if any.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Would at&t insurance or squaretrade cover this?

nani4215 said:
Check with your credit card company. You might be covered under their accidental damage coverage policy, if any.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Great suggestion, also I have heard that some home insurance company's do the same thing
Sent from my SAMSUNG-SGH-I337 using xda premium

probably not the best idea to post a picture with your imei, in case you do get your phone working. Just throwing that out there.

mudknot2005 said:
probably not the best idea to post a picture with your imei, in case you do get your phone working. Just throwing that out there.
Click to expand...
Click to collapse
What this guy said! OP I would immediately remove your first picture or black out your IMEI and Serial.. Like five minutes ago lol
Sent from my SGH-I337 using xda premium

mudknot2005 said:
probably not the best idea to post a picture with your imei, in case you do get your phone working. Just throwing that out there.
Click to expand...
Click to collapse
More likely he is in no danger of getting that phone working again.

ricktat said:
More likely he is in no danger of getting that phone working again.
Click to expand...
Click to collapse
That phone is beyond repair, looks very bad. I had my captivate sit in the tub for 3 hours and when I opened it, it didnt look anything like that and after a few hours the phone was back at work with a new battery. Sorry OP but you have a very expensive paper weight.

mudknot2005 said:
probably not the best idea to post a picture with your imei, in case you do get your phone working. Just throwing that out there.
Click to expand...
Click to collapse
Myth # 115

nani4215 said:
Check with your credit card company. You might be covered under their accidental damage coverage policy, if any.
Click to expand...
Click to collapse
I actually did just that. Amex has it covered under their purchase protection so I'm covered financially, now its just the fact that I now have a AT&T Contract with nothing to show for it...

I did exactly the same thing on vacation with an iphone 4s. After that I paid and sent my new phone to a company that waterproofs the boards and components in the phone. Was only like 45 dollars plus shipping. Tested it out and the water just slides right off the boards in the phone xD amazing stuff
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

mudknot2005 said:
probably not the best idea to post a picture with your imei, in case you do get your phone working. Just throwing that out there.
Click to expand...
Click to collapse
Thanks! (pic edited)

JoJo2211 said:
Myth # 115
Click to expand...
Click to collapse
Not a myth. I can clone his IMEI. takes 5 minutes
Sent from my SAMSUNG-SGH-I337 using Tapatalk 4 Beta

Please read forum rules before posting
Questions and help issues go in Q&A and Help sections
Thread moved
Thank you for your cooperation
Friendly Neighborhood Moderator

trey.mcd said:
Worst that can happen is that it doesn't work and you sell it on ebay as "slightly used"
Click to expand...
Click to collapse
You're advocating that he scam somebody on Ebay? The **** is wrong with you?